Central Person already exists

Hi Experts,
I am Using ECS,SRM4.0.
I have one problem when I am assigning one user thru <Users_Gen>
from already SU01 list and all
at the end I am getting one error msg like
Central Person for this user already exists with E BBPU_MESSAGES 042 & because of this error I can not map this user again in the SRM Org Structure.
I think this user was earlier in the system and then asssignment was deleted for this user. now again user creation time it is showing this error.
Pls let me know the how to solve this issue.
Brgds/Gopesh

Hi
Inorder to create contact person for (business partner), either delete the existing contact person
Use the transaction - BBPMAININT in SRM system.
EBP users are an integral part of the organizational plan and they belong to a certain organization and have to have a position, a business partner ID, a central person and a SU01 - User ID in the SRM System.
Also, refer to the transaction - CRM_OM_BP_INTEGRATE transaction to check the consistency of the Business partner and the contact person.
Hope this will help.
Please rewards suitable points.
Regards
- Atul

Similar Messages

To assign business partner no. to central person

Hi
We are pulling org. structure form HR to SRM system. We are mainating the same central person as well as positon from HR system. But one of the central perosn in SRM is missing the business paterner due to which when I run BBP_BP_OM_INTEGRATE we get an error business partner no unique, I repaired the user I did not work. How to assign business partner to CP.
We are SRM5.0 ECS
with regards
Manjuanth
Message was edited by:
Manjunath Somashekara

Hi
Please try this ->
1.
Go to Web Transaction "Manage Business Partner". (BBPMAININT)
There are several options - go for "Employee for Business Partner" and enter in the field the supplier number or search for the supplier you want to create an employee for. Hit create and fill out the screen. The upper part of the screen creates the employee, in the lower part the user id (with which you logon) is maintained. The structure of the screen is asking all relevant elements needed to create a full SRM users and integrates the account into the Org Model.
For the central Org Unit for Bidders enter the Node Number for the Vendor Root.
How to assign contact person user id to Vendor uploaded from ECC?
OR
2. You need to go into Transaction BP, select the BP for whom you want to change their roles. Click on the change button and then you can select from the drop down field "Change in BP Role" the role that you need for that BP.
Business Partner
Other releated helpful links ->
Re: Central Person already exists
Re: regarding business partner, central person and organizational unit relation
Central Person and BP ID
How to delete Central Person?
Regards
- Atul

How to delete Central Person?

Hello,
I have a situation where when I execute BBP_BP_OM_INTEGRATE for Business Partners (Employee), I encounter the following error...
Business partner with ID 3CA562E5E5A410479819A6FCD7DDA2A6 is not an employee
The repair mode does nothing to fix this error. When I goto into PPOMA_BBP, I found a Central Person who is not assigned to a Business Partner and therfore not attached to any part the organization structure. Is there a way to remove this Central Person? Since the Object cannot be found in PPOMA_BBP, what can I do to resolve this?
Thanks in advance, Dean.

Hi
Please provide the System version details ->
1) You can unassign or block this vendor contact person by using transaction code BP. Find out the business partner number of the vendor contact person and go to the status tab in T-code BP for the role vendor in business partner maintanance and click on block business partner. This will ensure that you are unable to select this business partner in the search criteria.
2) There is a Standard SAP report to delete the Business partner.
Use Transaction SE38 and execute the report BUPA_TEST_DELETE.
You can select Business partner or partners and delete.
3) Either using BBPMAININT (Manage Business Partner - Web Transaction)- Try either - Edit / Delete / Block; this Contact person.
4) You can do it from transaction USERS_GEN. You can delete and/or assign user from there.
Related links ->
Re: Central Person already exists
regarding business partner, central person and organizational unit relation
Hope this will help. Do let me know.
Regards
- Atul

Central Person and BP ID

Hi SRM guru's,
I am transfering the data from the ECC6.0 HCM system to SRM.
In HR system they dont have central person and BP ID.
How can we map the central person to each employee who is being replicated in SRM.
Can I assign a number range for the BP id which are going to be gerenrated after the replication.How can be role assigned when the replication is happening. HR system does not have the role details.
What are the check points for replications and what are the fields tobe looked in before replication.
What are the list of mandatory fields that are to be populated and for the user being able to create SC.

