Central switching NOT work.

Good mooring,
My lab is:
1) Virtual controller 7.3.112 is OK
2) N° 2 LAP 1130 e 1240 is Joined to controller OK
3) flexconnect in localswitch is OK
4) flexconnect in central switch IS NOT work.
please can you help me to find the problem.

I fixed the problem.
the problem was "Promiscuous Mode" of the "data port" Port-group.
this is very impacted solution, because this requirements t is not married to the same logic virtualization.
I have the hypervisor implemented as " best practics" of Cisco and VmWare:
only one port-channel on vswitch with aggregation of ALL NiC ( in only one VSwitch) of the server for I/O traffic client-server.
I can not reserve the Phisycal interface for to made new Vswitch dedicated to this news virtual machine.
this is and requirements very strange for virtualization implementation.

Similar Messages

I have problem with my iphone 5 lock switch..as lock switch not working properly..and my iphone is not in warrenty.. so plz tell me what i do...

i have problem with my iphone 5 lock switch..as lock switch not working properly..and my iphone is not in warrenty.. so plz tell me what i do...

The iPhone 5 is less than a year old, so all of them should still be in warranty unless they have been jailbroken or physically damaged. If you have a hardware problem as you describe the only option is to get the phone replaced by Apple or repaired by a non-authorized shop. The Apple replacement will be free at any Apple store in the country where the phone was purchased. If Apple determines that the phone was physically damaged or jailbroken it will cost $229.

HT1430 My iphone5 on/off switch not working, even we not able to reset the phone

Hi,
My iphone5 on/off switch not working, even we not able to reset the phone

OK, so are you asking what do to, or are you just sharing your situation?
If you're asking what to do, then you should bring your phone to Apple while it's still under warranty.

Application switcher not working as expected

I am using the French localisation of Leopard. Using Application switcher (ie Cmd-Tab) I was able on Tiger to quit a running app by pressing A (an oddity due to the AZERTY / QWERTY differences). This does not work any more and I cannot quit an application from Application switcher. Any advice?

Cool. Learn a new trick every day... It works on my English keyboard (with the Q).
Maybe the "oddity" has been fixed and it is no longer A on the French keyboard, but Q, as it should be.

Keyboard layout switching not working

i use xfce4 and i created /etc/X11/xorg.conf
Section "InputClass"
Identifier "Keyboard Defaults"
MatchIsKeyboard "yes"
Option "XkbLayout" "us, ar"
Option "XkbOptions" "grp:alt_shift_toggle"
EndSection
but it's not working.
xfce4 has a program called Keyboard in settings menu, i used it it gives the ability to add another language but it doesnt has a switching capability.

I don't use keyboard layout switch through xorg.conf because it stops to work sometimes(if i use setxkbmap for example).
So i am using setxkbmap in .xinitrc.
setxkbmap -model pc105 \
-layout "de,ru" \
-variant "basic,phonetic" \
-option -option "grp:sclk_toggle, grp_led:scroll, terminate:ctrl_alt_bksp, caps:none"
and "kbdd" for remembering layout for each window.
Change it to your needs or check the arch wiki about xorg.conf.d .

Has anybody experienced the iPhone off switch not working all the time.

I have an iPhone 5, it's about 16 months old and it has experienced an annoying issue. The off button does not work all the time, sometimes I have to press it multiple times and other times it just works. The worst case is when it does not work at all, very frustrating. I didn't expect this type of issue for a phone that is not even a year and a half old.
I did some searching on the internet and there are 2 schools of thought, the first is that this is a hardware fault and Apple know about it but won't admit it because it would cost them too much to repair/replace phones with the issue. The second school of thought is that it is a software issue and a backup/reset/restore will fix it; I tried doing this but it did not resolve the issue.
Further digging seemed to suggest that it was really a hardware fault and the only option was to get a refurb from Apple for a ton of money, not cool.
Anyway, if anyone has any more information that could help me resolve this issue I would greatly appreciate it.
//*eggbox23

