:censored: are the beep codes? KT2 combo mobo help
yeah, i looked and looked and looked, no where in my motherboard users manual (, who does that????????) and there is NO section outlining the beep code values. ?>??? :O X( X(
anyhow, i think my problem is that the system refuses to boot when set to 100mhz FSB. Since i know that my 1.1ghz T-bird is a 100fsb chip, when i set the fsb to 133 (so that the system would frickin boot), i just get a bunch of beep codes. The thing is that the board just WILL NOT BOOT when i set the FSB to 100mhz. if i switch it over to 133, it boots but beeps at me. Faulty board? I just barely got it in the mail from newegg.
thanks.
btw, the proc seems ok. i've burnt a ton of procs up so i reckognize the smell from a mile away and i dont smell anything. i'll take off the heatsink now just to be sure.
Thanks, i'm kinda pissed cuz when i put in my 600 mhz Duron, i fried it. Lord know how as there are NO burn marks ANYWHERE on the chip, but its a goner. when i took it out i could feel that even the ceramic was hot. :O (thats me swearing)
so now i'm down a 1.1 t-bird, a 600 duron, and a KT2 Combo board because it will not boot when you set it to 100 FSB.
Similar Messages
-
I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggestions?
In the course of your troubleshooting to date, have you worked through the following document?
iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device -
What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO gnrly
Hi all,
What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO generally?
Help will be surely rewarded.
Thanks and Regards,
Creasy> What are the transaction codes we use for LSMW in MM, SD, PP & FI/CO generally?
General threads about LSMW in MM, SD, PP, FICO will be locked and deleted generally.
> Help will be surely rewarded.
&********************** Please read "the rules" if found usefull... ************************&
Cheers,
Julius -
What are the T-codes that contain the master data for material and vendor?
what are the T-codes that contain the master data for material and vendor?
hi ,
- Display Material tcodes...
MM01 - Create Material
MM02 - Change Material
MM03 - Display Material
MM50 - List Extendable Materials
MMBE - Stock Overview
MMI1 - Create Operating Supplies
MMN1 - Create Non-Stock Material
MMS1 - Create Service
MMU1 - Create Non-Valuated Material
ME51N - Create Purchase Requisition
ME52N - Change Purchase Requisition
ME53N - Display Purchase Requisition
ME5A - Purchase Requisitions: List Display
ME5J - Purchase Requisitions for Project
ME5K - Requisitions by Account Assignment
MELB - Purch. Transactions by Tracking No.
ME56 - Assign Source to Purch. Requisition
ME57 - Assign and Process Requisitions
ME58 - Ordering: Assigned Requisitions
ME59 - Automatic Generation of POs
ME54 - Release Purchase Requisition
ME55 - Collective Release of Purchase Reqs.
ME5F - Release Reminder: Purch. Requisition
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB21 - Create Reservation
MB22 - Change Reservation
MB23 - Display Reservation
MB24 - Reservations by Material
MB25 - Reservations by Account Assignment
MBRL - Return Delivery per Mat. Document
MB1C - Other Goods Receipts
MB90 - Output Processing for Mat. Documents
MB1B - Transfer Posting
MIBC - ABC Analysis for Cycle Counting
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI01 - Create Physical Inventory Document
MI02 - Change Physical Inventory Document
MI03 - Display Physical Inventory Document
MI31 - Batch Input: Create Phys. Inv. Doc.
MI32 - Batch Input: Block Material
MI33 - Batch Input: Freeze Book Inv.Balance
MICN - Btch Inpt:Ph.Inv.Docs.for Cycle Ctng
MIK1 - Batch Input: Ph.Inv.Doc.Vendor Cons.
MIQ1 - Batch Input: PhInvDoc. Project Stock
MI21 - Print physical inventory document
MI04 - Enter Inventory Count with Document
MI05 - Change Inventory Count
MI06 - Display Inventory Count
MI09 - Enter Inventory Count w/o Document
MI34 - Batch Input: Enter Count
MI35 - Batch Input: Post Zero Stock Balance
MI38 - Batch Input: Count and Differences
MI39 - Batch Input: Document and Count
MI40 - Batch Input: Doc., Count and Diff.
MI08 - Create List of Differences with Doc.
MI10 - Create List of Differences w/o Doc.
MI20 - Print List of Differences
MI11 - Physical Inventory Document Recount
MI07 - Process List of Differences
MI37 - Batch Input: Post Differences
for vendor..
