Center button lags, needs heavy push, AND 'Charging' when NOT CONNECTED!
Ok so I was gonna sell my Nano 1st gen 2gb white so I started washing it. I kinda forgot it was electronic so I just splashed water on it. It went on the screen, and onto the click wheel i'm pretty sure. Then I used soap and washed the click wheel, and it probably went through the cracks on the wheel.
Next, I turn it on, and I have to press down hard on the middle button, not lightly as before. Probably some connection thing. So I turn it off, about to open it. However, then the 'charging' comes on, and when it's on then the battery charging icon appeared, and it WASNT PLUGGED IN. I drained the battery for a few hours, plugged it in (the computer recognised it this time) and restored it from itunes. now the charge icon was gone and it turned off properly, however the click wheel was laggy and needed hard pressing. all the other buttons and the scroll wheel wo rk fine.
so i opened it up and i don't know what to do to the wheel to get the middle button to work properly. I have unscrewed it, but do I need to detach the click wheel from the ic?
Your help much appreciated. I think it is just a connection problem with the wheel but I do not know how to fix it. Might I just dry it for a few days? Happened yesterday.
P.S. two years old so don't worry about the warranty I have opened it up before cause I left it in the washer just to dry.
Wow, I have exactly the same issue, 'Charging' when NOT CONNECTED!Its really annoying, I use it for my Nike+, its going to disrupt my training, and I'm on holiday next week. So far it just stays on until it is completely discharged, so all I do is keep it on charge all the time.
It happened after a particularly sweaty training session, so I think it must be a similar moisture problem. I've put it in the airing cupboard to dry out now, and see if that fixes it.
Did yours dry out?
Medion Windows 2000
Similar Messages
-
How do you Sync Cals and Contacts when not connected to internet?
I Often take my macbook along with me to work. I cannot connect to the internet there. MacBook is set to use MobileMe. When I sync my iPhone 3G with my MB it wont sync updates I made on the laptop. When I go into the info tab in iTunes it states it will update by air. Is there a way to manually update these items when not connected to the internet?
I sync two iPhones and an iPad with one iTunes library on the same computer and each device has different content. Each device has its own sync preferences with iTunes. You can transfer the same music and apps to each device or different music and apps.
Are you sharing the same Apple ID or iTunes account? -
What's the voltage input needed to run and charge the iPad 4?
What's the voltage input needed to run and charge the iPad 4?
As long as the charger is rated for at least 10 watts or 2 amps it well charge the iPad just fine. A higher rated charger such as the 12 watt 2.4 amp charger will also charge the iPad, possibly a little faster, but it will not damage it. Chargers rated at 5 watts or 1 amp may charge an iPad very slowly if not at all.
Just be aware some cheaper dual port USB chargers share the 2 amps. It will charge an iPad in one port but adding another will reduce the current to both ports to 1 amp. An iPhone may charge fine but the power would be reduced to the lower level and slow an iPad charging on the other port. The one you link to will work fine although it looks as though one port is 5 watt/1 amp and the other is 10 watt/2 amp. There are many adapter's available that will supply 10 or 12 watts to both ports to future proof the charger giving you the capability to charge 2 iPads or other more demanding smart phones with larger batteries. I like Scosche reVolt chargers, they cost a little more but they are a quality product. If you want the best option go with a 12 watt charger which can speed up charging on many products a little more than a 10 watt can. -
I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.
Dude you have a jailbroken phone as stated in your first post, no need to do a second post.
As per the forum term of service you can't get help here. Use google.
that's the downfall of jailbreaking your phone. -
Re: plssss help i beg all of u after hard reset my iphone got stuck with an apple symbol i thought it will get on and now the battery got empty and pressing power on button it switch on showing red battery and gets off and also its not connecting to my la
its not connecting y?i think its software got corrupted,i think i should charge it first with a battery charger and when apple logo appears i should connect with pc,but i dont know how 2 open the back cover and how 2 remove the battery,i phone battery is removable or not?i mean it is fiz or wot?Recharge. Reset. Restore.
-
I have a Iphone 4 gsm (8f190) and it will not connect to itunes and when i put it in recovery itunes will not work. It won't show up when plugged into the computer. Only charges when plugged in the wall or a car charger. I've tried everything imaginable but I can't get the phone to register in iTunes at all.. The phone won't even reset.. when i try and reset EVERYTHING on the phone the apple logo with the progress bar starts to come up but the progress never moves.. PLEASE help me.. I'm at my wits end with this phone and I'm ready to just trash it.
martinfromdevon wrote:
Warning to iPhone users. Do not start the update of the iPhone software using iTunes.
Nonsense, and very misleading advice. I've updated iPhone 3G, 3Gs,and 4 through itunes many times, never had a problem once, not with one single update in nearly 5 years of iPhones. Of course, I've never jailbroken my phones either. Hack your phone and have update problems? I've got news for you, the problems are not a result of iTunes or Apple's updates. -
my iphone is able to charge when i connect it to my computor, but no matter what i do, will not show up on itunes. i have tried resetting both the computer and the iphone and nothing is working.
