Centrino Advanced-N 6205 and Windows 8 Connectivity Issues

Hi. I've been having issues with the latest Lenovo issued drivers for the WIFI card (Intel Advanced-N 6205) v15.05.7000.1763.
I have recently installed a fresh install of Windows 8 Pro on my W530 (2438CTO) and have been experiencing slow connections to Wireless networks with the default driver that Win8 installed (14.2.1.3) and decided to install the latest ones on the driver matrix (v15.05.7000.1763) however it caused a BSOD (with a particularly unhelpful message dead5002 message code - means nothing to me). As this the only change I made for several weeks was the WIFI driver I have regressed back to the old version and have not experienced the BSOD again.
Has anyone else got problems with this driver and has anyone got a solution to why I am having this long delay getting a wireless connection (regardless of the signal strength or network)?
Thanks.

NETwew00.sys version on my system: 15.5.4.45
Latest driver version from Lenovo support site: 15.5.3.43

Similar Messages

  • T420 - Intel Wireless and Windows XP issue?

    Has anyone else seen any issues with using the Intel Wireless Advanced-N 6205 card on Windows XP? I have a 4178-6UU and it will work for a while, then just stop receiving packets, but will not disconnect even though it doesn't work and I am no longer able to ping it.
    I have the latest driver available from Intel and Lenovo (14.0.1.2), and also the latest BIOS (1.22). Unfortunately, I have to have XP/SP3 on these T420's. Any suggestions or is anyone else seeing any issues?

    Have you solved this issue? If so how? I think I may have the same issue. I don't understand all terminology in the post such as "ping", so I can't be certain if it is exactly the same issue. Also I use Windows 7 Pro. However in certain locations but not all, my wireless capabilities are horrible. The same locations that worked just fine with my Dell E6400, that I recently switched from are not working on my lenovo T420 4178-6UU. The internet access is constantly loss and I have to reconnect over and over again throughout the work day. HELP!!!! (SN: This keyboard is the best I have ever worked on, I don't think I will ever buy a different kind of PC, that is if I can resolve this wireless issue).

  • Lion, Boot Camp and Windows 7 Issues

    Couple of questions regarding Lion, Boot Camp and Windows 7... I never had issues with Snow Leopard and setting up Windows 7 on my iMac (expcept the dreaded black screen after restart, bu got that fixed)
    Let me start off with my specs and then I will ask my questions:
    iMac 27"
    i7 Quad Core (1st gen)
    16GB Ram
    1TB HDD
    OS X Lion (Fresh Install - Not Upgrade)
    All updates for OS and iLife and other installed software:
    Adobe Creative Suite CS5
    MS Office 2011
    Boot Camp 4.0
    Window 7 Ultimate
    Ok... here are my questions.
    When I fixed my black screen issues after installing a fresh copy of Windows 7 - I had to install MacFUSE and Tuxera NTFS in order to delete the the stock ATI driver so the second rebot on the install of windows 7 would work and boot correctly. After rebotting into my mac side I now always get this message from Tuxera.
    What does this mean? Now in the finder when looking at the computer drives.. It does not show the BOOTCAMP partition...
    However, when I resart i can hold down the ALT key and get this menu:
    I know this might seem strange to ask, but why are the Macintosh HD and the Recovery HD text smoothed and the Windows text not? Being a design I see the difference and it makes me wonder why this is. (It is almost like the BSOD icon apple used forwhen connecting with shared PCs)... Anyways, I can boot into windows when clicking this drive.
    After getting to windows 7 it will not let me run updated. The OS is activated and I have even installed SP1 manually, but it always tells me that the Update service is not running. When in fact it is. I have checked it and it is set to start automatically. I have reset and shutdown my computer more than 10 times... I can't figure out what the issues are.
    Overview:
    Why do I get the Tuxera NTFS error?
    Why can I see the boot camp partion when manually selecting it form startup, but it does not show in OS X
    I can't get Windows to update? Any ideas?
    Thanks for any help you can provide.

    These various utilities like Tuxera are incompatible with Lion. Partly because MacFuse is incompatible. You need to remove them completely.
    As for the Windows partition you might consider using Boot Camp Assistant to remove it. Then make a new partition and install Windows. Remember to use the Windows formatter to format the Windows partition NTFS.

