Central Manager device with Operation IP

The central Manager has IP address to the the server subnet - (customer server subnet)
May I have other IP address due to Opearion center. we will se
customer network..
regrads.
kimqv

A central manager is required to managed all of your accelerators properly / be in a supported configuration.
You don't necessarily need a physical appliance though. We do have a virtual form factor (vWAAS and vCM) that can run on a ESXi hypervisor.
vWAAS is the accelerator version and vCM is the manager version.
http://www.cisco.com/en/US/docs/app_ntwk_services/waas/waas/vwaas/guide/vwaasguide.html#wp69212

Similar Messages

WaaS Central Manager - device serial number report available?

Hi folks,
just wondering if anyone knows a quick/easy way to talk to the WAAS database to pull serial number information for all of my WAE's installed. i have 35 devices scattered around 7 states and I'm hoping for an easy way to collect serial number info.
I was hoping the platform report from the CM would do it, but it does not provide serial numbers of each chasis, only model and software version.
My thought is the CM probably has this data somewhere? I'm hoping to avoid having to manually telnet to 35 appliances and run the command 'show inventory' to find the appliance I am looking for.
anyone have a good shortcut?
also - anyone know what the database format is? mysql? postgres?

The best way to collect serial # remotely from a WAAS device (WAE) is by executing 'show hardware'. You may write a script to get it.
CM don't provide this info currently.
Can you please unicast me at '[email protected]' so that I will be able to understand your requirements.
thanks
Nat

Managing devices with a Mac

I am using Mac OSX 10.9 as my operating system for just about everything. But I am having a heck of time getting TFTP to work. I tried the TFTP server guy that seems to be popular however I can't get that to work. I have even emailed the developer.
I know it has to be possible. What do other Mac users out there use?
Thanks

Try this post:
http://tekcert.com/blog/2012/06/29/turn-your-mac-tftp-server
HTH

Zenworks 7 Linux Management Device Registration Issue

All,
Below is a detailed description of a resistration issue using Zenworks
Linux Management 7.
Hardware Configuration:
1- DSL Modem (Westell Model 2200)
1- DI 614+ 2.4 GHz Broadband Wireless Router (includes 4-5 ethernet
ports) with a IP address of 192.168.0.1
1- PC Server running Redhat SUSE Linux Enterprise Server 9 (has a static
IP address of 192.168.0.103). This machine is running the Zenworks 7
Linux Management Software and is able to sucessfully launch the Zenworks
7 Control Panel.
1- Redhat Linux Enterprise Server 3 on a completely different network
with a static IP address (207.44.142.56). This machine is running the
Zenworks Linux Management Agent install using the ./zlm-install -a
command.
Network Configuration:
The broadband DSL modem is connected directly to the WAN ethernet port on
the wireless router
The primary PC server running Redhat SUSE Linux Enterprise Server 9 has a
direct connection to one of the ethernet ports on the wireless broadboard
router with a private static IP address of 192.168.0.103 and has a public
IP of 70.22.107.168.
The DSL modem is has a direct connection to the telephone line.
The Redhat Linux Enterprise Server 3 is on a completely different network
with a IP of 207.44.142.56.
No firewalls are configured on the primary server and the wireless router
Port Forwarders are configured on the broadband wireless router as
follows:
zlm1
192.168.0.103
TCP 80/80
always
zlm2
192.168.0.103
TCP 443/443
always
zlm3
192.168.0.103
TCP 524/524
always
zlm4
192.168.0.103
TCP 1299/1299
always
zlm5
192.168.0.103
TCP 2544/2544
always
zlm6
192.168.0.103
TCP 5506/5506
always
zlm7
192.168.0.103
TCP 10389/10389
always
zlm8
192.168.0.103
TCP 10636/10636
always
Goal:
To successfully register the Redhat Linux Enterprise 3 server (i.e. the
managed device with IP 207.44.142.56) with the primary server
(192.168.0.103 SUSE Redhat Enterprise Server 9 machine) so it can be
viewed and managed from the Zenworks 7 Control panel.
Nature of Problem:
When attempting to register the managed device (207.44.142.56) with the
primary server (192.168.0.103) which resides inside of my Wireless Local
Area Network (WLAN) via the following command, it appears to fail. I'm
unable to view or configure this managed device inside of the Zenworks 7
Linux Management Control Panel. The following are 2 manual approaches
that I take to register the managed device and the results for each.
Register using private IP approach:
/opt/novell/zenworks/bin/rug sa https://192.168.0.103
Results: ERROR: Could not add 'https://192.168.0.103': Download failed:
(https://192.168.0.103/zenworks-registration/service.xml) Error:
ConnectFailure
Register using public IP approach:
/opt/novell/zenworks/bin/rug sa https://70.22.107.168
Results: ERROR: Could not add 'https://70.22.107.168': Download failed:
(https://70.22.107.168/zenworks-registration/service.xml) Error:
ConnectFailure
Regards,
Darrick Addison
Sr. Software Engineer/Consultant
ASC Technologies, LLC
Ph: 443.257.9116
Fax: 410.360.5570
E-mail: [email protected]
Web: www.asctllc.com

