Center Chanel Not Working: SB ZS 2 Gamer & Klipsch ProMedia

Not sure which section is appropriate for this answer but it could fall under speakers or the soundcard
I've read a few things on here about getting my center channel to work, but no luck. I have Audigy ZS gamer and for speakers I have Klipsch ProMedia 5.
I've switched the sound panel in my control panel to 5., I've looked into the audio console as well in the EAX section s well as the CMSS 3D and still no luck. I've unplugged and replugged the wires as well. I know for a fact that it was working before I reinstalled Windows a few months back. I've done all the necessary driver updates as well. Any other changes or possible "buttons" somewhere?
Thanks in advance for any help

Does it work on the speaker test in the Creative software? If it does then try turning on CMSS.Message Edited by nvidiot on 08-27-2006 09:39 PM

Similar Messages

  • HP Officejet Pro L7590 Printer - HP Solution Center does not work

    I am not able to get the Solution Center suite to work because the installation has an error.  I am using Windows 7 Home Premium.  The printer I am installing is the HP Officejet Pro L7590.
    If I go to Devices and Printers and add the printer.  The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine. 
    However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work. 
    The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
    Because of the failed installation using HP software the HP solution center does not work.
    In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found.  In addition, I could not remove the printer.  Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer.  This leads me to believe HP has a faulty software bug that is causing the error.
    I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in.  If I remove the usb and reinsert it, the Windows would just show the failed driver.  I repeat, it failed after I install the software, it works fine without.  The primary reason I want the software is to use the scanning feature.

    Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are having software installation issues.  i would like to try and assist you.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Notification center does not work at all with mail

    notification center does not work at all with mail there is no sonud no banner . i try to chek and unchek thas box may it is something may effect but still not working where is the notifiication center they said to us about it but i want be fair it's working for imessege and it's not working also for app store update like they said there is abig kiind of joke. i use macbook air mid 2011.

    Have you changed the system voice to an English one in system preferences?

  • Game center account not working on multiple devices.

    My game center account works fine on my iPad 2, but when I log in on my 3GS (after logging out on my iPad 2) my iPhone can't receive invites and invites that I send do not work when the other player accepts them, it just says "waiting" . All of my push notifications are turned on and I can play with random people online, but I can't play with friends or even receive invites from them. But if I log out of my iPhone and log in on my iPad the account works just fine.

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • After clicking game center does not work game in IPhone

    Hello everyone
    I work Flush Bolder 4.6
    Using AIR SDK 3.9
    I create a lot of games and has never met with such a problem.
    When I run the game at IPad my game works without problems. After hiding Game Center game works fine.
    In IPhone after clicking Game Center game does not work. All the buttons do not work.
    What could be the reason?
    Thank you

    I have the same problem...
    Tried using Chess, editing the hosts file, using the iOS simulator from Xcode, I added 208.67.222.222 e 208.67.220.220 to the DNS Servers, and I currently have a clean Mountain Lion instalation...but GameCenter still doesn't work.
    I get a small green window that covers the login fields, and the window has nothing on it, just a button to "Cancel". I put my password and click on Login, but nothing happens...

  • Mouse & trackpad is not working properly in flash games

    I thought the problem was with my mouse. But even my trackpad behaves weird.
    When I try to click this game (http://jayisgames.com/games/red-remover-player-pack-2/) or any other games before, single clicking any clickable spots in the flash game works. But in that game, I could single click on "Play Game," "Ok." "the red face," "Play" & box 1. But from that on, I must double click to make anything work. It's not that game that requires double clicks. I've been playing it for a long time, all only single clicks. From there on, I single click on a red box, nothing happens. Then I click on another spot, that previous click happens.
    Not just on that flash game, I've tried many others ones, all gave me this click delaying problem.
    When I try to click on spot A, nothing happen. Then I click on spot B, the click on spot A happens. So I must double click on everything to work.
    I realize I couldn't single click on anything to work on any flash websites (sample:http://www.mono-1.com/monoface/main.html). Clicking once just highlights the link, must click again to make it work.
    Please try out that game to see what I'm talking about. I'm not promoting anything here. I got a serious mouse problem.
    Thanks.
    macbook pro, Mac OS X (10.6.4)
    Model Identifier:
    MacBookPro7,1
      Processor Name:
    Intel Core 2 Duo
      Processor Speed:
    2.4 GHz

    Same problem on Windows 7 in Chrome browser...
    My Windows 7 one at work works fine though.....

  • Media Center Pc not working

    Hi ,
    My media center pc hp model "m7552.de" not working not boot screen but only case, cpu, graphics card and fans working not doing beep signal ;
    + i'm tested another power supply on orginal (hp) mainboard (not working).
    + i'm tested another ram on orginal (hp) mainboard (not working).
    + i'm tested another pci express graphic cart not runing on orginal (hp) mainboard (not working).
    + I'm tested amd 4200 cpu on another board runing without problems .
    - i cannot tested another on board ram's and tv cart .
    i thing problem on mainboard ?
    Which model mainboard should I buy to work with this model ?
    i have Windows Xp Media Center Edition 2005 HP license key (On PC) ,  
    After changing the motherboard I do not want to get a new operation system license, for that is the suggestion?
    www.limonforum.com

    Where support ?
    www.limonforum.com

  • Center alignment not working for all groups

    We are trying to center our visual within our blank white canvas, and we have multiple groups within the file. See image attached. When we select all groups then hit the center alignment button, only the bottom group becomes centered and nothing else. When we try to select all layers within the first group and hit it, everything moves except the color mask which stays in the original place.
    This seems to be a glitch or bug that it's not working automatically for everything.
    ~Katie

