Center channel won't work now

I just did a fresh windows install, reinstalled the creative drivers and
software. I have it set to 5. like before but now it's sending my center
channel sound through my Sub. My sound card is a creative xfi xtremegamer
fatality pro with z5500 as my speakers. I messed with all the options I can and
the sound is all messed up.

gumby50 wrote:
Ya this all started happening after a clean boot/reinstall. I ran the onboard and a ps3 optical on my z5500 and I'm having the same issue of the sound going to the Sub instead of the center and rear.
If it's also happening with your onboard sound, you might want to isolate the problem and see if this is an issue with the z5500 speakers. Disconnect the speakers system, connect a pair of headphones to the Line Out 3 and perform a speaker test. Monitor if the X-Fi XtremeGamer is sending the correct output to the center and subwoofer channels.
Note: Lower the volume before you try this.

Similar Messages

I need a help !!! Please ,I dropped my iPhone 5 in toilet and I didn't get fast maybe 5mins before I get it because I didn't notice drop it and it won't work now it's almost 1week I'm waiting it still it don't work ...

I need a help !!! Please ,I dropped my iPhone 5 in toilet and I didn't get fast maybe 5mins before I get it because I didn't notice drop it and it won't work now it's almost 1week I'm waiting it still it don't work ... But when I plug my charger it goes light and show up apple logo and die again I don't know what to do and it's so expensive here at Japan pls.. Help maybe there still way to get it work again
Thank you ,Rean

At this point it's clear that it's been damaged and will need to be take or sent to Apple for replacement.
Regards.

Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??

Updated iTunes to 10.5, iTunes won't work now! Everytime I open iTunes it just freezes and I can't click on anything. It says to take it out of compatibility mode and still doesn't work! any help??
Thank you. Nick

Okay, we'll try the technique from the following post. Be sure to be logged in to your usual user account when doing so. (Otherwise you'll be editing the wrong set of HKEY_CURRENT_USER keys.)
Re: How do I turn off the compatibility mode for ITunes.
Does that clear up the compatibility message?

I seem to have lost most of my 9000 photos when I upgraded to Yosemite 10.10.3. iPhoto won't work now and says it needs an upgrade not available in the UK. Only a few of the 9000 photos appear on Photos! HELP?

I seem to have lost most of my 9000 photos when I upgraded to Yosemite 10.10.3. iPhoto won't work now and says it needs an upgrade not available in the UK. Only a few of the 9000 photos appear on Photos! HELP?

Move the incompatible iPhoto version to the Trash, before you try to reinstall from the AppStore, but don't empty the Trash.
update as described here:
Get iPhoto 9.6.1 if you didn't update before OS... | Apple Support Communities
The main idea is to move the iPhoto app to the Trash, so Spotlight does not see it as installed, reload the AppStore Purchases tab with ⌘R, and then to try to download again from the App Store - from your Purchases tab, not from the main page, since you can neither buy iPhoto nor update it, but you can reinstall, if your AppleID is associated with it.

Center channel doesn't work

Hi
I just purchased a CL SBS 580 5.1 speaker system and a SB Audigy SE sound card. The installation of the sound card was uneventful, and sounds do work. Mostly, anyway. I installed it with the 5.1 speaker settings. Then I proceeded to disable my integrated nVidia sound chip on the motherboard that was previously working as my sound device. First thing I noticed was that WinAmp only seems to use the front channels and the subwoofer. I don't know whether this is a bug or a feature. After noticing this I ran a diagnostic on the setup. In the channel test, all other channels sounded fine except the center channel, which was mute. I switched around the right rear and center channels, and discovered that the speaker itself works fine (in the diagnostic, anyway). But the center channel doesn't. No white noise with the 'noise' test, and no female voice with the 'channel' test.
Yes it's plugged in properly into the center channel on the sub, yes it's turned on and yes the volume is at an audible level, both on the speakers themselves and in the sound card volume control.
Here is the diagnostics log:
Creative Diagnostics 4.0 Test Log
Detected device:
Sound Blaster Audigy
Tested device:Sound Blaster Audigy
02/01/2006 06:31:04 PM Drivers Tests Pass
02/01/2006 06:31:07 PM Windows Multimedia Tests Pass
02/01/2006 06:31:08 PM DirectSound Tests Pass
Other info:
AMD XP 2000+
1024 MB DDR 266 MHz RAM
Asus A7N-266 Motherboard
Windows XP Pro SP3
ATI Radeon 9200 SE 128MB video card

