(Central Server) has been communicating with suspicious IP

RojoLoco wrote:How-to, posted by AlienVault:http://community.spiceworks.com/how_to/86147-how-to-investigate-alienvault-threat-alerts-in-spicewor...Yeah, I think I read this one once. It boils down to, "look up the IP address and think about what you find critically, then decide what to do from there."AlienVault will give you a threat score. I think I've seen as high as 2-3 but never higher (it's out of 10) on the links to their page. I usually paste the IP address into virustotal.com to determine if it's something I should be concerned about.Beyond that, I'm not sure what you'd be able to do aside from check for malware,block the IP addresses at the gateway, which, if you're getting a lot of them could be a tedious, losing battle, or, I guess you could rebuild those machines.Sometimes I get the feeling that, if it's a workstation,...

I am getting these in spiceworks much more recently. Links point to an Alienvault for remediation. What is this?, becauseI am not seeing any elevated threats on my Palo Alto FirewallAll that is being said in my Spiceworks is the following:(Central Server) has been communicating with suspicious IP204.11.56.48. View Threat Details.(Central Server) has been communicating with suspicious IP 46.165.220.157. View Threat Details.(Central Server) has been communicating with suspicious IP 173.201.20.173. View Threat Details.(Central Server) has been communicating with suspicious IP 104.207.141.81. View Threat Details.(Central Server) has been communicating with suspicious IP 137.135.101.1. View Threat Details.(Central Server) has been communicating with suspicious IP 23.253.10.48. View Threat Details.(Central Server) has been communicating with...
This topic first appeared in the Spiceworks Community

Similar Messages

  • Internet Download error message: the connection with the server has been reset

    With an WRT54GS v6 firmware v 1.50.9 on Windows XP SP2 with Internet Explorer 7, Intel wireless internal adaptor w/ 802.11b,  I was getting the error message "The connection with the server has been reset" when downloading most anything from the Internet.  My IP address would then be reset and download would be interrupted.  To resolve, I turned off the WZC (Wireless Zero Configuration) Services, and this seems to correct the problem.
    Control Panel > Admin Tools > Services > Wireless Zero Configuration > Disable
    Hopes this helps.

    Hi!
    Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
    So, what can I do now?
    Thanx

  • OVM-2008 The Server Pool Master has been registered with some other pool

    I am getting this error, while creating my first ever server-pool.
    Check prerequisites to create server pool (First-Pool) failed: (OVM-2008 The Server Pool Master (172.16.0.37) has been registered with some other pool, and can not register it again.)
    Any idea what can be going wrong?
    regards, Yora

    The only time I've seen this is when the server really has been registered with another pool. You need to clean out the local ovs-agent database at */etc/ovs-agent/db* and restart the agent.

  • JMX Connectivity has been discontinued with the managed server

    Dear all,
    I am getting following msg in my weblogic 11g manage server and admin server.
    Namage Server Log
    ####<Nov 22, 2010 2:15:39 PM IST> <Warning> <Log Management> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '22' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290415539687> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
    Admin Server Log
    ####<Nov 22, 2010 2:13:35 PM IST> <Info> <JMX> <NewTradeServer> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290415415015> <BEA-149507> <JMX Connectivity has been discontinued with the managed server NewTradeServer.>
    ####<Nov 22, 2010 2:13:35 PM IST> <Info> <Server> <NewTradeServer> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290415415015> <BEA-002634> <The server "NewTradeServer" disconnected from this server.>
    ####<Nov 22, 2010 2:51:32 PM IST> <Info> <Server> <NewTradeServer> <AdminServer> <[ACTIVE] ExecuteThread: '11' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417692374> <BEA-002635> <The server "NewTradeServer" connected to this server.>
    During this time my admin server in running, i can able to loggin to admin server console,
    Problem which i am faceing is that, i am not able to see the server status of that particular
    manage server, i am not able to see the any sub tabs statistic in Monitoring TAB of manage server, and after 1/2 and hours the manage server stop responding, then i restart the manage server and after that every thing work fine..
    any one have the solution for this error????///
    Regds
    Amar Shaw