On Tue, 08 Nov 2005 02:37:16 GMT, [email protected] wrote:
> Below is a detailed description of a resistration issue using Zenworks
> Linux Management 7.
duplicate question - can I gently mention a point? Whilst we naturally
understand that you may need information/help in a hurry, asking the
same question in multiple forums dilutes the answers you get, and makes
more work for those of us who have to read them; it would help if you
could avoid this in future.
Many thanks
(c) Shaun Pond, stolen without permission ;-)
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

Zenworks Linux Management Device Registration Issue

All,
Below is a detailed description of a resistration issue using Zenworks
Linux Management 7.
Hardware Configuration:
1- DSL Modem (Westell Model 2200)
1- DI 614+ 2.4 GHz Broadband Wireless Router (includes 4-5 ethernet
ports) with a IP address of 192.168.0.1
1- PC Server running Redhat SUSE Linux Enterprise Server 9 (has a static
IP address of 192.168.0.103). This machine is running the Zenworks 7
Linux Management Software and is able to sucessfully launch the Zenworks
7 Control Panel.
1- Redhat Linux Enterprise Server 3 on a completely different network
with a static IP address (207.44.142.56). This machine is running the
Zenworks Linux Management Agent install using the ./zlm-install -a
command.
Network Configuration:
The broadband DSL modem is connected directly to the WAN ethernet port on
the wireless router
The primary PC server running Redhat SUSE Linux Enterprise Server 9 has a
direct connection to one of the ethernet ports on the wireless broadboard
router with a private static IP address of 192.168.0.103 and has a public
IP of 70.22.107.168.
The DSL modem is has a direct connection to the telephone line.
The Redhat Linux Enterprise Server 3 is on a completely different network
with a IP of 207.44.142.56.
No firewalls are configured on the primary server and the wireless router
Port Forwarders are configured on the broadband wireless router as
follows:
zlm1
192.168.0.103
TCP 80/80
always
zlm2
192.168.0.103
TCP 443/443
always
zlm3
192.168.0.103
TCP 524/524
always
zlm4
192.168.0.103
TCP 1299/1299
always
zlm5
192.168.0.103
TCP 2544/2544
always
zlm6
192.168.0.103
TCP 5506/5506
always
zlm7
192.168.0.103
TCP 10389/10389
always
zlm8
192.168.0.103
TCP 10636/10636
always
Goal:
To successfully register the Redhat Linux Enterprise 3 server (i.e. the
managed device with IP 207.44.142.56) with the primary server
(192.168.0.103 SUSE Redhat Enterprise Server 9 machine) so it can be
viewed and managed from the Zenworks 7 Control panel.
Nature of Problem:
When attempting to register the managed device (207.44.142.56) with the
primary server (192.168.0.103) which resides inside of my Wireless Local
Area Network (WLAN) via the following command, it appears to fail. I'm
unable to view or configure this managed device inside of the Zenworks 7
Linux Management Control Panel. The following are 2 manual approaches
that I take to register the managed device and the results for each.
Register using private IP approach:
/opt/novell/zenworks/bin/rug sa https://192.168.0.103
Results: ERROR: Could not add 'https://192.168.0.103': Download failed:
(https://192.168.0.103/zenworks-registration/service.xml) Error:
ConnectFailure
Register using public IP approach:
/opt/novell/zenworks/bin/rug sa https://70.22.107.168
Results: ERROR: Could not add 'https://70.22.107.168': Download failed:
(https://70.22.107.168/zenworks-registration/service.xml) Error:
ConnectFailure
Regards,
Darrick Addison
Sr. Software Engineer/Consultant
ASC Technologies, LLC
Ph: 443.257.9116
Fax: 410.360.5570
E-mail: [email protected]
Web: www.asctllc.com

