Center Buttons in a tool bar!!

Hello,
I am trying to center some buttons inside my toolbar. The only way i can think of doing this is by using the setMargin(Insets m) method of the JToolBar. However if I do this then I would have to calculate how many buttons I have, the application width, and so on!
Is there a more easy way how this can be done?

toolBar.add(Box.createHorizontalGlue());
toolBar.add(...);
toolBar.add(Box.createHorizontalGlue());

Similar Messages

How to add push button in application tool bar in SAP transaction VA01

How to add push button in application tool bar in SAP standard transaction VA01 and how to implement the code for that function code.

There is no scope to create a push button in application tool bar. Instead of that we can add in a menu bar.

How to create a new push button in application tool bar in GMGRANT thru BDT

Dear SAP Gurus -
We have a requirement in 'GMGRANT' transaction. We need to create a button in the application tool bar of 'GMGRANT' transaction. Once the button is activated, if the user clicks on the button then it will go to a new screen (external screen). User can input data in to the external sceeen and upon saving, the data will be stored in to a custom table and when user clicks on 'back ' button user should come back to the GMGRANT transaction.
Just wanted to know, how to create / activate a new button on application tool bar of GMGRANT transaction and what are the configuration and detail steps to achieve the same through BDT.
We went through a lot of documents on BDT but do not have a proper solution.
Could you please help.
Thanks in advance.
Regards,
Atul Mohanty

hi,
You can find user-exits (menu exits) to add new menu item.
But, there is no possibility to add new buttons on application tool bar.
Regards,
Sailaja.

How to hide button in application tool bar

Hi
There is a standard SAP report. after executing it,
There are 5 buttons in application tool bar .
I want to hide 3 of the buttons,
How can I hide them not by change program.
(Ex, can I use transaction variant).
Best Regards,

try to use transaction variant....
Edited by: shan palani on Dec 17, 2008 10:48 AM

Push buttons on application tool bar , should be changed based on radio but

Hi fndz,
i have 2 radio buttons on selection screen.
depend on the radio button i select , the push buttons on
application tool bar of basic list should be changed.
can u plz help me.
Thanks & Regards
kumar

Hii..
Parameters : r1 radiobutton group GRP1 ,
                    r2 radiobutton group GRP1 .
START-OF-SELECTION.
   CASE 'X'.
   WHEN R1.
     SET PF-STATUS 'S1'.
   WHEN R2.
     SET PF-STATUS 'S2'.
   ENDCASE.
Note: if you want to call the Same GUI Status (app toolbar), you can use the syntax
SET PF-STATUS 'S1' EXCLUDING <ITAB>
hope this solves ur issue.

Creating button in standard tool bar

Hi gurus,
I hve to create button in standard tool bar along with the existing icons and buttons, plz help
how to suppres the fields other than screen table methods?
reward asure
with regards,
thambe

hi,
if u using ALV then go to SE41.
Give SAPLKKBL as program name and STANDARD_FULLSCREEN as status....
now click on Copy Status and in that give ur program and status name into To.....
now in REUSE_ALV_GRID_DISPLAY
FORM display_list.
g_f_repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = g_f_repid
      i_callback_user_command = 'USER_COMMAND'
      i_callback_pf_status_set = 'SET_STAT'
      it_fieldcat              = g_t_fieldcat[]
      it_events                = g_t_events[]
    TABLES
      t_outtab                 = g_t_itab
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " display_list
FORM set_stat USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTAT' EXCLUDING rt_extab.
ENDFORM.                    "set_stat
here my status name is ZSTAT which i gave in SE41...
and in user_command form...
FORM user_command USING u_comm LIKE sy-ucomm selfield TYPE slis_selfield.
CASE u_comm.
    WHEN 'DET'.
    ........ur logic.........
ENDCASE.
ENDFORM.                    "user_command
reward if usefull...

How do I install a foxit button on my tool bar? I recently upgraded to the latest version, but my tool bar does not contain a firefox button which is need for certain tasks, such as private browsing.

I had an existing laters 3 point whatever version of Firefox and recently upgraded to Firefox 10. This new version still has the old toolbar across the top, but there is no "Firefox button" which one has to use to activate certain action such as "private browsing." Is there anyway I can install the button on the toolbar, or is there a way to change to the new version 10 interface which includes the Firefox Button. I would prefer the former (the old configuration with the tool bar on top, but if that cannot be done, how to I migrate to the new configuration which apparently puts the tools on the side, if I'm not mistaken.
Thanks for any help you can provide. I have Windows XP.

If you have the old fashioned toolbar, you can still go into Private browsing by clicking Tools, then "Start Private Browsing". All the options that are in the Firefox button are in the old style toolbar, just maybe a little more hidden.
To enable te Firefox button, go into View, then Toolbars, then uncheck "Menu Bar". You should have the Firefox button.

How do I add a print button to the tool bar?

When I open the menu there is not a "print" button to add to the tool bar. Even under customize there is not a "print" button. How do I print from mozilla?

The Print button in the "3-bar" Firefox menu button drop-down list opens the Print Preview window.
You can click the Print button in the Print Preview window or use the Print item in the File menu (File > Print) or use the Ctrl+P shortcut to have access to the print selection item and other print setup options.
You can look at this extension:
*Universal Print: https://addons.mozilla.org/firefox/addon/universal-print/
There are other things that need attention.
Your System Details list shows that you have a user.js file in the profile folder to initialize prefs each time Firefox starts.
The user.js file is only present if you or other software has created this file and normally it wouldn't be there.
You can check its content with a plain text editor (right-click: "Open with"; do not double-click).
The user.js file is read each time Firefox is started and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
You can delete the user.js file if you didn't create this file yourself.
*http://kb.mozillazine.org/Preferences_not_saved

How to print/save CL_GUI_ALV_GRID data using button in custom tool bar?

