Central Monitoring and System Monitoring Setup Guide

Hi,
I need to configure solution manager central monitoring and system monitoring, please advise where i can find the sap document regarding central monitoring and system monitoring for netweaver 7.0.
Thank You and Best Regards
Fernand Lesmana

Hi
please check below link
http://help.sap.com/saphelp_sm40/helpdata/en/0b/160419162a476380b5608e7f27a742/content.htm
regards,
Srinu

Similar Messages

  • What is difference between BP monitor and supplier monitor?

    hi friends
    what is difference between BP monitor and Supplier Monitor
    what is tcode for BPmonitor
    Regards
    Vinny

    Hi Vinny,
    Please refer to the following links. These seems useful:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f051efda-bc58-2910-3785-e60d1f798c96
    The specified item was not found.
    New Business Process Monitoring functionalities in SAP Solution Manager – ALE / IDoc Monitoring
    Regards,
    Saumya

  • Source monitor and program monitor boxes will not display video in full only half

    I have adobe premiere pro cs6 and source monitor and program monitor boxes will not display video in full only half.  So the top half of both monitors are black and the bottom half is where the video displays.  But you can see that the video is missing the top part.  Like people's heads are cut off and can only see body.  How can i fix this so premiere pro cs6 will use the full monitors boxes to display my video?

    This is a known issue with a recent Windows update.
    The Fix (post 3):
    http://forums.adobe.com/message/5494175#5494175
    The Status Update (posts 46 / 52):
    http://forums.adobe.com/message/5555797#5555797

  • Diagnostic Pack and System monitoring plug-in for host.

    Is it correct to say that the ´Operating System Monitoring´ feature of the Oracle DB Diagnostic Pack discards the need of installing a System Monitoring Plug-in for Host in those servers where I have both Oracle DB and Diagnostic Pack for Oracle DB already installed?

    On <http://www.oracle.com/us/corporate/pricing/price-lists/index.html> in the technology pricelist
    check for "System Monitoring Plug-in for Non Oracle Databases"

  • System Monitoring and CCMS Monitors

    In our production environment we have working CCMS Monitors set up thru RZ20.
    However if I go to solution_manager->system monitoring->operations tab, there are no alerts displayed on the page. Does system monitoring use the same backend as CCMS Monitoring? I am a little bit confused on this. If we set up System Monitoring, will this duplicate the CCMS Monitors we've previously set up?

    If you want to see alerts on Operation tab in solution_manager->Solution Monitoring->System Monitoring you first need to run "Setup System Monitoring" (link is just below tab Operation or run in from Operations Setup tab). Setup will not duplicate CCMS monitors. It will just mark which of the available alerts should be taken into account for solution_manager->Solution Monitoring->System Monitoring report.
    This might help you to start:
    http://help.sap.com/saphelp_smehp1/helpdata/en/5b/0c9ccfd262427685c245d7ea85cd7a/content.htm

  • Error "Could Not intialize" with IE8 and System Monitoring in DSWP

    Dear All,
    Having upgraded to IE8, I am getting "Could Not Initialize" error when executing System Monitoring through TCode DSWP in Solution_Manager.Please kindly assist.
    Thank you.
    Regards,
    John

    Hello John,
    IE8 requires SAPGUI 720, so you may want to ensure yor SAPGUI ersion is at this level.
    Regards,
    Paul

  • Source monitor and programm monitor stopped displaying anything

    Hey there,
    I'm a CS6 Production Premium user and in severe trouble here: I'm working on a big 1080p AVC-Intra50 project for a client that is due next monday. I'm close to completion, but a couple of days ago, the source monitor stopped displaying video. It would show a still as I loaded in a clip, but as soon as I played back, the source monitor simply went black. The clip was playing though and audio can be heard. Not that big a problem, I thought, and simply used the program monitor for playback. But yesterday, the same thing happened to the program monitor as well. But not just that: Even the stills are gone now. Both monitors remain black at all times, even though playback and sound still work. So I got curious and tried different materials and different projects: AVCHD, DNxHD, even JPEGS, nothing shows on either monitors, regardless of the resolution. Still, everything works just fine on my laptop.
    So I completely uninstalled the entire Creative Suite, used the Clean Script multiple times, including reboots, deleted all remaining files from user and windows directories and updated all my hardware to the latest drivers. Nothing. Both monitors remain black and useless. I didn't change anything to my Adobe setup, nor my hardware or software configuration while this error occured. I searched the web for hours and I'm completely at my wits' end. Any suggestions?
    My system:
    Windows 7 x64
    Intel Core i7 2600k
    8 GB RAM
    ATi 6870

