Centre Cursor/Trackball does not open any folder when pressed

I have a Blackberry Curve. I think it's a 8520 but can't find out the actual model number as the centre cursor/trackball will not let me enter any folder when pressed. It will navigate but does not work or "enter" when pressed to open a file e.g. Cannot open text messages, Cannot mange connections, Cannot access Setup etc. etc. etc Tried re-booting several times. Phone goes through the usual set-up and verification as OK. Screen sticks on "confirm current date & time" as the centre cursor will not allow me to OK or edit.

The device has a physical keyboard? If so, you can navigate to the menu item with the trackpad and then hit the "enter" key on the bottom right of the keyboard. It looks like an arrow going down and to the left.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

Adobe Reader does not open any PDF when double clicked/hit enter once.

Adobe Reader 11 does not open when I double click/hit enter on a PDF document. I need to hit enter multiple times to open a document once. This ends up creating multiple AcroRd32.exe.
It's very annoying that I need to hit enter multiple times even to open a single PDF file.
This is how my task manager looks, even after closing any opened PDF file.
I've tried re-installing adobe reader multiple times, but same issue recurs again and again.
Please help.
Thanks,
Rahul

It worked. I don't see why the Protected Mode is enabled in the first place, if it were to cause issues.
Anyways, thanks Sabian,

Adobe Reader does not open any PDF when double clicked

I am using a Mac with Yosemite. When I double click a PDF to open it, it will not open. The only way it will open is right clik PDF/Open With/Applications/Adobe Reader app. or right click PDF/Quick Look. Thanks funnnyfarm

It worked. I don't see why the Protected Mode is enabled in the first place, if it were to cause issues.
Anyways, thanks Sabian,

Acer Aspire E5-511. touchpad/mouse move cursor but will not open any programmes other than McAfee,

Just purchased this laptop, initial thought it was a great improvement on my 3 year old Aspire!!! Latest problem after doing a complete scan with McAfee is the touchpad or remote will move the cursor but will not open any programmes other than McAfee. The Windows symbol (bottom left hand corner) does not light up when the cursor is over it and I am unable to use windows key + C to get charms bar. For background I have been unable to install windows updates since I have had this computer, two days, hence doing a scan to look for reasons.

Thanks for your suggestion Acer-Justin. Sorted it by a switching off/reset using keyboard. Sorted update problem using Microsoft who found a problem with update system then installed Windows 10 - all appears ok for now.

Powerpoint does not open any presentation

Problems with powerpoint presentations.
It does not open any presentation, but I can use the presentation with previsualisation program, so in the presentations there are any error, it looks like the program doesn´t respond.
Thanks for your answers. I really need to use it...so... thanks

Support for Microsoft PowerPoint

When I try to open Illustrator it opens Adobe Application Manager, but it does not open any window, why does this happens?

Hi I am trying to open Illustator CC 2014 but it only opens Adobe Application Manager but it does not open any window. It's on a mac. Please help!!

Hi Henry,
Can you please also confirm the Mac OSX version?
Regards,
Sumit Singh

Can not open any folder

can not open any folder on desktop

You have read pririlege for the folder?
Finder's Go menu -> Go to Folder... "~/Library/Preferences", then move to rash the file, "com.apple.finder.plist" then relogin could solve the problem.

Iphone 4 does not open any application it happened when i updated my iphone4 in my mac book pro

iphone 4 does not open any application it happened when i updated my iphone4 in my mac book pro

Install a free app. Click App Store app, find any free app you might like, install the app. If still problems, try a Reset, hold both Home and Power buttons until the iPhone restarts.

Motion 5 program does not open any more

It is only the second time that I am using program Motion 5 and I only see the first small screen : does not open any more.
Is there anubody who can help me ?

When you say first small screen I assume you are referring to the splash screen. If so you need to double click on a template or new project icon. You can also choose from the list of projects/templates on the left listing or choose a preset on the right. Just double click on what you want or select and choose open at the bottom of the window. Motion will then open for you.

HT201317 My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.

My photostream in windows 7 PC does not shows any pic. when i click on slide show it start showing me slide shows of pic but when i try to copy files i cant do as no photo is viewd in list mode. This problem has arised since IOS is updated.I reinstalled my icloud and checked if icloud sharing is ON. I can see pic in my photo stream in PC only in slide show mode. While in list mode it shows pics before i actually click on photostream folder. My phone memory is out becose of bunch of photoes. How do i copy my photostream photoes.

Hi all. I can’t tell you how to solve your iCloud 3.x issues. Heck, I don’t think they’re even solvable.
But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem. …without even a re-boot.
Log out of iCloud 3.0 and uninstall it.
Open My Computer and then open your C:\ drive. Go to Tools/Folder Options and click on the View tab. Select the “Show hidden…” radio button and click on OK.
Open the Users folder.
Open your user folder
Open ProgramData (previously hidden folder)
Open the Apple folder – not the Apple Computer folder.
Open the Installer Cache folder
In Details view sort on Name
Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
Right click on iCloud64.msi and select Install.
When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco. The pictures will be synched to the same Photostream folder as before the “upgrade”. Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
For those of you who hate to go backwards, think of it as attacking to the rear. Which would you rather have, the frustration of no synching or everything working on an older version?
Good luck…

The query does not reference any table when attempting to build the WHERE clause. (IES 00022)

Hi
I am getting below error.
The query does not reference any table when attempting to build the WHERE clause. (IES 00022)
This error is in Validating Measue object in IDT.
It is not throwing error for dimensions objects but only for measure objects.
My BO version is 4.1
Backend is Teradata 14.1.
Regards
Gaurav.

