Center play line on screen

Hey,
I would like to play audio files in A.A. multitrack , but i would like that the white line (the play head??) stays in the middle of the screen instead of rolling till the end of the screen and than flip to the next screen.
This way I always see what is coming ..
Anybody can help me with this one ??
thanks

Hoi,
thanks.. it works , but most of the time it fails.. i donn't know why, it mostly fails when the playback line is on the screen..
than it just scrolls by till the and of the screen and stops
it seems that i cannot make stable, very important for me since i have to work with it in theater.
thanks
Vincent
Date: Mon, 5 Apr 2010 08:39:06 -0600
From: [email protected]
To: [email protected]
Subject: center play line on screen
To get this to happen, you need to do two things; In Edit>Preferences>Multitrack, select the 'Smooth Auto-scrolling during Playback' option, and optionally you can go to the General section and cause this to happen immediately at the start of playback, if you want.
>

Similar Messages

Logic 8 Glitch: Blacked out screen to the left of the play line

Using: Logic Pro 8.0.2 / Macbook Pro 2.8GHz i7 / 8GB ram / OSX 10.9.4
When I play anything on Logic, everything that has been played (everything to the left of the vertical play line) is blacked out (see figure 1). When I move the screen back and forth horizontally, it returns to normal. Sometimes the glitches are even more extreme (see figures 2+3). I went to reinstall logic off of the disk, but the DMG no longer works on this version of OSX. Is there some alternate way to reinstall this version of logic, or is there any discount for upgrading to a newer version?
Figure 1:
Figure 2:
Figure 3:

Hi
This is a known issue with LP8 and OSX Mavericks, with no fix other than:
Downgrade your OS
Upgrade Logic: there is no "upgrade path', so either buy Logic Pro X from the AppStore, or possibly locate a "second-hand" LP9 (Logic Studio 2) upgrade (EBay?)
CCT

A totally different project is played when project is played in full screen view and project is not editable

Hi
I have problems with my imovie 09. After several days of work with an imovie project I was again about to start editing my project after startup of my mac. I played through the project and everything seemed fine, but when a movie clip was moved infront of a still picture instead of after, the whole project became uneditable and unplayable. When trying to play the project in full screen mode a totally different project is played. Shutting Imovie and/or the mac down does not help. In some cases I have managed to get the red cursor moving along in my project. However, no movie is played in the screen in the right hand corner, -it is totally black, and the audio is again from a totally different project. I am not able to export the project as all the export options are grey. Some of the other projects worked fine and some did not, -and the functionality seemed a bit random from time to time after rebooting/ exiting and reentering imovie. My first guess would be that this is a memory porblem. However, looking at my activity monitor it seems that I'm only using 1.73 GB of system memory of a total of 4....I have tried remove old projects and also quite a bit of clips in my library to minimize memory use. Now it seems that all the rest of the projects are working fine, but my current project is still corrupt. I have tried copying the first clip of my project into a blank project, but it will only play in full screen mode, not in the screen in the right hand corner.
I am working on a mac mini with 2.26 Ghz intel Core 2 Duo, 4GB 1067 MHz DDR3.
I would be very grateful if anyone out there could help me out...Is my project totally corrupt beyond the point of no repair? Why has this happened, and how is it possible that something like this can happen without any kind of warning?
Thanks!

Thanks for your reply AppleMan1958. Unforunately the playback problem was only experienced in the project described, - all other projects played fine....and I tried a lot of different ways to do it...so I really believe the whole project, including the playback (which did not work in the editing window in the right hand corner either, -nothing was shown there and the red marker line would not move across the project) just suddenly become totally corrupt...However, after deleting the project as described above and installing imovie11 I have done the whole thing over again and completed the project without problems this time.
But thanks for the tip anyway!

