Central PI Monitoring and Alerting in Solution manager

According to SAP AG documentation [White Paper|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/104677d9-fc8c-2e10-dc92-c4e660b0dd8c?quicklink=index&overridelayout=true] - the Solution Manager 7.1 onward provides a central PI monitoring for technical componnents and buisness alerts in a single dashboard.
My question is : does the ALE monitoring status also included in this monitor?
                           does the SAP PI IDoc adapter (ABAP Based) of PI 7.11 can be monitored there as well?

Hi,
As per the below help.com ALE/Interface monitoring still part of the Business process monitoring.
http://help.sap.com/saphelp_sm71_sp01/helpdata/en/c7/42f64707c04207b1b17a610c436a34/content.htm
But again PI Idoc adaptor can be monitored using channel monitor of PI monitoring.
http://help.sap.com/saphelp_sm71_sp01/helpdata/en/6a/b663dd510549d58456c38c5d2e0da0/content.htm
Please check,
Thanks,
Jansi

Similar Messages

  • Auto Alerts in Solution Manager!

    I am tryting to configure Auto Alerts in Solution Manager 7.0 EHP1. I have configured the system landscape and created the RFC connections to satellite systems.
    I want to configure system monitoring in SolMan for Satellite systems with Auto Alerts.
    I first configured the system monitoring in SolMan and assigned the processes to be monitored. Then I tried to configure Auto Alerts as following..
    1) created the ARM ( Auto Reaction Method in Tx-RZ21) copying the existing one. ex: ccms_onalert_email
    2) Assigned the Auto Reaction Method to the MTEs that I want to monitor in satellite system ( in Tx-RZ20)
    3) Created the distribution list ( Tx-SO01)
    4) Tried to send the message manually from Tx - SO01 and successful
    5) I changed the threshold values to check if I get any autoalerts but Failed...:-(
    I searched alot for the sap notes but finally confused.....
    Please let me know if I am missing anything here...Or gimme your working exprience in steps..
    Thanks,
    Shai.

    Srikishan,
    Your article is a very helpful one. I did my configuration as it is in your article. But I do not get any auto alerts email notifications.
    When I test the CCMS ping In RZ21. I get the below results.
    CCMSPING: Test Results
    Available Systems - CCMSPING call successful
    Failed CCMSPING Calls
    SID      CCMS_SYSTEM_PING_DEST
    Agents that are reporting errors
    CCMS_SYSTEM_PING_DEST
    And in RZ20  I get the below results:
       Node display off
       Availability and Performance Overview
              Availability
                  RFC-Destinations
                  DDS
                      Availability: DDS
                          Availability                    0 %
                          CCMSPING/Configuration Error    Communication error when attempting to call CCMSPING; see CCMS_SelfMonitoring
    For the Connection Data in monitoting and availability systems I did as following: ( ABAP Message server)
    System     :          DDS
    Description :         Sandbox System
    Message Server Host Name :  bjrtssap1.ca.shainet.com
    IP Service Name            ms.sapDDS_DVEBMGS20
    Router String
    Please let me know if I am missing any configuration here.
    Thanks,
    Shai

  • No EarlyWatch Alert for Solution Manager task in SDCCN

    Hello All,
    We have configured SAP Solution Manager and managed system to generate EWA report.
    In Solman, we have created the system, logical system and solution. We have activated the managed system in Setup EarlyWatch Alert in Solman.
    In Managed system, we have activated SDCCN, assigned BACK RFC, created Maintenance package and refresh sessions.
    However, after completing the Maintenance package task there is no EarlyWatch Alert for Solution Manager task created in managed system. We have reviewed the task logs and found no errors.
    In Solman, when we create EWA for today's date the status is showing with an Hour glass stating that "Wait for session data: SAP EarlyWatch Alert and session number"
    Kindly assist us in fixing this issue
    Thanks in advance
    Regards,
    Satish