Type "ipad not recognized in itunes" or similar into the search bar at the top of this page by "Support".
-
My iPhone 5 keeps freezing when I connect to wifi, not just freeze the wifi, but freezes the whole phone and have to hold home and lock button. Locks up completely and instantly when I turn on wifi and connect. Solutions?
1. If you are really on iOS 7.1, you may wish to try upgrading to 8.1.2 which is the latest (basing this on your signature).
2. If updating the phone doesn't help, is this only when you connect to a specific wifi network? Or all wifi networks (including public with no password)? If it is ALL wifi networks, you may have a hardware problem. Genius bar would be the next step.
Make a Genius Bar Reservation (or cancel an existing reservation)
http://www.apple.com/retail/geniusbar/
Sign in using your Apple ID -
I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it? I run my Itnues from this external and now my library is gone. Luckily I have it saved somewhere else, which is not a problem, but I won't be able to write to this HD for right now. I can't see an option to give those permission back.
cptjuanjvarona wrote:
I have an external hardrive for MAC, I needed to save something from my work computer so I can pass it on to my MAC, it requiered me to re-format my external HD and now when I connected to my MAC I only have "read only rights". How do I fix it?...
Unless what you have to transfer is enormous, skip the external HD altogether and use a USB flash drive; you can get them with capacities to 128GB. Format the flash drive as FAT32 or ExFAT as LowLuster suggests so it can be read and written to on both PC's and your Mac. -
I installed windows 7 on my iMac 21.5 (late 2009) and when I boot windows 7, the lag drivers are missing and bootcamp is not installed. The windows package would not download through bootcamp, even when left alone for 2 hours. Don't have the lion disk... Drivers seem impossible to get. Please help!
lan drivers*
-
my ipod touch 5th generation is not turning on and i cant restart it because the home button does not work and it will not connect to anything
Get it fixed then, make an appointment with the Apple genius bar.
-
When creating a return by copying an order tax and charges are not defaulting?
Hi,
I have created a Return by copying sales order. But tax and charges are not defaulted from original sales order. Please note unit selling price is 0 for this item. I am using 11.5.10.2 version.
Sales Order: 143674
Item: UT1
Quantity: 2
unit selling price: $0
Tax: $0
Charges: $0
Calculated price flag: Freeze Price
But Return created as follows by using copy.
Return Order: 6678
Item: UT1
Quantity: -2
unit selling price: $0
Tax: -$5
Charges: -$20
Calculated price flag: Partial Price
Your help will be highly appreciated.Hi
At sales order form, you select Action > Copy
Change the order type to your "Return transaction type"
Go to Line Tab
Change the line type to Return type, enter return reason.
Save
This creates new RMA order.....this way this should copy the original tax amount.
For the Charges part, check in the modifier definition whether "Include on Returns" is checked in the Discount/Charges TAB.
Thanks
-Arif. -
What are the configuration need between R3 and XI when we use RFC sync adap
hi,
What are the configuration need between R3 and XI when we use RFC sync adapter.
Regards
siva.if its the sender adapter ref:
RFC adapter
Sender- /people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
Receiver;
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
Also;
trouble shooting rfc/soap -
/people/shabarish.vijayakumar/blog/2008/01/08/troubleshooting--rfc-and-soap-scenarios-updated-on-20042009 -
I need Encore CS6 and it is not available on Creative Cloud. Neither is Premier Pro CS6 which supposedly installs Encore CS6. I need to burn a DVD from my mpeg4 output from Premier Pro CC2014. What should I do?
You should probably post your question about burning a DVD from Premiere Pro in the Premiere Pro forum
Here is a link to info regrding getting CS6 applicarions thru the Cloud with a full subscription...
Get CS6 Apps from Cloud Subscription:
Download previous versions of Adobe Creative applications -
http://helpx.adobe.com/creative-cloud/kb/download-previous-versions-creative-applications. html -
hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?
hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?
Maybe you are looking for
-
Free Goods - (ISA 5.0)
I am using the ECC/R3 "edition" of E-Commerce (ISA 5.0)...NOT the CRM flavor. I am trying to see if anyone has successfully configured the 'free goods' functionality. Although, all of the documentation I have seen confirms that ISA 5.0 supports it an
-
Why field volume sales by KG is not capture figure any SKU such as FGDIHDV1950S3TH00, FGHQ1RG0400TNTH02 and FGHQ2RG0400TNTH02?
-
MacBookPro 2007 (3.1) having grey lines going across my screen. See below: http://i19.photobucket.com/albums/b188/ccbchunks/IMG_2729.jpg Anyone have any suggestions? B
-
I"m attempting to create a new WLAN on the 5508 controller that will allow access to the corporate network. I'm using WPA + WPA2 layer 2 security with authentication via PSK. When I input the required information and select apply I receive the messag
-
[Beginner-Q] Soalris 10 x86 Gcc faild to compile
Hello I want install a newer release from GCC-4.3.3 on me Solaris x86 machine, Configure finish witout question, make it appaer the following error and i dont know why, please for any help /usr/source/gcc4.3.3/objsrc/configure with-gnu-as with-as=/us