Cellular Data turned off, Data Roaming greyed out and shows as on
I've googled the **** out of this and still can't find the answer so here goes.
If I have both Cellular Data and Data Roaming ON and then turn Cellular Data OFF then the Data Roaming label and ON/OFF toggle both turn grey and light blue respectively, but the Data Roaming still shows as ON (in light blue not the regular blue colour). Does this mean that Data Roaming is actually still on? If not, then why doesn't it show as OFF or are we supposed to interpret the fact that it is greyed out to mean that it is actually off when it shows ON?
You're welcome.
I don't see what difference it makes. Cellular Data off means cellular data is off. Someone who is roaming internationally with Data Roaming turned on wants data turned off completely for a period of time can turn Cellular Data off without turning Data Roaming off. When turning Cellular Data back on, Data Roaming is already on.
An iPhone can exchange SMS for certain with Cellular Data turned off, but I don't believe the same applies to MMS.
Having 3G network access on or off has 3G network access on or off only. The same amount of data will be exchanged with 3G access off only at a slower rate. If you download the same photo via a fast broadband connection vs via a much slower old dial-up connection, the same amount of data will be downloaded only slower via the dial-up connection.
Similar Messages
-
Today, I got a message from my iphone 4 telling me that my password was expired and that I had to change it.
Now I am forced to enter a 8 character long password and I cannot turn off the password lock (button is greyed out and does not react) and I cannot change to "simple" code.
I am so upset that I am considering throwing the bloody thing to the rubbish bin
Can you help?Have a work Exchange account on your phone? These policies can be enforced by a profile installed on your phone. There is nothing you can do to change this except delete the Exchange account.
-
Why is cellular data randomly greyed out on my ipad2?
Sometimes when I want to use 3G on my iPad 2, cellular data is greyed out. It only returns with a hard reboot. I have an up to date plan on at&t and am running iOS 5.1.
Not a major crisis, just wanted to see if anyone has the same problem or a solution.
Thanks.The simple and quick solution by "dale from sf" worked for me. No reboot needed.
If you do not know how to "terminate" Settings, here is the gory detail. Many words to read, just a few seconds to do.
Press the "Settings" icon to open the Settings app. Observe that Airplane Mode is OFF and Cellular Data is (improperly) grayed out.
Press the Home button once to exit Settings.
Double-tap the Home button. (The contents of the screen will slide up an inch and look like it's behind smoked glass. The bottom row of the screen--which won't look like smoked glass--will display the icons of the last few apps you have run. The Settings icon, run most recently, will be the leftmost of those icons.)
Press and hold the Settings icon (at the left end of the bottom row) for about 2 seconds until a "minus badge" (red circle with white minus sign inside) appears near the top left corner of the Settings icon.
Tap the red "minus badge". (This will "terminate" the current run of the Settings app but leave the app installed on your iPad. Your settings won't change, but if you were in the middle of a process such as joining a wi-fi network or setting up a mail account, it may not complete and you may need to restart that process from the beginning.)
Press the "Settings" icon to open the Settings app. Confirm that Cellular Data is no longer grayed out. (If it is still grayed out, this method did not work folr you, Power off the iPad and power it back on.) -
I have apple iPhone 4S upgraded to iOS 6.0.1 and everything was working fine suddenly my Wifi was not connecting and found the wifi on/off button is greyed out and to enable it I tried all resets but still my problem have not solved, still wifi is off
Same here.... No fix. Replacing is the option apparently and if you're out of warranty, you're SOL. That was as per the "Genius" at Apple.
-
I have recently purchased a Mac computer (updated to Maverick) to go with my Epson Stylus Photo RX500 printer which has given excellent service with my old Windows computer. However, when trying to print pictures or photos via Photoshop Elements 11, the best results I can get are using the Colour Management and Epson Colour controls in the printing options box.
My problem is that after printing the first photo or picture, when I come to print a second, both the Colour Management and Epson Colour Controls are greyed out and showing No Colour Management, The only way I can reset the controls is to shut down the printer and computer and restart.
Could there may be a setting somewhere that I need to adjust please? I have been in touch with Epson and they say that the Epson Colour controls are part of the Photoshop Elements software but a post on the Adobe forum brought no results and I am unable to contact Adobe.
<Edited by Host>Hello Garry. Thanks for the reply. I guess I should have used a different title from "How do I post a question?" That should come after trying to resolved the colour settings first. However, to answer your question, after experimenting with all the different settings in Photoshop Elements and Epson software, I now start with PSE11 Colour settings then click "no colour management" then after clicking Print, I choose "More Options/Colour Management/Colour Handling/Printer Manages Colour" then I choose "Page Setup/Layout/Colour Matching" which then shows Epson Colour Controls but I also choose "Layout/Colour Management" which then shows "Colour Controls/Mode" I then of course choose an Epson printer profile depending on the paper I am using. I get good results but as I said, the Colour Matching and Colour Controls are then greyed out. Hope that makes sense.
