Central Web Authentication Fail - This device has not been registered.

Dear All,
I have problem when apply the cwa. i have wlc and ise,
I want all user (all type device) that want access to my network by Wifi, will authenticated by AD.
but user cant connect to network evenly only authenticate.
My ISE Authorization rule:
if
(Wireless_MAB AND AD1:ExternalGroups EQUALS example.com/Users/Domain Users)
Anyone, have experience like this before, please share..
nb : my ise licese is Base Package
Thanks!!

I had follow the configuration guide from here:
http://www.cisco.com/en/US/products/ps11640/products_configuration_example09186a0080bead09.shtml
but, my authentication always fail with redirect to device registration,
when user connect the ssid and input the username and password based on active directory,
then browser will show up like this :
1. Access with Windows :
Device Registration
This device has not been registered.
You need to manually configure your device. Contact your system administrator for assistance.
Your device configuration is not supported by the setup wizard.
Device ID        : my-workstation-mac-address-
Description     :
2. Access with Android
Device Registration
This device has not been registered.
You need to manually configure your device. Contact your system administrator for assistance.
Unsopported operating system type encountered.
Device ID        : my-android-mac-address-
Description     :
Thanks,

Similar Messages

ISE 1.2 Guest Portal - This device has not been registered.

I have setup and SSID on my WLC. I got the redirecting to my ISE guestportal working.
However when I sign in I get a Device regitration Page
"This device has not been registered"
Unable to obtain the user information needed for network access.
The device ID is grayed out and blank.
Any assistance in this matter would be greatly appreciated

Thanks Johnston,
P.S for those who needs the path ISE 1.2 Administration -> Web Portal Management -> Settings -> Multi-Portal Configurations -> DefaultGuestPortal -> Operations.
On another note
When I login - I get my acceptable usage policy.
Accept
Then get a Device registration Portal where I can add the MAC address.
Now I have two quistions.
When I add my test mac address the url redirects to myservername:8443/guestportal/AfterDevReg.action - unable to connect <- that's the one issue.
The other is - Can't I by pass the MAC? ie once the user is signed on to get access.
Curretly I have the following settings enabled.
Enable Mobile Portal
Allow guest users to change password
Guest users should be allowed to do device registration <- if I disable that after signon the page just flash back to the guest portal.

ODBC: This Datasource has not been Registered, Please register first!

Hi,
I just installed Oracle BI 10.1.3.4, and am going to demo the new interactive dashboard to my seniors. First I need to have a database to connect to, so I go to the ODBC client to define a data source. Now I'm stuck here: Under File -> Open DataBase and get the following values to fill out:
DSN:
User:
Password:
Database:
I'm trying to connect to an Oracle database, so under DSN I choose 'ODBC data sources', but get this message everytime: ODBC: This Datasource has not been Registered, Please register first!
It doesn't matter whether I fill out the other fields or not. What's the issue?
All help apprecitated.
Thanks!

First and foremost: "BI 10.2.x"? BI EE hasn't reached beyond 10.1.3.4.0 yet.
Secondly: if you want to access an Oracle data source it's easiest to go over a TNSNAMES entry. Just install an Oracle client locally.
Alternatively, if you want to create an ODBC connection...that's got nothing to do with OBI, that's an OS topic. Assuming you're on a Windows box, it's the "odbccp32.cpl" which normally resides in C:\Windows\system32 that you're looking for (as you say you can't find it in your start menu).
Easy way: windows key + "R" (or Start --> Run...) --> odbccp32.cpl
Hth,
C.

I keep getting an error message when I plug my iPhone into my computer. It says, "This iPhone cannot be used because the Apple Mobile Device has not been started." This has never happened before when I plugged it in - now the iPhone won't show up at all.

Someone please help! I do not know how to fix this. It keeps saying my Mobile Device has not been started and I can't get my phone to show up in the iTunes window AT ALL. It will charge while plugged in, but it just won't come up in iTunes.

Sorry, the error message should read, "...the Apple Mobile Device service has not been started."

