Cellular data usage spiking while using WIFI

Over the last couple of months, we have noticed a HUGE spike in our Cellular Data usage. We have had an iPhone 5 for a little over a year and have always been under our 2GB limit. However, during October our "usage" spiked to almost 4GB resulting in additional charges. In November, we saw our "usage" spike to almost 5GB. We do not stream music nor videos and have gone as far as to turn off data for apps and images on emails. Additionally, we use WIFI at home with multiple access points to ensure complete coverage. This is maddening and extremely frustrating knowing we have not drastically changed our usage and have most likely decreased our usage based on our awareness of the issue. Verizon's solutions are to increase our plan, turn off cellular data while on WIFI, and wipe the phone. All of which are not acceptable. The suggestion that 4G results in higher data usage than 3G is just ridiculous. I will be watching our usage this month very closely and refuse to pay any overages. If it continues to climb, I will make my voice heard the only other way I know how by walking to another carrier. I have been a Verizon supporter and customer for almost 10 years however, this is unacceptable.

My findings on the matter are summarized here...
http://www.youtube.com/watch?v=47CM06N5gIo

Similar Messages

If you allow an app to use cellular data will it ever use WiFi?

In the USE CELLULAR DATA FOR settings, you can authorize cell data for individual apps and services. What I would hope is that when you are at home and operating on a WiFi network with cellular services turned off, that that would override these settings. Does it actually work that way?

That setting is system-wide, not tied to a specific app. iOS priorizes Wi-Fi over Cellular if available, so you don't normally have to turn off Cellular data.
Unless you're at work, the Net Admins have draconian restrictions on LAN traffic and can't wait to get home and download the ****, in which case going Cellular gives you a workaround, so you turn off Wi-Fi instead...

Iphone 3gs:Cellular data usage

I recently purchased iphone 3gs with 200 MB data plan. 98% of my data usage was performed using wifi but i still see in the usage section that Data sent is around 225 KB and Data received is around 550 KB. My question is
1. Whether the usage in the phone matches the cingular.com records
2. Whether wifi adds to the usage and why
3. Is there any hidden app/ acct setting which is accumulating data during the sleep mode?
4. How to stop it
Thanks

Chittoo wrote:
1. Whether the usage in the phone matches the cingular.com records
Go with whatever ATT lists for usage on their site.
2. Whether wifi adds to the usage and why
No.
3. Is there any hidden app/ acct setting which is accumulating data during the sleep mode?
There are no hidden apps. The phone does do a brief send/receive data around 2:30 am.
4. How to stop it
Turn the phone off during the night

IPhone 5 cellular data charges while using wifi - Carrier AT&T

My iPhone 5 uses cellular data even when connected to wifi.i. Although some periods show data usage while I was home asleep, other periods were while I was awake and using the wifi with another computer so I know my home network was working during this time.
When I contacted ATT support I was told that this type of data usage was normal when using wifi since the iPhone 5 was advanced and used data at all times, even when associated with wifi networks. The suggested fix was that I disable cellular data to avoid charges. This answer is unacceptable to me since it defeats the purpose of owning a smart phone in the first place .

If they are telling you it's supported, then take it to them for help Apple does not support it. They are NOT a supported carrier as far as Apple is concerned. They are NOT authorized to carry the iPhone. That doesn't mean it won't work, that means that Apple can't help you make it work. Talking to T-Mobile about how to get your phone working on an unsupported carrier is pointless. Talk to Metro PCS or go find a supported carrier... like T-Mobile.

I'm using a 16GB iPhone 4s, with the latest version of iOS 8.1.1. Whenever I go to the "Cellular" settings on the main settings page and turn OFF cellular data usage for native apps like mail, app store, contacts, photos etc , the moment I back out a

I'm using a 16GB iPhone 4S, with the latest version of iOS 8.1.1. Whenever I go to the "Cellular" settings on the main settings page and turn OFF cellular data usage for native apps like mail, app store, contacts, photos etc , the moment I back out and come back in, all the native apps I turned cellular off for are back on again. Kindly help me

Exact same question as ankit1986, specifically with the photos while on cellular-only, and as simple as it sounds, I tried the hard reboot Ingo2711 suggested. Still experiencing the same error with the native apps reverting to on. It's killing our shared data-plan (2GB).