    I did purge the entire cache and database. Didn't help.
    EDIT: I'm sorry, I only purged the database. Now, that I deleted all cached media files manually, the programm monitors is working again, but the source monitor is still out.
    EDIT 2: Okay, now stuff is getting really weird: So the program monitor was working again. I continued editing for a bit, then put the program monitor into full screen and it went black again. Even when I went back to the normal size, it remains black, BUT, now the source monitor was working again. So I put the source monitor intro full screen and it went black again and both monitors stayed black.
    So after deleting the media cache, I had the program monitor working again. After full screen use, it went balck, but the source monitor was working. After full screen use on the source monitor, both monitors are black again. What is going on?!

  • Cisco Devices Syslog monitoring and user monitoring tools

    Can anyone help me how to monitoring syslog and users log (which command use specific user). if any software or hardware need for this purpose we will purchace it. note that our network running all cisco devices (router, switch, ASA etc) and more then 200 devices are in our network.
    thanks.

    Configuring Cisco Devices to Use a Syslog Server
    Most Cisco devices use the syslog protocol to manage system logs and  alerts. But unlike their PC and server counterparts, Cisco devices lack  large internal storage space for storing these logs. To overcome this  limitation, Cisco devices offer the following two options:
    Internal buffer— The device's operating system  allocates a small part of memory buffers to log the most recent  messages. The buffer size is limited to few kilobytes. This option is  enabled by default. However, when the device reboots, these syslog  messages are lost.
    Syslog— Use a UNIX-style SYSLOG protocol to send  messages to an external device for storing. The storage size does not  depend on the router's resources and is limited only by the available  disk space on the external syslog server. This option is not enabled by  default.
    TIP
    Before configuring a Cisco device to send syslog messages, make  sure that it is configured with the right date, time, and time zone.  Syslog data would be useless for troubleshooting if it shows the wrong  date and time. You should configure all network devices to use NTP.  Using NTP ensures a correct and synchronized system clock on all devices  within the network. Setting the devices with the accurate time is  helpful for event correlation.
    To enable syslog functionality in a Cisco network, you must configure the built-in syslog client within the Cisco devices.
    Cisco devices use a severity level of warnings through emergencies to  generate error messages about software or hardware malfunctions. The  debugging level displays the output of debug commands. The Notice level  displays interface up or down transitions and system restart messages.  The informational level reloads requests and low-process stack messages.
    Configuring Cisco Routers for Syslog
    To configure a Cisco IOS-based router for sending syslog messages to  an external syslog server, follow the steps in Table 4-11 using  privileged EXEC mode.
    Table 4-11. Configuring Cisco Routers for Syslog
    Step
    Command
    Purpose
    1
    Router# configure terminal
    Enters global configuration mode.
    2
    Router(config)# service timestamps type datetime [msec] [localtime] [show-timezone]
    Instructs the system to timestamp syslog messages; the options for the type keyword are debug and log.
    3
    Router(config)#logging host
    Specifies the syslog server by IP address or host name; you can specify multiple servers.
    4
    Router(config)# logging trap level
    Specifies the kind of messages, by severity level, to be  sent to the syslog server. The default is informational and lower. The  possible values for level are as follows:
    Emergency: 0
    Alert: 1
    Critical: 2
    Error: 3
    Warning: 4
    Notice: 5
    Informational: 6
    Debug: 7
    Use the debug level with caution, because it can generate a large amount of syslog traffic in a busy network.
    5
    Router(config)# logging facility facility-type
    Specifies the facility level used by the syslog messages; the default is local7. Possible values are local0, local1, local2, local3, local4, local5, local6, and local7.
    6
    Router(config)# End
    Returns to privileged EXEC mode.
    7
    Router# show logging
    Displays logging configuration.
    Note
    When a level is specified in the logging trap level command, the router is configured to send messages with lower severity levels as well. For example, the logging trap warning command configures the router to send all messages with the  severity warning, error, critical, and emergency. Similarly, the logging trap debug command causes the router to send all messages to  the syslog server. Exercise caution while enabling the debug level.  Because the debug process is assigned a high CPU priority, using it in a  busy network can cause the router to crash.
    Example 4-12 prepares a Cisco router to send syslog messages at  facility local3. Also, the router will only send messages with a  severity of warning or higher. The syslog server is on a machine with an  IP address of 192.168.0.30.
    Example 4-12. Router Configuration for Syslog