Notification center interferes with full-screen apps (incl. games)

The new notification center interferes with games.
When you are making control movements on the screen, a little grey tab keeps appearing at the top middle of the screen.
Just from using it, it seems the notification center has a full-screen mode and a normal mode. For apps which are running in full-screen (includes games, but also built in apps such as YouTube and Photos when they are in full-screen mode), the gesture which normally brings down the full notification center just brings down a little gray tab at the top middle of the screen. You can then slide that tab down, if you really want the notification center.
But in games, the tab keeps appearing when you don't want it, and it has nothing to do with the gameplay. Even in Photos and YouTube, I would be quite happy if the tab did not appear at all in full-screen mode (a single click on these apps takes them out of full-screen mode, then you can drag down the notification center anyway).
It would be very appreciated if an iOS update could add a notification center Settings option to disable the notification center tab drag-down, in full-screen mode.
I can understand that Apple are very unlikely to add an option to disable all notifications in full-screen mode; fair enough. And if a new notification does appear during a full-screen app, then of course dragging that down should still bring in the full notification center. What I don't want is the little grey tab appearing - when I'm just operating with an app in full screen mode, and no new notifications have arrived.
Mike

I agree with both posts and have the exact same issues with iOs 5. I also feel that I've been juked by Apple into upgrading to iOs 5. I had absolutely no desire to slow down my games and add a feature that would interfere with said games, which is all I've gotten with the notification center. No disable option? Seriously, that is just one of the most absurd things I can imagine.
And I hate to burst Apple's bubble, but your CPUs and iOs do NOT multi-task unless it's the 4s (which has two cores). If you (Apple) have the notification center running in the background at the same time that I'm playing my game or typing, the iphone 4 and all versions before it are going to lag or skip while processing the notification center while it ignores the current thread (ie games, interface, etc)! This is the reason the old system was implemented the way it was. I know this for a fact (for example, any games would pause immediately when you recieved a text message, because the iphone is only capable of processing 1 thread).
Honestly, I think apple intentionally added this feature in this way to try to force users to migrate to the 4s because it's a dual core phone, and it won't experience as much lag when running two tasks.
Just add a disable option, some people NEED the performance we had in iOs 4!

Will this help with windows vista u tube not playing in full screen?

I have windows vista and hadn't seemed able to get full screen to work with u tube. I tried going to google chrome and then to the u tube page. Click on the icon in the address bar that shows www.youtube.com ( It's on the left next to the address ). This shows you view site information. Run you cursor error over each permission on the right. You are allowed to change each permission to allowed by you. I allowed by clicking on each one all but the: locations, notifications, mouselock, and media. When you are done, you may click outside of this box to have it go away. The you tube page will ask you to reload to have permissions take effect. After I did this I also went to the box to customize and control google chrome wich is way up in the right corner either having three small lines or may be a gear box. I clicked on this and went to tools and then clicked on extensions. It will show you google docs, mcafee, or whatever you have. I went down and clicked on get more extensions. This should bring you to chrome web store. The search is up on the left. type in : window expander for youtube and hit the enter key. click on add to chrome next to the window expander appliction. I exited out and went back to you tube. My videos play in full screen. Hope this can help someone.

Here's the location:
http://teknigroup.com/courseware/Inventor%20Level-I/module1/images/clip0014.flv
Dennis Jeffrey, AICE, MICE
260-312-6188
Instructor/Author/Sr. App Engr.
Inventor 11 Professional SP2
HP Pavillion Zv5000 (Modified)
Geforce Go 440, Driver: .8185, 2GB RAM
XP Pro SP2, Windows Classic Theme
http://www.design-excellence.com
"Nickels55" <[email protected]> wrote in message
news:eqft16$35g$[email protected]..
> where s this file on your server "clip0014.flv"
>
> Create a direct link to it and post it here. If you
click on that link and
> get
> a page not found error then you need to have your server
setup for the
> correct
> FLV mime type:
>
>
http://www.adobe.com/go/tn_19439
>

Profit center - actual line items report

< MODERATOR: Message locked. Please post this message in the [Controlling forum|SAP ERP Financials - Controlling;. >
hi,
i am trying to excute ke5z, profit center actual line item report. it does not show any values even if i am running it wide open, I am testing this in our quality client, we have data all of 2008 posting to profit centers. i
is there some kind of config involved in this.
please let me know if anyone has an idea.
thanks.