Hi
Please refer to the following links ->
Re: How to assign contact person user id to Vendor uploaded from ECC?
Re: Problem with BP. Assignment: Business partner person to user not unique
Re: Central Person and Contact person relationship
Re: Central Person already exists
Re: Creation of business partners - entries of drop down box
Managing Internal Users
http://help.sap.com/saphelp_srm50/helpdata/en/81/0391a5722811d2b416006094b92d37/frameset.htm
Prerequisites for External Requirements
http://help.sap.com/saphelp_srm50/helpdata/en/18/db183d30805c59e10000000a114084/frameset.htm
Technical Description and Configuration Information
http://help.sap.com/saphelp_srm50/helpdata/en/3c/014b03cc304d2ea89d4540dc98b6e3/frameset.htm
Confirming Goods, Services, and Times
http://help.sap.com/saphelp_srm50/helpdata/en/67/63013a53271a05e10000000a11402f/frameset.htm
Invoice and Credit Memo Entry
http://help.sap.com/saphelp_srm50/helpdata/en/dc/3320381c1e6f12e10000009b38f842/frameset.htm
Regards
- Atul

Maintaining Infotypes in PP01 for Central Person while already maintained n

Dear Team,
When we are using PP01 Transaction code by taking Object type Central Person system is showing is showing IT0001, IT0002, IT0006 and IT0009 etc. Please let us know the purpose of using all these infotypes as we have already maintained the same in PA30 u2013 Maintain master data
Could you please suggest us whether to update these infotypes here or not and what are implication of the same if we maintain them again here?
Kind Regards
Nagesh

Hi,
When you enter central person and click to see data it takes you to PA30 infotypes and this shows that there is CP-P relation and tells you that link exists from OM to PA for same.
It is sufficient to maintain infotypes in PA30 only as this just shows you linkage nothing more.
Thanks,
Ameet

Central Administration not Available, STSADM password reset errors "job-admin-apppool-change" already exists

Hi Everyone,
I think I've shot myself in the foot by not properly following set up instructions.
I have a two-fold problem. Firstly, my Sharepoint Central Administration V4 site is showing
Service Not Available. This seems to be related to the credentials the
Central Administration V4 Application Pool - hitting Test Settings within
IIS Manager for the site shows an Authentication and Authorization error for the credentials due to a bad password.
My reading indicates that I should run something to the effect of:
%STSADM -o updatefarmcredentials -userlogin DOMAIN\username -password <new password as set via AD>
This runs into the following Error message
Error deploying administration application pool credentials. Another deployment may be active. An object of the type Microsoft.SharePoint.Administration.SPAdminAppPoolCredentialDeploymentJobDefinition named "job-admin-apppool-change" already exists
under the parent Microsoft.SharePoint.Administration.SPTimerService named "SPTimerV4". Rename your object or delete the existing object.
I've tried searching out a solution but as yet have been unable to find a mechanism to resolve this error. I have had a look through http://social.technet.microsoft.com/forums/en-US/sharepointadmin/thread/b7c17dac-1cd1-4f75-a031-e28e4fbfd2f7 but
it doesn't seem to relate to the same problems - as far as I know the account from which the command is being run is a farm administrator and the problem seems to be the existing job rather than permissions errors.
Your help will be much appreciated.
Stuart

Hi Stuart Weaver,
Firstly, please check if the SharePoint 2010 timer service is running. If not, please start it manually, then check the effect. In addition to this, you can try to
run SharePoint configuration wizard, then check the effect.
Note: when you start the SharePoint 2010 timer service, make sure you input the latest password. The steps are as follows:
Open services.msc, locate the SharePoint 2010 timer service, double click it, then click log on tab, input the updated password, then click apply.
Hope this helps.
Rock Wang
Regards, Rock Wang Microsoft Online Community Support

This Entry Already Exists in the following table 'Contact Persons' (OCPR)