    Router-Dallas#
    Router-Dallas#config terminal
    Enter configuration commands, one per line. End with CNTL/Z.
    Router-Dallas(config)#logging 192.168.0.30
    Router-Dallas(config)#service timestamps debug datetime localtime show-timezone
       msec
    Router-Dallas(config)#service timestamps log datetime localtime show-timezone msec
    Router-Dallas(config)#logging facility local3
    Router-Dallas(config)#logging trap warning
    Router-Dallas(config)#end
    Router-Dallas#show logging
    Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
        Console logging: level debugging, 79 messages logged
        Monitor logging: level debugging, 0 messages logged
        Buffer logging: disabled
        Trap logging: level warnings, 80 message lines logged
            Logging to 192.168.0.30, 57 message lines logged
    Configuring a Cisco Switch for Syslog
    To configure a Cisco CatOS-based switch for sending syslog messages  to an external syslog server, use the privileged EXEC mode commands  shown in Table 4-12.
    Table 4-12. Configuring a Cisco Switch for Syslog
    Step
    Command
    Purpose
    1
    Switch>(enable) set logging timestamp {enable | disable}
    Configures the system to timestamp messages.
    2
    Switch>(enable) set logging server ip-address
    Specifies the IP address of the syslog server; a maximum of three servers can be specified.
    3
    Switch>(enable) set logging server severity server_severity_level
    Limits messages that are logged to the syslog servers by severity level.
    4
    Switch>(enable) set logging server facility server_facility_parameter
    Specifies the facility level that would be used in the message. The default is local7.  Apart from the standard facility names listed in Table 4-1, Cisco  Catalyst switches use facility names that are specific to the switch.  The following facility levels generate syslog messages with fixed  severity levels:
    5: System, Dynamic-Trunking-Protocol, Port-Aggregation-Protocol, Management, Multilayer Switching
    4: CDP, UDLD
    2: Other facilities
    5
    Switch>(enable) set logging server enable
    Enables the switch to send syslog messages to the syslog servers.
    6
    Switch>(enable) Show logging
    Displays the logging configuration.
    Example 4-13 prepares a CatOS-based switch to send syslog messages at  facility local4. Also, the switch will only send messages with a  severity of warning or higher. The syslog server is on a machine with an  IP address of 192.168.0.30.
    Example 4-13. CatOS-Based Switch Configuration for Syslog
    Console> (enable) set logging timestamp enable
    System logging messages timestamp will be enabled.
    Console> (enable) set logging server 192.168.0.30
    192.168.0.30 added to System logging server table.
    Console> (enable) set logging server facility local4
    System logging server facility set to
    Console> (enable) set logging server severity 4
    System logging server severity set to <4>
    Console> (enable) set logging server enable
    System logging messages will be sent to the configured syslog servers.
    Console> (enable) show logging
    Logging buffered size: 500
    timestamp option: enabled
    Logging history size: 1
    Logging console: enabled
    Logging server: enabled
    {192.168.0.30}
    server facility: LOCAL4
    server severity: warnings(4
    Current Logging Session: enabled
    Facility            Default Severity          Current Session Severity
    cdp                 3                         4
    drip                2                         4
    dtp                 5                         4
    dvlan               2                         4
    earl                2                         4
    fddi                2                         4
    filesys             2                         4
    gvrp                2                         4
    ip                  2                         4
    kernel              2                         4
    mcast               2                         4
    mgmt                5                         4
    mls                 5                         4
    pagp                5                         4
    protfilt            2                         4
    pruning             2                         4
    radius              2                         4
    security            2                         4
    snmp                2                         4
    spantree            2                         4
    sys                 5                         4
    tac                 2                         4
    tcp                 2                         4
    telnet              2                         4
    tftp                2                         4
    udld                4                         4
    vmps                2                         4
    vtp                 2                         4
    0(emergencies)        1(alerts)              2(critical)
    3(errors)             4(warnings)            5(notifications)
    6(information)        7(debugging)
    Console> (enable)
    Configuring a Cisco ASA for Syslog >
    http://www.cisco.com/en/US/docs/security/asa/asa82/configuration/guide/monitor_syslog.html
    You can get a free copy of Syslog server from here
    http://www.kiwisyslog.com/free-edition.aspx
    Hope it helps!!
    Regards