    Kindly fing the log for the server problem time.
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 122.177.97.179:21,557 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 117.206.128.110:1,069 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 203.123.173.169:50,920 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 59.180.84.228:50,902 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 120.61.132.164:1,297 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 122.166.48.41:21,631 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 125.22.34.38:39,481 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 113.193.25.104:52,294 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 172.17.1.122:18,934 during the configured idle timeout of 5 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 115.241.80.244:24,575 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 196.15.16.20:38,791 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 202.65.136.252:4,055 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 80.239.242.168:46,777 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 110.227.109.138:64,362 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 59.93.223.187:1,046 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 114.30.77.228:50,110 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 122.164.238.6:1,935 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 192.20.251.68:41,430 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 195.189.142.85:51,932 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 180.150.250.17:3,974 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 82.178.3.115:11,545 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 125.21.153.192:7,902 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 59.177.2.33:50,437 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 117.201.90.244:5,725 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 220.227.95.145:17,067 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 115.248.137.70:33,786 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 172.17.1.121:6,260 during the configured idle timeout of 5 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 59.93.55.98:6,387 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 122.162.145.253:1,603 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 80.239.242.168:46,443 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 120.61.132.164:1,298 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:09 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417549593> <BEA-000449> <Closing socket as no data read from it on 121.243.135.163:2,342 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 117.202.130.167:1,451 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 204.194.141.28:15,387 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 180.215.198.169:2,108 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 180.150.250.17:40,204 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.93.168.80:1,044 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 117.241.82.55:50,090 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.93.134.134:1,079 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 122.162.69.77:4,185 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 155.56.68.217:60,708 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 121.245.188.43:1,262 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 125.17.188.19:45,490 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 122.165.58.249:49,239 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 61.17.215.126:4,085 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 124.125.27.11:2,992 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 172.17.1.121:7,639 during the configured idle timeout of 5 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 61.246.47.199:2,426 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 122.169.70.18:14,392 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.144.98.242:42,408 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 117.197.237.98:51,852 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.163.89.69:64,984 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 192.20.246.168:13,547 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.144.98.242:37,198 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.144.98.242:39,842 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 117.202.130.167:1,450 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.90.72.203:3,972 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 155.56.68.217:58,671 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 59.93.168.80:1,043 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 122.163.163.25:1,957 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 115.240.50.203:1,059 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 203.197.42.2:34,187 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 203.124.135.246:21,650 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 93.186.23.240:11,235 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 172.17.1.133:4,215 during the configured idle timeout of 5 secs>
    ####<Nov 22, 2010 2:49:14 PM IST> <Warning> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '91' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417554593> <BEA-000449> <Closing socket as no data read from it on 122.161.99.67:20,466 during the configured idle timeout of 25 secs>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <WebLogicServer> <NewTradeServer> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1290417576578> <BEA-000000> <WebLogic Server "NewTradeServer" version:
    WebLogic Server 10.3.3.0 Fri Apr 9 00:05:28 PDT 2010 1321401 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Notice> <Log Management> <NewTradeServer> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1290417576703> <BEA-170019> <The server log file D:\BEA11G\user_projects\domains\IndiabullsWLS\servers\NewTradeServer\logs\NewTrade_%yyyy%_%MM%_%dd%_%hh%_%mm%.log is opened. All server side log events will be written to this file.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Log Management> <NewTradeServer> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1290417576718> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Diagnostics> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576812> <BEA-320001> <The ServerDebug service initialized successfully.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "t3" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "t3s" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "http" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "https" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "iiop" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "iiops" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "ldap" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576906> <BEA-002622> <The protocol "ldaps" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576921> <BEA-002622> <The protocol "cluster" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576921> <BEA-002622> <The protocol "clusters" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576921> <BEA-002622> <The protocol "snmp" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576921> <BEA-002622> <The protocol "admin" is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576921> <BEA-002624> <The administration protocol is "t3s" and is now configured.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <RJVM> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576937> <BEA-000570> <Network Configuration for Channel "NewTradeServer"
    Listen Address          172.17.1.134:80
    Public Address          N/A
    Http Enabled          true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <RJVM> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576937> <BEA-000570> <Network Configuration for Channel "NewTradeServer"
    Listen Address          172.17.1.134:443 (SSL)
    Public Address          N/A
    Http Enabled          true
    Tunneling Enabled     false
    Outbound Enabled     false
    Admin Traffic Enabled     true>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Server> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576968> <BEA-002609> <Channel Service initialized.>
    ####<Nov 22, 2010 2:49:36 PM IST> <Info> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417576999> <BEA-000406> <NTSocketMuxer was built on Jan 24 2006 20:40:35
    >
    ####<Nov 22, 2010 2:49:37 PM IST> <Info> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417577078> <BEA-000436> <Allocating 4 reader threads.>
    ####<Nov 22, 2010 2:49:37 PM IST> <Info> <Socket> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417577078> <BEA-000446> <Native IO Enabled.>
    ####<Nov 22, 2010 2:49:37 PM IST> <Info> <IIOP> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417577281> <BEA-002014> <IIOP subsystem enabled.>
    ####<Nov 22, 2010 2:49:38 PM IST> <Info> <Security> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417578718> <BEA-000000> <Starting OpenJPA 1.1.1-SNAPSHOT>
    ####<Nov 22, 2010 2:49:38 PM IST> <Info> <Security> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417578796> <BEA-000000> <StoreServiceImpl.initJDO - StoreService is initialized with Id = ldap_KNcrxQIcWPsGUMqWWNL3mWV+Tkc=>
    ####<Nov 22, 2010 2:49:39 PM IST> <Info> <Security> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417579203> <BEA-090516> <The Authorizer provider has preexisting LDAP data.>
    ####<Nov 22, 2010 2:49:39 PM IST> <Info> <Security> <NewTradeServer> <NewTradeServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1290417579390> <BEA-000000> <Parsing class "com.bea.common.security.store.data.Top".>
    ####<Nov 22, 2010 2:49:39 PM IST> <Info> <Securit