-
when i click on a link some times a new site opens with that shows clkmon as adress. when i go back to my homepage the page greys out and shows in french access site au directe. as well i constantly see a white bar that shows on the right side, when i click on the X for closing it opens the clkmon site.
thanx for the help, got rid of the problem
-
HT201415 I inserted a working sim card but iPad(2) says "no SIM" - cellular data setting greyed out
I inserted a working SIM card into my iPad 2. It picked up the network but later gave a message saying "No SIM". The Cellular Data control option is greyed out so I cannot get in to this function. I have tried removing the SIM and re-inserting as well as re-starting. This made no difference. Any suggestions why this is the case? I have tried the SIM in my iPhone 4 and it works fine. Thank you.
The SIM was taken from my iPhone. It is an extra line and was used for voice calls etc. So, it appears as though I need to get a dedicated data SIM. Appreciate the assistance..many thanks!
-
I cant be positive but I think this started when my iPhone did an automatic software update. I couldn't get any WiFi connection because when I go to turn it back on the iPhone wont let me and Greys out my WiFi on/off button.
But also I think something happened to my iCloud connect as well because next to my iCloud Drive under "Settings" it has that spinning symbol that usually denotes waiting for something to finish downloading. But this time it never stopped! Its been spinning saying "iCloud is Upgrading" for 2 weeks now! I have tried the on/off iPhone restart or reset, and I've even put my iPhone into "Recovery Mode" as a last resort. but when iTunes was finished "Restoring" it, nothing had changed; Still Greyed out WiFi button and iCloud is still "Upgrading"! Help please!Hi Ichin,
I am a bit confused with your statement -
if ((p_select_list is not null) and (p_text_field is not null)) then
return true;
elsif ((p_select_list is null) and (p_text_field is null)) then
return true;
else
return false;
end if;Here this statement -
if ((p_select_list is not null) and (p_text_field is not null)) then
return true;returning the result TRUE when both fields are not null
And this statement -
elsif ((p_select_list is null) and (p_text_field is null)) then
return true;returning the result TRUE again when both fields are null. If you see closely basically is not validating becoz it returning true whatever the input is.
I do not know what you want to use the second statement when you have else statement at the end. It will return false if one or both fields are null unless you want to validate either text field.
Hope this make sense.
Regards,
M Tajuddin
web: http://tajuddin.whitpeagesbd.com -
Wi-fi icon greyed out and showing "No Network selected"
I have an iMac (20 inch; early 2009) running Lion and use an Airport Extreme as my router. The Airport Extreme is connected to my computer and all others in the home connect through it wirelessly.
Lately, if the Mac has been off or in sleep mode, when I wake it or turn it o, I'm still connected to the internet but the wi-fi icon is greyed out. When I click on the icon, it shows "No Network Selected" and then begins searching for a network. My network pops up as an available network, but I have to choose it each time.
This never happened until a couple days ago. I haven't made any changes to software, hardware, etc. and all software is up-to-date. The only thing I've done a couple days ago was a soft reset of the Airport Extreme, as my Apple TV was acting strangely. I pushed the reset button and everything was fine with the Apple TV.
No other devices or computers on the network are having any problem with the network.
Could the soft reset have done this? If so, what can I do get the wi-fi and the network to work together again? If not, any suggestions as to how to fix this?
Also, how do I determine the generation of the Airport Extreme? It was purchased in April/May 2009.
Thanks very much.
SheriHave you tried power cycling your wireless router? First step would be to turn it off, wait a minute and turn back on. Is this router supporting other wireless equipment, such as computers, and how are they working?
Do a hard reset on the iPad, hold both the sleep and home buttons until the Apple Logo appears.
Reenter all of the network settings manually.
Then try to connect and see if it is working correctly.
Problems like this can be hard to separate router issues from iPad issues until you try several things on each. -
Purchased application in App Store (Opus Domini). Did not play will with OS X Mavericks. Deleted program to re-download from App Store. However my list of purchases shows this program as installed and is greyed out. Need to re-download. Have talked with company and they are working on an update for OS however this will take some time.
Thanks.An app is considered to be installed if it shows up in a Spotlight search of local volumes. Bring up a search window in the Finder by pressing the key combination command-F. Search This Mac for the name of the application. Delete all copies that are found.
