Cell standby is using 3x more than anything else on Galaxy S6.

I had WiFi and BT off almost all day. Battery tracking indicates that cell standby is the biggest drain. For example, 25% for standby and 8% for screen. Down to 46% capacity @5hr.

Cell standby is a misleading battery statistic with some versions of Android. I have a phone that reads almost 100% cell standby, and is at the top of the list, but my battery is not affected at all. It has to do with how the phone reads the radios. The phone looks for GSM and CDMA radios. Older phones on KitKat would read correctly but some newer versions and phones will only find one radio or the other, and if you are on wifi most of the day or all day, depending on what network mode the phone reads, could be 50-100% standby. I have had a phone that did not have GSM radios in it and when in LTE the phone didnt read CDMA, so I'd have 100% standby, and if the same phone was on 3G all day, I'd have 50% standby. (GSM 0% + CDMA 100 divided by 2 radios = 50%.)

Similar Messages

How do I undo software update of v.6 on my iPad. The map ap is useless. I want google maps as I use it more than anything else. Apple map is terrible.

Spent 10 mms trying to say t he new map app is useless. As its the main thing I use on iPad I want my google maps back. Ho can I get this?

Spent 10 mms trying to say t he new map app is useless. As its the main thing I use on iPad I want my google maps back. Ho can I get this?

Can this be used on more than one computer?

Can this be used on more than one computer? (Multiple-users?)

Hi Jessica,
ExportPDF is for one user per account. Please refer to our terms... this should help with your questions!
Let me know if this helps.
Regards, Stacy

CRS Install hostname being used by more than once for the same node.

Hi, we're installing The Oracle Clusterware and on the Cluster Configuration screen of the universal Installer (the one were you specify the clustername and clusternodes) we get the following error message in a dialog box when the next button is clicked:
"You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, node1, that you entered is being used by more than once for the same node."
Has anyone experienced this error message before and know what the cause is?
Could it be a problem with the /etc/hosts file?
Thanks in advance,
M

Make sure you allocate separate IP addresses on your network for the VIP addresses on each RAC node (this is not the same as the machine IP already configured on the OS).
Also, the installer may complain if your private and public IPs are configured under the same subnet.
Finally, as mentioned before, check that name resolution for all the IPs to be used. On all RAC nodes, your /etc/hosts file should be configured with:
- public name and IP addresses of ALL nodes
- private name and IP addresses of ALL nodes
- VIP name and IP addresses of ALL nodes
Hope that helps
B.

If I purchase PS for the $9.99 per month plan, will I be able to install / use on more than 1 computer? (i.e. office and home)

If I purchase PS for the $9.99 per month plan, will I be able to install / use on more than 1 computer? (i.e. office and home)

Yes, the subscription license allows for working installations on two machines.

What happens if I post a fillable form on a website that is used by more than 500 people (any versio

What happens if I post a fillable form on a website that is used by more than 500 people (any version of Adobe Acrobat) how can I accomplish this legally.

LiveCycle Designer does not figure into this at all. The other enabling software that can allow for unrestricted use is called LiveCycle Reader Extensions. There is a version of this software available through Datalogics (www.datalogics.com) as well that may be more convenient to use.
People often bring up the scenario of making a small change and creating a new form. I don't think this would be valid and use the following as a guideline: If the form is collecting the same data for the same purpose, it's the same form
I got this years ago from some materials for LiveCycle Reader Extensions and it seems reasonable.
Note that Reader 11 can do a lot without the form needing to be enabled, such as saving a filled in form and using template features, but not digital signatures. So if you can get your users to update to Reader 11, you won't need to bother with these restrictions.

