Cells do not calculate

Since some time my documents with tables do not calculate cells properly. Only when I change the sellection and back again teh proper calculation is done. When I save and close the document and reopen it the same situation occurs: some cells give the wrong or no calculations at all.
Have you seen this before, and even more important, do you know a solution?

Edwin,
Only Peter saw the document that was the subject of the other thread, but he explains that Inline tables have the problem. Have you tried changing the Inline/Floating attribute to see if that helps?
You can send me the file if you want me to look at it.
Jerry

Similar Messages

All Cells are Not getting Background Color in WAD

Hello All,
I have a query with 29 Columns and Nearly 1000 Rows.
This query is being displayed through WAD.
I have used com.sap.ip.bi.rig.Format to color different columns : e.g.
1st - 8th column -> Color Green
9th - 10th -> Color Red etc.
Also, in the Analysis Web Item properties, the values are:
BLOCK_COLUMN_SIZE = 50
BLOCK_COLUMNS_STEP_SIZE = 1
BLOCK_ROWS_SIZE = 1000
BLOCK_ROWS_STEP_SIZE = 0
My Issue: For all columns , a few of the Cells are not getting colured. They are absolutely random.
When I reduce the data volume (restrict to some region), all the columns are properly colured.
Please Help to fix the issue.
Thanks,
Mainak

Closing the thread as seems below note answers my query:
1648692 Modification Format styles not applied on huge result set
Thanks,
Mainak

Excise is not calculate in invoice verification

Dear All,
I have one issue.
We have create purchase order for project with account assignment category Q.
We put excise (10.30) & Vat 15% in purchase order.
In purchase order all value calculate properly. Good Receipt created against purchase order.
Now we create invoice verification againat purchase order.
but at time of invoice verfication creatoin excise value in not calculate properly in invoice verification, only 15% vat calculate in invoice verification.
All excise detail(J1id) has been maintain for material & vendor master and i have also check tax code in FTXP. All are well maintain.
We have capture excise invoice at the time of good receipt creation.
But Excise value is not calculate
Regards,
Mahesh Wagh

Hi,
If the excise invoice is not posted (Part-II), then it will not flow in MIRO. Pls check same.
You may even check whether the capter id assigned to the material is extended to new excise calculation period.
Regards,

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don't know how indesign can do this action.

Tables with more than one cell with a high number of rowspan (ej. 619). This cell can not be print in a page and it must be cut. But I don’t know how indesign can do this action.

set the wake-on lan on the main computer
The laptop's too far away from the router to be connected by ethernet. It's all wifi.
No separate server app on the laptop, it's all samba
The files are on a windows laptop and a hard drive hooked up to the windows laptop. The windows share server is pants, so I'd need some sort of third party server running. Maybe you weren't suggesting to use Samba to connect to the windows share though?
I'm glad that you've all understood my ramblings and taken and interest, thanks The way I see it, I can't be the only netbook user these days looking for this kind of convenience, and I certainly won't be once chrome and moblin hit the market.
Last edited by saft (2010-03-18 20:38:08)

Cell border not appearing in Adobe forms

Hi,
We Placed a button in internal table cell and itu2019s property is set to invisible.
This button is set to visible based on value of other column value in the same row of table.
But border for the cell is not coming when button is invisible.
Note: the button size is equal to cell size and so when we make the button invisible ,the cell border itself is not appearing as the whole cell is invsible.
How make the cell border visible even the button in that cell is invisible.
Please put your suggestions in this regard.
Regards,
Kranti Yamparala.

Hi Kiran,
Please go through the below link:
http://help.sap.com/saphelp_nw70/helpdata/en/45/2dbb13d79f3446e10000000a155369/frameset.htm
Here the method to hide the toolbar is given. Try passing ABAP_FALSE in method: lr_method_handler->set_hide_toolbars( abap_false ) if it works.
Regards,
Vaibhav

PR00 does not calculate / deleted for TANN in R/3 for CRM order - Free Good

I hv done free good configuration both in R/3 and CRM.
Main Category - TAN and Free good category - TANN
Pricing for TANN = PR00 and ZFRE -100% discount
When I see result in R/3 and CRM, it does populate PR00 and calculate ZFRE.
While in Order creation in CRM it does calculated PR00 and ZFRE, on order save it replicates order in R/3 but in R/3 it does not calculate or retain PR00 & ZFRE value as a result I'm getting price log error in R/3 saying mandatory condition PR00 missing. Where as in CRM it does not impact calculate pricing.
Note: I don't want to retain PR00 as a mandatory condition and I don't want to change my calculation. Is there any technical solution to achieve this.
Thanks,
Nilesh P.