Hi,
I have a screen 9002 where I have used a CUSTOM CONTAINER and the screen 9002 is called from 9001.
I am showing an ALV GRID in the CUSTOM CONTAINER by using CL_GUI_ALV_GRID.
Screen 9002 also has 2 buttons (PF-STATUS): PRINT and SAVE in application tool bar. Now, I need to print the data of ALV and save the data in excel by pressing these 2 buttons respectively. Please let me know the way-out. If these functionalities can achieved by standard tool of the screen 9002, it will be also OK.
Thanks
Arghya

Hi,
Why don't you use the function "excel inplace" in the ALV? With the ALV you have some buttons "SORT/TOTAL/FILTER... and you have PRINT and EXCEL INPLACE"?
Do you use the method call method g_grid->set_table_for_first_display in order to display your data alv?
Best regards

How to add button on application tool bar of standard transaction

Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijay

HI
SHD0 is used to create and maintain Screen and Transaction Variants..
to know more about Screen and trransaction variants click on this link
http://help.sap.com/saphelp_47x200/helpdata/en/67/232037ebf1cc09e10000009b38f889/content.htm
we can create Transaction Variants Using SHD0 Transaction.
Transaction Variants and Screen Variants
Transaction variants can simplify transaction runs as they allow you to:
Preassign values to fields
Hide and change the 'ready for input' status of fields
Hide and change table control column attributes
Hide menu functions
Hide entire screens
In particular, hiding fields in connection with screen compression, and hiding screens, can result in greater clarity and simplicity.
Transaction variants are made up of a sequence of screen variants. The field values and field attributes for the individual screens found in transaction variants are stored in screen variants. Each of these variants is assigned to a specific transaction, can, however, also contain values for screens in other transactions if this is required by transaction flow. The transaction that the variant is assigned to serves as initial transaction when the variant is called.
There are both client-specific and cross-client transaction variants. All screen variants are cross-client, but may be assigned to a client-specific transaction variant.
A namespace exists for cross-client transaction variants and screen variants and both are automatically attached to the Transport Organizer. Client-specific transaction variants must be transported manually.
In principle, transaction and screen variants can be created for all dialog and reporting transactions. There are, however, certain Restrictions that apply to certain transactions, depending on their internal structure.
No transaction variants are possible with transactions already containing preset parameters (parameter transactions and variant transactions).

How to add button on application tool bar of standard transaction-URGENT

Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijay

Hi,
Go through this thread.
Push Buttons on application toolbar.
Regards,
Vani.

How to add button on application tool bar of standardt ransaction

Hi All,
Can any one let me know how to ADD the button in on application tool bar of standard transaction by using SHD0 transaction or any other solution.While adding the button I don't want do any code modification.
Thanks,
Vijay

http://help.sap.com/saphelp_nw04/helpdata/en/c8/19762743b111d1896f0000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/83/7a18cbde6e11d195460000e82de14a/frameset.htm
these are the avilable user Exits for the Tcode..C203
XCZD0004 Extend authority check for the material-recipe allocati
CMDI001 Determine explosion control for BOM
CPAU0001 Enhancement for Authorization Check in Task Lists
CPDO0001 Test units of measure for reference operation set
CPRE0001 Enhancement for Reorgnization Checks in Task Lists
Run this Program.. enter the Tcode. u'ii get teh BADI's exist for the Tcode
REPORT Z_FIND_BADI .
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE18' AND SKIP FIRST SCREEN.
endcase.
Please give me reward points...

Icon with push button on application tool bar

hi
how we place icon along with pushbutton on application tool bar on selecteion screen.
thanks in adv

Hi,
you can check the code below for test,
TYPE-POOLS icon.
TABLES sscrfields.
DATA functxt TYPE smp_dyntxt.
Parameters: test(1) TYPE C.
SELECTION-SCREEN: FUNCTION KEY 1.
INITIALIZATION.
functxt-icon_id   = ICON_GRAPHICS.
functxt-quickinfo = 'graphics'.
functxt-icon_text = 'Graphics'.
sscrfields-functxt_01 = functxt.
AT SELECTION-SCREEN.
CASE sscrfields-ucomm.
    WHEN 'FC01'.
Message 'Button 1 pressed' TYPE 'I'.
    WHEN OTHERS.
ENDCASE.
START-OF-SELECTION.

How to add custom buttons in the tool bar of the crystal reports viewer

Hi,
I'm using Crystal report viewer (Crystal 2008) in my report and I want to add custom buttons and handle them in the tool bar of the viewer. Is there anyway to achieve this?
Please help me in this regard.
Thanks in advance.
Siva.

I did this by adding a picturebox to the toolbar, the same size as the buttons, and loading in an image, and putting code into the Click event of the picturebox.
I also put code into the MouseHover event to change the picture's background color and into the MouseLeave event to change it back.
I have a couple of these buttons. They work very nicely and really look like part of the toolbar.

Safari Refresh Button vanished from Tool Bar!

Uploaded Safari 4 and now find the Refresh Button has disappeared from the Tool Bar! I used it all the time when updating Web Sites and testing them live. Tried the Reload Page pull-down but it is not the same. The old page is still there. It's a pain to Reset Safari each time. Had to go over to FireFox! Any ideas? Or how do I get back to Safari 3!

Wesley wrote:
The refresh button is to the right within the address bar; or as mentioned Cmd-R works as always.
This is undeniably the case but I want it back where it was, close to the other controls. I also want the blue progress bar back. At least that gave some idea of how the page load was proceeding.

Center Buttons in a tool bar!!

Similar Messages

Maybe you are looking for