CentOS-4.2-x86_64

I have an installation problem with CentOS-4.2-x86_64 on my Compaq computer. I get an error during installation which means I do get the local-disk driver bundled up with the this release of the OS for my Compaq PC. Here is the error message:
An error has occurred; no valid devices were found on which to create new file systems. Please check your hardware for the cause of this problem.
BTW, I don't have this problem when I install Centos4.4 as the drive gets recognized and partitioning gets underway; but I must use Centos4.2 for firewire driver reasons, which Cenots4.4 does not have... so, it's a catch-22 problem...
Any help or suggestions will be greatly appreciated!
Vil

Hi Jer:
I am not sure how to make a driver disk. Where would be my source for drivers, what would the driver be called, and how would I install the driver?
I have all four iso images that I burned into a CD and that's all I have (CentOS 4.2 64 bit).
I know for a fact that because my hardware is brand new and came with a serial hard drive (ATA), and, apparently, VenOS 4.2 supports/has drivers for IDE drives (older drive technology) alone. The question is where to get and incorporate driver for ATA drives
into 4.2 -- Centos 4.4 has the driver, and I must stick to 4.2.
Thx,
Vil

Similar Messages

Unable to start fms on centos x86_64

Gettting the following error after installing fms on the
centos 4.3 x86_64:
[root@peggy fms]# ./fmsadmin
./fmsadmin: error while loading shared libraries:
libssl.so.4: cannot open shared object file: No such file or
directory
openssl is installed, and the lib is there -
[root@peggy fms]# ls -l /lib/libssl.so.4
lrwxrwxrwx 1 root root 16 May 4 08:46 /lib/libssl.so.4 ->
libssl.so.0.9.7a
I have this running fine on a 35 bit fedora core 4 box. Has
anyone else seen this?
Thanks,

If this helps, here is a snip from an strace:
open("/usr/lib/libssl.so.4", O_RDONLY) = 3
read(3,
"\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260\343"...,
512) = 512
close(3) = 0
stat64(0xffffcff0, 0xffffd05c) = 0
writev(2, [{0xaffffdc04, 8597116581}, {0x24006da9a8,
8597116585}, {0xb006dcdef, 8597116576}, {0x1e006dcdd0, 8597116576},
{0x19006d98bd, 4302149301}, {NULL, 0}, {NULL, 0}, {NULL, 0}, {NULL,
0}, {NULL, 0}], 10)
= 121
exit_group(127)

.oui error in the install of oracle database client in a linux CentOS

I am installing oracle database client in eqipo linux CentOS, after making all the passages for the creation of the user oracle and its groups beginning the ./runInstaller application and appears to me the following error:
./runInstaller: line 66: /install/.oiu: cannot excecute binary file
as I can solve this
they can notify me the possible solution to the following e-mail?
[email protected] or
[email protected]

You may want to check these references for CentOS install:
Installing 10g Release 2 on Centos 4.3 & 4.4
http://www.dizwell.com/prod/node/50
http://download-uk.oracle.com/docs/cd/B19306_01/install.102/b15660/toc.htm
Oracle® Database Installation Guide
10g Release 2 (10.2) for Linux x86
Part Number B15660-02
Installing Oracle 10.2.0.1 on CentOS 5.0 (x86_64)
http://bderzhavets.blogspot.com/2007/04/installing-oracle-10.html
Installing 9i (9.2.0.1) Database on Centos 4.5
Installing 9i (9.2.0.1) Database on Centos 4.5
installing 10.2.0 on CentOS
Re: Got "java.lang.NullPointerException" installing 10.2.0 on CentOS
Link error installing 10gR2 on CentOS 4.4
Link error installing 10gR2 on CentOS 4.4
Re: 10g in vmware Centos
10g in vmware Centos
~ Madrid.