XKN1 Display Number Ranges (Vendor)
XK01 Create vendor (centrally)
XK02 Change vendor (centrally)
XK03 Display vendor (centrally)
XK04 Vendor Changes (Centrally)
XK05 Block Vendor (Centrally)
XK06 Mark vendor for deletion (centrally
XK07 Change vendor account group
XK11 Create Condition
XK12 Change Condition
XK13 Display Condition
XK14 Create with cond. ref. (cond. list)
XK15 Create Conditions (background job)
reward points if useful,
venkat. -
What r the trns code for maintenance view, help view and projection view
hi all
what r the transaction code for maintenance view, help view and projection view
can anyone tell me how to create maitenance, help and projection view.
with an example
regs
hari<b>What is the Different Types and Usage of Views
The followings are different types of views:</b>
- <b>Database View (SE11)</b>
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- <b>Help View ( SE54)</b>
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
-<b> Projection View (SE11)</b>
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
<b>- Maintenance View ( SE54 )</b>
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
reward points if it is usefull...
Girish -
I have a problem with the pop-up prompt to enter my serial number for installation, it won't pop up when I entered the redemption code. Can someone help?
There is no pop up. There is a window that is part of the installation process. If you entered a wrong number, like a redemption code, you would have wound up installing it as a trial. In that case, go to the Help menu in the editor and look for an option there.
If that isn't what you're talking about, you really need to explain in more detail. -
How are the source code in the functions? Blank?
In my SAP the source code of the some functions are blank.
Is this correct?
Can you view in your Systems and put the result, please?
Functions:
LSO_COL_GET_ROOM_PRIVACYTYPES
LSO_COL_GET_ROOMS
So, when i will to test, the functions return System Failure
Thanks for Help.Hi,
In our system in blank too.
This is a RFC it means that others systens connect into this FM and it means that the implementation must be in the FM not in the other system.
The note 1316954 - Integration: Collaboration for SAP NetWeaver 7.01 talks about the FM LSO_COL_GET_ROOMS.
Best regards,
Caíque Escaler -
ECATT :what are the OK Code mean in TCD recording
HI ,
Please expain about various
OK Code i.e.
=FURT,
=TRSL,
/00,
=CREA,
=ENTE,
=ZCOD,
=ZPAT ,
=OPT2
etc.
They can be seen in forground running of the eCATT test scripts .
Regards, Jaspal.HI Jaspal,
I am sorry to say but I do not have a list as such.
OK CODES are the function names for any buttons. If you could use the F1 help on the button you require, you would get the OK CODE relevent for it.
If you find no buttons and still see an OK CODE for any DYNPRO's in TCD, you can directly enter the OK CODE in the Command field(where in you enter the transaction).
IF you enter the OK CODE value in the Command field, that would work as executing the TCD in foreground.
Try to execute your TCD in Foreground and you would see how & what OK CODE does. Try to re-produce the same steps manually giving the OK CODE in the Command field, the way you have recorded and you could see how a TCD works.
Hope this helps..
Best regards,
Harsha
PS: Reward points for all those responding to your message.
Message was edited by:
HarshaChaithanya Kethepalle -
How to know what are the T Codes used by client in SAP HR module in qualit
hi experts,
i have a access of quality server given by my client in SAP HR.I dont know what are the Tcodes used by client.So how i can know what are the Tcodes client is using frequently.i have to list out all TCodes urgently.
PLZ reply ASAP.
Thanx in advance..Hi
You can do this by going to SUIM-Transactions-Executable for User
Then give the user name/id as in user master record and execute. Now the system will display the list of transaction codes used by that particular user.
Regards
Santhosh.S -
Does anyone know the difference between KT2 Combo and K7N2G?
I bought a KT2 combo (ms-6764) because my ms-6341 went bad,and msi sent me a k7n2g (ms-6341 v.1.1). Does anyone know which has more or better features? Thanks much
KT2 Combo-L: VIAs KT266A Chipset onboard, SDR DIMM and DDR DIMM support, low price board, FSB266 support
K7N2G: nVidias nForce2 IGP MCP Chipset onboard, high performance Chipset, FSB333 support, graphics onboard (comparable to the GF4 MX, if Dual Channel is used), Dual Channel DDR400 support
The K7N2G is way better, than the KT2 Combo-L. But see yourself:
KT2 Combo-L: http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=408
K7N2G: http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=398
greetz sj -
Error message while compling the following code.can some body help me?
Hi all,
I wrote a simple program which connects to oracle 9i which uses thin driver,
the following code is
import java.io.*;
import java.sql.*;
import oracle.jdbc.*;
import oracle.sql.*;
import javax.sql.*;
class JdbcVersion
public static void main (String args[])
throws IOException, SQLException
//Register Oracle's Driver
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
//Build the connection string.