Are you absolutely sure there are no values in any of the fields in selection screen? Recheck if any of the multiple selections (arrow at the end of each field) is active? Are you running it for record type 0 (actual) - you did say you are running it wide open, but I am just trying to reconfirm.
Just another think that you could check - when you are in the initial screen of KE5Z, go to Extras -> Data source (F5) from the top menu and make sure Database checkbox is checked.
Edited by: Srikanth Tamma on Sep 22, 2008 6:46 PM

Rented film, fully downloaded (eventually) press play now then screen goes to authorizing, then goes black blank, no film , repeated process 3 times, still no joy. first and last time I rent a film with Apple, how do I get my money back ? Thanks

Rented film from Apple TV fully downloaded (eventually) press play now then screen goes to authorizing for 10 mins, then goes black blank, no film , repeated process 3 times, still no joy. first and last time I rent a film with Apple, how do I get my money back ? Thanks

First, that cannot be an iBook G4 as that machine cannot run Snow Leopard let alone Mountain Lion. To run Snow Leopard it has to be an Intel processor, not a G4. What does it show as the Model Identifier in About This Mac, More Info, System Report, Hardware, Model Identifier?
Second, if you have erased the hard drive there should not be remnants of any prior content. Even though Disk Warrior is saying nothing is wrong with the hard drive, it sounds as though there are problems. You may want to consider simply replacing the hard drive so there are no questions about faults. A good source is OWC, http://www.macsales.com where they also have on-line videos showing how to do the replacement.
Third, you could also try again to restart using the Snow Leopard DVD/CD and use Disk Utility on that install disk to erase again, and do it a couple times, then try to install. If it continues to refuse, then it sounds as though there is a fault with the hard drive.

My first gen iPad has a 11/2 inch black line on screen. What's wrong?

iPad has a one and a half inch line on screen. What's wrong and how can I fix?

Hi Chuckfrombc,
Based on your description, it sounds like there may be a hardware issue with your display. You may want to consider taking it in for evaluation and service; you may find the following page helpful (if you are not located in the United States, make sure to select your correct country from the dropdown):
Service Answer Center - iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Regards,
- Brenden

Asset Off Line Splash Screen burnt to DVD

I had the Red 'asset off line' splash screen burnt to a DVD earlier today, what I had done was accidentally deleted a slideshow folder from my hard disk believing it was unused.
In Encore the slideshow was already built, I assume, and you could preview it and play it in the monitor window. Check project ran without errors as did the Build DVD, but when I went to play the DVD the slideshow soundtrack played ok but the slides were replace by a red 'asset offline' slash screen similar to the one in PP that zoomed in and out on the screen.
My mistake in the first place, I hold my hands up to that one. But shouldn't Encore have warned me about the mistake I was making in some way ?
Kevin

Joe,
No I opened Encore and this project after the slides were deleted,
I had no warnings when I opened the project, or at anytime during the build process.
After I noticed the problem on the DVD, I restored the deleted folder and all was ok from then on.
Kevin

Green vertical lines on screen

dvd player sony model dvp ns57p has green vertical lines on screen. any suggestions. get a new playler blueray?

Please try the steps below:
Adjust the color settings on your TV to make sure the issue is not a simple screen adjustment.
Make sure the disc player is properly connected. The disc player should be connected directly to a TV or Audio/Video (A/V) receiver. It should not be connected to a VCR. This issue can occur if a video signal encrypted with copyright protection passes through a VCR.
NOTE: When the disc player is connected through an A/V receiver, you should also check the connections between the A/V receiver and the TV.
If using A/V cables, check that the red, white, and yellow plugs are securely connected to the same colored jacks on both the disc player and TV (or A/V receiver).
If using component cables, check that the red, green, and blue plugs are securely connected to the same colored Y/P B /P R jacks on both the disc player and TV (or A/V receiver).
If using an S-Video cable, check that it is securely connected to both the disc player and TV (or A/V receiver).
Try playing a different disc to see if the issue only occurs with the one disc.
If the issue is occurring with more than one disc, replace the cables connecting the disc player to the TV (or A/V receiver).
NOTE: When the disc player is connected through an A/V receiver, you should also try changing or replacing the cable between the A/V receiver and TV.
Try connecting the disc player to different input jacks on the TV (or A/V receiver) and change the input mode accordingly to determine if the issue is with a particular input jack.
Try playing another video source (such as a VCR) to determine whether or not the issue only occurs with the disc player.
If the issue occurs with other video sources, then the problem is with the TV (or A/V receiver).
If the issue only occurs when using the disc player, then the disc player may require service.
If my post answers your question, please click on "Accept as Solution"

My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate.