Problem with closing other firefox windows when window in use has more than 1 tab open

If I have multiple firefox windows open, and the one that I am using has more than one tab open, when I try to close one of the windows that I am not using by hovering over the firefox icon on the taskbar, then clicking the cross on the other windows, a message appears asking me if I want to close a window with more than one tab open. This means that firefox is trying to close the window that I'm using, not the one I'm trying to close. Please note this only happens when I hover over the icon on the taskbar then click the cross for the window I want to close. If I open the window properly, then click the cross on the window itself, it works fine.
Just wanted to know if anyone else has this problem, and if they do, then mozilla should probably fix it in their next update, it's getting really annoying now

I can't find a bug on file for this on https://bugzilla.mozilla.org/ (although there are many taskbar-related issues under review).
(1) Just to confirm, do you both have "Show tab previews in the Windows taskbar" turned off here:
orange Firefox button (or Tools menu) > Options > Tabs
(2) Have you tried disabling Firefox use of hardware graphics acceleration?
You usually need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
orange Firefox button (or Tools menu) > Options > Advanced
On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
If you restart Firefox, do you notice any changes?

Hello, what the **** is going now? why from my bank account taking money if i didnt use apple more than half year

Hello, what the **** is going now? why from my bank account taking money if i didnt use apple more than half year

We are fellow users here on these forums, we won't know what you are being charged for.
You can view the purchase history on your account via a computer's iTunes : if you log into your account via the Store > View Account menu option you should then see a Purchase History section with a 'see all' link to the right of it, click on that and you should then see a list of your purchases.
And did you have any auto-renewing subscriptions that you didn't cancel ? There are instructions on this page for managing and stopping them : http://support.apple.com/kb/HT4098
If nothing shows on your account's purchase history then you should contact your card issuer, or if they show but you didn't make them (unless they are auto-renewing subscriptions which you didn't cancel) then you can contact iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

I am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use ' ' with more than one recipient the save grays out. Any thoughts?

am using iPhoto 11 mail and cannot add more than one recipient in the 'to' line. When I put a comma in, the recipient's address is deleted. If I use '< >' with more than one recipient the save grays out. Any thoughts?

I figured it out. I needed to fix some errors in my account information. It works fine now.

I have a licence code for Adobe CS6 Master Collection which I'm using for more than a year, suddeny I am in trial mode (all programs) an it seems that this code is not accepted anymore. Help needed!!

I have a licence code for Adobe CS6 Master Collection which I'm using for more than a year, suddeny I am in trial mode (all programs) an it seems that this code is not accepted anymore. Help needed!!

Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

Can one computer be used by more than one itunes account holders

Can one computer be used by more than one itunes account holders or can we no longer share a home computer to access our clouds?

Hi Zhang Bin
You can create one order from multiple notification, but you cannot create multiple order from one notification.
Exmaple- You can select all notification in IW28, and create one order. All these notification will appear in object list of order.
Regards
Anil Kumar

Hi, I like using Firefox more than I do IE, but I've been using IE lately because of all the pop-up pages I'm getting. Do you have any idea how I can stop thes

Hi,
I like using Firefox more than I do IE, but I've been using IE lately because of all the pop-up pages I'm getting. Do you have any idea how I can stop these pop-up tabs from happening?
Thanks

Do a malware check with some malware scanning programs on the Windows computer. 
Please scan with all programs because each program detects different malware. 
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: Home Page: http://www.microsoft.com/windows/products/winfamily/defender/default.mspx
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Can one Recordset created in the Main/Parent form be used in more than one Subform?

Hi
Can one Recordset created in the Parent form be used in more than one Subform? The parent and subforms are unbound.
If so, how do I do this?
Many thanks for your help!
smsemail

You can declare a public object variable in the parent form's module's Declarations area:
    Public rs As DAO.Recordset
Then, anywhere in the parent form's module:
    Dim strSQL As String
    strSQL= "SELECT etc"
    Set rs = CurrentDb.OpenRecordset(strSQL)
In a subform's module, or anywhere else for that matter while the form is open, you can return a reference to the recordset as a property of the class:
    Form_YourParentFormName.rs
Ken Sheridan, Stafford, England

Can a single datasource be used by more than one Application running on the

Can a single datasource be used by more than one Application running on the system?

What, in this context, do you mean by "datasource"?

Can one Communication Channel be used in more than one sender agreement?

Can one Communication Channel be used in more than one sender agreement?

It depends on your scenario...let me tell you a case where you can use one communication channel in more than one sender agreement...
If you have an RFC sender channel this can be used in any number of sender agreements....
Thanks,
Renjith

Cell standby is using 3x more than anything else on Galaxy S6.

Similar Messages

Maybe you are looking for