    Hi
    the task "early watch alert for solution manager" created automatically when did you perform the task "refreh session" or "Maintenance Package"
    please create the  relevant task, via : SDCCN -> Task -> Create ->Request session data ->Periodic -> Earlywatch Alert -> Continue.
    'Schedule' the start date of the first session  and - Task -- create Click on 'Refresh sessions' - Press 'Enter' - Select 'Now', to schedule the job 'immediately. once you create the relevant tasks you go by,  in the Menu -  Goto -> start - to activate the Earlywatch alert session Now, you can check the finished EWA task in 'done' tab.
    Login to Solution Manager, goto trx. DSWP --> Select your solution, Solution Monitoring - Earlywatch alert -  Click on Earlywatch alert --> start service processing --> Press 'OK' to start the background job - click 'Refresh'
    Now, you can see the 'Early watch alert' in the green colour .
    more further refer here [EWA guide|http://forums.sdn.sap.com/servlet/JiveServlet/download/156-1701991-9166329-1518/EWA_Activation.pdf]
    jansi

  • Monitoring and Alerting Infrastructure : Errors raised during Event Calculation

    Hello together,
    System: Solution Manager 7.1 Sp7
    since one day I get this alert every five minute: "Monitoring and Alerting Infrastructure : Errors raised during Event Calculation".
    Name....................Errors raised during Event Calculation
    Start Time..............20.03.2014 15:12:27 CET
    End Time................20.03.2014 15:12:27 CET
    Managed Object..........Monitoring and Alerting Infrastructure
    Managed Object Type.....Technical Component
    Rating..................Red
    Category................Exceptions
    Status..................Open
    Opening the alert shows this:
    E2E Alert Analysis Report:
    This metric outputs the der Event Calculation Engine (ECE) error messages. The ECE runs by default every minute, under the job name SAP_ALERT_CALCULATION_ENGINE, which then starts the report ACE_CALCULATION_CONTROLLER.
    Analyze the error messages in the Application Log, as follows:
    Start the transaction SLG1, and enter the object E2E_ALERTING and subobject ENGINE.
    When opening trx SLG1 I can see this error:
    Aggregate for managed object 00215ACCD6DE1EE2B8FEE39484598162, type
    80E0ED08ADA71DEEBFD84650DEF6421F not found.
    How can I fix this?
    Thank you very much.
    Regards,
    Ralph

    Hi Ralph,
    We are facing the same issue is our system. I have checked the specified note and observed that few of the systems had to be updated in Managed System Configuration. I have updated the systems. But, the alerts have not stopped.
    Can you please tell me the procedure to resolve this issue?
    Thanks.
    Regards,
    Deepika R

  • Email alert from Solution Manager

    Hi
    I have configured both System and Business Process Monitoring in SAP Solution Manager.
    I can catch all the errors and display them in the graphical view, I can see details and so on.
    Unfortunately I don't receive any email alert from Solution Manager.
    Could somebody provide me a check list to verify where's the problem and why I can't receive email alert?
    Thank you
    Alessia

    Hi Alessia,
    I´d like to help you, but could you plz provide me some more information about your configuration: auto reaction methods, scot, type of monitors etc.
    Dom

  • Early watch alert from Solution manager

    Hi ,
    I have been receiving the earlywatch alerts from Solution manager to my mailbox.
    But this week I didn't receive early watch report . I am getting all other alerts through solution manager to my mailbox.
    I checked in the receipients list and my emailID is there and when I checked in SOST in solution manager I can't see that the report in any status there.
    What will be the probelm?
    Please do reply to this query.
    Thanks
    Gayathri.

    Subhash,
    Thanks for the reply, I checked that already.
    I checked and found that in Early watch report is with status data available , but not send .
    Its showing that the job SM:EXEC SERVICES has to run.
    This job has failed in Solution manager with the error as follows.
    ABAP/4 processor: EXPORT_TABLE_UPDATE_CONFLICT
    Job cancelled
    Thanks
    Gayathri

  • Infrastructure Navigator 1.2 monitoring and alerting

    I was under the impression that Infrastructure Navigator did monitoring and alerting of services and applications where if something stopped working or had issues it can notify you via something like email or SMS etc. From what I have seen it appears that it only shows you what services are running on a VM and the dependencies it has with other servers. Is that the case or am I missing something?