On Tue, 08 Nov 2005 02:40:58 GMT, [email protected] wrote:
> Below is a detailed description of a resistration issue using Zenworks
> Linux Management 7.
duplicate question - can I gently mention a point? Whilst we naturally
understand that you may need information/help in a hurry, asking the
same question in multiple forums dilutes the answers you get, and makes
more work for those of us who have to read them; it would help if you
could avoid this in future.
Many thanks
(c) Shaun Pond, stolen without permission ;-)
Marcus Breiden
Please change -- to - to mail me.
The content of this mail is my private and personal opinion.
http://www.edu-magic.net

WAAS Express devices went offline in Central manager

Hi all,
after a long time i have a new issue in our WAAS environment.
We're running several WAAS Express devices.
And a few weeks ago i integrated them into our WAAS Central Manager.
The registration of WAAS Express device was done on basis of "waasx_deployment_guide_120910.pdf"
Now when i came back from christmas holiday i detected that all of them became offline again in CM.
Activating as well as replacing did not work, cause the router detected that the device is still registered.
i got the following output after this:
Jan 10 15:30:37: %WAAS-3-WAAS_CM_REGISTER_FAILED: IOS-WAAS registration with Central Manager failed for the following reason: Registration r
ecord for this device already exists or other devices share certificate or mac address or ip address with this device. Failed to process reg
istration request initiated from 10.11.176.1
Jan 10 15:30:37: %WAAS-3-WAAS_CM_REGISTER_FAILED: IOS-WAAS registration with Central Manager failed for the following reason: Registration r
ecord for this device already exists or other devices share certificate or mac address or ip address with this device. Failed to process reg
istration request initiated from 10.11.176.1
Now to my questions:
How can i set the WAASxpress router to Status active again on CM?
What could be the reason why the WAAS express device became offline?
thanks for your feedback in advance
Dieter

Hi Dieter,
i am just curious to know what made the WAAS express go offline. Even if you open a TAC case, TAC is going to ask this question.
1. Was there any IOS upgrade performed on routers?
2. Was the routers reloaded for any reason?
3. If you are using AAA / TACACS, any changes like upgrade / renewal of certificates on them?
This information will help you narrow down the problem quickly. If you can share above information, we might be able to move something for you.
Regards.

What is the best way to manage multiple devices with one iMac - different users with seperate itunes accounts or one mac user with different itune logons and libraries?

Hello
I have just purchased an imac which I am very happy with. In our household we also have two iphones (one mine and one husbands) and one ipod (my sons). We all have individual itunes accounts set up on our previous computer (not a mac). We have sepereate apps and music, although there may be the odd occasion where we would like to share a song (if this is possible) across devices.
I am just wondering the best way to manage these devices using the new imac. Should I create individual accounts to logon to the imac, then from within these launch our own itunes accounts and sync our devices with these. Or should I be using one version of itunes, logging on to this with our different itunes usernames and storing things in libraries.
Any help would be greatly appreciated.
Thanks

I am presuming that we cannot share downloaded apps and music between accounts because of the copyright issue,
Though I'm no copyright lawyer, as long as it's within a household, you can share content among users. Such sharing is, absent specific language preventing it not present in the iTunes Store terms of use, generally considered to be "personal use". So you can share apps and music amongst your users on your computer and with their devices. You just can't give any of that content to friends or relatives who don't live with you.
What I am not clear on, it making sure that this appears in each itunes account - is it easy to find the file storage folders that match the itunes accounts and what would these be?
The iTunes library and files are by default in a user's Home/Music folder. But you don't have to find the folder; in fact putting a file into the folder yourself won't add the file to iTunes. Just drag the file into the iTunes window. iTunes will copy it to the correct location.
Regards.

How do i manage multiple users and devices with one apple id without everything showing up on every device?

how do i manage multiple users and devices with one apple id without everything showing up on every device?

How to use multiple iPhone, iPad, or iPod devices with one computer

I am signed in itunes with me apple id and my iphone /ipad is in the same id but when i go in manage devices its only showing my iphone?

I am signed into itunes with my id and my iphone / ipad are also on this id but when i go in to manage devices its only showing the iphone. Also just up dated my ipad now its saying not charging when its hooked up to the computer?

If the problem persists, you'll probably have to make another apple id, it wont take off any games or music or apps or anything you've bought it will all stay there, i have two apple id's and i don't have a problem with anything.

HT204074 I have been reading about how to associate devices with my Apple ID, and the info says I can go to my account through iTunes to find "Manage Devices" but that does not exist. Either it was phased out our there are other ways to get there, but can

I am trying to find out about all my associated devices. I recently got a message that I had used my last device, and am not sure how this can be. The instructions for accessing the info via the iTunes account info page apparently were not shared with the programmers since there is no Manage Devices button or option as far as I can see. How do I do this?