  • Source Monitor and Program Monitor not playing back video

    The last time I used Premiere Pro CC was Oct 8 and the program worked fine. As of today, I reopened the project file and the source and program monitors are displaying nothing respectively. However, the audio playback for both are unaffected. I've tried making a completely new project with different video and I get the same error. I've restarted Premiere, restarted the computer, and reinstalled Premiere. No help. :/
    Premiere CC Version: 8.1.0
    Computer information:
      Model Name: Mac Pro
      Model Identifier: MacPro5,1
      Processor Name: Quad-Core Intel Xeon
      Processor Speed: 2.4 GHz
      Number of Processors: 2
      Total Number of Cores: 8
      L2 Cache (per Core): 256 KB
      L3 Cache (per Processor): 12 MB
      Memory: 16 GB
    Graphics  ATI Radeon HD 5770 1024 MB
      Processor Interconnect Speed: 5.86 GT/s
      Boot ROM Version: MP51.007F.B03
      SMC Version (system): 1.39f11
      SMC Version (processor tray): 1.39f11
      Serial Number (system): H00470SREUH
      Serial Number (processor tray): J504301VJBH8B    
      Hardware UUID: 4D6175EA-3353-5E84-BCA0-42A013A69BED

    Hi,
    Please go to File > Project Settings > General and change the video renderer to GPU Acceleration software only and see if that helps.
    Thanks,
    Rameez

  • Google Play closes on start after ICS upgrade on Arc S, accounts and sync empty, setup guide problem

    I upgraded my arc s to ics 4 days ago, i used google play for the first time after upgrade today. It closes on start. I checked Accounts and Sync, my google account is not there, the whole list is just... empty. I tried the setup guide, at the step they ask to connect to services and sync, i clicked the google button, click and click and click, nothing, all the other icons work (like facebook), i searched for gmail app, non existent....... Seems too late to ask for help but im repairing my phone using pc companion now, hope everything works again.... just powered on my phone, i have a feeling nothing will be changed... really sad that Sony didnt realise this.... i cant access google services at all....plain weird
    Solved!
    Go to Solution.

    if I were you I would repair the phone with SUS and see if that solve the issue
    Update Service (SUS)
    http://www.sonymobile.com/gb/tools/update-service/
    http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe

  • Source Monitor and Program Monitor dead in Premier Pro?

    I recently installed Premiere Pro CS6 on my laptop so I could use it on location, but both the Source Monitor and the Program monitor are completly dead. The Source Monitor just displays a bright array of colours when you try to play anything, and the Program Monitor is just plain black. The audio still plays at full volume and I've tested the imported media (a mixture of .jpg, .mov and .mp4 fils) in other programs on my computer and they work fine. Any suggestions people?
    Here is a screen grap of the Premiere Pro doing its thing: https://pbs.twimg.com/media/A2mmd7JCQAEyPXV.jpg:large
    Thanks.
    Brice

    More information needed for someone to help... click these links and provide the requested information
    -http://forums.adobe.com/message/4200840
    -http://forums.adobe.com/thread/416679
    -http://forums.adobe.com/thread/419406
    Is your laptop one of those with dual video?
    Dual laptop video
    -http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
    -http://forums.adobe.com/thread/1001579
    -Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
    -Mac Utility http://forums.adobe.com/thread/1017891?tstart=0
    -HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
    -link to why http://forums.adobe.com/message/4685328
    What is the graphics adapter you have, and what is your driver version?

