Centre and sub wrong? on nforce get nv swap
http://www.nvidia.com/view.asp?IO=nvswap_1.0
NVSwap is an NVIDIA utility designed to help you set up and optimize your NVIDIA nForce audio experience. NVSwap tests and configures the setup of a 4 or 5.1 speaker system attached to the following qualified NVIDIA audio products:
NVIDIA nForce2 with NVIDIA SoundStorm
NVIDIA nForce with MCP or MCP-D
NVIDIA nForce2 with MCP or MCP-T
Any NVIDIA nForce-supported AC' 97 audio codec.
Download the user guide below for full installation information.
NVSwap User Guide
Instructions on installing and using the NVIDIA NVSwap utility.
Duplicate post.
Jason
Similar Messages
-
How to get the values of all elements and sub elements from following xml
how to get the values of all elements and sub elements from following xml...
<?xml version="1.0" encoding="UTF-8" ?>
<List_AML_Finacle xmlns="http://3i-infotech.com/Cust_AML_Finacle.xsd"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://3i-infotech.com/Cust_AML_Finacle.xsd List_AML_Finacle.xsd">
<TransactionID>TransactionID</TransactionID>
<Match>
<Src_Matched_Field>Src_Matched_Field</Src_Matched_Field>
<List_Matched_Field>
<FSFM_Matches>
<NUMBER>NUMBER</NUMBER>
<TERROR>TERROR</TERROR>
<TU>TU</TU>
<NAMEU>NAMEU</NAMEU>
<DESCRIPT>DESCRIPT</DESCRIPT>
<KODCR>KODCR</KODCR>
<KODCN>KODCN</KODCN>
<AMR>AMR</AMR>
<ADDRESS>ADDRESS</ADDRESS>
<SD>SD</SD>
<RG>RG</RG>
<ND>ND</ND>
<VD>VD</VD>
<GR>GR</GR>
<YR>YR</YR>
<MR>MR</MR>
<CB_DATE>CB_DATE</CB_DATE>
<CE_DATE>CE_DATE</CE_DATE>
<DIRECTOR>DIRECTOR</DIRECTOR>
<FOUNDER>FOUNDER</FOUNDER>
<TERRTYPE>TERRTYPE</TERRTYPE>
</FSFM_Matches>
<OfacMatchDetails>
<UID>UID</UID>
<TITLE>TITLE</TITLE>
<SDNTYPE>SDNTYPE</SDNTYPE>
<REMARKS>REMARKS</REMARKS>
<ID_UID>ID_UID</ID_UID>
<IDTYPE>IDTYPE</IDTYPE>
<IDNUMBER>IDNUMBER</IDNUMBER>
<IDCOUNTRY>IDCOUNTRY</IDCOUNTRY>
<ISSUEDATE>ISSUEDATE</ISSUEDATE>
<EXPIRATIONDATE>EXPIRATIONDATE</EXPIRATIONDATE>
<ADDRESS1>ADDRESS1</ADDRESS1>
<ADDRESS2>ADDRESS2</ADDRESS2>
<ADDRESS3>ADDRESS3</ADDRESS3>
<CITY>CITY</CITY>
<STATEORPROVINCE>STATEORPROVINCE</STATEORPROVINCE>
<POSTALCODE>POSTALCODE</POSTALCODE>
<COUNTRY>COUNTRY</COUNTRY>
</OfacMatchDetails>
</List_Matched_Field>
</Match>
</List_AML_Finacle>avoid multi post
http://forum.java.sun.com/thread.jspa?threadID=5249519 -
I created a Group and put in all names and email addresses but cannot get the group to appear in an outgoing email message. What am I doing wrong?
This may help.
Can't connect to the iTunes Store
What happens whenyou try to connect? Error messages? -
Recently, when I hook up my iPhone to Sync, it goes thru and when it finishes I get the same message......The iPhone "......" cannot be syned. An unknown error occurred (13019). What am I doing wrong?
I dug a little deeper and found this:
It is the Voice Memos in the Playlist check Box. Uncheck it and re-sync.
