Central Contract

Dear SRM Experts,
In a Central Contract, I have a workflow scenario; once the purchasing group and purchasing org is determined then I need to find category manager. I'm unable to see Purchasing group and purchasing org field in BBP_PD_CTR_GETDETAIL.
If I pass the central contract no, I need Pur Org and Pur Group.
Your help is appreciated.
Thanks,
Selva

Hi Muthu,
Thanks for your reply.
When I'm passing the Central Contract guid, this table not giving any results. When I create a Central Contract in sourcing, then I check the guid in BBP_PD and pass the guid on BBP_PDORG table giving no results.
Any suggestion appreciated.
Regards,
Selva

Similar Messages

Badis for PO and Central Contract in SRM 7.0 in classic

Hi everyone,
I need you help. We are working in a implementation of SRM7.0 with ECC 6.0 Ehp 4 in a classic scenario. We want to know which badis we can use in order to change the purchasing group of the PO an Central Contract when their are transfered to ECC.
BR,
Ivá

Hi Muthu,
We are wondering if it is posible the following:
- An user wants to create PO form SRM. This PO in SRM has the Purchasing group XXX, but (for any reason) we need when this PO is send to ECC, the system changes the purchasing group to YYY.
BR
Ivá

Central Contract Management in case of Classic Scenario

Hi,
At our current implementation, requirement is to implement both Service procurement(with hierarchy) and Central Conract Management. I was exploring the possibility of utilizing Central Contract Management with Classic scenario.
Will the Central Contracts created in this fashion be available in Sourcing Cockpit for the buyer to select against Purchase Requisitions? Will the Central Contract be visible at all in SRM in this case ?
Please respond only with reference to Classic scenario.
Thanks,
Abhilash

Yes the Central Contract will be available in the Sourcing Cockpit, both local and classic scenario's. Yes the Central Contracts will be available for the creation of Purchase Requisitions in R/3 and to assign SOS in R/3.
Do know that for SRM 7.0 PI is required for setting up Central Contracts. This is promised to change with the release of EHP1 for SRM (due june 2010).
Kind regards,
Tim

Central Contract SRM

I have an issue, when I create central contract in SRM. The Select System is empty. No values is there on the screen.
Even though I try to create contract I have the error message "No customizing entry for SRDCLNT600 in table BBP_BACKEND_DEST"
We have SRM 7.0 , ECC 6.0 EHP4.
Regards,
Lya

Hi,
Are you just setting up the system or has it been working already ?
Pl check your "Define Backend Systems" set-up in IMG. There might be some problem here.
Best regards,
Ramki

SRM, MDM, ECC integration for central contract management.

Hi there,
I am questioned by a client with respect to the possibility of the following scenario -
1. There are several SAP back end systems in place.
2. SRM 7.0 will be implemented as single sourcing system.
3. The SAP back end systems carry different material master codes for the same material and this will remain the same and no cleaning effort to have a unique code across all systems is going to be done.
4. If we use MDM in the mix - will it be possible for the SRM system to act as a central contracting solution and create a central contract with the unique material code in MDM.
5. On distribution of this contract across to individual SAP back end system the back end should map the MDM code to correct material code in that respective system.
Any insights with respect to if this is possible with some enhancements or not at all possible will be highly appreciated.
Thanks and Regards,
Shantanu Joshi

Hello Shantanu Joshi
Your business scenario is standart MDM functionality
More about how it works you can read from:
MDM overview
and standart help links (see scenarios part):
http://help.sap.com/saphelp_mdm550/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
http://help.sap.com/saphelp_nwmdm71/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
Regards
Kanstantsin

SRM -- MDM -- ECC integration for central contract management for SRM 7.0

Hi there,
I am questioned by a client with respect to the possibility of the following scenario -
1. There are several SAP back end systems in place.
2. SRM 7.0 will be implemented as single sourcing system.
3. The SAP back end systems carry different material master codes for the same material and this will remain the same and no cleaning effort to have a unique code across all systems is going to be done.
4. If we use MDM in the mix - will it be possible for the SRM system to act as a central contracting solution and create a central contract with the unique material code in MDM.
5. On distribution of this contract across to individual SAP back end system the back end should map the MDM code to correct material code in that respective system.
Any insights with respect to if this is possible with some enhancements or not at all possible will be highly appreciated.
Thanks and Regards,
Shantanu Joshi

Hello Shantanu Joshi
Your business scenario is standart MDM functionality
More about how it works you can read from:
MDM overview
and standart help links (see scenarios part):
http://help.sap.com/saphelp_mdm550/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
http://help.sap.com/saphelp_nwmdm71/helpdata/en/43/D7AED5058201B4E10000000A11466F/frameset.htm
Regards
Kanstantsin