  • Hd 7970 crossfire w/4 monitor and HT receiver setup....

    is it possible to go hdmi out to receiver(for sound only), dvi to main monitor, mini display ports to 3 for eyefinity??
    any help greatly appreciated.
    thx
    jn

    Em, because you can use HDMI for picture and sound or not at all. You can't use a Radeon as dedicated sound card.

  • Program monitor and source monitor display issues

    Hello, my program monitor is displaying strange colours (inverted?) when playing video. In addition, the source monitor will never display any video although audio plays back fine.
    I am running on a Lenovo ThinkPad X200 laptop with Windows XP 32-bit and an Intel X4500MHD video card with the latest Lenovo-certified driver version.
    From my testing, this problem appears regardless of project settings, file/footage settings, etc. I originally had the K-Lite codec pack installed although I have uninstalled that with no luck.
    This problem surfaced from the moment I opened Premiere after first installing it and I have tried reinstalling the program, my video card drivers, and uninstalling the previously mentioned codecs.
    Also I have a thread on this at the DVinfo forums which has had many responses although no working solution.
    http://www.dvinfo.net/conf/attend-world-premiere/141131-weird-problem-program-monitor-pict ure.html
    DxDiag file here - http://www.dvinfo.net/conf/attachments/attend-world-premiere/10719d1234000711-weird-probl em-program-monitor-picture-dxdiag.txt
    Images in this post - http://www.dvinfo.net/conf/991137-post2.html
    Thanks