Iphone 5 excessive cellular data usage

I am a new iPhone user and I am a bit concerned for how fast my phone burns through data. I have an iPhone 5, ios 7.0.4, and my cellphone provider is Fido in Canada (May be irrelevant info). I manually turn cellular data off whenever it's not in use. At times where I use wifi (which is about 98% of the time), I never leave cellular data on at the same time. So, I have 2 issues:
1) In system services under Cellular data usage, "iTunes Accounts" seems to be the top user of data. I looked at some previous discussions on this matter and many have said that turning off iCloud would do the trick, as well as turning off 'push'. However, I have never had my iCloud account nor "iTunes and App store," logged on. I have 'updates' and 'use cellular data' turned off as well for this feature. On top of that, under "Mail, Contacts, and Calendars' I have Fetch New Data set as 'hourly' instead of "Push". So why is it that my under system services, 'iTunes Accounts" still jumps up a few hundred kb whenever I DO have cellular data turned on.
2) How much data does the Facebook App use? Lets say I turn cellular data on, then I open up the Facebook App, and I scroll down my news feed. I do not select any pictures, videos, or profiles. I then check my data usage and somehow I burned 4mb on this specific app! I understand images take up more usage but I find that a bit suspicious.
Of course, this isn't the only app that seems to be hogging data. It's just amazing how other phone users (iphones and android users) can just leave their data on without their data randomly draining.

You are welcome
Usually data consumed by system services is on the higher side.
I would suggest reseting the data counter and then checking again after few hours to know the real culprit.
To reset the counter, there's an option "Reset Statistics", just under the list we discussed before.
This way you would get to know which app is using your data righ now.

After updated to ios 4.3.2, network cellular data usage bug..

I just updated my iphone 4 to ios 4.3.2, and I have so many problems now
I have lag problem that it takes forever to access to setting.
Also the network cellular data usage keeps changing..
I got 118TB sent and sometimes I get -162...sent I am outside of country so I didn't wanna get roaming charge so I put on airplane mode
and I turned off cellular data and the first time I checked my usage I was freaked out!
It scares me that 118TB that was sent which is ridiculous and I never ever used actually will be on my bill or something..
I am wondering if this is just an error that I can ignore..it scares me..
and is there any way I can fix it?
i have screenshots

Hard-reset didn't work multiple times.
Restore from backup didn't work either.
I called AT&T from skype on my computer and resolved the issue. Thank you for your help everyone. Here is the solution that worked for me for others to reference:
I swapped my iphone 4 SIM card with my wife's iphone 4 SIM card. Both phones received service immediately and I made successful test calls from both phones. Upon returning the SIM cards to the rightful phones, they both worked right away. I suppose just removing and reinstalling the SIM card could have worked.

IOS 8 High Cellular Data Usage

Upgraded my wife's iPhone 5 32GB to IOS 8 yesterday. About an hour after I upgraded she got an SMS from her provider saying she only had 100MB left of her data package. About a minute later she got another SMS to say it ran out. I reset Cellular Usage Statistics and bought another 250MB data bundle.
About 2 hours later she got another SMS saying she had again used up all data and that out of bundle rates apply, when I checked Data Usage it had used 297MB. She did not use the phone at all during this time.
I have disabled everything under Use Cellular Data For: long ago, except Contacts, Find iPhone, Maps, IMDB, Mail, Settings, Weather and WhatsApp.
None of these Apps had excessive usage under them, some a few KB. System Services had used 404KB.
Personal Hotspot was Off.
Everything in iCloud except for Find My iPhone is off. iCloud is signed in.
Use Cellular Data is off under iTunes & App Store
I have gone through all the Apps at the bottom of Settings and none of them have Cellular Data active.
iTunes Radio under Music is not set to use Cellular.
Is there anywhere else I can check what would be using so much data, have turned Cellular Data off for now?
I am at a loss, I upgraded my iPhone 5 16GB the same way as my wife's and I have not used any extra data, sitting at 247MB since September 1st.
My wife's phone has not changed since before the upgrade, so all settings were the same and it has never used this much data.
Any help would be appreciated.