Ok, so now I tried to play a DVD movie with my DVD-drive. Before I got this new Audigy sound card and SBS 580 speakers, movies would run almost fine, as in the video and sound would be smooth unless there was a great deal of action occurring, in which case it would be slightly choppy. But now, the video seems to change pace, occasionally stopping entirely for a few seconds, then running again, but slowly, then running normal, then becoming choppy, stopping again, and so on. Also, the sound does the same, sounding almost normal one second and choppy the next. But the biggest deal is the fact that I don't hear any speech! I read somewhere that the center channel handles speech in video playback, and without it I can't hear any talking.
Is the subwoofers center channel broken and should I go get another set with the warranty, or whats the problem?

Audigy 2 + Logitech Z680 speakers, only center channel and sub work

I have an audigy 2 and logitech z680 speakers, and only the center channel and sub are working. I have tried reinstalling drivers, unplugging and replugging everything, i even moved the soundcard to a different pci port. Whenever i try to install any creative things, it tells me that it cannot find any required components. (anything creative). If anyone has had a similar problem or can help, i could use any help i can get. Thanks!
Also, i recently moved the whole system from school to home, and since then it hasn't been working correctly.
Thanks

Ok, so now I tried to play a DVD movie with my DVD-drive. Before I got this new Audigy sound card and SBS 580 speakers, movies would run almost fine, as in the video and sound would be smooth unless there was a great deal of action occurring, in which case it would be slightly choppy. But now, the video seems to change pace, occasionally stopping entirely for a few seconds, then running again, but slowly, then running normal, then becoming choppy, stopping again, and so on. Also, the sound does the same, sounding almost normal one second and choppy the next. But the biggest deal is the fact that I don't hear any speech! I read somewhere that the center channel handles speech in video playback, and without it I can't hear any talking.
Is the subwoofers center channel broken and should I go get another set with the warranty, or whats the problem?

Video aplication won't open and I try turning of my ipad and it won't work now matter wath!!

Why?

I assume it's the Video app that now won't work at all - if it's the iPad then try the second option below.
Have you tried closing the Videos app completely ? From the home screen (i.e. not with the Videos app 'open' on-screen)double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Videos app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

I purchased a new keyboard and the volume keys won't work now. How can I fix this?

I recently purchased a keyboard, with the numbers to the side, and now the volume keys won't work on the keyboard. Do I need to reset something?
Thanks in advance!

If the keyboard you purchased is an Apple model MB110LL/B -
Apple Keyboard with Numeric Keypad - English (USA) - Apple Store (U.S.)
...then -

I have applications which won't work now lion 10.7 is installed do I have to re-install them all?

I have just installed li0n 10.7 on my computer and some other applications now won't work. Do I need to re-install these ?

Depends on what they are.
If they are old, PowerPC based programs, they won't work under Lion. If they are Universal applications, then reinstalling might work. However, you should check with the developer to see if there are any updates.

Solutions Center patch won't work. Windows 7 from Vista. C6280.Red

I have a Dell Inspiron (Windows 7) and a C6280 on red with my husband's Hp Pavillion lap (Vista). When I click Solutions Center to scan, a pop-up tells me I cannot do that just because. I have a CD for Vista since the lap is older than the Dell, when I try it Windows tells me to forget it. Then a window tells me Solutions Center won't work because I never finished installing something or "other". If they mean PS_AIO_02_NetWired-FullWin_WW-130-140 I installed it 4 times. "Others" were many. When I try the patch (dot4patch_reboot.exe) it immediately reboots and... nothing else. For rebooting my computer I don't need a patch, I'm obstruse but not that much. This is the 4th day I'm working at this and I'm desperate. I'm thinking of throwing the whole rubble out of the window. In case I change that for myself: would a kind soul help me with this mess, please, please, pretty please? You might have noticed I'm not very good at this kind of problem. Therefore I have something extra to ask: make it simple? Like Forums for Dummies? Thank you so very much. Whether you can help me or not you had the patience to read all this. Bless you.