Hi Nilesh P,
Have you set the parameter PRICINGTYPE to G in table SMOFPARSFA as per note 490932 - 'G' = Copy price components unchanged. If so then the only possibility is to debug the transfer to ERP as per note 656823 in order to determine where the condition value is initialized.
I hope this helps.
Kind regards,
Vanessa.

Lines in shaded table cells do not render properly in pdf created in Word 2010

When creating a pdf with shaded table cells using MS Word 2010; the black lines in the shaded table cells do not show up when looking at the page at a fit page view (anything under around 60%). They print, they are there when I zoom in, but will not show up if you zoom out.
I read a forum post in Adobe here which gave some really logical suggestions, but they didn't seem to work for everyone or the level of effort was not what i can put into it. I also tried some of those and variations of those; but they didn't seem to work.
http://forums.adobe.com/thread/305508
Did anyone come up with a solution? Some people were saying it's a bug in pdf software, if that is the case, has anyone heard of a resolution?
I'm using Windows 7 and word 2010 btw, to create the pdf.
Thanks!!

Just as a test, have you tried the MS plugin for PDF creation? I have found with other versions of WORD and Acrobat that PDF Maker and the MS plugin can both fill in dots and dashes on vector graphics (basically what the border is) and yet it comes out correctly with printing to the Adobe PDF printer. Unfortunately I do not have a solution. In my case, it seemed to be related to the vector graphic itself (I could import it to InkScape or other vector graphic tool and save to EMF and it then worked fine. It may be something that MS themselves have messed up in OFFICE 2013. Good luck.

In AFAR amount is not calculate in 2008

Hello Experts,
while doing T Code : AFAR for fiscal year 2007 that time amount is calculate.
i.e: Old amt. , New amt. , Difference amt
123.00 ; 23.00 ; 100.00
while doing T Code : AFAR for fiscal year 2008 that time amount is calculate.
i.e: Old amt. , New amt. , Difference amt
00.00 ; 100.00 ; 100.00
Amount is not calculate as per the depreciation key rate in 2008.
waiting for reply.
Thanks

When you change the depreciation key it will only correct the depreciation for the current year and not old fiscal years or you have to run that old years.
When you make a change use the following transactions to correct the depreciation for the old years:
ABZU - Write-Up
ABAA - Unplanned Depreciation

Website page with jquery datepicker does not calculate dates while other pages without datepicker and all other browsers do their job

I wrote two mobile pages with dreamweaver cs5.5 and jquery. Both do online calculations. Both appear and accept input. One page using jquery datepicker does not calculate. Solely in Firefox. IE9, Safari, Chrome display correct results. Debuggers show no error. Firebug seems telling me that Firefox does not get a result from datepicker function.

Thanks. But did not help. I had done this several times before, reload, clear cache, disable extensions etc. Always used standard theme. I tried the same on two different machines, with next to last version and after having installed the latest version. In the debugger I can see that variables "zeit1" (jquery datepicker) were not filled with the datepicking results, while in all other browsers zeitX shows the current date and the app shows the results that are expected. Given that another comparable app - only without date and datepicker functions - works in Firefox I think one should explore why solely datepicker - or the function using datepicker - does not show results solely in Firefox on desktop (no mobile device with Firefox on hand) . I indeed believe that there is a mistake in my code which is detected only by Firefox (10.0.2 at the present time, with Win7 64bit - had the problem with 3.6... on another machine). Given that you could run the app with results on your machine: could it be the context of locale/culture (here: de)?
Kind regards

I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

I meet a lot of 3G signal when a call signal disappears 3G! I read the manuals and anything I find the problem! I do so with other brands and other cell does not, the same goes when I receive a call!