I was just trying to add a contact name 'Peter' to a BP master data's contact tab. But it is giving me the error message: This Entry Already Exists in the following table 'Contact Persons' (OCPR) (ODBC-2035) [Message 131-183].
We've already have lots of contact name as 'Peter' in our BP data. I don't know why this one can not be updated.
(recently upgraded to SBO 2007A)
Regards,
Yurong

hi Yorung,
Please forward the template to me. WIll check for available possibilities as I had also come accross the same problem and worked it out. Though there are chances that reason in your case may be different.
Try the following things and see the results
1. Try to import in a fresh database. Is it done??
2. Try to enter one data(Contact person) manually in the DB you are trying to import (Old DB). Does the system show the same error?
3. Check that whether your template contains the same Contact person Name for the same BP if it is more than one?
Please see to these areas and revert back. Please forward me the template.
Regards,
Raj

Transferring standard HR Idoc fields to CRM Central Person via ALE

Hello experts!
Here is a description of a scenario I would like some help with please.
We have a fully functioning standard ALE distribution of HRMD_ABA05
IDoc from an HR Instance to a CRM Instance.
The integration is maintaining Central Person data in CRM and then
it maintains the Employee role Business Partner data from the CP.
However it is a requirement to include the additional communication
types and numbers stored in the HR System's PA0006 InfoType.
Our requirement is to transfer fields PA0006-COM01, PA0006-NUM01... etc
from HR to CRM. I understand that the target Central Person InfoType
of PA0006 in CRM is HRP5583. This does not however contain the COM01,
NUM01 fields.
To this end I have tried in vain to implement the instructions
contained in the cookbook attached to SAP Note 758426.
I understand that in order to map this fields to the CRM Employee BP
they must first exist on the Central Person record.
I believe our scenario to be similar to Scenario 2 as described in the
Cookbook in note 758426 except that the data already exists in the
source IDoc.
I have an implementation of Badi HRALEX_INBOUND but am unable to step
into it from debug despite placing external breakpoints with the
correct user... I'm not sure where or when this Badi should trigger?
I would therefore like to know how to extend HRP5583 to include the
extra standard data from PA0006.
Thanks in advance for any help provided.
Jim

hi
you can use PFAL to transfer HR master data.
the data transfer from r/3 to crm is by means of bdoc and not through idoc.
http://help.sap.com/saphelp_crm20c/helpdata/en/3b/e13b38fedcb72de10000009b38f889/frameset.htm
cheers,
hakim

Multiple position for one central person and one user

Dear Guru's,
I have a requirement to create multiple position for a existing User - which already has CP Central Person and S Position.
How to create this new position and assign the same CP to all the new positions ?
Thanks and regards,
Anil Rajpal

Hi
Yes you can definitely do this
Create the new position and assign the CP to this position in transaction PPOME. You may find the position first there in PPOME, and then drag-drop the CP over the position to make the assignment. System will ask the percentage of responsibility.......which you will ve to enter...
Regards
Virender Singh

Issue with IT0031 and Central Person and Business Partner (HRALX PBPHR)

Hello
the following issue appeared in our system:
I have two employee numbers (P1 und P2) that I need to link via IT0031 to make sure they have the same Central Person ID (CP). P1 already has a BP-relation (BP1) - the other doesn't.
When I am now trying to save IT0031 I get the message that P1 and P2 can not be linked - but what is worse, P2 (the one formerly without a BP-relation) now has a BP2 even though nothing was saved in the infotype.
It seems to have something to do with HRALX PBPHR because if I switch the parameter off in T77S0 I am able to link the two P (and therefore make sure only one CP and one BP relation exist) - but is the parameter activated it will generate a new second BP even though there is no cause to do so.
Does anyone know how to fix this?
Unfortunately, I can't let the parameter HRALX PBPHR switched off, so I need some sort of work-around. Any help is appreciated.

Hello
thanks for your reply...but the problem ist not the Central Person but the fact that while trying to link two P the parameter HRALX PBPHR in T77S0 generates a new BP for the P that hasn't had a BP relation before.
In IT0031 no changes are saved due to an error message that results from finding relations to an object - that has not been there before. So, somehow I think this might be a bug or something because I see no reason why the parameter would react to linking two P via IT0031. Because the whole idea of this infotype is to copy CP and BP relations from one P to the other. And it works just fine when deactivating the parameter.