Can anybody explain how to configure the Centralized contract in SRM 7

Hi All,
Can anybody explain how to configure the Centralized contract management in SRM 7 with ECC EHP4 ?what are all that need to be perform in PI system.
Thank you,
praveen

Hello,
PI will be required here. You can also refer the config guides maintained at the belwo mentioned location.
Goto URL http://service.sap.com/srm-inst and then navigate to SAP SRM --> SAP SRM Server 7.0 -> Configuration Guides for SAP SRM 7.0
Best Regards,
Rahul

SRM 7.0 Central Contract- Distribution to backend failure

Hello experts,
We are implementing SRM 7.0 Central contracts scenario with PI.
The Contracts get created and Released but the problem is that the Distribution to backend fails. The Status in BBP_PD shows 'Distribution Incorrect' and the RZ20 gives an error 'Backend data cannot be read'.
We checked all the configuration settings (including the PI settings) and everything seems to be in order.
Would appreciate if someone could throw some light on the potential cause of the problem.
Thanks
Raman.

Message must have created . check all SRM outbound transactions .but PI could not catch them.
Note 1284369 - User attributes check in Contract distribution via services - what is your SP level in SRM 700.
The sap stratergy in earlier version
table in ECC BBPD_CTR_IDOCREF with message 019-This will result in setting the GOA status to 'Distribution Incorrect'.
so SAP might have tried the same way in CCTR as well, Once message are created and this message number like IDOC number updated in ECC table for the further refrence .so like wise SRM trying to communicate the same to ECC but it would have failed.
do you remeber when GOA idoc fails this table we will have reference number and reprocessing idoc.
like any reference of your input must register in one ECC table but there may have this table or some other reference table.
/SAPSRM/CL_CH_SOA_MAP_CTR_OUT CLASS DO SOME trick and see what is happening here
Muthu

Unable to create service central contract items

Hi Experts
We are in SRM 7 EHP 2 ECC 6 EHP 6
We are unable to create Central Contract with Service.
There is no "Outline" or "Service" on drop down from ADD LINE in Central Contract.
Please help urgently.
Thanks
Ajit

Hi Ajit,
Please check if hierarchy template HIER_SE is assigned to this contract transaction type in the following customizing.
spro -> SRM Server -> Cross-Application Basic Settings -> Service Procurement Activate Service Procurement
Also SM34: /SAPPSSRM/VC_HT -> Assign to Transaction Type
Best regards,
Wendy

Condition types from Central Contract not copied into Purchase Order

Hi,
When creating a central contract from SRM to ECC, all the condition types are copied well.
But when creating a shopping cart from SRM or a PO in ECC referencing the created central contract, the condtion types are not displayed in the conditions tab. (Only Condtion type PB00 is displayed.).
What can I do to assure, that all the condition types from the contract are displayed in the PO.
Do I have to do some customizing, or is there a SAP Notes to resolve this.
Regards,
Alexander

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Release of central contracts

In SRM a central contract was created and then distributed to SAP ERP ECC 6.0 Backend.
In backend system a release strategy exists for the distributed contract.
When trying to release this contract with ME35K the contract will not be found.
Checking the table EKKO the contract is there and the release strategy is correct.
Debugging transaction ME35K we found that the following statement deletes the distributed contract.
*- Check for EhP4-Switch and Central Contract
IF cl_ops_switch_check=>mm_sfws_p2pse( ) = 'X'.
DELETE xekko WHERE bstyp EQ 'K'
AND statu EQ 'K'.
The question is if there is a switch which needs to be activated or deactivated that the contract can be released by ME35K?
The switch should be: MM_SFWS_P2PSE
Or is it SAP standard that distributed central contracts cannot be released in ERP backend with ME35K?
Thanks in advance.

If you're reference the PO to a PR, than you can remove the assingment of the Contract document type to the PR document type, so the users wont be able to create the PO with reference to the Contract with the specific doc type.
SPRO->Materials ManagementPurchasingContract--Define Document Types --> Link purchase requisition - document type

Central contract and SA

hi,
for implementing Central contract in ERP-MM, the scenario is ,
Vendor corporate group(V0) having 2 local manufacturing units.
In system we have created two vendor codes V1 and V2.
central contract is created with corporate vendor (V0)
is it possible to create two different SA with Vendor code V1 and V2 with refernce to above contract.
i have tried with partner functions with parent vendor(V0),is it working. is there any
other solution for entering different vendor codes in SA?
regds
ram

it is working fine with partner functions.
still for Return delivery through quality inspection, partner functions are not working.
any idea for return delivery process
regds

Product categories Central contracts as SOS in SC

Hello,
We are implementing SRM 7 Level 9 with extended classic scenario.
We have created central contracts with items with Products categories only.
Those central contracts do not appear when the requester has selected the same product category in the shopping cart item.
We see no IMG activities for this. What can we do?
Thanks in advance.