  • Error -1074384569; NI-XNET: (Hex 0xBFF63147) The database information on the real-time system has been created with an older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your database to the real-time system.

    Hello
    I have a VeriStand-Project (VSP) created with my Laptop-Host (LTH) which works with my PXI, while
    deploying it from my LTH. Then I have installed the whole NI enviroment for PXI and VeriStand use on a
    industrial PC (iPC). I have tried to deploy my VSP from the iPC to the PXI but the following error
    message arose on my iPC:
    The VeriStand Gateway encountered an error while deploying the System Definition file.
    Details: Error -1074384569 occurred at Project Window.lvlibroject Window.vi >> Project
    Window.lvlib:Command Loop.vi >> NI_VS Workspace ExecutionAPI.lvlib:NI VeriStand - Connect to System.vi
    Possible reason(s):
    NI-XNET:  (Hex 0xBFF63147) The database information on the real-time system has been created with an
    older NI-XNET version. This version is no longer supported. To correct this error, re-deploy your
    database to the real-time system. ========================= NI VeriStand:  NI VeriStand
    Engine.lvlib:VeriStand Engine Wrapper (RT).vi >> NI VeriStand Engine.lvlib:VeriStand Engine.vi >> NI
    VeriStand Engine.lvlib:VeriStand Engine State Machine.vi >> NI VeriStand Engine.lvlib:Initialize
    Inline Custom Devices.vi >> Custom Devices Storage.lvlib:Initialize Device (HW Interface).vi
    * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * • Unloading System
    Definition file... • Connection with target Controller has been lost.
    The software versions of the NI products (MAX/My System/Software) between my LTH and the iPC are
    almost the same. The only differences are:
    1. LabView Run-Time 2009 SP1 (64-bit); is installed on LTH but missing on iPC. The iPC has a 32-bit system.
    2. LabView Run-Time 2012 f3; is installed on LTH but missing on iPC.
    3. NI-DAQmx ADE Support 9.3.5; something strage on the LTH, because normally I am using NI-DAQmx 9.5.5 and all other DAQmx products on my LTH are 9.5.5. That means NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5.. On the iPC side all three products are 9.5.5.. That means NI-DAQmx ADE Support 9.5.5, NI-DAQmx Device Driver 9.5.5 and NI-DAQmx Configuration 9.5.5..
    4. Traditional NI-DAQ 7.4.4; The iPC has this SW installed. On the LTH this SW is missing.
    In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
    1. LabVIEW Real-Time 11.0.1
    2. NI-488.2 RT 3.0.0
    3. NI_CAN 2.7.3
    Unfortunately the above stated problem still arose.
    What can I do to fix this problem?
    I found a hint on http://www.labviewforum.de/Thread-XNET-CAN-die-ersten-Gehversuche.
    There it is written to deploy the dbc file againt.
    If this is a good hint, so how do I deploy a dbc file?
    I would feel very pleased if somebody could help me! :-)
    Best regards
    Lukas Nowak