After hours and hours of failed searches, I must have used a different keyword in my Google search, and here is the website that I was looking for:
https://supportprofile.apple.com
And here is the guy whose website I found that helped me solve my problem:
http://www.marcomc.com/2011/01/how-to-find-the-list-of-my-apple-registered-produ cts/
I was going to rant here about how badly Apple designed their "Apple Id" stuff, how they strongly distinguish between using your Apple Id at the online Apple Store vs. using it at the App Store (which you have to get to via iTunes ... quite ridiculous) ... but I won't. :-)
Anyway, I hope that the two previously mentioned websites will be of help to others.

Identifying the Remote Operator on the Managed Device

I just have one question regarding Remote Management. Since we are using an external VeriSign certificate, the remote operator is currently identified as "unknown user" when a managed device is remote controlled. I think this is working as designed because the Remote Operator's name is derived from the certificate generated on the ZCM server. When External CAs are used (i.e. VeriSign), certificates are not generated for the remote operator, therefore the operator is recorded as an "Unknown User". Am I correct ?
I read the following in the ZCM documentation:
B.3 Identifying the Remote Operator on the Managed Device
When a remote operator launches a remote session on a managed device through ZENworks Control Center, a certificate that helps the managed device to identify the remote operator is automatically generated by ZENworks if an internal CA is used. However, if an external CA is used, the remote operator needs to manually provide the certificate that is chained to the deployed external CA and is certified for SSL Client Authentication. For more information on using the external CA, see Use the Following Key Pair for Identification in Section 2.8, Starting Remote Management Operations. Novell Documentation
If a remote operator launches a remote operation on a managed device without providing a certificate, the name of the remote operator is recorded as An Unknown User in the audit logs, the Visible Signal and the Ask User Permission dialog box. To ensure that the remote operator provides the certificate, deselect Allow Connection When Remote Management Console Does Not Have SSL Certificate in the Remote Management policy.
Do you know how the required key pair for identification is generated ? What are the steps ? We need for the remote operator to be identified.

rguerra,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

HT4847 Why do I get the answer on trying to open this application, limit reached,want to use skygo on this device visit manage devices to replace a registered device with this one. How do I do that

Why do I get the answer on trying to open the application skygo, limit reached, want to use skygo on this device visit manage devices to replace a registered device with this one. How do I do that. ?

Please see http://help.sky.com/tv/sky-go/register-devices-on-sky-go . Note that if you have in the past already removed one device you will have to wait for a month to elapse before you can remove another.