Installing SunStudio12 on CentOS

During installing SunStudio 12 on CentOS 5.1-x86_64-bin, i've got a failed message:java.lang.NullPointerExeption.On the system was installed jdk1.5.09 and netbeans 5.5.1, from SunStodio12 -rpm.If someone can help me with that trouble...please give some advice

Hi;
Could somebody suggest me any documents for installing Oracle 10.2 on CentOS 6.2(Linux x86-64). CentOS is a freely available Linux distribution that is community supported and designed to be similar to Red Hat Enterprise Linux. It is not specifically sold by, or endorsed, by Red Hat Linux.
CentOS is not a certified and supported operating system for Oracle RDBMS software and there are no plans to add support for CentOS. Supported operating systems are listed in the 11gR2 Oracle Installation Guide in chapter 3.
Found few documents in metalink but they are for RHEL 5.
Can I follow the same, or are there any extra OS changes required for release 6.2.Please use OEL 5.x for your installation which is certifed and which you can download from e-delivery oracle site freely.
PS:Please dont forget to change thread status to answered if it possible when u belive your thread has been answered, it pretend to lose time of other forums user while they are searching open question which is not answered,thanks for understanding
Regard
Helios

X86_64 v10.1.0.1 or X86 (32-bit) v10.1.0.3?

I'm about to install a new Secure Backup server -- OS is CentOS 4.4 x86_64. I see the only x86_64 version is 10.1.0.1. There is a linux 32-bit version with a higher rev-level.
Which should I install - 64-bit or 32-bit?

I got an answer to this from Oracle Support. I actually spoke to a person that used to work for Reliaty (the company Oracle bought to get OSB).
The answer is that the patch levels changed each time they released a new platform. The software is identical. This is different from the way Oracle handles other software.
So, use the appropriate platform and don't worry about the patch levels.
They hope to get everything at the same level eventually.

FMS won't run on RHEL 6.2 EC2 instance - _defaultRoot__edge1 experienced 1 failure

I've got a fresh RHEL 6.2 64-bit instance on EC2. I've turned off the firewall and have installed an FMS 4.5 dev server. In the logs directory I have admin and master logs (only). The admin logs look ok:
#Fields: date
time
x-pid
x-status
x-ctx
x-comment
2012-02-29
09:24:26
1144
(i)2581173
FMS detected IPv6 protocol stack!
2012-02-29
09:24:26
1144
(i)2581173
FMS config <NetworkingIPv6 enable=false>
2012-02-29
09:24:26
1144
(i)2581173
FMS running in IPv4 protocol stack mode!
2012-02-29
09:24:26
1144
(i)2581173
Host: ip-10-204-143-55 IPv4: 10.204.143.55
2012-02-29
09:24:26
1144
(i)2571011
Server starting...
2012-02-29
09:24:26
1144
(i)2631174
Listener started ( FCSAdminIpcProtocol ) : localhost:11110/v4
2012-02-29
09:24:27
1144
(i)2631174
Listener started ( FCSAdminAdaptor ) : 1111/v4
2012-02-29
09:24:28
1144
(i)2571111
Server started (./conf/Server.xml).
The master logs contain these lines, repeating every 5 seconds:
2012-02-29
10:43:17
1076
(i)2581226
Edge (2790) is no longer active.
2012-02-29
10:43:17
1076
(w)2581255
Edge (2790) _defaultRoot__edge1 experienced 1 failure[s]!
2012-02-29
10:43:17
1076
(i)2581224
Edge (2793) started, arguments : -edgeports ":1935,80" -coreports "localhost:19350" -conf "/opt/adobe/fms/conf/Server.xml" -adaptor "_defaultRoot_" -name "_defaultRoot__edge1" -edgename "edge1".
The FMS install failed, complaining about a missing libcap.so until I installed the libcap.i686 package. The following libcap packages are now installed:
libcap.i686
2.16-5.5.el6
@rhui-us-east-1-rhel-server-releases
libcap.x86_64
2.16-5.5.el6
@koji-override-0/$releasever
libcap-ng.x86_64
0.6.4-3.el6_0.1
@koji-override-0/$releasever
libpcap.x86_64
14:1.0.0-6.20091201git117cb5.el6
Any help would be most appreciated.
/Ed.

