Cellurar Data - Mapping services

when i turn on my cellular data, mapping services start using my 3G and i don't want that!How can i disable mapping services?please help me

Hey there GiorgosAU,
It sounds like you notice that a service is using your 3G connection when you enable cellular data. If you are referring to the Maps app using your data, you can disable Maps in the Cellular settings on your phone:
Choose Settings > Cellular to view the cellular data usage for each app. Tap to turn off cellular data for an app. Contact your carrier if you have questions about your cellular data usage.
iPhone and iPad (Cellular Models): Understanding cellular data settings and usage
http://support.apple.com/kb/HT4146
If you are referring to Location Services, you an also disable that in your Settings here:
Settings > Privacy > Location Services
iOS 7: Understanding Location Services
http://support.apple.com/kb/HT5594
Thank you for using Apple Support Communities.
Cheers,
Sterling

Similar Messages

Iphone 5 Excessive Data Usage Mapping Services

I have had my Iphone 5 since December 2013. Recently I have been having problems with my cellular data usage where my phone will use more than 900mb a day. After investigating the issue I noticed that the biggest problem is mapping services. This was not making sense as frequent location settings and all location settings are switched off. I went to my service provider MTC (This is the service provider in Namibia, Africa) and they advised me to upgrade to IOS 7.1.2. According to them Apple has made more services available on our carrier and that I needed the newest IOS to be able to manage these services.
I have updated my IOS to 7.1.2 yesterday 28 July at 12:00. Since then till yesterday afternoon at 17:00 my phone used over 500mb of which 418mb was for system services which after investigation revealed that 415mb was for mapping services. The location settings and frequent location settings are still switch off, but I am still using data for mapping services. The data in Namibia is not the cheapest and this has caused me to have to switch off my cellular data to ensure that I don't run my cellphone bill through the roof. I am now sitting with an equivalent of a Nokia 3310 as I can only sms and phone from my Iphone. I do not have access to WIFI so using that is not an option.
I have a friend with a Iphone 5S and one with and Iphone 4 and they do not seem to have the same problem as I do. Is it only Iphone 5?
If anyone has the same problem, I hear that it is also the case in South Africa, please help me make it heard by Apple or give me a solution if you have one.

I see about 500MB for "Time & Location" tracking. You can check here: Mobile Network -> System tasks -> Time & Location (roughly translated from German iOS 7 menu. Can someone please write down the correct english menu entries?).
I believe it is the Google App (https://itunes.apple.com/de/app/id284815942?mt=8), which is tracking me (https://maps.google.com/locationhistory/b/0). I like beeing tracked since i'm sometimes curious where i have spent my time;). But 500MB is far too much - i have only 1GB per month.

How to map service contract data from ecc to crm

Hi Experts,
Please help me,how to map service contract data from ecc to crm system.
is there any perticular process.please let me know.
thanks in advance..

Hi Srinivasulu,
Create the service contract type of ECC and also item categories under it in ECC in CRM. Map the number ranges.
Check the Partners mapping from R/3 to CRM and that will be all.
I tried but in CRM in the transaction type internal number range is mandatory. So, if you create service contract in ECC with one number it will replicate to CRM but with different number. But you can see ECC number under the transaction history in CRM.
Good Luck.
Sharath.

Fix for excessive data usage for "mapping services"?

I'm experiencing a problem where my iPhone 4S running iOS 7.1.2 (though I saw this problem with 7.1.1 as well) uses huge amounts of cellular data (500 MB+) while sitting idle. Looking at usage in the Cellular section of settings reveals that the data is being used for "mapping services" under system services. I've turned off location services for all but a very few apps that truly require it. I've also turned off background refresh for all apps, cellular data for most apps and system services, as well as turning off the frequent locations feature. Unfortunately, even after making these changes, the problem occurs. Some searching does reveal a few other people reporting this (e.g. here). Unfortunately, I haven't found any reports of working solutions.
I'm traveling in Africa, and using relatively expensive prepaid data, so this problem is actually costing me real money, having used up 2 GB (~$60). If anyone has seen this and discovered a real fix, I would love to hear about it!

I had the same problem. Mapping Services used 1G of data over night while I was sleeping. My location services are turned off and anything else that could use mapping services. I reported the problem to Vodacom (Network service provider in South Africa) and they told me they had numerous complaints regarding this and they are going to refund my money, BUT they cannot tell me how to solve the problem going forward. Vodacom advised that Apple are upgrading their maps from Google Maps to their own iMaps application and that is why the data is being depleted in the background. This makes no sense to me though. How can they take data from customers to upgrade their systems. Very frustrating.
My next step is to go into the apple store and see if they can do anything. If I happen to find a solution from apple I will be sure to let you know!