"This message has not been downloaded from the server" - Multiple devices all using Exchange Active Sync

We are having this issue across multiple IOS devices ranging from IOS version 5.x up to the latest 6.1.2. Many (not all) emails sent to the devices are unreadable and simply state: "This message has not been downloaded from the server". Microsoft believes this to be some sort of bug with the IOS devices in the way they are handling the SSL encryption.
Facts:
- Devices are connected to an Exchange 2010 SP1 Rollup 6 via Active Sync (No POP3, IMAP or SMTP)
- issue occurs on multiple IOS devices within the organization ranging from IOS 5.x up to the latest 6.1.2
- Issue occurs on both external cellular data and internal wireless networks
- Not all emails sent to the devices result in the error, but issue does tend to occur more frequently from certain senders/domains
- Using the same user account on an android phone does not result in an issue (even when receiving the exactly same email that has been sent to the IOS devices)
- Closing mail app / rebooting device does not resolve the issue
- Doesn't appear to matter what the mesage format is (can be html, plaintext, etc)
- Spent nearly 7 hours with Microsoft going through the Exchange server configuration and looking for possible causes. None have been found and all testing indicates things are setup correctly.
- This is not a case of Issue 2.3 listed here: http://support.microsoft.com/kb/2563324 (verified by Microsoft Support)
- If we disable SSL on the IOS device and connect via plain HTTP the messages are displayed correctly!
- If we use a different SSL certificate, the issue still occurs - so not a problem with the original cert.
Does anyone have any suggestions on what would cause this? Does the ISO devices have any sort of log that would indicate why it's reporting this error? The current error is pretty unhelpful.

GFI Have a solution for this problem. It is to do with iOS implementation of reading the message headers when SPF compliance modifications are made by GFI.
http://kb.gfi.com/articles/SkyNet_Article/Error-This-message-has-not-been-downlo aded-from-the-server-when-downloading-messages-to-an-iOS-device?retURL=%2Fapex%2 FSupportHome&popup=true

Occasionally my iPad 2 does not download POP3 emails with the error "This message has not been downloaded from the server"

The error is "This message has not been downloaded from the server". I used to get this sometimes on my iPhone 3G too. The messages can be downloaded by a PC client or GMail or another type of smartphone. The
Chris

My question, which I thought was obvious, was has Apple got a workaround for this obvious error in their IOS email client. It hasn't been fixed and it's about time it was.
The fact that this problem :-
1. Manifests itself on both iPhone and iPad devices
2. Does not show up on Windows clients (Outlook 2007, Outlook 2010, Windows Live Mail, Becky 2)
3. Does not show up on web clients (GMail, Pobox, Hotmail)
4. Does not show up on MacOS clients
5. Does not show up on Android clients (Mail, Touchdown)
Leads to the inevitable conclusion that the problem is not device related (so I agree with you there) but is client / platform (Mail or IOS) related. The fact that more research on this forum shows that this issue has been around since IOS 1.0 days corroborates this conclusion.
I do not agree with you presumption that the issue is with the message, all the evidence above refutes this.
So here I am on the official Apple discussion forum seeking enlightenment and assistance from the combined knowledge of the assembled technorati. And quite frankly your terse, bad tempered message falls way short. If there were an "unhelpful answer" button on your message I would have pushed it.

TS4036 I recently got the new iPhone 5c I used icloud to back everything up from my 4s to my new 5c. Now, I keep getting a pop up that says Continue Restoring? (This iPhone has not been backed uprecently because it has not finished being restored. Would

I recently got the new iPhone 5c I used icloud to back everything up from my 4s to my new 5c. Now, I keep getting a pop up that says Continue Restoring? (This iPhone has not been backed uprecently because it has not finished being restored. Would you like to finish downloading any remaining purchases and media before backing up, or delete them along with any app date?)
I seleted to finish downloading because I didn't want to lose anything. It still will not finish downloading and I have tried this several times.
What do I need to do to that I can get my iphone to back up and so that I can install the new iOS?

Hello there, Brandifoote24.
The following Knowledge Base article offers up an explanation of what you're error signifies:
iCloud: Understanding Backup alert messages
http://support.apple.com/kb/TS4576
"This iPhone has not been backed up recently because it has not finished being restored. Would you like to finish downloading any remaining purchases and media before backing up, or delete them along with any app data?"
This message is displayed if your iOS device has been trying to complete a restore for more than three days. This can occur if your restore has been interrupted due to network connectivity issues or some other problem occurs.
Being that this is the case, you would want to go back to the article it seems you were referred to us from and try to restore from your icloud backup again:
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/TS4036
How do I restore an iCloud backup if my device is already set up for use?
You'll need to erase all data and settings from your device, so first confirm that you have an iCloud backup to restore:
Go to Settings > iCloud > Storage & Backup > Manage Storage, then tap the name of your device to view a list of iCloud backups.
Check the date of the backup you want to restore, because you'll be restoring only what iCloud backed up on that date.
After confirming that an iCloud backup is available, follow these steps:
Connect your device to a power source and make sure that it is connected to the Internet via Wi-Fi.
Follow the instructions for restoring your iOS device from an iCloud backup, which include making sure that your device is using the latest version of iOS.
If the issue persists, then I would troubleshoot Wi-Fi using the following article:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I updated my iphone 4S with iOS 6.1.3 and now my e-mails say, "This message has not been downloaded from the server". We have an Exchange server at work. ??