Hi
In the dimension/Measure definition, you can select the table. Find the below screenshot.
If you still getting the issue…Can you please share your screenshot, for better understanding the issue?

M127fn phone does not give signal fax when pressing 1,2,3

Hi, I am Marc and I am new to this forum. Kindly excuse me of any wrong doing on a prior notice. Thanks! I bought the HP M127fn 4in1 unit one month ago and I am still not able to use this unit fully. On my old fax, Panasonic KX-FP342, when the phone rings and I answer, I can make a normal phone call or press the fax signal button to give a fax signal if it is a fax. However, If I do not answer, the panasonic unit picks up the line and gives a fax signal automatically after 5 unanswered ringtones. With the HP M127FN, I am not able to do this procedure. For description, I have the HP unit connected to the wall outlet and 2 phones in my house. One of the phones is connected to the HP Printer extension port and the second phone is connected to another separate socket ( to the same phone number ). When the phone rings for 5 times and I dont answer, the machine picks up the line and gives a fax signal automatically ( which is the normal procedure). But, the problem is when I answer the line. When I pick up the line and the caller asks me to give him a fax signal, I press 1,2,3 ( i tried this using the normal line and the extension line ) but nothing happens on both lines. So i appologize to the caller and ask him/her to call again which is really annoying me since I get around 10 to 15 faxes per day. I want the unit to answer automatically give a fax signal ( regardless of the caller's type ) after 5 ringtones and I want to answer the phone and be able to give a fax signal by myself if necessary. Fax answer type = automatic, rings type = all rings, extesion phone line = yes, rings to answer =5. Please Help!!!!

Hi , Welcome to the HP Forums! I see that your HP Laserjet m127fn phone, does not give signal fax when pressing 1,2,3. I am happy to help! According to page 48 of your printer's user guide: LCD control panel 1. On the product control panel, press the Setup button.
2. Select Fax Setup, and then select Fax Recv. Setup.
3. Select Extension Phone.
4. Make sure that the On option is selected.
With this setting turned on, you can alert the product to pick up the incoming fax call by pressing 1-2-3 sequentially on the telephone keypad. Turn this setting off only if you use pulse dialing or if you have a service from your telephone company that also uses the 1-2-3 sequence. The telephone company service does not work if it conflicts with the product. 5. Press the Back button to return to the Fax Recv. Setup menu.
6. Select Answer Mode.
7. Select Fax/Tel, and then press the OK button. With this setting, the product automatically picks up all calls and determines if the call is a voice or fax call. If the call is a fax call, the product handles the call as an incoming fax. If the incoming call is detected as a voice call, the product generates an audible synthesized ring to alert you of an incoming voice call. 8. Press the Back button to return to the Fax Recv. Setup menu.
9. Select Fax/Tel Ring Time.
10. Select the number of seconds after which the product should stop sounding the Fax/Tel audible ring to notify you of an incoming voice call, and then press the OK button. Hope this information helps! “Please click the Thumbs up icon below to thank me for responding.”

Double Click ...folder does not open, any suggestions please

Hello,
A new problem surfaced today on Macbook Pro (Leopard) after I allowed the system software updater to run. Of course this could be pure coincidence as I did not notice the problem until working for half a day.
When I double click on a folder on the desktop it does not open.
So I Ctrl-click the folder and select "open." No problem, the folder opens.
Now when I double click on a folder within this folder it opens just fine. So the problem is confined to the desktop.
I log out and back in and the problem goes away, but comes back after I have been working for a while.
I disabled Spaces but it did not help.
Any suggestions would be most welcome.
Thanks.

I would say that this topic IS solved, unless the original poster was unable to use the solution (change the trackpad settings) successfully. I, for one, was able to, and boy am I grateful! This has happened across machines and operating systems for me, for years now, and finally I have a solution! Thank you for the helpful post(s) that helped me get my mac back on track!

N810 MAP does not open any more

I tried to download US map and got an error. After that Map does not open. Actually it opens and closes right a way with no error message. So I flashed new upgrade to device and the same behavior again???? After sw update the divice should be as it is from factory??
Any good ideas how to recover?
Thanks

I had the same problem (map download did not complete, map app. won't start then).
Using File Manager I deleted "map" folder on Internal memory card. Map app. then works, but of course *all* the downloaded maps are lost.

Hey...... my ipod touch 2g wifi dose not work.... it connects to the network but does not open any of the web pages or internet acess!! HELP ME???

Someone plz help me out with this problemm... My IPOD TOUCH 2G connects to the wifi network but could not open any of the web pages... i've tried SAFARI, FIREFOX, and OPERA.... nothing in wifi retrieves data!!! it makes me so angry...
possible reasons???? i've searched net.. and many of the people r having these problems... maybe with the ne iOS4.2.1
HELPPPPPPPPPPP????
...Fateh

- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Settings>General>Reser>Reset Network Settings
- The troubleshooting here:
iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
- Does the iPod successfully connect to other routers?

Centre Cursor/Trackball does not open any folder when pressed

Similar Messages

Maybe you are looking for