MY phone is using large amounts of data, when i then go to system services, it s my mapping services thats causing it. what are mapping services and how do i swithch them off. i really need help.

MY phone is using large amounts of data, when i then go to system services, it s my mapping services thats causing it. what are mapping services and how do i swithch them off. i really need help.

I Have the same problem, I switched off location services, maps in data, whatever else maps could be involved in nd then just last nite it chewed 100mb... I'm also on vodacom so I'm seeing a pattern here somehow. Siri was switched on however so I switched it off now nd will see what happens. but I'm gonna go into both apple and vodacom this afternoon because this must be sorted out its a serious issue we have on our hands and some uproar needs to be made against those responsible!

What are mapping services and why they use so much cellular data?

I previously had an iphone 5 and my monthly cellular data consumption was about 250MB.
I recently switched to an iphone 5S and the cellular data usage is about 250MB per week!
I try to monitor and reduce the usage but the mapping services in system services is always very high!
What is this? Can I reduce it?

Mapping Services ( story ) :
In April 2011, iPhone and iPad users were surprised to discover that, not only was their device keeping track of where they’d been, it also was storing very detailed location information in a plain-text file on the phone. The data was derived by the cell towers and Wi-Fi hotspots the devices encountered, and was added anonymously to a crowdsourced database.
Apple later said the devices were keeping more information than intended due to a bug, and issued a patch that reduced the amount of data. But, because it was used to improve and speed up location services, the practice continued.
And now, in iOS 7, Apple has added a tool that lets you see what your iPhone knows about where you go.
If you’ve got an iPhone 4S or later running iOS 7, follow these steps:
1. Go to Settings, then Privacy > Location Services.
2. Scroll to the bottom of the list of apps that use Location Services (and feel free to marvel at how many apps do!). Tap System Services.
3. Tap on Frequent Locations, then scroll down and look at History. You’ll see at least one city there, more if you travel.
4. Tap a city. You’ll see a list of locations you’ve visited in the city.
5. Tap a location. You’ll see a list of the dates and times you visited that location.
Why in the world would Apple collect this kind of detail about your movements? It does so to enable features like Next Destination, found in the Notification Center, which is the screen you see when you swipe down from the top of the iOS display. Next Destination looks at your travel patterns and offers information about how long it will take to get to the next place you typically visit during the day.
If having all this location data collected by your iPhone makes you nervous, you can turn it off at Settings > Privacy > Location Services > System Services > Frequent Locations. Note that it is turned on by default, so if you don’t want your phone logging your whereabouts, you’ll need to turn it off.
The Next Destination feature is similar to one found in Google Now, which uses location and your habits to offer up useful information without your asking for it. Google Now is found in the Google Search app on both Android and iOS. On Android, you can add a Google Now widget to your home screen to make the feature more accessible.
In fact, Google collects similar information about you – and in greater detail - if you use its location-based products. Google stores your location data on the Internet, and you can see it on any Web browser.
Make sure you’re logged into your Google account – say, through Gmail – and then go to google.com/locationhistory. You’ll see a map showing location visits for today, but click the Dashboard link at the top of the page and you’ll see this:
To turn this off, click the gear icon in the upper right corner of the Location History page and choose History Settings. Then, click Disable and Save. There’s also a History Management link that lets you delete history items that have already been collected.
Location services are really an integral part of a ton of iOS apps, using the internal GPS system to add Instagram photos to a map, checkin with FourSquare or Facebook, or let your friends know where you are with one of many “on my way” apps, like Glympse or Twist.
If you’re battery is dying, however, the location services are the first thing you should turn off, as they suck up a lot of your iPhone, iPad, or iPod touch’s power needs, what with their background data sending and receiving and such.
Here’s how to turn them off.
Tap your Settings app to launch it, and then tap on Privacy. You’ll be able to turn the toggles OFF for any specific app that has privileges to access your GPS location by scrolling through the list and tapping them all. I do this on a fairly regular basis for both privacy and battery savings. I figure that with less apps accessing my location, the less battery power in total is being used for that function.
If you want to turn off Location Services completely, then simply tap the main toggle at the top to OFF, and you’ll stop using them. This will keep your apps that need it, like Maps or Compass, from knowing where you are, but the battery will thank you.
Follow the above steps to turn off Location Services :