-
I recently restored my iPhone 4s from back-up after being reset. An app that I had turned off in back-up did not show up in my recent resoration. I forgot to turn the app back on. Would there be any way I would be able to get the data from that app onto my phone? Is it possible to put an old back-up on my phone?
LukaPetranovic wrote:
Hello anita4323.
I hope this will help you with your problem:
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
You can restore your backup whenever you want from iTunes or iCloud, depending where you made it.
Let us know if you succeeded or need any further help.
I believe you are missing the point. The OP has already restored from back up, but failed to include a specific app in the back up and is trying to recover data for it, which in this case is not possible. -
By following the directions on Firefox to open up the Library tool - import & backup - The drop down choice to 'Import Data from another Browser' this choice is greyed out and unavailable. I do not know how to proceed in order to import my favorites from IE.
Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
To see all History and Cookie settings, choose:
*Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
*Deselect: [ ] "Always use private browsing mode" -
I cannot turn on my wifi! I have reset and turned off my phone multiple times and the Wifi button is completely greyed out. please help me
I had the same issue and i just resolved it, I have an iphone 4s and last night was al perfect and this morning i just verified that i had a new updated installed on my phone and my WiFi was disable and did restore as new like crazy until i did this after me being tired of restoring my phone from factory setting and then my lately back up on icloud i did my last move and it got fixed this is what i did ok.
STep #1 Do a back up manualy onto your cmputer throu itunes (NOT ICLOUD) ok
Step #2 after doing the the back up go and do on you phone or throu itunes do the factory reset setting and erase everything and make like new phone
Step #3 Leave yhe iphone conected to Itunes.
Step #4 Once your iphone is reset to factory setting on your Itunes Window will say NO SIM CARD DETECTED before clicking on your right up corner (DONE) slide your phone and it will appear conect to a network do the process and put the pasword of your WiFi and until it says conected,It will say (No Service) but it will be conected to WiFi then click on the Itunes Window (DONE)
Step #5 DO a back up recovery from the last back up you did onto your computer not Icloud ok!!
Step #6 after you recovered your phone from last back up on your computer it will atumaticaly have service and WiFi conection like before..
I hope i did explained well to you i did work for me after 7 hours of doing reset and back up =) -
A few days ago my iphone decided to stop connecting to wi-fi. I tried to connect to different wi-fi connections but my phone does not pick up any. Now my "turn wi-fi on" option is greyed out and I am unable to turn it on. I have tried reseting the network connections as well as reseting the iphone back to original settings. My network provider couldnt help. I dont know what else to do??
I had same problem. I removed the back cover, and warmed wi-fi module by hairdryer of my wife). five days wi-fi works great. I do not know what will happen next.
during operation iphone must be turned off. time of heating is near five minutes. wifi module is located upper the battery, on the upper right corner of device. -
having a problem with dates when I send my numbers doc to excel. dates are all out and that they have to cut and paste individual entries onto their spreadsheet. Any idea how I can prevent this.
I'm using Lion on an MBP and Numbers is the latest versionMay you give more details about what is wrong with your dates ?
M…oSoft products aren't allowed on my machines but I use LibreOffice which is a clone of Office.
When I export from Numbers to Excel and open the result with LibreOffice, the dates are correctly treated.
To be precise, dates after 01/01/1904 are correctly treated. dates before 01/01/1904 are exported as strings but, as it's flagged during the export process, it's not surprising.
Yvan KOENIG (VALLAURIS, France) mardi 3 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My iDisk is : http://public.me.com/koenigyvan
Please : Search for questions similar to your own before submitting them to the community
For iWork's applications dedicated to iOS, go to :
https://discussions.apple.com/community/app_store/iwork_for_ios
Maybe you are looking for
-
How to revert file associations in Win8 back to CS6?
I have tried out CC. I am not convinced of its merits and worth the money, so I let the subscription end.No problem. I have CS6. But how can I revert file associations for example for .PNG or .JPG files back to PS CS6, instead of PS CC? Everytime I c
-
Hi, In February, we had downloaded the manual bank statement (FF67), unfortunately, we had clicked wrong. After finding the problem, we tried to make a new posting but the system did not accept the second posting. In fact, the transactions should
-
TS3219 Error message "New iTunes Library"
I can't access my iTunes on my computer. I get an error message that says "New iTunes Library". What do I need to do?
-
How to load values from database into the f:selectItems value attribute
Hi, I am trying to load the drop down menu value i.e f:selectItems from the database with a list of values from a column in the databse table. how can i do this? Should i use binding? or is there any other way. Note:i am able to load values into f:se
-
Right, I've been trying to explain to BT's "support" (both online and on the telephone), the issue that I have been having. For a few years we have had a problem on our line, this saturday a BT engineer came round and found a fault in the road side b