After upgrading to the new IOS8, I noticed that my data plan just skyrocketed, and started getting those annoying text messages from AT&T about how I was eating the data like crazy, it went from 600MB to 900MB like in 15 minutes, and of course that I was getting charge $20 for it. After my second attempt trying to get an answer from AT&T I was told that the new IOS8 will open the gates to all your data (GPS, service location, etc) and received some tips on how to prevent that, try these options, I just did it myself, but not been able to pinpoint if this will stop, anyway I thought to share this info:
1) Settings>General>iCloud>Documents & Data... Scroll down and have the customer turn off Use¿Cellular Data
2) Settings>iTunes & App Store> Scroll down to AUTOMATIC DOWNLOADS and have the customer turn off MUSIC, APPS, UPDATES
3) Settings>General>Background App Refresh (turn off any apps that the customer doesn't want to automatically refresh with their information)
4) Settings>Privacy>Location Services (the customer will see all the apps that have the GPS enabled(Everything should be turned off except Setting Time Zone)
I hope this helps
Good luck

Elimininating cellular data usage

Now that AT&T is obviously trying to get us to adopt low use plans (and then be able to ding us with overage charges) I want to take control of my cellular data usage.
Even if I'm on a wifi network, if I set my "Settings|General|Usage"Cellular Network Data" stats to zero I find that I'm still sending and receiving cellular data.
Any ideas on how to determine what rogue apps are using my now precious data traffic?
What I really want is to be able to tell my iPhone not to use ANY cellular connections unless I specifically ask it to. That way I don't get random chatter sucking up my data when I'm away from wifi.

Thanks for the info! That's what I was hoping to hear.
Personally, its not worth it to give up my unlimited to save 5 bucks a month.
But my wife never goes over 100 Meg a month so we're definitely dropping her to the 200 Meg plan ($15 IS worth it.)
More important though is the fact that I'll be giving my daughter my 3GS when I get my iPhone 4 this month, and I want better control of data usage now that she'll be on a limited plan.
I do think that Apple has to provide much better tools for controlling Cellular data usage. What you describe is a nice start, but the iPhone could be MUCH smarter about making quick adjustments more obvious and easy.
One obvious solution would be to allow quick toggles to be exposed as one-click apps instead of requiring that we have to drill down through multiple screens in the Settings app.
One click to turn cellular on/off.
One click to turn wifi on/off.
etc.
The sad part is that these are all do-able by third-party developers now, but Apple for some reason doesn't allow it. (Apps that do these things have been rejected.)
What's up with that?

What causes cellular data usage to decrease if last reset has not changed? I reset every pay period cuz I do not have unlimited and was showing 125 mb sent/1.2g received. Now showing 98mb sent/980mb received. Last reset still shows same

I reset my cellular data usage every month at the beginning of my billing period so that I can keep track of how much data I am using thru out the month. I do not have the unlimited data plan and have gone over a few times. It's usually the last couple days of my billing cycle and I am charged $10 for an extra gig which I barely use 10% of before my usage is restarted for new billing cycle. FYI, they do not carry the remainder of the unused gig that you purchase for $10 which I disagree with. But have accepted. Lol Moving on.
I have two questions. One possibly being answered by the other. 1. Is cellular data used when I sync to iTunes on my home computer to load songs onto my iPhone from my iTunes library(songs that already exist)? 2. What causes the cellular data usage readings in iPhone settings/general/usage/cellular usage to decrease if my last reset has not changed? It is close to end of my billing cycle and I have been keeping close eye. Earlier today it read around 180mb sent/1.2gb received. Now it reads 90mb sent/980 mb recieved. My last reset date reads the same as before. I don't know if my sync and music management had anything to do with the decrease but i didn't notice the decrease until after I had connected to iTunes and loaded music. I should also mention that a 700mb app automatically loaded itself to my phone during the sync process. Is cellular data used at all during any kind of sync /iPhone/iTunes management? Is the cellular data usage reading under iPhone settings a reliable source to keep track of monthly data usage? Guess turned out to be more than two questions but all related. Thanks in advance for any help you can offer me. It is information I find valuable. Sorry for the book long question.