Adaptor meta data &mapping templtes

hi
1. explain about adaptor meta data &mapping templtes what does use with them?
2.what is exchange fault data and exchange log data under data types
3.what are web as apart from 6.2 and 6.4?
4.describe about sap xi 3.0 like SP's what are types
5.about content
pls give details mentioned above .
thanks & regards

>>1. explain about adaptor meta data &mapping templtes what does use with them?
Adapter Metadata is the foundation configuration for the Adapters used in XI for message transfer. The functions provided allow either the creation of new Adapters or the modifications of existing ones.
Just like you can reuse data types in different message types, you can also save parts of message mappings as Mapping Templates and reuse them elsewhere. Once you have saved a mapping template it serves as a copy template that you can then load into other message mappings and modify to fit your requirements.
>>2.what is exchange fault data and exchange log data under data types
Fault message types contain data types defining application errors. Application errors are errors that occur on the inbound side of a message transfer when the application could not process successfully.
>>3.what are web as apart from 6.2 and 6.4?
The Web Application Server is a platform for efficient development and allows you to implement Web applications. It builds upon proven and stable application server
technology and Internet-based infrastructure from SAP.
>>4.describe about sap xi 3.0 like SP's what are types
check http://service.sap.com
>>5.about content
The contents of the Integration Repository are collectively known as XI Content (Process Integration Content); XI content is the integration knowledge that is required for describing collaborative processes (collaboration knowledge).
For an overview of the XI Content currently provided by SAP, see SAP Service Marketplace at http://service.sap.com/solutions -> SAP NetWeaver -> SAP NetWeaver in Detail -> Process Integration -> SAP Exchange Infrastructure -> SAP XI in Detail -> XI Content Catalog.

Error during mapping service, RFC-XI-File Adapter

Hello,
I have the following problem: I am using RFC to send some data to XI and then to File Adapter, however I get a short dump with "5990 Error during mapping service in XI". Even though mappings works, I tested using the document that comes in XI in Repository without any errors.
       What does this error means and is there any way to get more detailed explanation of my error. Thank you in advance for your help,
               Dmitriy Mindich

Synchronous RFC
1. CALL FUNCTION func DESTINATION dest
                     parameter_list.
Asynchronous RFC
2. CALL FUNCTION func STARTING NEW TASK task
                [DESTINATION {dest|{IN GROUP {group|DEFAULT}}}]
                parameter_list
                [{PERFORMING subr}|{CALLING meth} ON END OF TASK].
Transactional RFC
3. CALL FUNCTION func IN BACKGROUND TASK
                     [DESTINATION dest]
                     parameter_list
                     [AS SEPARATE UNIT].
Use help function of your ABAP editor for more details.
Regards
Stefan

What is data mapping in EDI?

Hi all,
Is 'data mapping' same as creating an FMD or different? Where can I get FMDs for a message type in SAP? Eg Edifact to IDoc or Idoc to ANSI x12??
Thanks,
Charles.

Hello Charles
Have a look at [http://service.sap.com/ale]:
ALE and EDI
EDI Applications
There you will find very useful documents about EDI mapping.
Regards
Uwe

Help needed in developing web map service for mobile devices

please can any one help me(with source code if possible) for developing the web map service client for mobile devices in J2ME.

There are a couple of ways you could do this. Bluetooth communication is available on a few J2ME devices, so you could do it through that. Or you could set up a servlet on the J2SE app end and send the data over the internet (check out HttpConnection). I'm not sure of any other quick and easy methods.

Input for nested data structure service

I plan to use a service which require some header-information and additional 1...n item-information.
The data structure of this service is nested, means there is only one input-port for the header AND the nested items.
Is it somehow possible to create a UI consists of two inputs like one input form for the header and one input table for the items on the inputport??
The main problem is that either the header or the item information is transported to the input port of the service, never both as required by the service. Tried to solve it using a data bridge (or as it called in Ehp1 for 7.1 "data share") without any success.
Solved it by myself Just forgot to check "Control Buttons" in the Configure tab of the table.
Edited by: Stefan Witschel on Nov 18, 2008 1:47 PM

Yes, I still used it.
In Ehp1 is a feature that automatically add a data share if you drag and drop the input port of your servce with nested structure anywhere on the screen. On this data share you can add another input form or table for the nested elements. Both forms/tables than are connected at the input with the share.
Finally you do the data mapping for the nested structure and define an action to call this connection.
Actually my problem was that I couldn't input data in rows of a table for the nested structure. I solved it by enabling the table controls which allows you to add an delete rows.