    I would try whether killing these processes will help. It may well be that when you kill them all you may encounter hangs, because one or more may be needed for your machine. I would start by killing all Lenovo processes. One would expect that one of these processes may cause your problems, but unless you try it, you can't be sure. Unfortunately I don't have a Lenovo, so I can only guess.
    Process PID CPU Description Company Name
    System Idle Process 0 75.00
    Interrupts n/a Hardware Interrupts
    DPCs n/a 0.74 Deferred Procedure Calls
    System 4 0.74
    DTS.exe 1868 Data Transfer Service
    ibmpmsvc.exe 1880 ThinkPad Power Management Service Lenovo
    AtService.exe 1912 AFSS Service AuthenTec, Inc.
    rapimgr.exe 4452 ActiveSync RAPI Manager Microsoft Corporation
    unsecapp.exe 4628 WMI Microsoft Corporation
    Smc.exe 712 Symantec CMC Smc Symantec Corporation
    SmcGui.exe 3640 7.35 Symantec CMC SmcGui Symantec Corporation
    S24EvMon.exe 764 Intel(R) Wireless Management Service Intel(R) Corporation
    ccSvcHst.exe 1416 Symantec Service Framework Symantec Corporation
    AcPrfMgrSvc.exe 1764 Access Connections Profile Manager Service Lenovo
    EvtEng.exe 396 Intel(R) PROSet/Wireless Event Log Service Intel(R) Corporation
    openvpnas.exe 796
    mdm.exe 1056 Machine Debug Manager Microsoft Corporation
    RegSrvc.exe 1432 Intel(R) PROSet/Wireless Registry Service Intel(R) Corporation
    Rtvscan.exe 2104 Symantec AntiVirus Symantec Corporation
    tvt_reg_monitor_svc.exe 2136 ThinkVantage Registry Monitor Service Lenovo Group Limited
    TPHDEXLG.exe 2164 ThinkVantage Active Protection System - HDD Logger Module Lenovo.
    TpKmpSvc.exe 2176
    tvttcsd.exe 2212 tvttcsd Application Lenovo
    rrpservice.exe 2228 rrpservice Module
    rrservice.exe 2256 Rescue and Recovery Backup Service Lenovo Group Limited
    tvtsched.exe 2268 ThinkVantage Scheduler Lenovo Group Limited
    UpdateMonitor.exe 2292 Fast Restore Application Lenovo Group Limited
    WLKEEPER.exe 2384 Intel(R) WLANKeeper SSO Service Intel(R) Corporation
    AcSvc.exe 2428 Access Connections Main Service Lenovo
    SvcGuiHlpr.exe 3204 Access Connections SvcGuiHlpr Application Lenovo
    PWMDBSVC.exe 2504 PWMDBSVC Module
    SUService.exe 2656 ThinkVantage System Update Service Lenovo Group Limited
    PresentationFontCache.exe 4940 PresentationFontCache.exe Microsoft Corporation
    tp4serv.exe 3316 PS/2 TrackPoint Daemon Lenovo Group Limited
    TPOSDSVC.exe 3444 On screen display message generator for ThinkPad Lenovo Group Limited
    TPONSCR.exe 3108 On screen display drawer Lenovo Group Limited
    TpScrex.exe 3144 ThinkPad UltraZoom Lenovo Group Limited
    ACTray.exe 3100 Access Connections Tray Application Lenovo
    tpfnf7sp.exe 3368 Presentation Director Fn+F7 handler Lenovo Group Limited
    TpShocks.exe 1184 ThinkVantage Active Protection System Lenovo.
    LPMGR.EXE 3928 ThinkVantage Productivity Center Manager Lenovo Group Limited
    LPMLCHK.EXE 732 ThinkVantage Productivity Center MailChecker Lenovo Group Limited
    Amsg.exe 992 Message Center LENOVO
    ccApp.exe 2960 Symantec User Session Symantec Corporation
    scheduler_proxy.exe 3028 scheduler_proxy Application Lenovo Group Limited
    cssauth.exe 3060 CSS Authentication Provider Lenovo Group Limited
    igfxtray.exe 2992 igfxTray Module Intel Corporation
    hkcmd.exe 2272 hkcmd Module Intel Corporation
    igfxpers.exe 1048 persistence Module Intel Corporation
    jusched.exe 824 Java(TM) Platform SE binary Sun Microsystems, Inc.
    ZCfgSvc.exe 912 Intel(R) PROSet/Wireless Zero Config Service Intel(R) Corporation
    iFrmewrk.exe 1296 Intel(R) PROSet/Wireless Framework Intel(R) Corporation
    wcescomm.exe 1844 ActiveSync Connection Manager Microsoft Corporation
    ONENOTEM.EXE 364 Microsoft Office OneNote Quick Launcher Microsoft Corporation
    PWMUIAux.EXE 5144 Power Manager Lenovo Group Limited
    7zFM.exe 2820 7-Zip File Manager Igor Pavlov

  • Color difference between LCD monitor and iMac monitor?

    So I recently purchased a 27" iMac (purchased it last week) and have hooked up my previous monitor, a 24" Apple LCD cinema display (aluminum enclosure) to have a dual-monitor setup.
    Both are using Apple's stock color profiles, but the LCD cinema display is much more yellow than the iMac's display.
    I tried setting the LCD display to use the iMac's color profile without any luck (it didn't get rid of the yellow tint).
    I assumed Apple would have them using the same color settings, but alas it seems that isn't the case.
    So, what should I do to get them to have matching color profiles?

    i have the same problem too...with the same imac 27" i7 like josh..hello josh?
    the only different is my imac hooked up to 20" LCD cinema display (aluminum enclosure)
    yap true josh, its more yellow in the secondary monitor..even with the same color profile.
    i mainly use my imac for motion graphic n post production stuffs...its really annoy me for cannot find the match color for this two screens... ;(
    hope somebody can show us the solution for this problem...

  • New monitor and old monitor on mac mini

    Hi
    I have a mac mini with a thunderbolt port and a new 27 inch led cinema display, i have an old moniter which is 20 inch and i believe has a DVI connection.
    Is there a way i can use this as a second monitor?
    Many Thanks

    You can utilise the second monitor by purchasing a Mini DisplayPort to DVI adapter, placing the adapter in the mini display port and then connecting a DVI cable from the adapter to the monitor.

Maybe you are looking for