I had the same problem on CentOS 6.2 x86_64, albeit not on EC2. It seems that the installer creates a symlink to the i686 libpcap (libcap.so.1 -> /lib/libcap.so.2) and fmsedge won't run with it. Manually removing that symlink and instead linking to the libcap.so.2 in /lib64 solved the problem for me.
cd /opt/adobe/fms
rm libcap.so.1
ln -s /lib64/libcap.so.2 libcap.so.1
HTH, Jeremy

Why does installer prompts for missing libXp.so.6 when it is ready installe

Hi,
I'm trying to install 10gr2 on centos 6.3 x86_64 bit system.
when I running the runinstaller, I encountered the following problem:
bash-4.1$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-3, SuSE-9, redhat-4, UnitedLinux-1.0, asianux-1 or asianux-2
Passed
All installer requirements met.
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2012-08-18_07-13-53AM. Please wait ...bash-4.1$ Exception in thread "main" java.lang.UnsatisfiedLinkError: /tmp/OraInstall2012-08-18_07-13-53AM/jre/1.4.2/lib/i386/libawt.so: libXp.so.6: cannot open shared object file: No such file or directory
     at java.lang.ClassLoader$NativeLibrary.load(Native Method)
     at java.lang.ClassLoader.loadLibrary0(Unknown Source)
     at java.lang.ClassLoader.loadLibrary(Unknown Source)
     at java.lang.Runtime.loadLibrary0(Unknown Source)
     at java.lang.System.loadLibrary(Unknown Source)
     at sun.security.action.LoadLibraryAction.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.awt.NativeLibLoader.loadLibraries(Unknown Source)
     at sun.awt.DebugHelper.<clinit>(Unknown Source)
     at java.awt.Component.<clinit>(Unknown Source)
understand that this has been discussed in libXp.so.6: cannot open shared object file: No such file or directory
I've followed http://www.askrenzo.com/oracle/grid/libXp_missing.html on how to verify whether libXp is installed or not
[root@localhost lib64]# uname -a
Linux localhost.localdomain 2.6.32-279.5.1.el6.x86_64 #1 SMP Tue Aug 14 23:54:45 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
[root@localhost lib64]# cd /usr/lib64
[root@localhost lib64]# ls -l libXp*
lrwxrwxrwx. 1 root root 16 Jul 6 20:48 libXpm.so.4 -> libXpm.so.4.11.0
-rwxr-xr-x. 1 root root 72928 Aug 17 2010 libXpm.so.4.11.0
lrwxrwxrwx. 1 root root 14 Aug 18 06:59 libXp.so.6 -> libXp.so.6.2.0
-rwxr-xr-x. 1 root root 36248 Aug 19 2010 libXp.so.6.2.0
and it is installed, yet the installer is complaining that it cannot find libXp.
would really appreicate if someone could tell me what's wrong?
thanks

oraclewannabe2 wrote:
I'm trying to install 10gr2 on centos 6.3 x86_64 bit system.If this is not a typo, you should be aware that 10gR2 is not certified to run on RHEL/OL/CentOS 6. You should use CentOS 5 and follow the pre-requisites for the installer. The first version of database certified to run on RHEL/OL/C6 is 11gR2 11.2.0.3.
Regardless of whether you actually have the pre-reqs installed properly, any version prior to 11.2.0.3 will probably always fail the pre-req check on 6.

Adobe Please Explain

   Dear Adobe I can find instructions and a list of needed for modifying Apache to work with HLS for Apple/IOS devices. However I cannot use .dll on Linux but I can possibly use the .so files ....so can you verify that FMS 4.5 HLS for Apple/IOS devices works on Linux by installing just the 3 .so files below? If it is in short why don't i need the .dll? Please answer so I don't spend days trying to install FMS 4.5 in a way that is not documented or tested by you. Also is installing FMS 4.5 and HLS for Adobe/IOS devices possible on IIS? Where do i get instructions for IIS? Thanks for your time.
                                                                                                                                                                                                                                                                                                                     --calmchessplayer
          rootinstall/Apache2.2/modules/adbe_dme.dll
rootinstall/Apache2.2/modules/adbe_license.dll
rootinstall/Apache2.2/modules/asneu.dll
rootinstall/Apache2.2/modules/hds.dll
rootinstall/Apache2.2/modules/libeay32.dll
rootinstall/Apache2.2/modules/libexpat.dll
rootinstall/Apache2.2/modules/mod_f4fhttp.so
rootinstall/Apache2.2/modules/mod_hlshttp.so
rootinstall/Apache2.2/modules/mod_jithttp.so