How to insert data from a table into itself if they don't already exist meeting a certain condition

First, let me apologize as I did not write/design this mess, just inherited this terrible design and legacy application!
I have table of companies and a table of suppliers with various attributes and of them being a bit column of is_public. The public suppliers then need to be inserted into the table as suppliers for the other suppliers.
As an example, in the company table company 'PUB01' is flagged as a public supplier (Company.IS_PUBLIC_SUPPLIER = 1). Therefore in the Suppliers table I need to insert a row for each each of PUB01's suppliers in that same table to all the other suppliers
in that table if they do not already exist as follows:
Here is a sample of the table structure:
CREATE TABLE [dbo].[COMPANY](
[COMPANY_ID] [nvarchar](15) NOT NULL,
[COMPANY_NAME] [nvarchar](100) NOT NULL,
[IS_PUBLIC_SUPPLIER] bit NOT NULL,
CONSTRAINT [PK_COMPANIES] PRIMARY KEY CLUSTERED
[COMPANY_ID] ASC
) ON [PRIMARY]
GO
CREATE TABLE [dbo].[SUPPLIERS](
[SUPPLIER_ID] [int] IDENTITY(1,1) NOT NULL,
[COMPANY_ID] [nvarchar](15) NOT NULL,
[SUPPLIER_NAME] [nvarchar](100) NOT NULL,
[PUBLIC_SUPPLIER_ID] [int] NULL,
CONSTRAINT [PK_SUPPLIER_MASTER] PRIMARY KEY CLUSTERED
[SUPPLIER_ID] ASC
GO
Thanks!

Thanks Visakh! Will that work if some have already been inserted previously?
Yes
but if you want to exclude them use this
INSERT INTO Suppliers(Company_ID,Supplier_Name,PUblic_Supplier_ID)
SELECT s1.Company_ID,
s2.Supplier_Name,
s2.Supplier_ID
FROM Suppliers s1
CROSS JOIN Suppliers s2
WHERE EXISTS(
SELECT 1
FROM Company
WHERE Company_ID = s2.Company_ID
AND IS_PUBLIC_SUPPLIER = 1
AND s1.COMPANY_ID <> s2.COMPANY_ID
AND NOT EXISTS (SELECT 1
FROM Suppliers
WHERE Company_ID = s1.Company_ID
AND Supplier_Name = s2.Supplier_Name
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

Won't install java 1.8 says version already exists 14.9

I'm trying to create a database in Open Office which I was able to do fine this morning, but now after updating OO it is telling me "no java installation could be found". When I go to oracle to download the latest Java version the machine tells me I already have version 14.9 installed which as far as I can tell from google searching is not an actual version of Java since every link is in another language. I've gone through the forums to see how to delete the version of "java" that I do have off the machine. Opened the terminal and cut and pasted in the command from this post: When trying to install newest Java, computer says a newer one already exists? But it says I need a password to run the command. There is no solution on this thread. So I'd really love for someone to tell me what the heck give here. (I'm running 10.9.5 and trying to use OO 4.1.1. I've gone through the OO forums to no avail as well.)

How I was able to overcome the Java 14.9.0 problem
My iMac (late 2009) was yesterday updated to Mountain Lion 10.8.5 and today I updated Java through Apple Store, which resulted in Java 14.9.0 and it was unable to run.
After researching, I found the following path that was 100% successful to delete Java 14.9.0 and able to install Java 10.8.40.
On the System Preference for Mountain Lion OS X 10.8.5 go to section:
1. Personal -> Security Privacy -> Firewall -> turn it off
2. General-> Check "Allow application downloaded from anywhere".
(In case if Norton Firewall is on: check it Disabled)
On Finder -> Devices -> Macintosh HD and localize Java Applet Plugin.plugin and move it to trash:
Finder -> Devices -> Macintosh HD -> Library -> Internet Plug-Ins -> JavaAppletPlugin.plugin
Go to www.java.com and install Java version 8 update 40.
After following the steps, verify its installation.
Go back to System Preference and localize in the section Other "Java Control Panel". Click on its icon and go to Security and check "Enable Java content in the browser".
Check browser to activate Java Plug in: Firefox -> Tools -> Add-ons ->Plugins -> Java Applet Plug-in - Java 8 Update 40
Check "Always Activate " or "Ask to Activate"
Hope these paths help you.

