Centre speaker does not w
Hi i just bought the Creative Inspire 5. P5800 speaker system. I've got a Creative SoundBlaster Li've! 5. Digital soundcard. I've plugged in all the cables correctly, changed my Windows sound system setting to 5. surround and did the same on the Creative Speaker system application. When i test the speaker through the creative speaker application, all 5 channels will output correctly but if i open up any other application for movies or music, the centre speaker won't work. I've tried disabling my onboard sound chip (C-media), uninstalling codecs (heard AC-3 filters usually conflict with creative center speakers' output), and reinstalling all the creative sb li've! drivers. That still wont make any difference. I'm wondering if the cause is because i had to connect the center audio cable (the orange cable) to the digital output jack of the creative soundcard (but thats where it's meant to be, so... ). Can anyone please help. I sold my Creative 4. 4400 2weeks ago, and if the centre satellite of this P5800 wont work, thats really money wasted. My last option is to format, and reinstall everything properly but i doubt that's gonna work. HELP....... Thanks
Change your windows sound system setting?from 5. to default 7.. You may have go into the?SoundBlaster Li've! 5. speaker settings/control center to setup your speaker set to 5.. and to calibrate the speaker set.
Similar Messages
-
Hi i just bought the Creative Inspire 5.1 P5800 speaker system. I've got a Creative SoundBlaster Live! 5.1 Digital soundcard. I've plugged in all the cables correctly, changed my Windows sound system setting to 5.1 surround and did the same on the Creative Speaker system application. When i test the speaker through the creative speaker application, all 5 channels will output correctly but if i open up any other application for movies or music, the centre speaker won't work. I've tried disabling my onboard sound chip (C-media), uninstalling codecs (heard AC-3 filters usually conflict with creative centre speakers' output), and reinstalling all the creative sb live! drivers. That still wont make any difference. I'm wondering if the cause is because i had to connect the center audio cable (the orange cable) to the digital output jack of the creative soundcard (but thats where it's meant to be, so... ). Can anyone please help. I sold my Creative 4.1 4400 2weeks ago, and if the centre satellite of this P5800 wont work, thats really money wasted. My last option is to format, and reinstall everything properly but i doubt that's gonna work. HELP....... Thanks
That's definitely a hardware problem(drop then malfunctioned). If you've replaced the ringer/buzzer & speaker from original parts & it does works also, most likely contacts on mainboard or soldered parts been dislodge. An autorized Nokia Care Center could resolved your problem.
Knowledge not shared is knowledge wasted!
If you find it helpfull, it's not hard to click the STAR.. -
My iPad Prefs are set for the side switch to Mute; but the speaker does not mute when the switch is moved down.
That setting only works for system sounds like push notifications (emails and the like), some game sounds, keyboard clicks and things like that. If you want to mute all sounds you still have to turn the volume all the way down with the volume switch.
-
After the OS 6 update my speaker does not work. Volume control on the side does not adjust the volume either. My music plays but no sound comes out. Can someone help me with this issue? I've tried rebooting my phone but still no sound comes out. I currently have the 4S.
try to activate and desactivate the airplne switch a couple of time
-
Bluetooth speaker does not appear in "playback devices" list
I'm having trouble controlling my new Auvio HBT2000W speaker via bluetooth from my Y580 ideapad running Windows 8.1. They successfully pair, but the speaker does not appear in the "playback devices" to output my audio to. This may be related, but when in "devices and pritners", if I right click on the Auvio HBT2000W and select "control", the window that pops up (shown below) always closes after about 2 seconds. I have tried all the unpairing/repairing, restarting, etc.I've tried updating the bluetooth driver with the one posted on this website.I've disabled the "allow the computer to turn off this device to save power" on the Qualcomm Atheros AR8161 PCI-E Gigabit Ethernet Controller (NDIS 6.30)I've made sure that all "services" are enabled in the properties window for the Auvio HBT2000W.I've even tried the Windows troubleshooter... which of course says that everything is fine and working properly. Anyone seen this before or have any ideas?Thanks!
iPad not appearing in iTunes
http://www.apple.com/support/ipad/assistant/itunes/
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/TS1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iTunes for Windows: Device Sync Tests
http://support.apple.com/kb/HT4235
IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
Cheers, Tom -
Idea Centre K410 does not appear to have a NOVO button
Idea Centre K410 does not appear to have a NOVO button at all
Moderator Note; subject edited; post moved to hereHi Docol,
Welcome to Lenovo Community Forums!
I’m sorry to inform you that there is no NOVO button in your K410 Computer, but the OKR (One Key Recovery) menu can be accessed by tapping on “F2” key once turning on the computer until the Lenovo Rescue System open, then select OneKey Recovery. Below is the link to download the User Guide for the computer and refer page no. 20 for the steps to access and perform OKR.
User Guide for K410
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
Mini speaker does not show any light
My x mini speaker does not show a blue or red light at the side and now won't play and when I try to recharge it to the laptop it shuts the laptop down straight away, it's like it's just died, what to do
Hi,
The cable the came with the speakers to charge, is that a USB cable? If it is, test the ports with anything you can that's USB. Even better would be something that also uses the ports to charge from. Just to make sure the issue is not the port. If you have another port, then you can also try it through that.
