Central & Di cental or Local SLD
Hi ,
Can anybody explain me or send me some docs about Central & Local SLD.
wht is the differance Proc & Cons.
if you can send me some Blog on how to do will be more helpfull.
thanks
RK
make this your reference - /people/boris.zarske/blog/2008/03/21/sld-general-recommendation-how-to-set-up-the-system-landscape-directory
Similar Messages
-
PI 7.1: Central vs. local SLD
We are in the process of setting up a PI 7.1. Our landscape has a central SLD (standalone on 7.00 without any other applications on it).
The PI installation guides recommends to use the local SLD that is synchronized with the central SLD instead of using the central SLD directly.
I remember from some time ago - where we tried to get a synchronization running - that is was not that "easy" and difficult to troubleshoot.
I'm not yet convinced to set up a separate SLD (or more than one for DEV, QA and PRD) instead of having one SLD in the landscape.
Are there any known implications (aside from the inability to use the CTC during setup) when we use an SLD of 7.00 together with a PI 7.1?
MarkusHolà Henrique,
gracias!
We don't use a "classical" cluster scenario but virtualized using Solaris zones (as failover cluster only, not with two nodes).
My question was more regarding functionality with scenarios - are the implications or any known no-go's for running a PI 7.1 against an SLD 7.00? If the SLD is "just" the storage for Technical and business systems and JCos for WD-Java, then it should work
Markus -
Migration of local SLD to Central SLD on different host.
Hello Experts,
We have migrate the local SLD existing on the SAP PI System to a new Central SLD on a different host on SAP Solution Manager system.
I followed the OSS Note 720717, which contains the description of the changes that have to be exectued in the SAP XI/PI Environment, during the SLD Migration. This note does not give any details of the description of changes for the other SAP Systems such as SAP ECC, BI etc registered in the SLD.
Can anyone provide the OSS Notes, SAP Doc URL or the steps on how to migrate the local SLD existing on SAP XI/PI System to the new Central SLD on the SAP Solution Manager system.
Thanks for help in advance.
Best Regards,
HaleemFirstly
I recommend to avoid having 1 SLD for multiple clients - like Solution Manager, BI, ECC
This is because clients may end up having conflicting requirements for the same SLD
- for example the small user group for Solution Manager may have a flexible and easy going policy on J2EE downtime
- but if you take down the Solution Manager J2EE that houses the SLD and PI uses this SLD - then you could have a severe affect on PI useage
Secondly
Although you can migrate content - this still does not guarantee the target landscape will work
- you may still need to manually re-implement target landscape configuration
let me give you an example
SLD 1 is being moved to SLD 2
Portal 1 is pointing to SLD 1
Even if you migrate the content of SLD 1 - including the ECC and Portal technical system landscape information
Portal 1 is still pointing to SLD 1 - this then needs to be manually re-pointed to SLD2
and that might not be all the complete steps either !
The complete steps of migration from the client side may not be available (I have found only steps to
migrate SLD content not migrate client use of the SLD)
- they may only be available as the documentation for the original configuration steps required to step SLD and the client
- therefore when migrating SLD you must go through the client setup documentation for SLD and check your
target landscape is consistent
Lastly - other considerations include
Lets say you also export model and CIM content from SLD 1 to SLD 2 - this means SLD 2 has an import line from SLD 1
- if you decomission SLD1 then you need to switch the import line which is not recommended - this could cause severe problems and may require you to create a new import line to upload content from SAP /swdc (which you need to keep the SLD bug free and latest definitions)
Just a few thoughts on issues you may encounter
Best wishes
Stuart -
Local SLD not updating a central SLD
Hi,
In my company landscape, I have
SolMan7.1 with Central SLD (Let's call this SLDA)
Portal 7.02 with local SLD (Let's call this SLDB)
ECC6
Both the Portal and ECC systems are updating SLDB, so I can see both technical systems in SLDB.
SolMan is updating SLDA, so I can see SolMan technical system in SLDA.
I linked SLDB to SLDA via
From SLDB> administration> data suppliers --> add SLDA
For this setting, I use the user SLDDSUSER, which have a role LcrInstanceWriterAll.
The problem now is SLDA does not get the data from SLDB. In SLDA, I see only the SolMan Technical System.
How often does SLDB update SLDA? Can we manually trigger an update SLDB->SDLA?
How can we troubleshoot the SLDB -> SLDA update?
What else needs to be configured other than "From SLDB> administration> data suppliers --> add SLDA" ?
Thanks
Edited by: Nick Foo on Sep 27, 2011 3:53 AMHi Sunny,
yes I have done those steps. Very short and easy setup steps to link to another SLD.
OK, just one thing to confirm here.
After Add SLD, the SLD URL syntax should be http://host:port correct?