String connString ="jdbc:oracle:thin:@(description=(address_list=" +
"(address=(protocol=tcp)(port=1521)(host=home-f831b673e0))" +
"(address=(protocol=tcp)(port=1521)(host=home-f831b673e0)))" +
"(connect_data=(sid=PLSExtProc))" +
"(source_route=yes))";
Connection conn = DriverManager.getConnection(connString, "<username>", "<password>");
// Create Oracle DatabaseMetaData object
DatabaseMetaData meta = conn.getMetaData();
// gets driver info:
System.out.println("JDBC driver version is " + meta.getDriverVersion());
and after compling this code i am getting an error message that
C:\>java JdbcVersion
Exception in thread "main" java.sql.SQLException: Io exception: Software caused
connection abort: recv failed
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at JdbcVersion.main(JdbcVersion.java:24)..
can any one help me in this regards??hi nthali,
now i wote a simple code as you suggested....and again encontering with new problem
import oracle.jdbc.*;
import java.sql.*;
public class Test {
public Test() {
public static void main(String[] args) {
Test test1 = new Test();
test1.test();
public void test(){
try{
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection("jdbc:Oracle:thin:@localhost:PNPKEY:'scott':'tiger'");
Statement stmt = conn.createStatement();
ResultSet rs = stmt.executeQuery("select * from player");
while(rs.next()){
System.out.println(rs.getString("id"));
// System.out.println(rs.getString("name"));
catch(Exception e){
e.printStackTrace();
this is java code...
and while running it is giving me an error like this....
C:\work>java Test
java.sql.SQLException: invalid arguments in call
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java)
at oracle.jdbc.ttc7.TTC7Protocol.logon(TTC7Protocol.java)
at oracle.jdbc.driver.OracleConnection.<init>(OracleConnection.java)
at oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver.ja
va)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java)
at java.sql.DriverManager.getConnection(Unknown Source)
at java.sql.DriverManager.getConnection(Unknown Source)
at Test.test(Test.java:14)
at Test.main(Test.java:9)...
can you help me??? in this problem...please?? -
I don't know why but itunes just suddenly wouldn't accept the security code???
Is the address on your iTunes account exactly the same (format and spacing etc) as on your credit card bill : http://support.apple.com/kb/TS1646 ? If it is then you could try what it says at the bottom of that page :
If the issue persists, contact your credit card company and verify that they and any company they use to process credit card authorisations have the correct information on file.
And/or try contacting iTunes support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
When are the unlock codes coming out (Canada) for the new iPhone 4?
I was told a few weeks ago that the new unlock codes for the latest iphone 4 were not yet released by apple. Does anyone know when they are coming out?
Hi. ONLY the cellular provider can authorize unlocking. In Canada, only Rogers and Fido provide unlocking.
Stedman -
What are the line code methods used in ISDN ?
a link would be appreciated.
thanks!Ok got it. Check here under each switch type for the line coding:
http://www.cisco.com/en/US/tech/tk801/tk379/technologies_tech_note09186a0080093d6d.shtml#top2 -
my daughter is trying to download apps on her iphone and it keeps asking for answers to my security questions. the problem is, the questions its asking are not the questions i picked....i do not know the answers. how can i get around this?
I was told that if you reset the password then u can get in and reset the security questions, but I am having problems with it. Apple also has a page on it in there support area, u just have to type it into the search engine and it gives u a list a messages about security questions and support pages.
Maybe you are looking for
-
Need Help setting up wireless router
Hi, ive spent the week on the phone trying to reach all the various technical support people to help me, and getting no where, i wait forever and then get dropped. I just got time warner cable in NYC (queens) and the modem and internet surfing works
-
COPA Valuation when Billing posting, the exchange rage M
To anybody met this kid of situation, Controlling area currency: USD Company code currency: RMB When i am doing costing run the result of components could be saved by both of RMB and USD. But when billing is being posted, the amount of cost component
-
Hai We finish the BW-Implementation for our client . And we build some Bex-report. Now we need to measure the 'Query Performance' and 'Performance Of BW-System'. So how can measure the performance in terms of query and modeling, dataloading . pls let
-
Can iBooks export PDF files to other apps? For example I have a document in PDF format which need to add in digital signature but iBooks do not have "open in" feature to export the document to another app which I can make a signature with stylus.
-
Point to point wireless connectivity
Can I use Cisco AP 1240 for a point to point connectivity of 2 sites having a distance of approx 2 km