Whats this he says "For linux there is a diffrent list of so file"   ?????????? See my confusion? Here is what is in the FMS 4.5 apache 2.2 modules directory on centOS 5.7 x86_64
libadbe_licens.so
libasneu.so.1
libcrypto.so.10.0.0
libexpat.so.1
mod_actions.so
mod_alias.so
mod_asia.so
Tons more prepended with   mod_ >>>>>but non of the files Niten suggest exsist in that directory. Please send and Adobe engineer to help. I don't see how you can claim linux or apache support for that matter but know nothing about it.
:For linux and windows there are different so file even for these modules.. List here is the so files and dlls required for the HLS + HDS on the windows server. For linux there is a different list of so files.. "

Cannot create guest

i'm create via vm manager
message:
Check memory, mac address and networktype
Register virtual machine img
Register virtual machine geninfo
Register virtual machine networks
Register virtual machine disks
Register virtual machine cdrom
Create HVM: preJobs
Failed. Result - failed:<Exception: failed:<Exception: cdrom('/var/ovs/mount/CA3FD20CC7C945DF91209C79502B7DED/iso_pool/CentOS-5.4/CentOS-5.4-x86_64-bin-DVD.iso') does not exist.>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVMInstall.py", line 130, in xen_install_vm_hvm
raise Exception("cdrom('%s') does not exist." % cdrom)
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVMInstall.py", line 100, in install_vm_hvm
else: raise Exception(rs)
[root@vm1 ~]# ls -l /OVS/iso_pool
total 0
drwxr-xr-x 2 root root 3896 Nov 11 10:30 CentOS-5.4-x86_64
[root@vm1 ~]# service ocfs2 status
Active OCFS2 mountpoints: /var/ovs/mount/CA3FD20CC7C945DF91209C79502B7DED
[root@vm1 ~]# mount
/dev/cciss/c0d0p2 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
/dev/cciss/c0d0p1 on /boot type ext3 (rw)
tmpfs on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
configfs on /sys/kernel/config type configfs (rw)
ocfs2_dlmfs on /dlm type ocfs2_dlmfs (rw)
/dev/dm-0 on /var/ovs/mount/CA3FD20CC7C945DF91209C79502B7DED type ocfs2 (rw,_netdev,heartbeat=local)
Any advice?
thanks

The folder /OVS/iso_pool/CentOS-5.4/ does not seem to exist on your system. Have you renamed the folder after adding the ISO?

Iptables and FMS on RHEL V3

Sorry for awful english.
After successfuly instalaltion of FMS on my Linux box, FMS
works fine with iptables.
INIT: Entering runlevel: 3
Entering non-interactive startup
Applying iptables firewall rules: [ OK ]
Setting network parameters: [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface bond0: [ OK ]
Bringing up interface bond1: [ OK ]
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting irqbalance: [ OK ]
Starting portmapper: [ OK ]
Starting NFS statd: [ OK ]
Initializing random number generator: [ OK ]
Mounting NFS filesystems: floppy0: no floppy controllers
found
[ OK ]
Mounting other filesystems: [ OK ]
Starting xinetd: [ OK ]
Starting postfix: postalias: warning: My hostname khfms01 is
not a fully qualified name - set myhostname or mydomain in
/etc/postfix/main.cf
[ OK ]
Starting fms: [ OK ]
Starting console mouse services: [ OK ]
Starting crond: [ OK ]
Starting atd: [ OK ]
Red Hat Enterprise Linux ES release 3 (Taroon Update 8)
Kernel 2.4.21-47.0.1.ELsmp on an i686
But when I reboot the server, it stop at
/etc/rc6.d/K92iptables. And nothing happens.
root@khfms01 rc0.d]# init 6
INIT: Sending processes the TERM signal
INIT: Sending processes the KILL signal
Stopping atd: [ OK ]
Shutting down console mouse services: [ OK ]
Stopping postfix: [ OK ]
Stopping xinetd: [ OK ]
Stopping crond: [ OK ]
Unmounting NFS filesystems: [ OK ]
Saving random seed: [ OK ]
Stopping NFS statd: [ OK ]
Stopping portmapper: [ OK ]
Shutting down kernel logger: [ OK ]
Shutting down system logger: [ OK ]
Shutting down interface bond0: bonding: bond0: released all
slaves
[ OK ]
Shutting down interface bond1: bonding: bond1: released all
slaves
[ OK ]
Shutting down loopback interface: [ OK ]
Stopping iptables:
Do you have any idea?
Thank you.