    Take a look at http://www.vmware.com/products/datacenter-virtualization/vcenter-infrastructure-navigator/overview.html:
    vCenter Infrastructure Navigator automatically discover application services, visualize relationships  and map dependencies of applications on virtualized compute, storage and  network resources. A component of the        vCenter Operations Management Suite,  vCenter Infrastructure Navigator enables application-aware management  of infrastructure and operations to better understand the impact of  change, provide more complete disaster recovery protection and minimize  downtime.
    Automatically discover and keep up-to-date the names and version numbers of application components and services
    Visualize application relationships, communication paths and  backend connections at the infrastructure, guest OS and application  level
    Map dependencies of application components on the underlying  virtual infrastructure to understand the impact of change and build  disaster recovery plans with confidence
    The use case you describe is more relevant to vFabric APM - VMware's perfomance management suit which among other capabilities, will alert and notify in case of application performance issues, unavailable services etc. take a look at http://www.vmware.com/products/application-platform/vfabric-application-performance-manager/overview.html

  • CCMS alert through Solution Manager

    Hi,
    Is anyone can tell me how to setup CCMS alert through Solution manager for R/3 system landscape
    how many step are req.
    This means that system alerts which occur in the local CCMS, are passed to the SAP Solution Manager via RFC connections between the SAP Solution Manager and the satellites. The system shows these alerts in a graphic or in Sessions.
    I would like to handle the alerts, without having to go to the local CCMS of the satellite systems.
    I will really appriciated for step by step procedure...
    Thanks in Advanced

    Details of all documents and sims are avalible related to your question @
    http://service.sap.com/rkt
    Good luck,
    Krishna

  • Backup and restore on solution manager in Windows

    Dear Team,
    I have one windows 2003 server in this 3 Harddisk Drive C , D , & E . In this solution manager and saprouter is installed.
    Now I want to move all these installation and data in other system.So that these same think Proper run in other system.l
    How I take the backup of old system and Restore in other new system.
    Because in this BRTOOLS not running.
    Whats is the process of take the backup and restore of solution manager in windows environment.
    pooja

    Hi,
    Solution Manager is dual stack system (ABAP+JAVA). Please refer this useful system Copy guide [How to System Copy ABAP and JAVA|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f055cbd0-97f1-2a10-c09a-907b811de000?quicklink=index&overridelayout=true] to get more detailed information.
    You can use Database Independent or Database Specific method to perform such System Copy.
    You can refer this useful document [Homogeneous-System-Copy-using-OnlineandOffline-ORACLE Backup|http://www.basisconsultant.com/component/remository/Sytem-Copy-Guides/Homogeneous-System-Copy-using-OnlineandOffline-Backup/] to get step by step details. In Database specific method you will have to create JAVA export also in ABAP+JAVA stacks system.
    Regards,
    Bhavik G. Shroff

  • How to config and implement SAP Solution Manager

    Hi,
    We have to  config and implement SAP Solution Manager.
    So plz suggest me the steps to be taken.
    From where we have to start config and implement SAP Solution Manager.
    Regards,
    Radhey Shyam

    Hello Radhey,
    I would suggest you take advantage of the documentation and simulations available in the Solution Manager Ramp -Up Knowledge Transfer area - http://service.sap.com/rkt-solman.
    The areas are broken down by  section and links  such as Overview Build, Config, Deploy, Operation, Optimization, etc are provided. There are many hours of tutorials.
    If you are just starting out, this information is invaluable.
    Regards,
    Paul

  • Monitoring and Alerting tools for Business Object Data Integrator

    Hi,
    We have Business Objects DI installed in AIX 5.3 environment. Please advise any type of monitoring and alerting tools for DI.
    Monitor tools to monitor Job servers(like job service and web services running properly) and also to monitor long running extraction jobs and alerting the same. Thanks.
    Thanks.
    Raj.