I have tried all sorts of entires for the URL
http://host:port
http://host:port/sld
http://host:port/
All not working
Checked the user, user is ok, even tried giving the user Administrator role and still not working -
Switching from central SLD to local SLD
Hello,
i have installed BI Java with central sld.
Could I switch back from cetral sld to local sld?
I didn't find any documentation or posts.
Thanks,
SabrinaHi,
Yes you can change the SLD configuration from local to central or a vice versa...
Please check the following SAP Note for your reference
Note 720717 - Reduce the number of System Landscape Directories (SLD)
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/29b1f3ea-0c01-0010-2dae-cc64bb381c97
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e5e7cc9b-0501-0010-adb2-ffbe7f1f7e6f
Hope this helps,
Regards
CSM Reddy -
Hello All,
Is there limitation with central SLD over Local SLD?.
To deploy Webdynpro applications (Mobile) please let me know if there are any limitations
ThanksHello.
SLD architecture is a long discussion
There are different views on how to set up SLD's.
In my oppinion, the limitations of SLD is that it's a central component to a growing number of netweaver component.
Right now, the portal, webdynpro, xi, nwdi wouldn't work very well without the SLD.
Considering this there is aspects on how to set up the SLD's. Usually critical systems have a local SLD, with supplyer briges to central SLD's.
You would have a separate SLD landscape for Production servers, since they usually run on different SLA (service level agreements).
If you're using NWDI, it's usually a good place to have you're central SLD.
If you're running a smaller landscape, go for the local SLD only and don't complicate your landscape too much.
Check this document (about last slide) with different SLD scenarios. https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/204994f3-0e44-2a10-17b3-808fbd8db4aa
Regards, Mikael Löwgren -
Local sld pull from central sld
We are in the process of configuring a brand new sp19 solution manager server. We have a central sld on a dedicated server with several systems already registered on it I created a local sld on the new solution manager server. I want to pull the systems from this central sld server into the solution manager server, but cant' seem to find any documentation on how to do it.
I've read the SLD planning guide, the sld post-installation guide,, and the sld user guide. If there are any steps that document how to do this, I've missed them.
Can anybody help?
--CarlOn your central SLD: Administration -> Data Suppliers -> Add SLD...
Type in URL, valid user and pass and that should be it. It works this way on SLD based on NW70. -
Hi,
Can we still change Local SLD to Central SLD after the installation has been done?
Rgds,
Hapizorr Rozi AliasHello Rozi/Naveen,
Yes u can change the SLD configuration from central to local or a vice versa...
Please check the following SAP Note for u r ready reference
Note 720717 - Reduce the number of System Landscape Directories (SLD)
If usefull then give reward point..
Thanks -
Pointing to central SLD inplace of local SLD
Hi ,
I want to change point local SLD to central sld link in http://hostname:50000/rep/start/index.jsp.
Please advise me.
Regards,
Kirthi SHi ,
Thanks for replying.
As per the note am trying to change the Aii parameters to central SLD in xchange profile but xiprofile is throwing a error
http://10.232.255.56:50000/webdynpro/resources/sap.com/com.sap.xi.exprofui/XIProfileApp
dbconnect.prop: failed to load properties file
Please help me on this.
thanks
Kirthi -
Regarding Central SLD and Local SLD
Hello,
Can we maintain Central SLD as well as Local SLD?
We have maintain central sld during installation , now i want to maintain local sld also.
How can we do this? what is the benifit and disadvantage for maintaing both?
Regards,
V.SinghHi V.Singh
You can have as many SLD as you like - the service is available as part of a WAS JAVA install
Bear in mind the more SLD = the more administration and if you wish to sync them there is also many considerations
It is best you check the SLD planning guide at System Landscape Directory (SLD) to select the landscape that
best suits the intend use
The Central SLD concept is primarily to have an SLD containing all systems in your company i.e complete overview - this might not be specifically used for runtime of these systems - say PI useage etc - it might be used to populate Solution Manager with landscape data or just track all systems and changes in the organization
The central SLD concept is also not essential however an SLD (a local or app specific one) is essential for certain applications like PI, ESS etc
Best wishes
Stuart -
How to sync local SLDs to Central SLD.
Hi,
Suppose i have a central SLD system A. and several local SLD system B, C, D...
i want to sync all thoese local SLD information into the central SLD. But i don't know how to create data suppliers and corresponding configuration.
Who can give me some steps about how to do it.
Thanks,
Johnney.hi Johney..
Check this links..
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/29b1f3ea-0c01-0010-2dae-cc64bb381c97
http://help.sap.com/saphelp_nw04s/helpdata/en/44/7716e1633a12d1e10000000a422035/content.htm
http://www.informatik.uni-hamburg.de/SWT/attachments/LVTermine/TheJavaDevelopmentInfrastructure-Part2-AutomatedBuildandChangeManagement.pdf
URs GS -
Connecting local SLD to central SLD
Hi,
I have a system with its local SLD, I want this system to connect to Solman's SLD.
How is this possible?