I had the same problem on CentOS 6.2 x86_64, albeit not on EC2. It seems that the installer creates a symlink to the i686 libpcap (libcap.so.1 -> /lib/libcap.so.2) and fmsedge won't run with it. Manually removing that symlink and instead linking to the libcap.so.2 in /lib64 solved the problem for me.
cd /opt/adobe/fms
rm libcap.so.1
ln -s /lib64/libcap.so.2 libcap.so.1
HTH, Jeremy

32 bit Firefox Segmentation fault on 64 bit host

Hi,
I'm running CentOS 5.2 x86_64 (64 bit). I've done may
installs and got flash working using a 32bit firefox.
This is a newly installed host and I have a 32 bit firefox
installed yet flash 10 always causes a segmentation fault when I
access a web page that has flash content.
strace on firefox shows:
write(2, "/usr/lib/firefox-3.0.4/run-mozil"...,
97/usr/lib/firefox-3.0.4/run-mozilla.sh: line 131: 6278
Segmentation fault "$prog" ${1+"$@"}
I can't see the problem. As I said previously, I've had
firefox and flash (32bit) working perfectly happliy on 64 bit
before but it is now broken.
Any with any clues?
Thanks in advance.

Pl post details of exact OS, database and client versions.
Yes, you can install 32-bit client software, as long as you use a separate ORACLE_BASE and ORACLE_HOME to do so.
HTH
Srini

Disk Utility verify of ISO burn fails, but md5 sum matches

Frequently when I burn a large DVD iso to a DVD, via the "Burn" task in OS X Disk Utility, the process results in a failure at the end of the verify process. However, if I check the md5 sum of the DVD against the published md5 sum for the ISO, the checksum matches. From this I assume that the DVD must have written correctly. Why does DiskUtility report that the verify failed?
System: IMac 27-inch, Mid 2011
OS X 10.9.5 (13F34)
Disk Utility: Version 13 (517)
Example: Here's the md5 sum of the downloaded ISO, which matches the published me5 sum for the ISO on the Centos website, and of the written DVD.
     # get md5 of downloaded ISO:
$ md5 CentOS-6.5-x86_64-bin-DVD1.iso
MD5 (CentOS-6.5-x86_64-bin-DVD1.iso) = 83221db52687c7b857e65bfe60787838
     # Centos site reports: 83221db52687c7b857e65bfe60787838 CentOS-6.5-x86_64-bin-DVD1.iso
     # read DVD via dd and pipe to md5 to get md5 sum:
$ dd if=/dev/disk2 | md5
8726528+0 records in
8726528+0 records out
4467982336 bytes transferred in 63.966136 secs (69849183 bytes/sec)
83221db52687c7b857e65bfe60787838
DVD was written via DiskUtility:
     1. File | Open ->select ISO from downloads folder
     2. Select ISO in left panel of Disk Utility
     3. insert blank DVD
     4. click Burn icon (pops up Burn Disc in: SuperDrive. Ready to burn.)
     5. click Burn
Result:
     dialog with "writing track"... "verifying" "Unable to burn "Centos....iso." (Verifying the burned data failed.)

its not your drive the problem its the disk if you use singapore produce disk there is a way to find out what kind of disk is made by you could have a disk of poor quality made by Ricoh, singapore disk dual layer disk of of top quality.
apple needs to update the firmware KA19 to be compatible to the Ricoh disk.