It helped this time on my iTouch and my iPhone! At least this time. -
How to get Main meters and Sub meters in sap isu
Hi,
I have a requirement to collect number of main meters that linked with submeters.
Can anyone suggest me a table where i can get the main meters and submeters list.
Scenario :
A Premise may consist of more that one installation of same division.
Out of these one meter may be main meter.
And remaining all are sub meters.
All the installations under a premise we can get from EANL table by giving the premise input.
and now how the main and sub installations are differed out of these?
Is there any particular table that consists of a field which tells that meter is main or sub?
Thanks ,
RamyaHi Ramya,
Go through this link, it might be helpful.
http://forums.sdn.sap.com/thread.jspa?threadID=1417493&tstart=2310
Regards
Tarun -
Return document picking wrong main and sub transaction @ FPL9
Hi Mates,
I need a help to find out the reason why return document is referring with wrong main and sub in our current client.
Issue: when unpaid returns are posting with reference to payment document return document is posting by using main and sub transaction with previous cleared items.
Ex: 2000200 Invoice document - Main Transaction 0100 sub 0002
3000300 Payment run document - Main Transaction 0610 sub 0010
When return is posting with reference to 3000300 return document is referring 0100 and 0010, and new return document is updating with Billing and invoice text.
Usually if return document is posted that should be refere the payment document 0610 and 0010 main & sub and invoice document 2000200 should be open.
This is happening for all the main and sub cases and return document is referring with cleared items, in some cases it's posting currectly.
I have validated at return lot specific level, posting type=cancel payment.
some of business users are posted using posting type = new receiveble derived from payment.
Second case we found many issues with refeernce wrong sub, but even 1st case also system is showing same.
Kindly suggest.Hi Bogdan,
Thanks for the reply.
When SD invoices are transferred to FICA, the system checks whether entries maintained for account determination:
1. Maintain Account Assignment Data Relevant to Transactions
2. Derive Main/Sub Transaction from SD information
3. Derive Document Type from SD Billing Document Data
Thanks,
Kumar -
I got a new Ipad 2 and I am trying to get it work in vain. I have downloaded the iTunes on my PC, but even after executing the program nothing happens to the IPAD. I still get the image of the USB cable and the iTunes logo. What am I doing wrong?
You know that you have to connect the iPad to your PC with the cable that came with it - and then iTunes should start automatically and it will guide you through the set up process?
If you have already tried to connect the iPad - and you have launched iTunes - and you still have no luck - reboot your PC and then begin the process again. -
hi hello i bought adobe photoshop elements but when i typed my serial number in and push on install i get this - 1 fatal error(s), 0 error(s) can tell me someone what i did wrong ?
Photoshop Elements is not part of the Cloud, I will move this to that forum
Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements
Select a topic, then click I STILL NEED HELP to activate Photoshop Elements Online chat
-http://helpx.adobe.com/contact.html?product=photoshop-elements or
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements- premiere.html -
Get Sitecollection and Sub Sites Data Base Size Using PowerShell
Hi All,
Currently i am getting the Site collection database size using this powershell
$SiteCollurl = @{Expression={$_.url};Label="Site Collection URL"}
$size = @{Expression={[math]::round($_.diskused/1MB, 2)};label="DB Size in MB"}
$HTML = Get-SPSiteAdministration -Limit All | select $SiteCollurl, $size
So in this $HTML i am getting all the Site Collection Url's and DB size for each site collection.
Now i want to get the Sub Sites url and Sub Sites Database size also.
I tried like this "$HTML = Get-SPSiteAdministration -Limit All | | Get-SPSite -Limit All | Get-SPWeb -Limit All | select $SiteCollurl, $size"
I am getting all the sub site url's but Database size i am getting 0 for all sites and sub sites.
Can any one help on this.how to get the database size for all site collection's and sub sites.
Regards,
Phani.
Rhys W Edwards Where are you :)Hi
Please try the script below:
Get-SPSite -Limit ALL | ForEach {
$_ | Get-SPSiteAdministration | Select $SiteCollurl, $size}
I hope this helps. -
My phone has changed from the numbered keypad to the large lettered keyboard. When I enter my 6 digit passcode it tells me I'm wrong. I've tried about 6 times and don't want to get locked out. It just started today??? Please help.
carolinechx wrote:
i know the description may be a little bit too confusing
Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read. -
I plug in my iPad and make sure it is connected to the internet and locked. I still get "This iPad hasn't been backed up in (N) Days" What am I doing wrong?