Javax.management.ReflectionException: The operation with name getMBeanInfo

Hi,
I am getting expcetion while restarting the service deployed as ear under user instance in oc4j application server 10.1.3. Deployment of EAR is succussfully completed.
It throws exception while restarting that service.
Logs after deployment(under j2ee/instance_name/logs):
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID><IP-ADDRESS of appserver>:22260:1292737388443:58</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Application Deployer for <EAR file name>COMPLETES. Operation time: 394 msecs</MSG_TEXT>
</PAYLOAD>
Logs after restart of serverice(under j2ee/instance_name/logs):
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID><IP ADDRESS OF APPSERVER>:22260:1292737432393:69</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Exception returned by remote server: {0}</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[java.lang.IllegalStateException: ClassLoader "<EAR DEPLOYED NAME>.root:0.0.0" (from <application> in /oracle/apphome/j2ee/<instance_name>/applications/<EAR DEPLOYED NAME>/): This loader has been closed and should not be in use.
at oracle.classloader.util.ClassLoadAsserts.fail(ClassLoadAsserts.java:154)
at oracle.classloader.PolicyClassLoader.checkState(PolicyClassLoader.java:1994)
at oracle.classloader.PolicyClassLoader.internalLoadClass(PolicyClassLoader.java:1659)
at oracle.classloader.PolicyClassLoader.loadClass(PolicyClassLoader.java:1635)
at java.lang.ClassLoader.loadClass(ClassLoader.java:587)
at java.lang.ClassLoader.loadClass(ClassLoader.java:561)
at java.lang.Class.forNameImpl(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.evermind.io.ClassLoaderObjectInputStream.resolveClass(ClassLoaderObjectInputStream.java:33)
at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1553)
at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1475)
at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1708)
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1314)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:354)
at com.evermind.server.rmi.RMIClientConnection.handleListContextResponse(RMIClientConnection.java:805)
at com.evermind.server.rmi.RMIClientConnection.handleOrmiCommandResponse(RMIClientConnection.java:279)
at com.evermind.server.rmi.RMIClientConnection.dispatchResponse(RMIClientConnection.java:242)
at com.evermind.server.rmi.RMIClientConnection.processReceivedCommand(RMIClientConnection.java:224)
at com.evermind.server.rmi.RMIConnection.handleCommand(RMIConnection.java:152)
at com.evermind.server.rmi.RMIConnection.listenForOrmiCommands(RMIConnection.java:127)
at com.evermind.server.rmi.RMIConnection.run(RMIConnection.java:107)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:298)
at java.lang.Thread.run(Thread.java:797)
]]></SUPPL_DETAIL>
</PAYLOAD>
</MESSAGE>
<MESSAGE>
Logs from (j2ee/home/logs) after restart of service:
<CORRELATION_DATA>
<EXEC_CONTEXT_ID><UNIQUE_ID><IP-ADDRESS OF APPSERVER>:96566:1292737132784:12</UNIQUE_ID><SEQ>0</SEQ></EXEC_CONTEXT_ID>
</CORRELATION_DATA>
<PAYLOAD>
<MSG_TEXT>Exception returned by remote server: {0}</MSG_TEXT>
<SUPPL_DETAIL><![CDATA[javax.management.ReflectionException: The operation with name getMBeanInfo could not be found
at oracle.oc4j.admin.jmx.ejb.MBeanServerEjbBean.invoke(MBeanServerEjbBean.java:371)
at sun.reflect.GeneratedMethodAccessor12.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:615)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxSupportsInterceptor.invoke(TxSupportsInterceptor.java:37)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SecurityRoleInterceptor.invoke(SecurityRoleInterceptor.java:47)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatefulSessionEJBObject.OC4J_invokeMethod(StatefulSessionEJBObject.java:844)
at MBeanServerEjb_RemoteProxy_1me2j7.invoke(Unknown Source)
at sun.reflect.GeneratedMethodAccessor11.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:615)
at com.evermind.server.rmi.RmiMethodCall.run(RmiMethodCall.java:53)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:797)
Caused by: java.lang.NoSuchMethodException: getMBeanInfo
at com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:412)
at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:238)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:833)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:802)
at oracle.oc4j.admin.jmx.server.state.ApplicationStateFilterMBeanServer.invoke(ApplicationStateFilterMBeanServer.java:572)
at oracle.oc4j.admin.jmx.ejb.MBeanServerEjbBean.invoke(MBeanServerEjbBean.java:365)
... 22 more
]]></SUPPL_DETAIL>
</PAYLOAD>
Kindly suggest solution for above.

Dear svsleave,
I have the same problems,which means I have the similar error exceptions, when I try to run my JSP. Can you please teach me how to solve it in details?! I will like to know how to [decrease rdbms SGA size and oc4j memory] . Thank you for your help!

Anti Virus with centralized management console

They do provide a 30 day free trial....
http://www.kaspersky.com/business-security/endpoint-select

Galaxy_Man wrote:
You can have a look at Kaspersky Business Select package; it comes with the Kaspersky Security Center for centralized management; we have been using it for a while now and so far it's worked well for us.There are so many type. which one are you using right now??
Kaspersky Endpoint Security for Business | Select
Kaspersky Security Center (including MDM)
Kaspersky Security Center (including MDM)
Kaspersky Endpoint Security for Windows
Kaspersky Endpoint Security for Linux
Kaspersky Endpoint Security for Mac
Kaspersky Anti-Virus for Linux File Server
Kaspersky Anti-Virus for Windows Servers Enterprise Edition

Issue With Business Objects Installation-STW00213 The Central Management Server has failed to start.

Hi,
I am in the process of installing Business Objects XI 3.1 in one of our server. While installing I am getting the error 'The Central Management Server has failed to start. Press 'retry' to attempt to start it again or 'cancel' to skip any actions dependendent on the Central Management Server. STW00213.'
I have tried re-installing the BO, and also tried installing without giving admin password. But it doesn't work. And also I ahve tried giving the passwords of database and CMS Admin without Sepcia Characters. But it also doesn't work.
If I cancel and install the BO, Server Intelligence Agent is not available in Central Management Server.
Could anyone help on this issue?
Thanks
Prakadesh

Hi Prakadesh,
Try these steps.
1. Stop and disable the service of current SIA. You can do it from start-->run services.msc. Double click the SIA service and change the status to disable.
2. Login into sqlplus and drop all the CMS tables.
3. Create a new SIA pointing to Oracle from the CCM.
4. Start the new SIA and check if all services come up and you are able to login into Manager servers.
If this does not work, check the event viewer for error messages.
Regards
Chinmaya

Central Manager device with Operation IP

Similar Messages

Maybe you are looking for