Make to compile the Petalinux software image, but "returned an error code (127) ;make[1]: *** [pkg_stagefs] Error 255"

Hello,
I am trying ot make to compile the Petalinux software image( make in $PETALINUX/software/petalinux-dist) . Refer to the UG977 PetaLinux SDK Getting Started Guide.pdf
However, when it gets to "[INFO ] Expanding stagefs", there is be an error . How can i do it?
My petalinux was installed in Debian-6.0.6-amd64 OS Host (in VirtualBox on my win7).
Thanks in advance!
Here is my PetaLinux compilation progress output:
$PETALINUX/software/petalinux-dist$ make
[INFO ] Saving previous build.log
[INFO ] Building ucfront tool
[INFO ] Building kernel
[INFO ] Building kernel modules
[INFO ] Building include
[INFO ] Building rootfs
[INFO ] Setting up stage config
[INFO ] Setting up romfs config
[INFO ] Updating for microblazeel-v830-bs-cmp-mh-div
[INFO ] Updating package manager
[INFO ] Expanding stagefs
[ERROR] E: Sub-process /home/focs/petalinux-v2013.04-final-full/software/petalinux-dist/tools/packagemanager/bin/dpkg returned an error code (127)
[00:02] \ make[1]: *** [pkg_stagefs] Error 255
make: *** [subdirs] Error 1

I am seeing the same error.
Environment:
Host PC : CentOS-6.5-x86_64
Xilinx Tools: Vivado 2013.3
PetaLinux Release: 2013.10
Page 11 of The Petalinux Installation guide document shows the packages required for Petalinux installation in the 1st column. I have installed all these packages except libstdc++-4.4.6-4.el6.i686. The only version readily available was libstdc++-4.4.7-4.el6.i686.
http://www.xilinx.com/support/documentation/sw_manuals/petalinux2013_10/ug976-petalinux-installation.pdf
sudo yum install dos2unix iproute gawk gcc git gnutls-devel net-tools ncurses-devel tftp-server zlib-devel flex bison libstdc++-devel.i686 glibc.i686 libgcc.i686
Loaded plugins: fastestmirror, refresh-packagekit, security
Loading mirror speeds from cached hostfile
* base: centos.mirror.lstn.net
* extras: mirror.ubiquityservers.com
* updates: centos.gravityfish.com
Setting up Install Process
Package dos2unix-3.1-37.el6.x86_64 already installed and latest version
Package iproute-2.6.32-31.el6.x86_64 already installed and latest version
Package gawk-3.1.7-10.el6.x86_64 already installed and latest version
Package gcc-4.4.7-4.el6.x86_64 already installed and latest version
Package git-1.7.1-3.el6_4.1.x86_64 already installed and latest version
Package gnutls-devel-2.8.5-10.el6_4.2.x86_64 already installed and latest version
Package net-tools-1.60-110.el6_2.x86_64 already installed and latest version
Package ncurses-devel-5.7-3.20090208.el6.x86_64 already installed and latest version
Package tftp-server-0.49-7.el6.x86_64 already installed and latest version
Package zlib-devel-1.2.3-29.el6.x86_64 already installed and latest version
Package flex-2.5.35-8.el6.x86_64 already installed and latest version
Package bison-2.4.1-5.el6.x86_64 already installed and latest version
Package libstdc++-devel-4.4.7-4.el6.i686 already installed and latest version
Package glibc-2.12-1.132.el6.i686 already installed and latest version
Package libgcc-4.4.7-4.el6.i686 already installed and latest version
Nothing to do
When I run petalinux-buiild from the project Xilinx-ZC702-2013.3 directory, I see the same error.
$ cd petalinux-v2013.10-final/
$ source settings.sh
PetaLinux environment set to '/home/logic/petalinux-v2013.10-final'
INFO: Checking free disk space
INFO: Checking installed tools
INFO: Checking installed development libraries
INFO: Checking network and other services
$ cd ../Xilinx-ZC702-2013.3/
$ petalinux-build
INFO: Checking component...
INFO: Generating make files and build linux
INFO: Generating make files for the subcomponents of linux
INFO: Building linux
[INFO ] pre-build linux/rootfs/fwupgrade
[INFO ] pre-build linux/rootfs/peekpoke
[INFO ] pre-build linux/rootfs/uWeb
[INFO ] build linux/kernel
[INFO ] update linux/u-boot source
[INFO ] generate linux/u-boot configuration files
[INFO ] build linux/u-boot
[INFO ] Setting up stage config
[INFO ] Setting up rootfs config
[INFO ] Updating for armv7a-vfp-neon
[INFO ] Updating package manager
[INFO ] Expanding stagefs
[ERROR] E: Sub-process /home/logic/petalinux-v2013.10-final/tools/packagemanager/bin/dpkg returned an error code (127)
[ERROR] make[2]: *** [pkg_stagefs] Error 255
[ERROR] make[1]: *** [sub_build_component_/none/packages-repo/single/plnx-repo] Error 2
ERROR: Failed to build linux