Is the iPad plugged in to the mains ? You can force a backup via Settings > iCloud > Storage & Backup > Back Up Now
If the 'hasn't been backed up' message is stuck on the screen and you can't clear it then try a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider if it appears), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. You can then force a backup as above. -
I have tried to download a movie "Escape Plan" on my desktop, my laptop, and my IPad - I keep getting a message that I am unable to download the movie? What if anything am I doing wrong?
Message was edited by: edalexjrLaunch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the page that opens.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Click the Clear Display icon in the toolbar. Try the action that you're having trouble with again. Post any messages that appear in the Console window – the text, please, not a screenshot.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
I have iPad air, screen freezes after FaceTime call and cannot get back to home screen, have to power down and turn back on to get back to home screen. What am I doing wrong?
Hi RWD2,
Welcome to the Support Communities!
To resolve your issue with Facetime freezing when you end a call, I would try the first three steps in the article below.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If you are using Wi-Fi, it may be helpful to try these troubleshooting steps as well:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398?viewlocale=en_US
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings including previously connected Wi-Fi networks and passwords
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/HT4199
I hope this information helps ....
Have a great day!
- Judy -
Hey Folks...i'm totally ****** off !
^^
I canceled the update from Snowleopard to Lion by cleaning my keys ^^. Hit the wrong key i thing. Now i'm very weird ...only can start in Windows and dont know how to get my Lion Update now...Cant start in Mac OS X (Snowleopard) now
Please tell me what i have to do know
greets
< Edited By Host >Hello fuchs (guess), If you cancelled while downloading the 4GB Lion, no problem, download again. Snow Leopard should run (start holding the option key).
If you cancelled during the install process, I do not know. In this case you could try to start with the CMD + R keys pressed, and choose the restore, which may work if the creation of the restore partition of Lion has finished.
If that does not work, reinstall Snow Leopard with the CD (start holding the C key), after that download the Combo Update 10.6.8 to update the Snow Leopard completely, then redownload Lion (App Store, click "purchases" while holding the Option Key, find Lion, click "install"). If you want to have your own copy of the Lion installer, you have to copy the installer to a Memory stick or burn to DVD before you install, see else where.
Lex -
The airplay on my i pad works with music and pictures but I cannot get it to work with safari and mirroring. Can someone help me to get things working? Thanks!
As an IT person, I can put my hands up to the same difficulty. Then on double clicking on Home button, find AirTV symbol amongst Music control
Solved my problem having spent hours looking for a complicated answer. Well done Apple for hiding it so well.
Brian
Maybe you are looking for
-
Hi, Trying to deploy RPD thru EM, following standard procedure which I have been doing for long enough but now hit this issue, there is not much that I can understand in this any help would be appreciated: Message Supplementary information regard
-
Unable to save PDF - Internet Explorer Protected Mode "A file error has occurred"
Hi, I hope you can all assist! Here's the detail: Reader XI (11.0.06) and deployed as physical installation (.msi) Windows 7 x64 Enterprise Internet Explorer 8 & 9 Opening PDF's from HTTP & HTTPS locations Users are unable to save the PDF file to the
-
Hello All, I have a scenario where locking and unlocking a user in a specific child system has to be done through CUA. The TCode SCUM allows to do that. However, I'm looking for the underlying BAPIs corresponding to this TCode, so that my external ap
-
HANA SP Call in Crystal Report
Hi All , I need help to resolved my Problem . I have Developed HANA Store procedure when I call that store procedure in the crystal Report command Query I will give me error . Kindly help me . Call "SAPHANA".DD_PROC_SalesKPI_BySalesRepresentative
-
When is stricly equal not equal?
at the end of a lengty debugging session, I have this situation public dynamic class AA extends Array public function close():void { this[this.length-1] = this[0]; // if the array describes a circular structure, the last element def