@diesel vdub, thanks for your suggestion, I setup an appointment with the Genius Bar and found out in about 5 minutes that everything I have read up on so far is true.
Firstly the technician admitted that there is a sporadic fault on the iPhone 4s and iPhone 5 switches, something to do with the design of the switch that included a rubber element that rolls up (whatever that means) and causes the switch to fail. He then indicated that the iPhone 5s does not have the issue because the switch has been completely redesigned.
Since I was stupid enough to not take out the extended warranty the only options he gave me were to purchase a new phone or to get a refurb for $269, not cool. Why would anyone think that a phone would not work correctly for 2 whole years when the phone only cost about $600!
Since I have about 7-8 months left on my phone contract I am not prepared to pay for either option. I find it amazing that a phone can develop this type of issue in such a short time and then expect the customer to pay for their failures. Apple supposedly sells a very high quality product for a very high price, looks like they have taken a step back from this philosophy.
I am disappointed in the options that he gave me (I don't blame the technician) but I suppose I expected more from Apple in terms of quality and service.
//*eggbox23

Three Way Switch not working

Hi, i just bought a 4th-gen shuffle, and I've been using it with satisfaction since Saturday. Then yesterday i finished to listen to some music and I wanted to turn it off, so I slid the switcher to the right. The problem is that it won't turn off, no matter where I drag the slider, I'm still able to play music with it...
I'll try to restore it as soon as possible, cause I can't even try to reset it via turning it off...
Any clues? Thanks in advice

HI,
My Buddy list from iChat were separated before and stayed separated on "Upgrading"
The group names also stayed the same
Uploaded with Skitch!
I have Magic Mouse and single finger swipes do not work in either direction. (I don't have Laptop and track pad to test further.)
Actually changing it from the Browser Single Finger "Scroll" to "Swipe" with two fingers solved this.
Uploaded with Skitch!
You do lose access via Swipes to Full windowed apps. (you have to click the DOCK)
I find that then I do have access up a d down the list of open Chats.
9:24 PM Monday; March 26, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Mountain Lion, Automatic Graphics switching not working.

I have noticed when upgraded to Mountain Lion that my automatic graphics switching is not working as i would expect ..When i start Chrome my discrete graphics Intel 3000 turned off and all i get is AMD HD grapchics without using any graphic intense proccess please help here is my screen shots :
1: as you will see i have 1 tap open and nothing on the background except ACM
2: after 10 minutes writing on this post
PLEASE HELP.

I'm not sure that the dialog box indicates which graphics are currently being used?
Also, you have Google Chrome running. It's possible that Chrome invokes the discrete GPU... they acknowledged they had some code in Chrome that was activating the GPU and actually causing kernel panics on the new Retina MacBook Pros recently...

K430/K450: here`s the SOLUTION to Lenovo Power control switch not working anymore.

If your power control switch isn`t working anymore BUT you didn`t unistall it or erase some of his files, chances are that over time some software/update took control of some setting used by the Lenovo switch.
If this is the case, before reinstalling the software, try the following:
1 - Check your power plan option, if is on something else than Lenovo change your power plan option (scheme) to Lenovo Power Scheme.
2 - Access your pc advanced startup setting (win+x) check for the services LitModeCtrl and LenovoComService and set the two services to automatically start when the computer startsup. If it`s not working 99% is because some software (the most common is Samsung SSD Magician) has set the two to "Manual". Change to "Auto".
3 - Reboot and the Power control switch software will be working again.
I wonder why no one from Lenovo advice this, but i`ve had to find a solution myself after countless hit & miss attempts.

hi FlashOfLight,
Welcome to the Forums.
Have you tried performing a system restore to undo the changes? (by default, this feature is set to enabled)
regards,
neokenchi
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Nano 4th gen hold switch not working

Hello. I just bought a used nano 4th gen on eBay. The hold switch is not working - the click wheel remains active and no lock icon appears in the upper right corner of the screen. It's on the latest firmware 1.04 and I've done a restore twice already.
The seller claims the hold switch did work before he sent it. Is there anything I can try to get it to work? It's out of warranty.
Thanks
David

iPod nano (5th generation) - User Guide
Every iPod comes with complimentary, single-incident telephone technical support within 90 days of your iPod purchase. _If you also purchased AppleCare, then your warranty is extended for technical support and hardware coverage for *two years* from the original purchase date of your iPod._

Central time not working?