    Hi Lukas,
    I think the problem is caused by differenet drivers for the CAN communication.
    NI provides two driver for CAN: NI-CAN and NI-XNET.
    NI-CAN is the outdated driver which is not longer used by new hardware. NI replaced the NI-CAN driver with NI-XNET some years ago, which supports CAN, LIN and the FLEXRAY communication protocol.
    You wrote:
    In order to fix this problem I have formatted my PXI and I have installed the following SW from the iPC:
    3. NI_CAN 2.7.3
    NI CAN is the outdated driver. I think that you should try to install NI-XNET instead of NI-CAN on your PXI-System, to get rid of the error message.
    Regards, stephan

  • App World Web Plugin Error: An error has occurred communicating with the BlackBerry App World Client.

    App World Web Plugin Error
    An error has occurred communicating with the BlackBerry App World Client.
    Please help me with this problem. I have a new Blackberry Storm 2. When I sign in, it asked me to get the BB appworld browser plug-in and connect my smartphone. So, i did connect it. Then, this message kept on popping out. I don't know how to fix it.

    Okay. this is what I do.
    I go onto http://appworld.blackberry.com/webstore/ & sign in. I then connect my phone & enter the device password. As soon as I do that, this comes up -> App World Web Plugin Error
    An error has occurred communicating with the BlackBerry App World Client.
    I don't know what's the problem & I've been searching for a solution but to no avail.

  • VM manager cannot add pre configured server - Says server has been managed

    Hey,
    I had 2 server with 2 virtual systems installed and running on it.
    My manager had some issues and had a bad hard disk and a network card.
    So I freshly installed the manager on a new box.
    Now when i try to add those 2 servers in the pool - I get this message
    " Server has been managed."
    ....Any idea on this..???
    I don't have older manager ,where i can go and delete the entry of the server.

    If for some reason that the server is not cleaned up properly, you may see the error message:
    "Error: - 'hostname' has been managed." (from Oracle VM Manager)"
    You can manually reset the Oracle VM Server agent. First, shutdown the VMs on the server and make sure no VMs running on the server:
    # xm list
    # xm shutdown domain-id
    Then, stop Oracle VM Server agent:
    # service ovs-agent stop
    Clean up the Oracle VM server agent state files from /etc/ovs-agent/db location :
    # rm -rf /etc/ovs-agent/db/*
    And restart Oracle VM Server agent
    # service ovs-agent start
    One the Oracle VM Server agent is up and running, you can register the server with the Oracle VM Manager.

  • Content has been indexed with Info only. Resubmit should only be performed

    Hi All,
    Im using the Oracle Content Server (OCS) , When im trying to checkin new document then i get the below mentioned error message can any one plz tell me that what is the problem.
    Error Message:_
    Text conversion of the file failed.
    Content has been indexed with Info only. Resubmit should only be performed if the problem has been resolved.
    Text conversion of the file '//awusrp04/PortalStg/oracle/inetucmstg/weblayout/groups/public/@enterprise/@hr/documents/document/s_013020.pdf' failed.
    **Content has been indexed with Info only. Resubmit should only be performed if the problem has been resolved.      **

    Hello Experts,
    I am Facing the Same Issue, anybody know the solution for the same?
    Thanks in Advance.

  • How to add DNS server to CER after Server has been Built

    How to add DNS server to CER after Server has been Built?
    The reason why, the CER 1.3.1 that I upgrade to 7.1, had the switch list by hostname,
    The install of 1.3.1 had the LMHOST file editted with all the switch names.
    Is there such thing as a host file on 7.1 CER? If not, that is where I need to add the DNS server now. As they will have to add the switch hostnames to the DNS server.
    Thanks
    Kallol

    I found where to set the DNS via CLI...
    admin:set network dns
          set network dns options
          set network dns primary
          set network dns secondary
    Also it requires me to configure the domain name.
    set network domain name

  • Adobe server has been hacked?