RitadeCasia,
I am sorry it is not working.
This part of your statement concerns me:
"Only new happening today was an HP window offering downloads, erasings and so forth with the image of a lovely Oriental girl."
This Update message is not from HP. HP does not offer any updates while showing the image of any lovely person.
You might consider the following:
The system may be infected with a Virus (corruption causing software) or Malware (essentially an unwanted or malicious program)
Use your best Anti-Virus software and run the best, deepest scan that is offered. When the first scan is complete, run your Anti-Virus again.
Anti-Virus Software packages
If you do not have Anti-Virus software, or if you need recommendations:
Avast Anti-Virus   NOTE: You may select the free version. Avast "plays well with others: it gets along with Windows Defender (the Microsoft Anti-Virus that comes standard on your computer.
Recommendations provided by Microsoft for Anti-Virus software that works well with Windows 7 and most probably with Vista as well:
Windows 7 consumer security software providers
Malwarebytes software can help pull out, that is, it can extract and destroy those programs that do not belong on your computer. Download and install the Free Version. You might run it at least one time, perhaps twice.
Malwarebytes Anti-Malware Free
After each time the computer is scanned, reboot / restart your computer and log in.
======================================================================================
File System Scan -- sfc
Assuming the computer is considered "cleaned" of unwanted virus and malware software, you might next complete a system Scan to help make sure the File System is healthy:
Using System File Checker (SFC) to Restore System Files
System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista or on Wi...
The sfc scan can be run more than one time to make sure it catches everything it can find.
After the sfc scan completes, try your installations again.
======================================================================================
New Backups -- System Recovery
After the scans are completed and you are fairly confident that the system is clean, you will want to create a new backup of your personal data.   This is a backup of your Account, files, and any "extra" folders that you have created that is not part of the Vista Operating System.
You do not want to over write any previous backups this time. Example: If you have a backup of your data on a USB stick that you made last month, two months ago -- or any time before the problems began, then you should KEEP that older backup and make a new backup on a different USB drive.
In other words: You need to make new backups -- but you may not yet be able to trust them 100%; keep the older backups along with the new ones. IF you end up having to run a full Recovery on the computer, you will then have a choice about which personal backups to load after the recovery is complete.
Recovery
If you cannot fix the persistant problems on your computer, you may have to run a full Recovery to reinstall your Vista Operating System. Please READ all the following documents before you run a Recovery.
You may NOT need to run the Recovery if you can fix the problems and your computer is again "acting normally". I am providing the Recovery information in case you need it.
Reminder: A full Recovery is destructive -- the Recovery procedure removes your data, removes the Operating System, and then reinstalls Vista. You must then complete additonal Recovery steps to load your personal data into place on the computer. **
** The exception: IF you have created (previously) a full IMAGE backup, you can use it to restore your computer to that exact condition. A full Image contains not only the Vista OS, it also contains all your personal data, your programs, and everything else that was on the main disk when the Image was created.
If you do not already have an Image, you will be using other means to Recover the system back to working order.
Documents to Help with Backups and Recovery
The first document shows you how to use the computer's programs to make personal backups.   This is not the Recovery procedure -- it is something you do BEFORE you run the Recovery. This procedure is related to Recovery in that it is preparation work you do ahead of time to protect your data.
Reminder: Do not overwrite your previous backups -- IF your system is infected AND the Anti-Virus programs cannot completely fix the problem, then you still need to make backups, but you also need to understand that they may not be 100% safe or complete. You can use the new backups, just know that IF they are later found to be infected, you will be depending on your older backups to restore your personal data -- you need to keep both old and new personal backups on hand and ready to use.
Use Windows Basic Backup and Restore Center to Back Up Files in Vista
The above doc calls:
How to Back Up Your Files (Windows Vista or XP)
This document shows you how to run the Recovery procedure -- this is the "destructive part" that removes and then reinstalls Vista.
Recover Windows Vista Operating System Using HP Recovery – Notebooks
This document explains what steps are necessary to completely restore your computer after you complete the initial Recovery of the Vista Operating System: installing personal programs (Firefox) and personal files (your personal documents and pictures).
NOTE that you will need on hand: Downloads or CDs of your programs that are not part of Vista. For example, if you have installed a Photo Editing software, you will need to reload it after the Recovery.
HP Notebook PCs - Setting up Your PC After a Recovery (Windows Vista)
=====================================================================================
And, Good Luck!
Kind Regards,
Dragon-Fur

