Central System Administration in Workcenter - Remote Logon Issue

Hi,
We have a problem in our Solution Manager and we would like to know if is possible to fix it.
We have configured Central System Administration correctly for our satellite systems. We have configured some tasks and we are able to do remote logon to run some transactions in the stallete systems.
The problem comes in the Workcenter via web. In the workcenter we access to the Central System Administration and when we try to do remote logon to the satellite system nothing happens.
Anyone knows if it is possible to do remote logon to the satellite systems using workcenters?
Thanks,
Roberto

From the transaction SOLMAN_WORKCENTER, navigate to the System Administration tab.
From the menu on the left select the task "Administration Tools".
Select your system from the table on the right
At the bottom of the screen you will see "Details for system <SID>"
Select the client and the RFC from the drop down menu.
You should see a list of Tools for Application Server with corresponding TCODES. If your selected RFC is functioning properly and the user ID specified in the RFC has the correct authorizations you should be able to log on remotely by clicking on the link provided.

Similar Messages

Unable to switch Central System Administration into Change Mode

Hi,
I am bit rusty on the Solution Manager - Central System Administration.
While experimenting with my Solman system I did the following.
1. Logged into Solman and started transaction Solution_Manager
2. Switched to the Solution that has been configured and then followed Operations Setup->Solution Monitoring -> System Administration -> Central System Administration for <My System> (here my system is the system I wish to monitor).
3. After following the navigation to the selected item as described in step 2, I selected the menu items Session Components->Complete.
4. After this action of selecting the Complete session from the menu, my Central System Administration for <My System> is continuously showing Display Mode.
I am unable to switch back the system to Change Mode.
Am I missing something ? What needs to be done ?
Regards,
Siddhesh

Siddhesh Ghag wrote:>
>
> 3. After following the navigation to the selected item as described in step 2, I selected the menu items Session Components->Complete.
>
> Regards,
> Siddhesh
This was the wrong step. By setting the Session Component to "Complete", no further changes are allowed (and you receive a pop-up).
The procedure to reopen the session component is not documented for customers. Please create a customer message on SV-SMG-MON-CSA, open the service connection and provide logon information.
You might state my name in the message, I will then assist the message processor.
Best regards,
Ruediger Stoecker

Central System Administration - Monitoring question

We are trying to setup the Central System Administration/Monitoring in solution manager. However, when we go into the setup of the tasks, such as "Checking for ABAP Short Dumps", when we click on the "Start ST22" button, it doesn't do anything.
Has anyone had an experience with figuring out how to get those buttons to work and to connect directly into the system we are doing the task?
We did follow Note 128447 to setup the Trusted RFC's between the systems, but that doesn't seem to working correctly either. Could that be the reason that this isn't working correctly?
Thanks in advance for any replies.
Dale Dingmann

Hi,
May I know how did you configure your CEN monitoring, using agents, or using RFC.
And where you are checking the ABAP dumps on Workcenter?? will you able to get the other details like Job failure, if you click that, wil you able to reach the satellite system.
and check below are available.
SM_<SID>CLNT100_READ
SM_<SID>CLNT100_TWM
SM_<SID>CLNT100_TRUSTED
if you use RFC monitoring these 2 also required,
<SID of the monitored_system>_RZ20_COLLECT
<SID of the monitored system>_RZ20_ANALYZE
Thanks,
Jansi

Not able to find Central System Administration

Hi,
We are trying to configure the Central System Administration in our Soultion Manager version 4.0 for the Development server running on ECC 6.0.
We have created systems, generated RFC's, defined logical system and and also created Solution Landscape for the Development Server in the Solution Manager System.
But when we go to the transaction DSWP>Eneter the Development Solution Landscape>Solution Minitoring>System Monitoring/ Administration>Operation Setup, We rae unable to find the Central System Administration configure icon.
Please suggest the possible reason for this and a way to view the Central System Administraion configure Icon.
Thanks and Regards,
Abdul Khyoom A.

Hi Abdul,
CSA Setup should be visible via this path:
- dswp
- open solution landscape
- choose Operations Setup -> Solution Monitoring -> System Administration
- here you should see for each system in the Landscape an entry for: Central System Administration
What's the Support Package Level of you SolMan system?
Best regards,
Ruediger

Solution Manager - Central System Administration - Task list is wrong

Hi,
Solution manager 7.0 EHP1, System monitoring, Central system administration I have copied another customizing session,
updated task list but strange mixed list of tasks appeared: some tasks are visible even they do not exist in new one.
Thanks for help.
Dalibor

>
Dalibor Cip wrote:
> Hi,
> Solution manager 7.0 EHP1, System monitoring, Central system administration I have copied another customizing session,
> updated task list but strange mixed list of tasks appeared: some tasks are visible even they do not exist in new one.
> Thanks for help.
> Dalibor
Have you already seen
[SAP Note 1097862 - Incorrect no. of tasks in SAP Solution Manager overview|http://www.service.sap.com/sap/support/notes/1097862]?
It contains also instructions how to fix inconsistencies.
Best regards,
Ruediger

Mail a Central System Administration report

Hi,
We are started with the configuration of the CSA (Central System Administration) on Solution Manager.
Each check session is available on a HTML and/or MSWord report.
Now I want to mail these report to a mailbox on a regular basis.
I wonder if that is possible.
I cannot find any information about that.
The SAPConnect (SCOT) is well configured.
Hope somebody can help me out
Thanks
Paul

Did you ever get this working? Also have you found a way to combine CSA reports from multiple systems into one report perhaps?