Live webcam video becomes choppy after 600 connections per stream

Hi!
Server conf:
2 x Intel(R) Xeon(R) CPU L5410 @ 2.33GHz
16Gb RAM
2 Gbit ethernet channel
OS - Linux CentOS 5.5 x86_64
FMS4 Interactive
Live stream parameters:
320х240
qua_=87
bw_=200000
kf_=5
fps_=18
So, after approximately 600 connections to one stream video becomes choppy (periodically freeze, slow motions). CPU-usage at this time is 100-120% (maximum is 800%, 100% per each core), network usage is 500 Mbit/sec.
But second live stream(with few connections) at this server looks fine simultaneously with 600 connections at first stream.
Experiments with recommendation in "Configuring performance features" documentation chapter(enabling/disabling aggregate messages and configure the size of stream chunks) do not help.
Please, help me to find bottleneck!
Thanks for answers.
Apologisw my english.

What Flash Player version are you using at client-side?? have you tried changing the FP to the latest (in case if you are already using latest FP, then try to switch to some previous version) and see if this issue still remains?
Regards,
Shiraz Anwar

FPGA: Xilinx Versions supported by Linux Version

We do projects that cover many different versions of LabVIEW and therefore LabVIEW FPGA. We recently setup a Linux Compile Worker and a Compile Farm Server. We would like to use this worker for as many types of compiles as possible. To this point we've been able to find 13.4, 13.4(64-bit), 14.4, and 14.4(64-bit) Xilinix tools for the Linux compiler worker. Are the other Xilinx compile toolkits that have been used by LabVIEW FPGA available? More specifically I'm looking for 10.1, 12.4, and 12.4(64-bit).
Thanks,
Andy

Hi TJ,
Thanks a lot for your efforts! Following your suggestions I tried Centos 6.6 with the following results:
I installed a VM with the "CentOS-6.6-x86_64-netinstall.iso" and chose the "Software Development Option". After system setup I installed all availlable updates. Giflib seems to be included in the "Software Development Option":
[root@localhost rs6082]# more /etc/*-release
/etc/centos-release
CentOS release 6.6 (Final)
[root@localhost rs6082]# uname -r
2.6.32-504.16.2.el6.x86_64
[root@localhost rs6082]# yum install giflib
Loaded plugins: fastestmirror, refresh-packagekit, security
Setting up Install Process
Loading mirror speeds from cached hostfile
* base: ftp.fau.de
* extras: centos.bio.lmu.de
* updates: ftp.halifax.rwth-aachen.de
Package giflib-4.1.6-3.1.el6.x86_64 already installed and latest version
Nothing to do
After that I installed compile worker for LV2013SP1 (Xilinx 14.4) and tested it with a compile of an empty FPGA-VI. Connection to FPGA compile server worked without problems. But compilation worked only after installation of the additional packages from your other post:
yum -y update glib2 libuuid
yum -y install glibc.i686 libstdc++.i686 libgcc.i686 libuuid.i686 zlib.i686 glib2.i686 libSM.i686 libXi.i686 libXrender.i686 libXrandr.i686 freetype.i686 fontconfig.i686
Then I installed LV2014SP1 (Xilinx 14.7) and again it killed the older version ...
The Xilinx 13.4 - Tools are to my knowledge part of LV2012SP1. I haven't been able to install this version due to the problems described in this post.
I did not try your suggestion there to build the mono-packages from source so far. I assume I tried with the wrong installer, meant for RHEL5.6. Download of Xilinx13.3 SP1 still needs some hours...
I try your combination 13.4 + 14.7 as soon as possible.
Regards
Reinhard

CentOS-4.2-x86_64

Similar Messages

Maybe you are looking for