Center speaker not working
Have just hooked up Creative SBS 560 - 5.1 speaker system. All the speakers working fine except the center speaker. I've plugged all the speakers into the center speaker jack and none of them work there. When plugged into their correct positions, they work fine. Any suggestions as to what to do to make the center speaker work. Thanks for any help.
What sound card are you using? If you are using Creative 5.1 sound card, try enabling the CMSS feature.
Jason
Similar Messages
-
Audigy 2 Value center speaker not working?
So I have vista ultimate x64 and logitech g51 5.1 speakers. The center channel does not work at all. It's pretty much a brand new set and swapping out the speaker does not help, so I think it is a sound card/ driver problem. The problem is in the sound test area, and is not just because I am playing 2.1 sound without CMSS. Does anyone know what is up?
it sounds to me like you have your matrix button pushed in. This button will try to make sound come out of all speakers. If it is depressed and you are testing a five to 1 sound, it will not play through the center channel. I have an old set of logitech speakers and with the matrix button pressed in, I get no center channel because it is trying to upsample stereo to all five speakers. Try that please.
Thanks
jmacguire
Cheers,
jmacguire -
Center speaker not working w/ Audigy 1
So I just bought a brand new set of 5. Logitech Z-5500 Digital speakers.
I have everything plugged into correctly. The speakers into the subwoofer where they are supposed to go, the rear/front connections on the sound card and the digitial out for the center/sub connection.
I have both windows and the surround mixer settings set to 5. sound, yet it seems the audigy isn't allowing it to work for some reason.
When I do the test via my speakers control (it has it's on "test" to test the speakers, etc) it plays fine out of the center speaker when it's supposed to.
However when I do the test through the surround mixer, it doesn't work through the center speaker, it just seems to go mute when it gets to it.i have the same problem, switching the z5500s to PLII movies or music works for most things. when i play games though, i get no sound from the center channel unless i switch to 6 channel direct mode on the z5500s, then i get center channel sound, but at the same time the rear channel sound plays at about .5x the strength of the front. its very frustrating. when i walk away from someone i hear them louder than when i am looking right at them
-
I-pod hi fi center speaker not working?
does anyone know how you get this repaired? or better still how do you get inside this thing?
In case Apple is not longer repairing this product, then you have to find a 3rd party Audio company instead. Bear in mind iPod HiFi is an audiophile device and not a computer product.
I am in a doubt the fixing cost will be cheap. In Hong Kong, there are few good Audio repairing companies around and hope you will get in your area too -
Inspire p5800 - center speaker doesnt work
hi there...
i got a little problem... i have SB audigy 2 and inspire p5800...
I set i up and the center speaker doesnt work at all.. no madder what i do.. i can hear the center speaker snear or something.. but i cant hear any music from it at all...
If i try calibrate the 5.1 the center speaker makes sound like it was the subwoofer... any solution for this? i checked the cables and they are in the right places..
hope ya can help
JonesHm, that is certainly odd......make sure the jack that goes from the subwoofer to your sound card is in the correct spot.
Not sure but you may have 3 wires going to your soundcard - refer to the user manual for the correct order.
If you are using digital - well then - I don't have a clue unless you hooked that digital cable to the wrong place on the soundcard as well.
Good luck. -
HP Officejet Pro L7590 Printer - HP Solution Center does not work
I am not able to get the Solution Center suite to work because the installation has an error. I am using Windows 7 Home Premium. The printer I am installing is the HP Officejet Pro L7590.
If I go to Devices and Printers and add the printer. The driver Windows 7 driver would work, it would detect the printer and the test page and everything would be fine.
However, if I install using the software provided by HP for the L7590 it would result in an error and it would not work.
The failed driver installation is only from installing the full bundle software provided by HP, if by itself through Windows 7 it would be fine.
Because of the failed installation using HP software the HP solution center does not work.
In Devices and Printers, the printer has the yellow exclamation point requiring troubleshooting, I click on troubleshoot and no device drivers were found. In addition, I could not remove the printer. Before installing the HP software, I could successfully install the printer and there would be a green checkmark, and there would be an option to remove the printer. This leads me to believe HP has a faulty software bug that is causing the error.
I am suppose to use the HP add a printer shortcut that populated on my desktop after installing the software, the first time it would show the failure to successfully install the driver, afterwards it would not even detect my printer if it is plugged in. If I remove the usb and reinsert it, the Windows would just show the failed driver. I repeat, it failed after I install the software, it works fine without. The primary reason I want the software is to use the scanning feature.Hello NickRT, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having software installation issues. i would like to try and assist you.
I would suggest Uninstalling the Printer Software.
Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration. You can do so by following this document: How to perform a clean boot in Windows.
Once the computer is in clean boot mode, I would reinstalling the HP Officejet Pro Full Feature Software and Driver.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
My macbook pro external speaker not working! help please
My macbook pro external speaker not working! help please
1. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Pllug in the speakers.
Do they show up?
Make sure that Mute is not enabled.
2. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best. -
IPhone4S external speaker not working
i hv try clear the headphone jack but not working,
clear the dust outside the speaker not working
what else can i do, as i don't want to update my mobile which it might coz all the memories within the mobile lost....
what to do??RRFS Northern Nevada
Re: External speaker port not working
May 11, 2012 8:25 AM (in response to Tremolo Arm)
A few days ago I tried to help a guy with Bose External Speakers and we found the male jack isn't quite long enough to make the connection:
PROBLEM SOLVED!!
Just to share information for others who might come across this problem with Bose or any other external speakers, where the male jack doesn't quite go in far enough for the MacBook to recognize it, here is the solution that worked for me:
http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
This is a very inexpensive solution and works great for me. I'm listening to my Bose speakers now and they sound great!! Thank you to all of you for your suggestions and help troubleshooting. -
U10i sony ericsson speaker not working...need help
u10i sony ericsson speaker not working...need help...thanks
Anyway thanks... Yesterday my handphone drop again,than the speaker suddenly recover.
-
After upgrading IO5 speaker not working
Please advice how to resolve speaker problem after upgrading to IO5, speaker not working and volume bar is missing too.
What Troubleshooting Steps have you tried...
The Basics are Restart... Reset... Restore
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
iPhone Reset
http://support.apple.com/kb/ht1430 -
Altec Lansing inbuilt speaker not working in HP Pavilion dv1000
Altec Lansing inbuilt speaker not working in HP Pavilion dv1000 , but i can hearing the sound through headphone in headphone socket..
Audio driver installed successfully... If speaker fault, how to remove my laptop, fix it..?
Please solve my problem..Here is the Service Manual:
Manual
Section 5.14 shows removal of the speaker assembly. You have to follow all the steps leading up to that, though.
Speakers for $7 shipped on ebay:
speakers -
My new iPhone 4S speaker not working why?
my iPhone 4S iOS 7.0.3,model MF266HN/A,8GB one speaker not working why? What can I do?
All iPhones are mono. Stereo is only available on Earphones.
Bottom left is mic and right is the speaker. -
Two day ago was fine i dont what happed now went a want to talk with speaker not work icant hear music nathing with speakers i have to use the hearphones .. My phone just have like 3 month never fall.
Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Install the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Dc7700, window7, machine speaker not working. migrating from window xp to 7
dc7700, window7, machine speaker not working. migrating from window xp to 7
Hi:
Just download and install the latest Realtek HD audio driver from the Realtek site.
Accept the agreement. Download and install either the first or second driver on the list depending on whether you installed the 32 or 64 bit version of W7.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
Paul -
Notification center does not work at all with mail
notification center does not work at all with mail there is no sonud no banner . i try to chek and unchek thas box may it is something may effect but still not working where is the notifiication center they said to us about it but i want be fair it's working for imessege and it's not working also for app store update like they said there is abig kiind of joke. i use macbook air mid 2011.
Have you changed the system voice to an English one in system preferences?
Maybe you are looking for
-
Seeing all open windows in 10.7
I just upgraded from 10.6.8 to 10.7.5. I miss being able to use a hot corner to see all open windows. I cannot find that in 10.7. Does anyone know where it is?
-
How long to boot MacBook pro 13" late 2011?
It takes 1 minute 30 seconds to startup my macbook pro 13" late 2011 (2.4ghz i5 processor, 4GB RAM) This seems like a long time? I have Microsoft Office and Photoshop installed, will this slow it down? Thanks!
-
Acrobat Pro 9.5.0 crashes on ClearScan OCR but not Searchable Image OCR
I have Windows and Mac copies of Acrobat Pro 9.5 running on my computer (both version 9.5.0). My computer is an iMac running Mac OS X 10.7.3 (Lion) with the Parallels hypervisor, version 7.0.15055 installed, in which is running Windows XP. As at 11 A
-
My ipod nano this morning has started to tell me the accessory (lightening to 30-pin adaptor) I use for playing it through my docking station is not supported. It worked fine up until last night. Does anyone know why this might be?
-
Question about SWING and ActionEvent Object.
When using a graphical component like a JButton, one typically adds an ActionListener Object to that button using the addActionListener method, in order for a click/appropriate action to execute desired Java code. One's desired code is within one's o