It does really look like it's that speaker. Check those few things, if the issue only remains with that speaker. Then yes the speaker's essentially useless to you.
I hope this answers your questions.
Thanks for the reply.
I worked on behalf of HP. -
Speaker Does Not Work when i play music, video o make a call.
When i play my music, video or when i make a call, in my iphone the speaker does not work. I can make a call and have a conversation when i use hand free. When i change sounds in configuration the speaker does work.
Hello there, Armando.
The following Knowledge Base article offers some practical steps for troubleshooting issues with sound from the speaker on your iPhone:
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/ts5180
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
my speaker does not pick up sound when i video with my iphone or use the speaker, yet the voice recorder works? any ideas why? thanks
Speakers have never picked up sound.
Microphones record sound. -
When I switch desktops on iMac the speaker does not switch with it
When switching desktops, the internal speaker does not work from one to the other. I have to insert a ear piece end into the jack to get it to work....it is as if it is on mute when the speaker was working fine on the other desktop. I checked the settings for sound on both desktops and nothing appears amiss. What should I do? I can get it to work by inserting the end into the jack but it is annoying for it to be done everytime I switch to my desktop. I'm muted until I do!
Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back. -
My speaker does not work on my iPhone 5
when i'm talking on the phone, and decide to put the call on speaker, the button(function) does not work. As well, when I attempt to listen to my voice mail using the speaker mode, I cannot hear the messages....What is going on?
Tried resetting the phone, by holding down the sleep/wake button and the home button at the same time until the phone restarts? It did not solve the problem.
-
Just replaced iphone battery!! Please help!! Ear speaker does not work.
I just replaced my iphone 3g battery. It seemed to go smooth. Everything works normally except the ear speaker doesnt work. When i try to make an outgoing call i cant here it ring, but my phone will actually call another phone. Does anyone know what # that connector is labeled as on the motherboard or back of the screen? Any help would be much appreciated!!!!!
There may be a problem with the microswitch in the headset jack. Click on the following link for the Palm KB article regarding this issue.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=40427
If this procedure does not work then the phone will need to be replaced.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/pre/p100eww/sprint/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc. -
Screen appears frozen black, but siri speaks, does not respond to turn off
My iPad screen is blank, but siri speaks no coloured screen with various programmes, appears to be frozen does not respond when turning off IPAD Air 2 Wi Fi &Cellurar
Try to reset it. Hold down the sleep and home keys for about 20 seconds. If you see the silver apple let go and see if it reboots
-
My Iphone 4s' speaker does not work. Please help!
When I try to play music, put it on speakerphone, etc. it does not work.
If repeatedly tapping the speaker and mute buttons don't work, try plugging/unplugging some headphones. Usually the circuit logic inside will reset itself.
-
Bluetooth speaker does not connect automatically in windows 8.1
before the upgrade (?) to 8.1,if i turned on my bluetooth speaker,it automatically took over from the speakers of my laptop.No drivers,no further changes needed.
After upgrading to 8.1 i have to disconnect the speaker,connect it again,then set the speaker as my standard speaker.then it plays.every time again and again.
how do i fix this?Me too. It shows that it connects and briefly reads "Connected" and then quickly switches to "Not Connected". My Windows Phone 8, when trying to connect to Windows 8.1 PC via Bluetooth is doing the same thing and I
receive this both from the PC and the phone. My phone does successfully connect to my Bluetooth speaker, but not from the PC only from the phone. Has this been fixed yet and I missed it? One thing
I've learned while being a part of a smaller market share having had a Windows Phone for several years now, the solutions come quietly and sometimes go unnoticed. Only later will I find myself thinking, "Oh yeah it works now, they've created a solution".
Case in point: Red Laser stopped working then shortly thereafter there was the Eye icon available at the Bing screen that can scan just about anything that can be scanned. Is there a similar thing happening with my Bluetooth device drivers from my 8.1
PC and I need to manually push something? When there is a solution, will you please alert me and the rest of this thread? Thanks much in advance!
Maybe you are looking for
-
Error ERR-1002 Unable to find item ID for item "" in application "11501"
Hi All, I am new to Apex, still a beginner. Please need your help on this. We recently upgraded to Apex 4.1 from Apex 3.0. The database version is 10.2.0.4. I am getting this below error. Error ERR-1002 Unable to find item ID for item "" in applicati
-
I am trying to complete my TSA job application and it is a requirement to complete e-qip questions?
-
Logitech Quickcam Messenger [046d:08f0]
I was extremely surprised when the kernel gave me the illusion of plug and play, using the gspca driver for this device. Unfortunately the gspca driver only supports the 046d:08da cam with the same name. It looks like the actual driver to be used is
-
Is there any limitations on the value that the Application Context can hold?
-
Disk read error, and Disk Utility won't open
Have a PowerMac G4 dual 800mhz, with two hard drives. Mac OS X 10.3.9 is installed on HD1. I use HD2 for miscellaneous files. Using the Azureus bittorrent client, I'm getting "Error: Disk read error - Input/output error, read fails" in the Status col