When I try to install Lightroom 5.6 I get a "Object already exists" message. I can't install it at all

I updated Lightroom to 5.6 before going away for the weekend. When I came home I was unable to access lighroom all together. After searching I finally found how to chat with customer service (which I can't figure out again) and they told me to uninstall Lightroom, make a new Admin on my computer, and re-install it on the new Admin. When I did this I still get the same "Object already exists" message and it won't even install now.

Do a clean (re)install:
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data if you uninstall the current version.
* Delete the files and folders in the %temp% folder.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
Your bookmarks and other profile data are stored elsewhere (not in the Firefox program folder) and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.

I am using adobe photoshop elements 10. my scanned photos. It scans the photo but an error message comes up that says Nothing was imported because this picture already exist. However these are pics I have never scanned before. Please--I have way too ma

Adobe elements 10 Photoshop will not import my scanned photos.. I keep getting an error message that says the photo already exist. But I know that these photos have not been scanned in the past. They are not in my library. The person in chat says I should come here to the forum and my question will be answered.

I can see that this issue has been quite extensive, and frustrating, and I am so sorry for all that has happened societygirl! I would like to help you work this issue out. Please follow & send me a Direct Message, so I can get your account specifics and help finally bring this to a resolution.
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport

Airport Base Station - setting up base station to already existing network

Hello,
I just replaced a network switch on the network. Since I did that I am unable to get Internet connection from our main base station in the server room that distributes the IP addresses. I did a reset to the base station and tried to get it to show on the already existing network, but I'm having some issues getting the base station configured with the other base stations on the network. How do I get this main base station to show up on our network?
Right now our other base stations are not getting valid IP addresses. The base station that is setup to distribute IP addresses is getting valid addresses from our provider. If someone could give me any suggestions I would appreciate it.
We are running Apple 10.2.4 on our network.

OK - starts to make sense now. If you did a factory reset of the base station then more than likely the airport network name for it is the Apple default name, and you probably lost the WDS in Wireless Mode.
Do you know the old network name and the network password? Do you know how the other 4 or 5 base stations were configured - ie as a WDS network and whether as relay or remote base stations. You should not need to change anything on these base stations if you know how your AEB (main) was setup in the first place.
One step back from this, you need to confirm that the DSL modem is connecting to your ISP. Connect the ethernet cable from the DSL modem to your Mac and confirm that you can log onto your ISP or internet. If it works then lets go onto the AEB you reset.
Apple publish setup manuals for their AirPort Base Stations - they can be downloaded at: http://support.apple.com/manuals/#airport
1. Reset your AEB to its factory default again.
2. Turn-off the AEB and connect one of its ethernet ports to your Mac by ethernet cable, and connect the DSL modem to the WAN port on the AEB by ethernet cable.
3. Power up your Mac, the DSL modem and the AEB and wait for all to complete their startup sequence. Then open AirPort Utility - you should see your AEB under a generic network name. Click on the AEB.
4. Use the auto setup procedure by clicking 'Continue'. Follow the onscreen instructions for setting up a new network. When asked, use the 'original network name' for your school network. When asked for a network password, use the 'original network password' for your school network (what sort of network security were you using - WPA2 Personal - use whatever you had previously.
5. At some stage you will also be asked to give the AEB a name and admin password - use whatever they were previously.
6. When the setup procedure is complete and the AEB finishes restarting, the AEB will reappear in AirPort Utility. Click on the AEB and click 'Manual Setup'. You may be asked for the admin password to get into the configuration profile.
7. Click on the 'Wireless' tab and set the 'Wireless Mode:' to 'Participate in a WDS network' if not already set to this. While in this pane, look at 'Channel:' - do you remember what this was set to previously (if not, you may need to connect one of the other AEBs by ethernet cable to a Mac and use AirPort Utility to check the Channel setting.
8. Now, click on the 'Internet' icon at the top of AirPort Utility. Check that 'Connection Sharing:' is set to 'Off (Bridge Mode)' - if not, change it.
9. Now, click 'Update' and wait for the AEB to restart.
10. Now, disconnect the ethernet cable from the Mac to the AEB ethernet port.
11. Open Airport Utility, and hopefully, you can now see the AEB and the other 4 or 5 base stations.
Let us know what happens.

Central Person already exists

Similar Messages

Maybe you are looking for