I updated my iphone 4S with iOS 6.1.3 and now I cannot retreive or send my e-mails. We have an Exchange server at work. I still receive the e-mails on all my devices just fine and I can see the subject headings & a small portion of the body of the e-mail, but when I open the e-mails there is no body and it reads, "This message has not been downloaded from the server". Very aggrevating and is not helping my business at ALL!! Same has happened with both iPads we own now.

Delete then add back the exchange acct on each device.

TS4000 I have been away for 2 weeks and a message appears on my iPad which is preventing me open my iPad. "iCloud backup. This iPad has not been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked and connected to Wi-Fi" Help?

I have been away for 2 weeks and a message appears on my iPad which is preventing me open my iPad. "iCloud backup. This iPad has not been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked and connected to Wi-Fi" Help?
What do I do to get rid of this message as it is preventing me accessing the iPad or closing it down?
Thanks
AndyNess59

Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until your device restarts, so you will be able to use your device again. Finally, open Settings > iCloud > Storage & Backup, and make a backup. The device will be backed up when it's plugged to the charger and connected to your network

TS4036 iCloud Back up Error This iPad has not been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked and connected to Wi-Fi. I am unable to shut off my iPad or even do anything on it. It will not let me get past this error.

I have an Icloud back up error. It will not let me shut off the device or do anything. It is locked. The error is: This iPad has not been backed up for 2 weeks. Backups happen when it is plugged in, locked or connected to Wi-Fi.
Please help me get this working again.
Thank you.
Beno Plumbing

Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until your iPad restarts, so you will be able to use the iPad again. Finally, open Settings > iCloud > Storage & Backup to make a manual backup

HT4859 I keep getting a MSG that my device has not been backed up. Going thru manage iCloud I see ther are two backs (one for cell and iPad). They both say "incomplete ". If I delete them cloud backups will stop and I assume I will need to go back to the

I keep getting a MSG that my device has not been backed up. Going thru manage iCloud I see ther are two backs (one for cell and iPad). They both say "incomplete ". If I delete them cloud backups will stop and I assume I will need to go back to the control.
Has anyone else experienced this?

After deleting the backups, go back to Settings>iCloud>Storage & Backup and make sure iCloud Backup is set to On (if not, turn it on).

JCOP Tools "This package has not been built"

Hello,
I'm using the Eclipse with JCOP Tools 3.1.1 and sometimes the .cap file is not built and the upload of the Applet fails when running the project
cm> upload ".../workspace.1j.../myapp.cap"
jcshell: Cannot read </../../myapp.cap>: java.util.zip.ZipException: error in opening zip fileThe "CAP File Properties" view in Eclipse says "This package has not been built" but I don't know how to force the build of the package. I tried to clean, manually/automatically build the project but it just won't get build :(
Any ideas ?
Thanks.
Tex

well nevermind, when this happens I just build the .cap alone:
cd myproject/bin
..../java_card_kit-2_2_1/bin/converter -out CAP -applet 0x01:0x02:0x03:0x04:0x05:0x2E:0x61:0x70:0x70 com.test.MyApplet com.test 0x01:0x02:0x03:0x04:0x05 1.0 Tex

Why can't I read my emails from my iPad mailbox on my iPad today?Each message is replaced by the comment "This message has not been downloaded from the server."thank you

Why can't I read my emails from my iPad mailbox on my iPad today?Each message is replaced by the comment "This message has not been downloaded from the server."thank you

In which case, clearly communicating the intent would have been a better solution. The steps do apply. A more appropriate response would have been "tried that, no change".
Regardless of whether they fixed the problem or not, they do apply.
If English is not your native language, I would strongly encourage you to post in your native language going forward.
If basic troubleshooting has not resolved the issue, the next step is to take the device to Apple for evaluation.

Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage. How can one fix this problem?

Regarding iMessage, when i want to send text to a person in my contacts app, i've been getting a message saying the number has not been registered with iMessage. How can one fix this problem? It works on the iPhone.

It takes two to tango, maybe it's your recipient that has weak Internet/Cellular connections.

Error Message "This Item has not been purchased"

I just bought a brand new computer with Windows 7 and I just downloaded Itunes. I couldn't remember my itunes password so I changed my password. After changing my password, I changed my Email address since I was using an old one I don't have access to anymore. After doing that I started trying to get my old purchases put on my new computer and maybe 40 songs downloaded before I got an error saying "This item has not been purchased with your Apple ID". These songs are listed in my purchased list, I bought them on my old computer and Itunes isn't letting me download nearly 300 songs that I paid for.
How do I fix this?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Central Web Authentication Fail - This device has not been registered.

Similar Messages

Maybe you are looking for