My .MP4 video file won't "play video full screen" in Muse after I publish my .OAM out of Edge Animate. When I "Preview In Browser" through Edge it plays (I have created a shape and used the "play video full screen" snippet) in full screen mode just fine. When I "Preview Site In Browser" through Muse and click on the shape to PLAY VIDEO FULL SCREEN, it does nothing. I am new to both programs and can't figure out why it will work out of the preview window in Edge and won't work when I publish to Muse. Does anybody have an answer or a work-around for me?

Hi Watch this video,
If this is what you need, you can get it here [[zazaalaza's]].mulib - Google Drive

Balancing field "Profit Center" in line item 001 not filled

When i am doing Posting with clearing(FB05) i am getting the below error message "Balancing field "Profit Center" in line item 001 not filled"
Background: When we are doing the MIRO transaction we have used a diffrent profit center than it came from the Purchase Order where we have added extra cost and included the new line items under GL tab and posted the Invoice.
Now i want to tranfer that to a diffrent Vendor and clear it. So i used FB05 transsaction. When i tired to do the transfer posting with clearing i am getting the error message "Balancing field "Profit Center" in line item 001 not filled" As we have under the document split Zero balances check box checked along with the Profit center Mandatory for field Profit Center. The system could not determine which profit center it has to use.
Thanks in advance.

Hi Kiran,
Could you tell me how you are able to resolve this issue as we are having the same issue.
Did you use the substitution rule?
Please let us know.
Thanks,
Madu

Bal field "Profit Center" in line item 001 not filled at the time of F-53

We are in ECC6
I have posted a vendor document. The entry is shown as under.
     GL                           CC     PC     Segment
Dr     Expense GL-1     RV01     RGV1     Hyderabad
Dr     Expense GL-2     RV02     RGV2     Mumbai
Cr     Vednor a/c
but when i am posting a payment document (Dr Bank GL and Cr vendor a/c) to this vendor I am getting the following error.
Balancing field "Profit Center" in line item 001 not filled.
I have check ed the configuration setting in this regard. Zero balance, mandatory fields for profit center and segement check box is enabled. And also the inheratence check box is also enabled.
Pls suggest soulution soon for the above problem.

Hi,
Try to default the profit center in FAGL3KEH for the Bank account and try posting.
In SAP, the vendors and customers cannot be assigned to any profit center. They derive the profit center from the profit center picked from the GL as in the case of the expense entry that you mentioned.
Try to assign a default profit center and check.
Regards
Hari

How do I make multiple videos on one slide play in full screen when selected?

I want to put four short videos per slide and have each play in full screen when I click on them. How can I do this? Thanks

I've figured out to hyperlink to the video in a different presentation, which works. BUT how do I end back on my original slide?

Posting to FI error *Balancing field "Profit Center" in line item 001*

Hi Gurus,
I have been posting my payroll results to FI accounts and CO (internal order).
I executed the following transactions:
1) PC00_M99_CIPE - Create Posting Run
following are the results of generated document and its a successful run:
17.01.2009 Posting Document
Run              0000000051
Company Code     2000
Document         0000000011
PostingCurrency SAR
Reference        XXXXX00001
Doc. Type        AB
Run Type         PP
Posting Date     31.01.2009
Document Type    G/L Account Document
Document Date    31.01.2009
Bus. Transaction HRP1
Account Number with Text                       PTyp     CO Accnt A         Debit Amount         Credit Amount
55000000   Dir Sal/wag bonus                  G/L       OrdNo 100000      6,495
13113000   "Salary, wage pybl"                G/L                                                                6,495 SAR
Posting document 0000000011                                                      6,495                      6,495 SAR
17.01.2009 Posting Document
Total of All Documents
Account Number with Text         PTyp CO Accnt A                  Debit Amount         Credit Amount Crcy
                                                                               6,495                    6,495 SAR
2) PC00_M99_PPM - Generate Posting Run for Payments
when I have run above mentioned transaction
I am getting the following error:
Messages for Document 0000000012
       Error in document: HRPAY 0000000012 SNDCLNT101
       Balancing field "Profit Center" in line item 001 not filled
I would really appreciate a valuable suggestion .
Thanks in Advance !!
KPJ

Hi KPJ,
I am also facing same problem please tell me the solution.
Please give me the reply.
Regards,
Leelaprasad.A

Center play line on screen

Similar Messages

Maybe you are looking for