Cellular connectivity issue with iPad 4th gen

Hi folks,
I'm currently running iOS 7 beta 2 since it was made available for tablets on Monday. I am having a major cellular connectivity issue with Rogers. My iPhone 5 is also running iOS 7 beta 2 and has no issue with cellular connectivity (also on Rogers's network).
On my iPad, I'm having full or almost full reception but data doesn't work at all. Tried reboot and hard reboot, resets of wireless settings and nothing fixed my issue.
Is it related to iOS 7 beta 2? Is anyone having a similar issue?
Btw, model is iPad3,5.
Thanks!
Chris

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Similar Messages

No wifi connection on new iPad 4th gen

Help please ive just bought the ipad 4th gen and it wont connect to any wifi networks, im unable to complete the setup because of this. Ive tried different networks and still nothing.I have also tried reseting it but nothing same thing keeps happening, is this common with the new ipads because i have the first one and have never had any trouble connecting to wifi

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Connectivity issue with ipad 3

anybody having connectivity issues with new ipad 3?
mine won't connect to wifi.
when i switich to cellular 4g lte, that doesn't connect as well.
my macbook pro and iphone connect, with no prob.
i get various can't connect to server messages.
took to genius bar, we erased and rebooted, it worked for a bit but happening again. genius bar staff claimed it was a corrupted file, but i think its more than that?
any thougths?
many thanks,
-L

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Accessory not supported by ipad - ipad2 HDMI connector will not work with ipad (4th gen)

I am a bit frustrated with the fact that I purchased all of the adapters/connectors for my iPad 2 back in the day - and now all are pretty much worthless with the iPad (4th gen.)
The iPad g4 uses the new lightning connector. OK. So, I bought the updated adapter (lightning to 30 pin). HOWEVER, it does not allow the Apple HDMI connector to work... "This accessory is not supported by iPad"
I have to buy yet ANOTHER adapter: the Lightning Digital AV Adapter, and drop $49.00???
RIDICULOUS!

There are only other users here.
Let Apple know by posting at http://www.apple.com/feedback/ipad.html

Problem with Ipad 4th Gen

I have my new Ipad 4 only with Wifi...and i use and with the time...the batery turn to 0%...so... I charge for first Time and dont charge...appear the symbol of the Thunder but dont charge...i can't turn on... Please i Need help !!!
Thanks
Lucho
From Peru