    Hi Thomas
    Though both the tools objectives are for Data integration, the purpose for both tools are different.
    SAP BODS/ BOBJ Data Integrator is an ETL tool which involves combining data residing in different sources and providing users with a unified view of the data
    SAP PI is a Middleware/EAI tool which have a mechanism/technology that connects different parts of an application or a series of applications
    SAP BOBJ Data Integrator
    Bulk Data Integration
    Extraction Transformation and Loading
    Deals of huge volume of data
    SAP PI
    It is process based integration of application data
    It is a middle ware which integrates various project applications into a common programming package that can be operate/access as a single application
    SAP NetWeaver PI is SAP’s implementation of Service-oriented Architecture (SOA) middleware and facilitates the integration of business processes that span different departments, organizations, or companies.
    SAP PI uses SAP NetWeaver Application Server and message servers where in fail over cases the messages can be resent again.
    The below differences will gives you more clarity
    Verdict is we can use both the tools for data transfer/migration and for choosing the tool depends upon the business requirement
    Please reply back if you need more information.
    Regards
    Murthy

  • Configuration for Central Monitoring System in SAP Solution Manager.

    Hi Folks,
    I am trying to setup Central System Monitoring in SAP Solution Manager, I am following the document which mention the step by step instructions.
    There are couple of items on which  I am really confused.
    In the documentation it says to activate Background Dispatching & Central System dispatching in 000 client of Solution Manager,
    it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
    Can you guys please help me to configure properly?
    One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
    Also, is there any document which clearly explains the setup of  Central System Monitoring in SAP Solution manager using both approaches and also to test the monitoring?
    I have SAP Solution Manager 7.0 EHP1.
    Thanks.
    Jennifer

    Hi,
    >
    > it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
    >
    You should created this user in working client.
    > Can you guys please help me to configure properly?
    >
    > One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
    >
    You can use RZ21 or System monitoring through work center. From Solution manager 7.1, you need to use work center only. So, I would suggest you to use work center only.
    Thanks
    Sunny

  • Operations Manager 2012 R2 : how to find all my rules, monitors and alerts (all in one custom MP)

    How do I find all the rules, alerts, monitors and whatever in a give custom Management Pack?
    All the bits and pieces I have created I have stored in a MP called "1 - MYDOMAIN CUSTOM"
    Now suppose I want to review all my customisations. How do I do it? I had hoped that it would appear in a scope somewhere...
    CarolChi

    Many thanks
    1) I can't find this: in the Authoring Console I have
    management pack templates, distributed applications, groups, management pack objects
    In Management Pack Objects I have Attributes, Monitors, Rules, ... but no where can I find ALL the customisation I have done.
    2) Where can I find an example of powershell?
    3, 4) Where do I get the override explorer. I was hoping not to have to use other tools.
    5) I read that the Efffective Configuration Tool works with older versions of OpsMgr - is this true?
    6) Again can you help with a link to the MP Viewer Tool?
    CarolChi

  • Configure EWA and performance monitoring of portal in solution manager

    Hello All,
    I want to configure EWA for portal in solution manager.
    As well as want to get some data collection for performance of portal using solman.
    so can anybody guide me for the same as well as provide some valuable inputs.
    Thanks in advance.
    Regards,
    Ramkrishna

    Hello,
    u mean perormance of portal right?
    I would suggest you to start with configuring this EWA,when it is done you will get the performance data from EWA itself and then we can anaylze and move forward
    But still if you want you can refer to notes 485933,1017324 and 934808
    They will be higly useful
    Rohit

  • Portal monitoring and alerting - Industry standard

    Hi All,
    We wanted to put up alert system for Portal. We have the standard set of alerts set which is being taken care by CCMS, also have the solution manager diagnostics set for portal and other systems. What we want is the client side monitoring which could be http response time and if it exceeds the threshold will alert us. Remember the alerting is major criteria here else the monitoring can be performed by diagnostics which we are doing on regular basis.
    Is there a indusrty standard available for portal for such alerts? I am currently analysing 2/3 other products for the same. I want to take an advise from you all that what product is being used at your end and what are the benefits over Solman and CCMS.
    Please let me know.
    Regrdas,
    Pankaj

    Hello Pankaj
    You might want to look into EEM (End-user Experience Monitoring) for SAP Solution Manager which has lots of information available (demo, video) on SAP SDN on the following URL:
    [http://wiki.sdn.sap.com/wiki/display/EEM/Home]
    In short it enables you to record actions of end-users and then monitor those actions (response times and so on) of what your users normally perform during daily tasks and by doing that getting the technical view on what users are experiencing to be slow.
    Kind regards
    Tom

Maybe you are looking for