Who is your carrier? Are you actually on 3G?
Do you have 3G turned on or off? Settings > General > Network > Enable 3G

Setting tooltip when the content of the cell is not visible in jtable

hello,
i want to set a tooltip when the content of the cell is not visible in jtable
please guide me.
thanks
daya

thanks for your replay,
i did in this way
final TableColumn colTableColumn = getColumnModel().getColumn(vColIndex);
                    if (colTableColumn.getWidth() < this.getPreferredSize().width)
                        setToolTipText(value.toString());
                    else
                        setToolTipText(null);
                    }thanks
daya

ICP -Cell Does not support Inter company transaction details

Hi All
I have trouble in ICP.... in the metadata i configured the ICP related account and entity are correct and plug account a....
i have written the rules like
Sub Transaction()
HS.SupportsTran "S#Fullline.A#111501.C1#FLW_ST.C2#AGINGACCTREC.C3#AGINGSPECS.C4#ALL"
HS.Supportstran "S#Fullline.A#154501.C1#FLW_LT.C2#AGINGACCTPAY.C3#AGINGSPECS.C4#ALL"
End Sub 'Transaction
in the ProcessICP transaction i assigned correct way but i try to save them the message was throw *" Cell Does not support Inter company transaction details"*
.... Help me urgent
or another way to create the ICP transaction like load the ICP Data ..if possible then how i do (format)?
Regards
Kimi

Hyperion/Oracle includes examples of most of the product functionality in the sample applications. For ICT you will find examples of the metadata, data, rules, and more in the STAT application. Look under \Financial Management\Sample Apps\Statutory and you will see this syntax in the rules file:
Sub Transactions()
HS.SupportsTran "S#ActMon.A#RecltIC.C1#Closing"
HS.SupportsTran "S#ActMon.A#RecltIC.C1#Increases"
End Sub
Also check your scenario settings to ensure the frequency for IC transactions is correct.
--Chris

The system could not calculate the fiscal year start or finish date message

While running the transaction FMO1 and FMOA in funds management we have confronted with the following problem.
Message no. FI 500
The system could not calculate the fiscal year start or finish date.
WE are using year dependent fiscal year and are implementing Funds Management for the first time.
SAP Version 4.0 B
Priority Urgent
For the same problem in Version 4.5 and 4.6 there is a note number 213713 available on service.sap.com.

No, there is no bug.
Those activities that have asterisks (Stars) next to their start or finish dates (despite having no constraints) have "External Early Start" or "External Late Finish" dates, respectively, assigned to them. These dates get imported with XER and represent links to activities of those projects that are not in your database but in the external database where the XER originated from.
To remove, filter out all such activities (with stars) and delete their "External" dates. However, be aware that Start or Finish dates of such activities might change if you delete theire External dates. If getting rid of asterisks does alter your schedule, ask the person who sent you the XER to confirm start/finish dates of all such (starred) activiites.
Cheers

Numbers: two sets of numeric data in one cell. Delete, clear all deletes one set only. Cell is not "locked" Ideas?

Numbers: two sets of numeric data in one cell. Delete, clear all deletes one set only. Cell is not "locked" Ideas?

You will really need to explain in a little more detail what you mean by "two sets of numeric data in one cell".
Also, is this Numbers for OS X? You are in the iOS forum.

Hi..someone there?i am looking for an app, which can show and calculate. fully excel data from windows.until now i only found apps, which just show, but not calculate

Hi..someone there?i am looking for an app, which can show and calculate fully excel data from windows.until now i only found apps, which just show, but not calculate.anybody who know an app???

Look at the Rccharles answer on this post.
https://discussions.apple.com/thread/6033082?tstart=0
Also, you can download these free MS Office apps (Word, Excel, PowerPoint) to view (but not create or edit) these files.
https://itunes.apple.com/us/app/microsoft-word-for-ipad/id586447913?mt=8
https://itunes.apple.com/us/app/microsoft-excel-for-ipad/id586683407?mt=8
https://itunes.apple.com/us/app/microsoft-powerpoint-for-ipad/id586449534?mt=8
Microsoft Office for iPad:Early Reviews of Word, PowerPoint & Excel Apps
http://ipadacademy.com/2014/03/microsoft-office-for-ipad-early-reviews-of-the-wo rd-powerpoint-excel-apps
 Cheers, Tom

Cells do not calculate

Similar Messages

Maybe you are looking for