Regards
KVRHi,
there are many considerations on SLD setup.
you will have to decide which is central SLD?
below document will give your clear idea abou integration
http://help.sap.com/saphelp_nwpi71/helpdata/en/46/2f42f114bc59bde10000000a155369/content.htm
Regards
Nagaraju
Edited by: welcomenag on Jan 22, 2010 5:17 PM -
Difference Between Central SLD & Local SLD
Hi All,
Q1) What is the Difference Between Central SLD & Local SLD.
Q2) Maintaining Individual SLD For DEV, QTY, PRD Servers is the Best One Or Maitaining the Single SLD is the Best One ????
Please Ans These Two Q's
Regards
Vamsi> 2. Maintaining individual SLD for DEV, QTY & PRD
> will be better approach. We follow this approach.
SAP recommends a Single SLD.
Having a separate SLD for every environment beats the concept of SLD itself. SLD is a place where you can look and understand what components/ system run in your landscape. If you are going to hve one for every Environment, it is against the concept of SLD itself. More maintenance is another issue.
Single SLD as recommended by SLD has the problem that you do not want to provide access to a component that can be used in production to developing teams and so on .What Barry has pointed is something that is a more practical approach.
There are no hard and fast rules. A client present across Geographies, havinng multiple vendors and IT teams handling different geographies would prefer to have multiple SLD's one for each Geography and then maybe a master SLD that is going to conain all info of the other Sld's and so on., There is no direct answer to this question other than it purely depends on individual clients.
Regards
Bhavesh -
Migrate local SLDs to a centralized SLD
We are in a big SAP project with one full landscape for each new SAP product (e.g. SRM, ECC, EP, BI, etc.)
We have a centralized SLD on a SM7.0.
We have 2 options when installing each system:
1) use the centralized SLD for each new install
2) use the local SLD for each new install, then change all local SLDs to the centralized SLD.
What will be the pros and cons of each option?
Thanks!Hello Linda,
Eventually ,you want to register your systems to the central SLD.
You can do it in both ways,but during installation when you select the option of Configure a Local SLD SAPinst says that it will take longer time ,thats it no other issues.
So best is that you register your systems to Cenral/Remote SLD.The remote SLD should be running and available at that time.
Have a look at this blog /people/boris.zarske/blog/2008/03/21/sld-general-recommendation-how-to-set-up-the-system-landscape-directory , it will give you more wider view of planning the SLD.
Regards
Ajay -
How to create a local SLD on a newly installed PI 7.3 system.
Hello
I wander how to create a local SLD on a newly installed PI 7.3 system.
When installing I choosed "register in existing central SLD"(other option was "no SLD destination")
On next screen I have choosen SLD HTTP host as the host I was currently installing PI7.3
For SLD HTTP port I have used 50000 as the instance was (the default) "00"
For SLD Data Supplier User I have choosen "SLDDSUSER"
I was warned then that "The SLD Server is not reachable. Choose "Cancell" to modify managing configuration or "OK" to continue. If you choose to continue you will have to execute the smdsetup script later on."
I opted "OK".
if I understand I have to execute smdsetup script in order to create a local SLD
Has anyone experience with it
thank you in advace
JanHi Jan,
You first need to run the wizard to setup the SLD locally.
To do this, go to the NetWeaver Administrator -> Configuration -> Scenarios -> Configuration Wizard -> Funtional Wizard Configuration UI
There tick System Landscape Directory and select "Enable Automatically".
After executing this, your SLD will be ready for use.
The SMD has nothing to do with the SLD, it's just the next step in the installation process.
Kind regards,
Mark
Maybe you are looking for
-
Flex 3 builder project setting with server on another box
I have a livecyle DS (or BlazeDS) server which is different from my workstation where I am writing flex codes using flex builder 3. When creating a new flex 3 project, I need to specify Root folder/Root URL/Context root in "Configure J2EE SErver" scr
-
ABAP Web Service client proxy - generation problems
Hi! I tried to create an ABAP web service client proxy for many different web services - for instance some of that listed at <a href="http://www.xmethods.net/">http://www.xmethods.net/</a> . Almost on 99% of the WSDLs the client proxy generation fail
-
I am upgrading my CM to v4.2 this month and looking to do a limited implemenation of some video. I have read the basics on VT Advantage solution and had some questions I can't seem to find the answers to: 1. Besides the obvious desktop software and h
-
Trying to do shop on behalf.
Hi SRM Guru's While iam trying to do shop on behalf of my manager iam not able to find my manager's name in that list. Please suggest what can i suppose to do if i have to find my manager name. please help me. Thanks & Regards kala
-
Windows API dll (user32.dll) cause fatal error
Hi, On a setup, we using a touch screen. The LabView Software is running on full screen. I need to deactivage my front panel if the screensaver is on to prevent user start anyting. I use SystemParametersInfoA from user32.dll and this is working good,