Right headphone channel won't work.

For somereason, the right channel in my headphones won't work in my iPod. It works in all my other deveices like my CD player and computer, but not my iPod. Does anyone know what's wrong?
Windows Vista

If you are saying the headphones work fine then its most likely to be your ipod's headphone connection but try different headphones first,the ipod's internal connection is replaceable but i don't recommend you trying it, if it is within warranty, send it back to apple,
Good luck and welcome
Joe

External hard drive USB 2.0 OS 10.9.3 won't work now

external hard drive USB 2.0 OS 10.9.3 won't work now

Disconnect the external drive and reset the SMC, as per > Resetting the System Management Controller
1. Shut down the computer.
2. Unplug the computer's power cord.
3. Wait fifteen seconds. one minute.
4. Attach the computer's power cord.
5. Wait five seconds, then press the power button to turn on the computer.
and reconnect the external drive.
Then if the external drive fails to work...?
1. Try a different cord.
2. Try a different external drive.

I have an OLD PowerBook G3 and it won't work now.

I have aquired an old PowerBook G3 400 Mhz with FireWire and it has been sitting collection dust for quite a while. It will not turn on at all. I have the batter in the left bay and the right bay has nothing, not weight saver or anything in it, and it is plugged in over ac. I have tried 2 power adapters, an apple one and a 3rd party one. The computer does not do anything, no lights or noises. The lights on the battery don't light up either. Does anyone know what could be the problem?
Thanks

Start with this article:
50959- Troubleshooting portables that won't turn on or start up
If none of those helps, remove the main battery and try the list again. Operating without a battery may be helpful for bench testing, but your powerbook is intended to run with a battery in place. Without a battery, it may be more likely to sustain damage due to power fluctuations. If the main battery does not recharge itself, it may be dead and require replacement.
The PowerBook also has a recharging PRAM backup battery (unlike the iBook which has only the main battery). You may have to leave it plugged in overnight (without the main battery in place) or longer before it has any hope of recharging the PRAM backup battery. If the PRAM backup battery does not recharge, it may be dead. It is more convenient to have a working PRAM battery for daily use.

I reactivated my phone and it won't work now

hi all
when i just got my phone, my friend actiavted it for me and it was always on his name, although i went to change the name and it reactivated itself it will now not work for me its saying that the activation server is temp unavailable, (this is doing that hours now) p.s i dont have itunes so im relying on wifi for this problem
can anyone help

When your friend set it up he hacked the phone. While it isn't illegal, it violates the contract with Apple and they will no longer honor the warranty or provide support for the phone. See: Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issu…

Discover Card uses Adobe to run certain features. They Won't Work Now

I have used these features in the past, but now they will not work. It prompts to download the latest Adobe version, which I have done repeatedly to no avail. I have contacted Discover several times in the last few months, but the features still do not work. Please help.

How long do you have to wait hoping someone will read and answer? There is no contact for an Adobe Service Rep. This isn't very efficient.

Center channel won't work now

Similar Messages

Maybe you are looking for