Hi
I have set up several central contracts, each time with one contract item with one product category. It means we have only ONE criteria.
Contracts never appear in SC SOS tab.
It works well with classic scenario (I can grab all contracts I have in ECC against the product category).
Does ECS require more than one criteria to automatically assign the contract to SC item? Because we want to run ECS here.

SRM 7.0 Central Contracts Excel upload

Hello All,
We are implementing SRM7.0 implementing Central Contracts ,want to use the Contract upload function using the excel file , not able to see the button or link to do the same .
Am i missing something.
Pl. help.
Cheers,
Sid

Hello Jay,
I would like to import central contract to SRM 7.0 via excel file. When I click the import button after edit functionality and choose the file path from the computer and push the upload, button, I got an error message saying File type of specified file C:\Users\Administrator\Desktop\Contract.xls not supported . Therefore, the excel file cannot be imported to the SRM system. When I also try to import tablimited format of .txt files, I got same error message and unfortunately I cannot achieve central contracts to be imported. How can I solve this issue? Should I check some customizing settings or something?
Many thanks for your guidence,
Mehmet Gullu

Creating Central Contract using Reference Purchasing Org

Hi,
We are using two type of purchasing organization:
a.Global Purchasing Organization - It is not assigned to any company code or plant.
b.Country Purchasing organization u2013 It is assigned to Global Purchasing Organization. This cross-plant country specific purchasing organization is to procure materials for several plants independent to a company code. We have assigned the purchasing organization to the plant and not to a specific company code.
Global purchasing organization has been setup a reference purchasing organization to be able to create central contracts that is independent of company code and plant.
However whenever we create the central contract using the reference purchasing organization, the system will not proceed unless we define a company code. Please let me know how we can avoid the Pop up message u201CThe Purchasing organization XXXX has not been assigned to a company code. Please enter a company code.u201D
Please note that neither Global nor Country purchasing organization is assigned to company code. The company code will be determined only from Plant.
Please help.
Regards,
AG

Hi.
In your case, both the Purchase organizations ( Global Purchase Organization & Country Purchase Organization ) are not assigned to the company code. But Country Purchase Organization is assigned to the plants from the different company codes and Global Purchase Organization is not assigned to any plant also.
In this case, If you are creating central contract with the Global Purchase Organization , you will get error. Becuase Global Purchase Organization is not assigned to any company code or plant.
If you are creating central contract with the Country Purchase Organization, system will allow. Because this purchase organization is assigned to the plants from the different company codes. Based on this plant, system will identify company code.
So, conclusion is Purchase organization is must be assgined to the plants. This setting is mandatory in order to indentify company code which is giving in the Purchase document. But the assignment of company code to the purchase organization is optional.
So, assign plants to the Global Purchase Organization and try to create central contracts. It will work.
Regards
KRK

Distributing Central Contract from SRM to ECC

Hi,
We are using SRM 7.0 with ECC 6.0 in backend (no EHP). We're setting up a central contract with IDOCs. From what I read we have made the configuration:
in SRM:
- Assign attribute CT_PROC_TY = CCTR
- Connfigure new condition type PB00 which is the same with ECC price for contract
- activate the BADI BBP_DETERMINE_LOGSYS and coding it so for contract it will always go to backend (in method CONTRACT_LOGSYS_DETERMINE)
- I have activated BADI BBP_CTR_BE_CREATE but writing no code, as there no need for me to do mapping
in ECC:
- Activate inbound IDOC type BLAORD and COND_A and assign it to the logical system of SRM
Then I create the contract in SRM. but:
1. When creating contract, in item overview, i cannot tick 'distribution' indicator. Not sure what is the function
2. In item detail, tab distribution, I cannot put create release-purchasing org. Even when using search help it is not giving any value
Actually dont really understand the usefull of the indicator above, so I let it be empty, then I release the contract
The contract then not appear in ECC. I have checked SMQ1/SMQ2 nothing. Even in WE05 in ECC nothing. The only thing I see is in SLG1 where I see error triggered by user WF-BATCH with message "No recipient found"
Do i miss something in here? Any help will be very appreciated.
Josh

Hi Josh,
Central contract is only possible in SRM 7.0 with ECC 6.0 EHP 4. You can use local contracts or GOA.
Regards.

Central Contract

Similar Messages

Maybe you are looking for