I've got an issue with my MacBook running 10.6.8 and Google Chrome. My mail is 5 hours off, even though I have all of the time zones and time correctly set, in both Google and on the computer. I checked under WinXp which I run on the same machine, and all of the times are correct. What I noticed is that as I change time zones in System Preferences, anything other than Central Daylight Ti

Dear Lunchbox 1101,
Thank you for posting such detailed note of your issue and the steps to resolve it. My imessages have not been working since this morning either and I have Verizon. I wonder if this issue is carrier specific because my friend who is on AT&T is not having any problems. It started for me on April 9th first but resolved on its own but today it is still not working for me. I searched on google and there are notes saying that Apple was having system issues with imessages on April 9th and I wonder if it is Apple again today as well.

Sound buttons and mute switch not working

My iPhone 4 has no sounds through the phone speaker except when I play music. It works fine through a dock or bluetooth in my car.
Also, the side 'sound buttons' do not work. ie - when I switch the mute switch to either on or off (and it becomes orange) nothing shows on the screen, also when I push the volume buttons up or down, nothing comes up on the screen.
I have tried: turning it on and off, resetting it, cleaning the charging port with a dry brush, checking the settings to make sure it should be playing sounds, inserting head phones a few times.
I have recently updated to the new 6.1 iOS update, but it was doing this before I updated it.
I can't think of anything notable that happened when it started doing this a few days ago. Seems random...
Also, my iPhone has had sound problems before (speaker crackling and not working) but the side buttons still registered on the screen, and also I could fix it by charging it.
Anybody got any handy hints?? Cheers.

It's ok, I fixed it.
I got an iPhone 5. Bravo to apple for making me buy another one of their products.

Sound Blaster Z Speaker/Headphone switch not working

I have had my soundblaster for 6 months and everything has worked great.
After a recent driver update (I have already tried rolling back the driver) I found that my speaker/headphone switch does not work properly. It enables the headphones but doesn't disable the speakers. I use the optical out on my card and it has worked flawlessly until now.
Suggestions?

Remove the old drivers (carefully) in Safe Mode and install the new drivers in Normal Mode.

KVM switch not working on new mac pro

Why won't my Belkin KVM switch work on my new mac pro

Which way does it not work?
Can you boot up with the switch to the Mac?
Can you then switch to the other computer but not back?

Connection to switch not working

I'm having problems with connecting my UltraSPARC-IIi machine runing Solaris 9/64 to a SURECOM switch.
I think that the software configuration is ok, I managed to connect the Solaris machine directly to another machine running Linux without problems. However it would not work when it's connected to the switch.
I used 2 different cables that I've tested and works fine. Is there some special requirement from the Solaris ethernet card regarding the cable that is used?
During bootup i get this message:
SUNW, hme0 : No response from Ethernet network : Link down -- cable problem?

Well, you could try and add the hme patch for SunOS 5.9: 113226-05.
You could also try and force the interface to 100 MB/FDX (if your switch supports it).
If you have several interfaces, start with
ndd -set /dev/hme instance <instance>
For hme0:
ndd -set /dev/hme instance 0
ndd -set /dev/hme adv_100fdx_cap 1
ndd -set /dev/hme adv_100hdx_cap 0
ndd -set /dev/hme adv_10fdx_cap 0
ndd -set /dev/hme adv_10hdx_cap 0
ndd -set /dev/hme adv_autoneg_cap 0
7/M.

Central switching NOT work.

Similar Messages

Maybe you are looking for