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
~~~~~~~~~~~
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Apple Configurator Connection Issues with iPad 2s

I work at a public library that checks out iPad 2s. We have ten of them and use Apple Configurator 1.2.1 to keep them all on the same page. For some reason, though, we're now having some trouble with it.
All ten iPads lose their connection after being put into the Supervisor Mode. Sometimes the error is "internet error" and sometimes it's that the apps won't install. We've scaled back on the apps to the ones that are known good.
We're using iOS 6.1.2. Any advice would be appreciated.

Have you tried a factory reset of the homehub by pressing a pin into the recess button on the rear for about 20 seconds. This can often help wireless connections. When the Homehub is resetting, "forget" the connection to the homehub on your ipad then restart the ipad and once it has restarted, remake the connection to the homehub.

Bluetooth keyboard mapping issues with iPad (3rd gen) after iOS 6.1.2 upgrade

Others may have figured this out more readily than I did, but since I did not find a post on this topic, I decided I would provide this information.
After upgrading my iPad "3" to iOS 6.1.2, my bluetooth keyboard mapping was a bit off. Hitting most keys provided the desired result but not all.
Typing \ would result in ] for example. Typing shift + 2 would result in " rather than the expected (and marked) @.
To fix this I tried turning Bluetooth off and on, etc. No joy.
FinaIly, I went into "Settings," selected "Bluetooth," selected "Apple Wireless Keyboard," clicked on "Forget this Device."
I then powered off the iPad and the bluetooth keyboard. Next, I powered on the iPad and keyboard and went back into "Settings" where I paired the keyboard with the iPad again. Everything then worked as desired.
It's possible, that you may not need to go to the trouble of powering off and on the iPad and the keyboard. Simply "forgetting" the device and then pairing the keyboard with the iPad again may suffice.

Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use the wall-mount charger that came with the iPad and charge overnight. Admittedly the labeling is hard to read but, if you use a magnifier and squint your eyes, you'll see "Output 5.1V, 2.1A." The symbol between volts and amps is the symbol for DC. Do NOT use an iPhone charger. Do NOT use an iPod charger. Do NOT use a computer's USB port. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the exact procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know whether or not a battery problem exists.
According to Apple:
Use Your iPad Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge.

A tech issue with my 4th gen Nano - displays only the Apple icon

Hello,
I really hope that someone will be able to suggest a solution to my problem. I bought my Nano from the US about an year ago and it has been working perfectly till now... About two weeks ago I left it at home and did not use it for a week or so. After that when I took it with me one day I noticed that it was out of battery. So far so good...
After I got back home I plugged it in the PC and the problems began.. iTunes recognized it as corrupted so I restored it. Now I can upload whatever I want but it will not display anything else but the Apple icon It is not the battery as it when it is unplugged it still displays this icon.
I have been reseting it, too. No change - it just turns off and then on again - displaying the annoying icon :((((((((
It is not the cable either - I tried using it with my boyfriend's cable [he has the same iPod, the only difference is that his is 16 GB]. Again - the freaking apple stays there.
I have been restarting my computer, plugging the iPod in and out, reseting it, restoring it... I'm desperate. Please help me You are my only hope as it is already out of warranty and I'm in Bulgaria :[ oh, did I mention that I reinstalled iTunes several times, I even tried syncing the iPod with another PC - it can be synced there, too, but again - no change in the display.
It is stuck at this Apple icon and it does not make the clicking noise either.
Thanks in advance, I would REALLY appreciate any help/suggestions I'm really sad, this was a gift and I loved it :[
Petya

Try the following:
1. Restore:
http://support.apple.com/kb/HT1414
2. Recovery:
http://support.apple.com/kb/HT1808

HT5205 Why is HK carrier 1010(CSL) 4G LTE cannot be used in iPad 4th gen. I have subscribed to 1010 4G plan and under contract. However, I cannot use the 4G LTE service in the 4th gen iPad I just bought. Why Apple is so unfair ?

I have asked my local carrier 1010 about their LTE service and they said the frequency of their 4G is actually matched with iPad 4th gen but it was Apple who decided to limit their latest iPad and iPad mini 4G LTE to certain carriers but not CSL and PCCW. I think it is extremely unfair to customers who bought the the latest iPad or iPad mini(from apple store but not from telecom company) presuming they can use the 4G LTE feature.

So it's Apple's fault that you did no basic research or made any effort to find out if your carrier supported the iPad?

Why do I have to connect my ipad(4th gen) to my laptop to download apps? I downloaded some yesterday, but now they just say waiting. If I connect to ITunes, I can get them through that. I am not using cellular data, just through wifi.

Why do I have to connect my ipad(4th gen) to my laptop to download apps? I downloaded some yesterday, but now they just say waiting. If I connect to ITunes, I can get them through that. I am not using cellular data, just through wifi.
Any ideas greatly appreciated, it will save me a journey to the apple store

I have now solved it. I signed out of my iTunes account and then held down both the power buttons until the apple appeared. When I signed back in it started downloading.

I have an iPad 4th Gen with Retina Display. I want to watch movies on an airplane. I downloaded downloaded one movie successfully from digital copy, but my next movie only plays when I am connected to wifi, and the other one is the same way now

I have an iPad 4th Gen with Retina Display. I want to watch movies on an airplane. I downloaded downloaded one movie successfully from digital copy, but my next movie only plays when I am connected to wifi, and the other one is the same way now