Auto email Transmission for Central system administration

Hi Experts,
I want to setup an auto email transmission for "Central system administration" report in solution manager.
If anyone aware of the process, please guide.
Thanks,
Basis Consultant

Hello,
To setup CSA you will need to perform three important pre-requisites if you already have not done so.
> Create a Solution Landscape
> Setup the RFC connections between Solution Manager and the Satellite systems in your Solution Landscape
> Assign the Solution Monitoring Roles to the users.
In terms of the Automatic Email Notification it is currently not available as a standard functionality.
Thanks,
Mark

Solution Manager: Central system administration

Hi,
We need to configure central system administration in solution manager.
Could you please provide step by step documents.
Regards,
Bala.

Hello Bala,
You should find this link useful [Here|http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm]
Hope this information is helpful.
Regards,
Paul

Can Central System administration be configured for JAVA systems?

I know, we can configure Central system administration (DSWP -> Solution -> Operations Setup) for ABAP and ABAP+JAVA systems.
Can some one tell me, can it be configured for JAVA systems like Portal?
Thanks
Aditya

Hello Aditya
Unfortunatelly Java only systems are not supported by CSA in EHP1. The CSA infrastructure is currently being overhauled and as a result of this, pure Java systems will also be covered starting with the next release of SAP Solution MAnager (SAP Solution Manager 7.1) The availability of this next release will be this year, but I am not yet sure when exactly. You can check further info in www.service.sap.com/solutionmanager -> in the last line of this page there is a link to get detail about this version Ramp-Up.

Central System Administration

Hi,
I have added all satellite systems to Solution manager .Please tell me the steps to configure Central System Administration in solution manager.
Thanks & Regards
Shashi Singh

Hi,
Check these
https://websmp201.sap-ag.de/~sapidb/011000358700000059822008E
https://websmp201.sap-ag.de/~sapidb/011000358700006932602005E.sim
https://websmp201.sap-ag.de/~sapidb/011000358700000038202008E.sim
https://websmp201.sap-ag.de/~sapidb/011000358700000038182008E.sim
This should solve your problem.
Feel free to revert back.
-=-Ragu

Central system administration (CSA) in solution monitoring

Hello,
I want to configure my solution manager for central system administration (CSA) which is a service provided under solution monitoring of transaction dswp.
I couldnt find any documents for this configuration.
Could you please help me out..
Regards,
Gurudath Pai

Hi Gurudath,
If you have an s-user id, step-by-step tutor files with screenshots are available at
https://service.sap.com/rkt-solman > Solution Manager > Solution Manager 7 > Technology Consultant & System Administrator > System Monitoring, Administration
Before configuring CSA, you have to:
1. Perform basic settings for Solman (use wizard based approach)
2. Setup the system landscape
3. Create solution
4. Now you can configure CSA
Revert if you need clarifications
Prasad

Problems to execute a task it plans in the solman from Central System Administration

Good evening,
I Have a solman 7.0 EHP 1 and my doubt is that I try to automate a few tasks in the solman across the dswp in system monitoring administration and once to have the productive environments, I puncture in the task and once inside when I force a test in start transaction that we find selected the task goes out for me the following mistake: Call of SP12 is not possible: Program/Transaction/URL cannot be called.
Thanks very much
Marcos A. Monzón

As MxG mention use SM36 for the same.
for help refer SAP document -
http://help.sap.com/erp2005_ehp_04/helpdata/EN/ed/a9bb3f8e236d3fe10000000a114084/frameset.htm
Best Practice is to search forum before posting a query.

Central system Administration : User defined task groups

Hello,
In SolMan4.0, you can define user-task-groups (e.g. for daily system checks). The definition and processing of those tasks, works.
But they are not visible in the overview screen of the solution.
If there is only 1 user-defined task left, the overview does not show any open tasks
Any idea's ?
thx
Steven

Hi Udo,
The frequency is set on 'every 3 days'.
We are on ST-400 SP4 (SP6 is not available I guess)
I only defined an entry in the tab 'defining User Task Groups'
and one entry in the tab 'Assigning User Tasks'
The user task itself is visble as 'open' in the list, but not in the overview of the systems (icon with a red + sign)
As I work through the tasks, the red +sign changes into a green sign, at the moment that there is one user-defined task left (all the other 'sap'-tasks are 'done').
regards
Steven

Regd-System Administration issue

Hi Gurus,
I have configured Central System Administration in Solution Manager and the "Open tasks" are available. If i click on the open tasks, it takes me to the configuration screen and from there if i click on ex: "Start DB12", actually it should take to the respective satellite system. But in my case, it is not taking to the satellite system. Trusted RFC is working fine for all satellite systems.
Could you please let me know what could be the reason for this issue.
Thanks&Regards,
Vaishali.K

I forgot to mention one thing. I got this message once when i try to call SMICM. "Call of SMICM is not possible: Function module "/SDF/GEN_FUNCS_EXT_CALL" not found."
Thanks&Regards,
Vaishali.K

SM59 Remote Logon User Prompt 'pop up'

In setting up an R/3 system source system in BW Netweaver 2004s, through RSA1 seems the R/3 system will not logon to the BW system.
Tested SM59 remote logon with a Dialog user using the correct username and password, SAP_ALL, SAP_NEW, S.A_System etc. The logon screen option is not checked, but it 'pops up' prompting for a username and password. I have tried connecting with another BW 2004s system without issue, appears something specific with the R/3 4.7 version?
Also, have tried running a trace and it simply shows the last dynpro in the logon process.
Any insight or help in this would be great ! I'm stumped.

Hi,
We already had a similar problem :
Are you using a BI 7.0 system ?
BI 7.0 is based on netweaver 7.0 and passwords are case sensitive.
R/3 4.7 is based on wAS 6.20 and passwords are always converted in UPPER CASE.
Set the password of your BI user in upper case and R/3 will be able to use it from SM59...
Hope this helps,
Olivier

Central System Administration in Workcenter - Remote Logon Issue

Similar Messages

Maybe you are looking for