Mapping service

We run an internal mapping service utilizing a Digital UNIX printer queue. Users use a variety of front ends to post a file of map options to a printer queue where our Geographic Information System picks them up, builds the map and sends it to a printer (one of the map options). We want to extend this to allow an outside user to email these map options, and to have the map sent to them (return email one of the map options). I've done most of the work using the JavaMail API from the demo scripts but need help to get the string of map options to the appropriate UNIX printer queue. A java monitor program on the UNIX box where the printer is polls the mail server for new messages. I hope someone can share their thoughts on this...

hi
I am having the exact same problem, over 1g used for mapping services!!!!! reset data usage mapping services stilled showed data being used. even after switching cellular data off individually on all apps and location services it was still using data
I restarted my phone 5s then it stop using data , was to afraid to switch my cellular data back on
this is ridiculous.
I eventually switched cellular data on for whatsapp and instagram
No usage for mapping services at the moment!!!!!
"(which was not turned off before and previous months I did not have any problems)"

Failed to open the console and System Center Data Access Service wont start - SCOM 2012

Log Name: Operations Manager
Source: Data AccessLayer
Event ID: 33333
Data Access Layer rejected retry on SqlError:
Request: ManagementGroupInfo
Class: 16
Number: 208
Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
=============================================================
Log Name: Operations Manager
Source: OpsMgr SDK Service
Event ID: 26380
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
   at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
=============================================================
Failed to connect to server ' xxxxx'
Date: 16/09/2013 20:36:16
Application: Operations Manager
Application Version: 7.0.8560.0
Severity: Error
Message: Failed to connect to server 'xxxxxx'
Microsoft.EnterpriseManagement.Common.ServiceNotRunningException: The Data Access service is either not running or not yet initialized. Check the event log for more information. ---> System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService.
The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724. ---> System.Net.Sockets.SocketException: No connection could
be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   --- End of inner exception stack trace ---
   at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(Exception ex)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore clientCallback)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[T,P](EnterpriseManagementConnectionSettings connectionSettings, ClientDataAccessCore callbackDispatcherService)
   at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(EnterpriseManagementConnectionSettings connectionSettings, ManagementGroupInternal internals)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Common.ManagementGroupSessionManager.Connect(String server)
   at Microsoft.EnterpriseManagement.Monitoring.Console.Internal.ConsoleWindowBase.TryConnectToManagementGroupJob(Object sender, ConsoleJobEventArgs args)
System.ServiceModel.EndpointNotFoundException: Could not connect to net.tcp://xxxxx:5724/DispatcherService. The connection attempt lasted for a time span of 00:00:02.0020300. TCP error code 10061: No connection could be made because the target machine actively
refused it xxx.xxx.xxx.xxx:5724. ---> System.Net.Sockets.SocketException: No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   --- End of inner exception stack trace ---
Server stack trace:
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.BufferedConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
   at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)
   at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
   at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)
   at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService.Connect(SdkClientConnectionOptions connectionOptions)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Initialize(EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
   at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[T](EnterpriseManagementConnectionSettings connectionSettings, SdkChannelObject`1 channelObjectDispatcherService)
System.Net.Sockets.SocketException (0x80004005): No connection could be made because the target machine actively refused it xxx.xxx.xxx.xxx:5724
   at System.Net.Sockets.Socket.DoConnect(EndPoint endPointSnapshot, SocketAddress socketAddress)
   at System.Net.Sockets.Socket.Connect(EndPoint remoteEP)
   at System.ServiceModel.Channels.SocketConnectionInitiator.Connect(Uri uri, TimeSpan timeout)
=============================================================
Log Name: Operations Manager
Source: OpsMgr Root Connector
Event ID: 28001
The Root connector received an exception from the Config Service on StateSyncRequest:
System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
Server stack trace:
   at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
   at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
================================================================
Log Name: Operations Manager
Source: OpsMgr Management Configuration
Event ID: 29105
The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
Operations Manager database version: 1.0.0.0
Minimum required version: 7.0.0.0