Hi there slogrown,
You may need to download these purchases directly to the device. Take a looke at article below for more information.
Downloading past purchases from the iTunes Store, App Store, and iBooks Storehttp://support.apple.com/kb/HT2519
-Griff W.

Will the lightening to 30-pin Adapter work with the older camera connection kit on my ipad 4 iPad (4th gen) Wi-Fi, iOS 6

Will the lightening to 30-pin Adapter work with the older camera connection kit on my ipad 4
iPad (4th gen) Wi-Fi, iOS 6

Yes, see my reply to your other post.

Is anyone having any uneven or discoloured screen issues with iPad mini or iPad 4th Gen?

Hello, in view of the fact that many users had screen discolouration issues and uneven backlight issues with the iPad 3rd Gen, I wonder if those issues have been sorted out. Has anyone here had any screen issues with the iPad mini, or the iPad 4th Gen?

No.

How to use iPad (4th gen) to edit with iMovie - but using an external source such as a USB stick or external USB hard drive

Want to use my iPad (4th gen) to edit a movie using iMovie - easy enough if the movie file is on the iPad - but what if it's too large - can I keep the source file on a USB stick or external USB hard drive and edit from there? How can you do this?

You can't export any type of file using the camera connection kit, so a USB flash drive or SD card won't work.
There are some wireless external hard drives that can be used with the iPad.
The Kingston Wi-Drive, which costs $50 for the 16 Gigabyte, and then $30 more for every 16 gigs more. It works by you turning it on and then accessing the files on it from an app that you download on your iDevice. You can access music, movies, and other stuff. No connections or anything, it works like a WiFi connection, you connect to it from the setting on the iPad under wireless networks.
Then there is the Seagate GoFlex, which some would recommend over the Wi-Drive. But this one costs $199 and had 500 Gigabytes of storage. It works the sameway as the Kingston: no wires, runs over its wireless connection. You can actually fit up to 300 HD movies on it.
Another option:
Expand your iPad's storage capacity with HyperDrive
http://www.macworld.com/article/1153935/hyperdrive.html
On the road with a camera, an iPad, and a Hyperdrive
http://www.macworld.com/article/1160231/ipadhyperdrive.html
 Cheers, Tom

Ipad(4th gen) does not connect to Laserjet 100 color MFP M175nw for AirPrinting

Hi,
I have a problem with Laserjet 100 color MFP M175nw and Airprinting.
Ipad(4th gen) cannot connect to printer for AirPrinting.
Wireless Direct is set on in the printer.
When I choose to connect to printers own wifi network with my Ipad, it can't connect.
(Ipad doesn't show the wifi symbol on top left corner.)
And if I try to print with Safari, it says "AirPrint-tulostimia ei löytynyt" which means in english "No Airprint-printers found".
I have all installations by the guide book several times, but seems that this Airprint simple doesn't work.
Device Configuration show this:
Installed Personalities and Options
PCL6           (20040201)
AirPrint
PCL              (20040201)
PDF              (20040201)
PS                 (20040201)
I wonder why AirPrint has empty value? (what ever this might mean)
Br,
Heikki

Hi,
Thank you for your reply and first action plan to find a quick fix.
Unfortunatelly even though I disabled IPv6, it didn't fix the problem. Also reboot and WIFI restart has been tryed sevelar times without any help. Ipad Safari is still giving me a message "no airprint printer found".
Same problem also when I try to print so that both Ipad and printer are connected to my home WLAN/DSL-router.
I don't see any problems for the printer to connect my home WLAN, both printer and Ipad has received an IP address from the WLAN router.
My router model is Zyxel AMG1202-T10B.
Ipad is updated to it's latest SW version which is 7.0.6. and printer's firmware date is 20131028.
I have no problems printing with my Windows 7 desktop computer which is connected to same network as well.
Windows 7 PC is connected to router via Ethernet. Printer is connected to router via Wireless, not ethernet.
Here is the network settings from HP Device Toolbox:
Network Summary
TCP/IP(v4)
Status (Wireless) Ready
IPv4 Address: 192.168.1.38
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
IP Configured By: DHCP DHCP/BOOTP Server: 192.168.1.1
DHCP Expiration Time: 02:23:54 (Days:Hours:Minutes)
WINS Server: 192.168.1.1
Preferred DNS Address: 192.168.1.1
Alternate DNS Address: 0.0.0.0
TCP/IP(v6)
Status: Disabled
Network Identification
Host Name: NPI08C7AB
Domain Name (IPv4/IPv6):
Domain Name (IPv6 only):
Bonjour Service Name: HP LaserJet 100 colorMFP M175nw (08C7AB)
Bonjour Domain Name: NPI08C7AB.local.
Bonjour Highest Priority Service: IPP Printing
Wired Network Configuration
Status: Not Connected
Hardware Address: 2c:44:fd:08:c7:ab
Link Speed and Duplex Negotiation: Automatic
Auto Crossover: Enabled
Wireless Network Configuration
Status: Connected Wireless: On
Network Name (SSID): Galactica
Communication Mode: Infrastructure
Authentication Type: wpa-psk Encryption: tkip+aes
Hardware Address: bc:85:56:ee:02:d3
Access Point Hardware Address: 28:28:5d:7c:23:a0
Channel: 10
Signal Strength: Excellent
Wireless Direct Setup
Status Enabled
Wireless Direct Printing Name (SSID) HP-Print-d3-LaserJet 100 Wireless
Direct Printing Channel 10
IP Address 192.168.223.1
SNMP
Status: Read-Write Access Enabled
SNMP Version: 1
Set Community Name: Not Specified (Defaults to 'public')
Get Community Name: Not Specified (Defaults to 'public')
Network Statistics
Total Packets Received: 428
Unicast Packets Received: 414
Bad Packets Received: 0
Framing Errors Received: 0
Total Packets Transmitted: 493
Unsendable Packets: 10
Transmit Collisions: 0
Transmit Late Collisions: 0
WS-Print Users: 0
Enabled Features
IPv4: Enabled
IPv6: Disabled
DHCPv6: Enabled
LPD Printing: Enabled
Bonjour: Enabled
SLP: Enabled
WS-Discovery: Enabled
SNMP: Enabled
Show IP Address: Enabled
LLMNR: Enabled
Security PJL Security: Disabled
Please let me know if you need any other additional information.
Br,
Heikki

Cellular connectivity issue with iPad 4th gen

Similar Messages

Maybe you are looking for