Is cellular data used at all during any kind of sync /iPhone/iTunes management? Is the cellular data usage reading under iPhone settings a reliable source to keep track of monthly data usage?
1) No.
2) It does provide an estimated usage, but it's not accurate. For accurate determination, you should check the remaining/used MBs from the carrier (most of the carriers provide this service for free).

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
          </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
          <connection-properties>
               <properties>
               <property>
               <name>xADataSourceName</name>
               <value>jdbc/SOADataSource</value>
               </property>
               <property>
               <name>dataSourceName</name>
               <value></value>
               </property>
               <property>
               <name>platformClassName</name>
               <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
               </property>
               </properties>
          </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

HT1807 I am out of the country. I turned my cellular data off and connected to wiFi . However, it is still showing that i am connected to a network. How dan i be sure that i am not being charged for roaming?network , I am still showing a network

I am out of the country. I turned my cellular data off and connected to wiFi . However, it is still showing that i am connected to a network. How can i be sure that i am not being charged for roaming?

Make sure data roaming and cellular data is turned off. If you don't want to receive calls or SMS then put your phone in airplane mode and reactivate WiFi

I am no longer able to turn off cellular data usage for individual apps. When I turn most of them off, they just automatically reset themselves to allow data usage. Any thoughts?

I am no longer able to turn off cellular data usage for individual apps.
When I turn most of them off, they just automatically reset themselves to allow data usage.
Any thoughts?

I am definately having the same problem and cannot believe there are no answers or even support that this problem exists. I never have to post on forumns, I read what is usually readilly availiable for the craziest of problems.
Anyways, the problem is just that, I can toggle off a individual app's setting of cellular data availability, but it changes right back on rescreening. After restarting, resetting etc, it seems that the big Apple Apps are the biggest offenders. Music is a very important one, Podcasts can kill you very quickly, app store, Photos, Facetime, Stocks?!?!?!
When one searches for solutions I have to see hundreds of links to "How great is ios7, you can turn off cellular data for individual apps FOR DUMMIES!". I am a dedicated apple fool since the Apple IIe (long time), but when they run afowl it is usually really bad. Why offer an on/off switch if the setting is always on?
I am writing just to add support to the existence of this problem, not so much for people to offer ideas of solutions as I now believe it is in the coding.
Thank you

Cyberoam problem while using wifi on iPhone 5

cyberoam problem while using wifi on iPhone 5

yes I have a problem. big problem which is causing an itch in my nose. I M a college student and i use wifi of my college for internet surfing and downloading from my iphone 5. for That I got to first login into cyberoam. I do so and start browsing. but the problem is,the cyberoam login page pops up every minute asking to login. it causes problem while I keep anything for downloading. it's the cause only with my iPhone 5. I use my windows pc without any problem. what is the sloution for this. I hope the question is quite clear to you.

Cellular data usage statistics just reset itself - iOS 5.0.1, iPhone 4S

My cellular data usage counter just reset itself.
It is not the first time I noticed it, it is 2nd or 3rd time since my upgrade to 4S with iOS 5.x.x.
It never happened to me previously (iPhone 3GS, iOS 4.x.x).
Any idea why?
My 4S is factory unlocked, bought in Europe if it matters.
It is on the latest iOS 5.0.1 but it happened at least once with 5.0, too.
Any help will be appreciated.
Regards,
Gitarzysta

Well I can't really say it is a problem yet, as I have only seen it happen once. There has to be logs somewhere that I can find. Might have to do some web searches. I was just wondering if anyone else has had this or seen it.
I do thank you though.

Cellular data usage spiking while using WIFI

Similar Messages

Maybe you are looking for