    Hi...
    I wonder if adobe customer data are safely secrused..
    For each site I provide an alias with the name adobe ... just to follow if the site use my mail adress... and today I just received a strange mail at adobe@myserver !
    So I suppose adobe server has been hacked ...
    a was with this instructions inside  (and it's not in good french):
    Nous invitons tous les individus et entités juridiques pour examen et suivons
    strictement les instructions de Inland Revenue .
    Matériel pour la consultation (MR ) est particulièrement recommandé à ceux qui
    utilisent les services financiers (par exemple ,. Internet Banking )
    Un espace dédié au contrôle fiscal et à la lutte contre la fraude est ouvert ce
    jour.
    Dans le cadre du Comité national de lutte contre la fraude du 22 mai 2014, les
    Ministres ont présenté un plan d'action dit < plan contrôle citoyen >. Parmi ces
    mesures figure l'ouverture d'un espace dédié au contrôle fiscal et à la lutte
    contre la fraude. Cet espace est désormais ouvert.
    La lutte contre la fraude fiscale est une priorité du Gouvernement. Elle passe
    par une action renforcée en matière de contrôle mais aussi par la prévention des
    risques.
    Cet espace a donc pour objectif de présenter l'organisation et le fonctionnement
    des services du contrôle fiscal, de fournir des informations claires,
    pédagogiques sur la façon dont se déroule un contrôle fiscal et de mieux
    informer des risques encourus pour éviter les erreurs et les pertes budgétaires
    potentielles. Ainsi, certains schémas frauduleux sont décrits dans cet espace
    pour éviter aux entreprises, qui cherchent à acquitter correctement leurs
    impôts, d'être impliquées par exemple dans des fraudes à la TVA. Des fiches ou
    notices sur des sujets complexes ou sur des points faisant fréquemment l'objet
    de rappels seront également mises à disposition. Une notice pédagogique sur le
    crédit impôt recherche est d'ores et déjà disponible.
    Cet espace sera régulièrement enrichi et actualisé, notamment avec des
    commentaires de certaines évolutions jurisprudentielles impactant le contrôle
    fiscal.
    Figure également dans cet espace, un document questions-réponses sur le
    dispositif de régularisation des avoirs à l'étranger non déclarés.
    À cet égard , il a préparé une nouvelle application informatique,
    l'identification de l'analyse de risque pour les personnes et les fonds
    définition synthétique de revenu.
    C' est un outil innovant qui sera l'objet de la mise en œuvre et des
    améliorations visant à optimiser la fonctionnalité
    I N S T A L L E R
    interlomar.nazwa.pl/InstallerEspaceControle.zip
    (I don't give the complet link just to be sure someone will not clik on it)
    regards,
    Rudolf

    How long have you had the account?

  • 9i - How to Determine If Oracle Management Server Has Been Configured ?

    hi all,
    I'm using 9.2 on a Windows 2000 server - but I'm new to this server and don't know what has been done in the past.
    I'm getting the VTK-1000 error when I try to connect in Oracle Management Server mode.
    To determine the problem, I need to know how I can determine whether the Oracle Management Server has been created/configured. Also, how can I know that the Repository has been created?
    This is what I've tried:
    -Tried logging in as sysman with a password of oem_temp
    - checked the Windows services - none exist as OracleManage... which causes me to think OMS was never configured
    But I dont want to destroy something that may already exist. That's why I want to confirm first.
    Sorry for the lame question - I'm new to Oracle.
    Thanks, John