    Ask in the PS forum and provide exact system and version info.
    Mylenium

  • Cost center substitution not working

    Hello,
    I have made a CO cost center substitution in OKC9, callup point 1, prerequisites: sales office=1010, sales group=n01, substitution COBL-KOSTL with "na001".
    The sustitution is active , I have run program RGUGBR00 but still not working. When I try to make a delivery I get the message that the account needs CO allocation.
    I have also try using FI substitution for BSEG-KOSTL, but I can't get the same prerequisites (sales office and sales group).
    Please, suggest a soution.
    Lavinia

    Hi
    ABAP code needs to be written in the exit... With in the code you need to read the fields coming in from SD... Ask your abaper if it is possible to use some field symbols and read the data from memory directly
    I dont know the technicalities much, but it should be possible to read the fields
    br, Ajay M

  • Control center will not work in apps since 8.2 .Works on the lock screen and on my iPad.

    As I have already said above, the control center will not deploy in apps on my iPhone 6 since 8.2 It is turned on ,works on the lock screen and on my iPad. Any suggestions?

    Check the Settings app to make sure the correct Setting is there to allow showing the Control Center in apps.
    Settings > Control Center > Access Within Apps > ON

  • Center alignment not working fora ll groups

    We are trying to center our visual within our blank white canvas, and we have multiple groups within the file. See image attached. When we select all groups then hit the center alignment button, only the bottom group becomes centered and nothing else. When we try to select all layers within the first group and hit it, everything moves except the color mask which stays in the original place.
    This seems to be a glitch or bug that it's not working automatically for everything. We are using Adobe Photoshop CC, 2014.1.0 release

    Ask in the PS forum and provide exact system and version info.
    Mylenium

  • 2nd Gen iPod center button not working

    I have tried just about everything to get the center button to work. It has stopped on me once before, but it was a long time ago and I can't remember what I did to fix it.
    Every other button works just not the center button. I have tried restoring it, resetting it, and toggling the hold button. But to no avail it will not work.
    If anyone can help it would be greatly appreciated.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                 
    - Restore to factory settings/new iOS device.
    CAUTION
    Before you restore/update the iPod make sure that your iTunes library has the version of apps that are presently installed on your iPod. Many apps have been update and the update apps are not compatible with the 2G iPod. I would do that by deleting the apps from your iTunes library and then transfer them to your iTunes library. See:
    iTunes Store: Transferring purchases from your iOS device or iPod to a computer
    In iTunes 11 use Control+B to show the Menu bar then go to iTunes>File>Devices>Transfer Purchases
    To more easily find compatible apps:
    iOSSearch - search the iTunes store for compatible apps.
    Vintapps 3.1.3 - paid app.
    Apple Club - filter apps by iOS version.

  • Audigy 2 Value center speaker not working?

    So I have vista ultimate x64 and logitech g51 5.1 speakers. The center channel does not work at all. It's pretty much a brand new set and swapping out the speaker does not help, so I think it is a sound card/ driver problem. The problem is in the sound test area, and is not just because I am playing 2.1 sound without CMSS. Does anyone know what is up?

    it sounds to me like you have your matrix button pushed in. This button will try to make sound come out of all speakers. If it is depressed and you are testing a five to 1 sound, it will not play through the center channel. I have an old set of logitech speakers and with the matrix button pressed in, I get no center channel because it is trying to upsample stereo to all five speakers. Try that please.
    Thanks
    jmacguire
    Cheers,
    jmacguire

  • I can buy my needs from the game says I tell customers to help please help me Visa card not working in any Itemes games

    I can buy my needs from the game says I tell customers to help please help me Visa card not working in any Itemes
    games

    If you mean that you have been instructed to contact iTunes support, then will need to do what it says, contact iTunes Support. These are user-to-user support forums, if you thought you were contacting Apple by posting here. Go here:
    http://www.apple.com/emea/support/itunes/contact.html
    to contact the iTunes Store.
    If that does not answer your question, try posting in your native language, or find a friend with a better command of English to help you ask your question here.
    Regards.

  • Search help for cost center does not work after SP upgrade

    Hi,
    Create a shopping cart in SRM and go to the cost assignment tab. When click on the search help to enter a costcenter, we don't get any search help screen.
    Thanks

    Kindly check note: 1259735 Search help of generic account does not work
    Additionally Check the 5th question/answer of note 815849.

Maybe you are looking for

  • Pre Form

    We are in the process of optimising the existing modules on web in our applications We have following code in the PLL library which is called in WHEN-NEW-FORM-INSTANCE. Wethe it will be of any performance gain to shift this code directly into form or

  • How to save my photos in a different format?

    my photos seem to automatically be saved as Qmob. How can I change it to jpeg when burning to a disc?

  • Adobe Flash Player freezes at 25% on Mac OS X Yosemite????

    I have been trying to update my Adobe Flash Player because it will not let me watch any videos online. Ever since I updated my OS X Yosemite, my computer says my flash player is outdated. I tried to delete the download after about 30 minutes because

  • Why can't I email iphone 5 videos from my mac?  They show up black

    After I import videos from my iphone 5 (OS 7.1.2 - but I've had this problem through multiple operating systems), I sometimes want to email them from my MacBook Pro (OS X Lion 10.7.5).  No matter what email program I use, (gmail/mac mail), the attach

  • Unable to deploy BPEL from jdeveloper 11g

    Hi I tried to deploy a simple bpel project from jdeveloper 11g to SOA 11g but i get the following error in the jdeveloper.. Buildfile: D:\software\JDeveloper 111100\jdeveloper\bin\ant-sca-compile.xml scac: [scac] Validating composite : 'D:\software\J