Yes, i change the credentials, but doesnt work.
Yes, i put the events in the
main question!
Events Logs:
=======================================================
Log Name: Operations Manager
Source: Data AccessLayer
Event ID: 33333
Data Access Layer rejected retry on SqlError:
Request: ManagementGroupInfo
Class: 16
Number: 208
Message: Invalid object name 'dbo.__MOMManagementGroupInfo__'.
=======================================================
Log Name: Operations Manager
Source: OpsMgr SDK Service
Event ID: 26380
The System Center Data Access service failed due to an unhandled exception.
The service will attempt to restart.
Exception:
Microsoft.EnterpriseManagement.Common.SdkServiceNotInitializedException: The Data Access service has not yet initialized. Please try again.
   at Microsoft.EnterpriseManagement.ServiceDataLayer.DispatcherService.get_Container()
   at Microsoft.EnterpriseManagement.Mom.Sdk.Service.SdkSubService.SdkChannel.Start()
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallbackInternal(_ThreadPoolWaitCallback tpWaitCallBack)
   at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback(Object state)
=======================================================
Log Name: Operations Manager
Source: OpsMgr Root Connector
Event ID: 28001
The Root connector received an exception from the Config Service on StateSyncRequest:
System.Runtime.Remoting.RemotingException: Failed to connect to an IPC Port: The system cannot find the file specified.
Server stack trace:
   at System.Runtime.Remoting.Channels.Ipc.IpcPort.Connect(String portName, Boolean secure, TokenImpersonationLevel impersonationLevel, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.ConnectionCache.GetConnection(String portName, Boolean secure, TokenImpersonationLevel level, Int32 timeout)
   at System.Runtime.Remoting.Channels.Ipc.IpcClientTransportSink.ProcessMessage(IMessage msg, ITransportHeaders requestHeaders, Stream requestStream, ITransportHeaders& responseHeaders, Stream& responseStream)
   at System.Runtime.Remoting.Channels.BinaryClientFormatterSink.SyncProcessMessage(IMessage msg)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at Microsoft.EnterpriseManagement.Mom.Internal.IConfigService.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
   at Microsoft.Mom.Connectors.Root.RootConnector.OnStateSyncRequest(Guid source, UInt64 messageIdentifier, String cookie)
=======================================================
Log Name: Operations Manager
Source: OpsMgr Management Configuration
Event ID: 29105
The management group is not yet fully upgraded. OpsMgr Management Configuration Service will idle until upgrade is completed.
Operations Manager database version: 1.0.0.0
Minimum required version: 7.0.0.0

No organization data for service products

Hi,
I create a CRM service order with a service product. Now there is a message, that the product in sales organization and distribution channel is not scheduled.
Our service products in general don't have organization data, cause they occur from r/3 service master data (transaction ac03).
How to assign org.data to service products in CRM? I cannot assign the set type for org.data to the category of service products cause we download the products with the middleware from R/3.
Regards
Jochen

Hi
Sercie products will be created in CRM in service product type, while creating a service product you have to assign the Organizational data in sales and distribution tab
Thanks
Satheesh

"unable to connect to the data access service" installing report server

Trying to do a 2 server SCOM 2012 R2 install on Server 2012 w/SQL 2012. Management server and operations console on one, and SQL, web console, and reporting server on the other. When I get to the web console and reporting server install, and
the "Specify Management Server" screen, I input the 1st management server name and it gives me a red X with the message:
"Unable to connect to the Data Access service for this management server. Ensure the Data Access service is running and that the service, the management group, and setup are all the same version."
Here is the setup log error:
"Info: :Could not connect to Management Server: scom-app with exception: Threw Exception.Type: System.ArgumentException, Exception Error Code: 0x80070057, Exception.Message: Version string portion was too short or
too long."
I don't see the "Data Access" service in services on either server. I followed all of the setup prereqs in SCOM 2012 unleashed book, and also referenced this article for setup advice:
http://blogs.technet.com/b/kevinholman/archive/2013/01/16/opsmgr-2012-sp1-quickstart-deployment-guide.aspx
Everything seems to be working until I get to this point.
Thank you for any help you can provide,
Dan

Hi Tom,
1. Did the setup complete successfully on the MS and Console server?
>>>Yes, without issue
2. You do not see the service "System Center Data Access Service"
>>>I do indeed see it on the MS and Console server, it is set to Auto and running. (I also tried rebooting this server and retried, no help)
3. Is the Windows Firewall enabled?
>>>It has symantec endpoint protection. I disabled symantec completely on both servers and retried, no help.
Thx,
Dan

Cellurar Data - Mapping services

Similar Messages

Maybe you are looking for