    Well, then you don't have the SYSMAN password. Here you have two options, the first one, is to try to recover that repository or the second option, to get rid of this repository and create a brand new one.
    If you are willing to use the existing repository, then you will have to reset sysman's password, the procedure to perform this task is as follows:
    Connect by means of SQLPlus to the repository, you should open a session with the OEM repository database owner. In case you don't have this password (most probably) you will have to temporarily reset this password, as outlined on the bottom procedure.
    Open a session to the database as the OEM repoistory owner, let's say OEM_REP or whatever is the actual repository.
    sqlplus <OEMRepositoryOwner>/<OEMRepositoryOwnerPassword>@<OEMRepository>
    At the SQL prompt issue the command:
    execute smp_maintenance.reset_sysman();
    Your sysman password will be reset to OEM_TEMP, then you can enter if the repository is up and running, and you can issue commands to check status and shutdown it.
    Temporarily resetting a db user password:
    1. Connect to the database as sysdba:
    sqlplus / as sysdba
    2. At the sqlplus prompt query the dba_users table to get the password:
    select username, password from dba_users where username='<OEMRepositoryOwner>';
    Copy the current password in a safe place.
    3. Set a new password, let's say 'X'.
    Alter user <OEMRepositoryOwner> identified by X;
    4. Once you are done with the previous reset sysman procedure, then you can restore the user password:
    alter user <OEMRepositoryOwner> identified by values '<PreviouslyEncodedSavedPassword>';
    Then you are done.
    ~ Madrid
    http://hrivera99.blogspot.com/
    .

  • No PPPoE server has been found for the specified service.

    I am getting the following error message when connecting to our ISP via PPPoE. I have a PC that connects to the ISP no with problems.
    Have tried creating a new service but still have the same problem.
    Error message
    No PPPoE server has been found for the specified service. Please delete the service name option ans try again.

    Not sure what you are trying to do but it PPPoE (Point to Point Protocol over Ethernet) connection and authentication will be handled at the modem.
    This is only true if the modem has an integrated PPPoE client most Modems dont have this. A modem/router does have this but may need reconfiguring if the ISP supplied it in bridged mode.
    Mongolain-Al
    What is the make and model number of your modem?

  • The connection to the server has been lost

    The Connection to the server has been lost.There might have been a problem in connection to the network, or Playstation TM networkor the service provider might be temprarily busy.(CE-34861-2) 

    im having the same problem its not letting me log in? 

  • HT201272 How do i see a list of the apps that have been downloaded and the dates and times and amounts?  Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill.  HELP!!

    How do i see a list of the apps that have been downloaded and the dates and times and amounts?  Tried to follow the on-line thing but i want to compare what has been downloaded with my visa bill.  HELP!!

    See this -> http://support.apple.com/kb/HT2727

  • HT1338 Updated my imac from 10.6 to 10.8.2 recently. My iphoto logo in my Dock has been replaced with a transparent "question mark" and I can no longer access my iPhotos... please help!!  Mark Howell

    Why can I no longer find my iphotos?  Updated from 10.6 to 10.8.2 recently... The iphoto logo in my dock has been replaced with a transparent, grey, question mark... why? How do I restore my iphotos?  Searched for them in Finder, and in "search"... they appear as text only.. but no photos.. please help.. Mark

    Have you verified that the iPhoto applications is not in the Applications folder or somewhere else on the hard drive? 
    To do so download and use  Find Any File to search for "iPhoto.app" because FAF can search areas that Spotlight can't.  If the application is somewhere else on the HD FAF will find it.  However, I doubt that it will be there but it's worth a search. 
    OT

Maybe you are looking for

  • Letterboxing on thumbnail images

    Hello I have the most unusual problem I have ever encounted with a mac and I am seeking help. No matter what movie file I have on my desktop (and any other folder) and whether it is .mov, wmv or downloaded off an iphone, the thumbnail is automaticall

  • SQL DATEDIFF problem

    I want to update all records based on a datediff. So I have this UPDATE myTable SET active = 0 WHERE datediff('dd',updated,'#inputDate#') I'm getting an error saying invalid function call. I've tried just about every variation I can think of and sear

  • "Invalid URL" download Oracle REST Data Services 2.0.7

    help! Invalid URL The requested URL "/otn/java/ords/ords.2.0.7.91.15.01.zip", is invalid. Reference #9.bc04503f.1398060990.218b703 Invalid URL The requested URL "/otn/java/ords/ords.2.0.6.42.09.36.zip", is invalid. Reference #9.a504503f.1398061061.2a

  • Documentation Template for Infoset

    Hi, I need a template for Documentation of Infoset. Thanks in Advance.

  • JavaFX Studio plug-in for Eclipse version 1.1

    [JavaFX Studio plug-in for Eclipse version 1.1|http://exadel.com/web/portal/javafxstudio] from Exadel is now available. The plug-in is free. The major new feature is code assist inside JavaFX editor. Max http://mkblog.exadel.com