  • WAP2000 and iPhone connectivity issues?

    I have several WAP2000 (Firmware 2.0.0.5), and while they work fine for PC's, iPhones, iPod touches cannot connect to them.
    Well, they connect briefly, get an IP address from the router, and immediately drop the connection to re-connect again.
    I have tried changing channels, eliminating all but one of the AP's, and so forth.
    Has anyone else had issues with this firmware?  I see posts where people are saying their iPhones connect up fine.  This happens on versions 3.x and 4.x of the iphone O.S.  It's not limited to one iphone or ipod touch; we've tried several.
    If anyone else is running 2.0.0.5 of the firmware and they are having success with an iphone, can you please tell me your settings?
    Thanks in advance!
    --Greg

    Greg,
    I think I have the same problem but with a Blackberry Storm 2.  (I posted in the last two days--Look for WAP2000 and Storm 2)  I see the Storm 2 connect successfully to the WAP2000 but then never establish a connection to the Blackberry Enterprise Server (BES)...Necessary to do anything useful with a Blackberry device.  A few months aga (Before I had my Storm 2) I had borrowed an iPhone for a week.  During that time I tried to use my WiFi but it never seemed to work (ie Established a WiFi link but then couldn't do anything else with it.).  Since I didn't have it long and WiFi wasn't the object of my testing I ignored the problem.  Now troubleshooting my Storm 2 problem and realizing that other WiFi devices on my network have been experiencing issues (the Storm 2 appears to have been most impacted) it is very likely that the iPhone I borrowed was experiencing the same problem.
    You can read my previous post but a quick summary--> When I used a packet analyzer (Wireshark) I saw that my router was issuing ARP address discovery broadcasts to the Storm 2's IP address but the Storm 2 was not responding.  I had tested the same setup with a different wireless access point (Linksys WAP54G) and saw the Storm 2 properly respond (and the Storm 2 worked perfectly when connected to the WAP54G).  I concluded that the WAP2000 was either not forwarding the ARP broadcast to the Storm 2 or it was not forwarding the Storm 2's response back to the LAN.
    I created a work around the now allows my Storm 2 (and multiple other devices) to function successfully on the network.  I have a Cisco ASA5505 firewall that has a ststic ARP table and is capable or proxy-arp (ie.  It can respond to ARP requests on behalf of devices on the network).  I simply created an entry for my Storm 2 and now it functions properly.  I also had a laptop and an IP security camera that had intermittent connectivity issues.  When I added static ARP entries for these items their problems disappeared as well.
    I don't think this is a settings issues so I am hoping Cisco confirms this as a bug and issues a firmware update.
    I hope this helps.
    --Gerhard Wittreich

  • MSI-KN8 neo4 Plat and windows booting issues...please help!!!

    let me start with my system specs:
    msi- 7125 plat KN8 (1B0 bios)
    amd 64 3500 venice
    1 GB (2 x 512 MB) corsiar valueselect (set at 2.5V)
    antec neopower 480W
    gigabyte nvidia 6600gt
    (2)  80 GB maxtor sata150
    250 GB maxtor sata150
    zalman 7700 series cpu fan
    sony dvd burner.
    Thanx in advance for any and all help i am, hopefully about to receive.  i read quite a few of previous threads and didnt find one with my issue.
    HERE GOES...
    this entire system was running with a different brand mobo (just upgraded to this msi-7125) and was running great!!
    however when i installed windows xp media center edition 2005, things where working great.  that is until i installed the nforce system drivers from the disk that MSI provided me. once i installed the ethernet driver,ide-sw driver, network controller the ask me for a reboot after install was done,  when the system restarted i got all the way the windows xp splash screen or loading screen.  at that point windows stops loading stays on the loading screen for about 10 minutes, then the computer shuts off.
    i have tried running memtest and had no errors, im positive that my psu is capable of handling my components.
    i'm really stuck on this one, any help would great thanx again!!!
    Sam

    You should be able to get into Windows through safe mode. From here uninstall the drivers and restart. You should hopefully be able to get into Windows normally now. Get hold of the latest drivers from the Nvidia web site and try them.
    Also check both Ethernet controllers are enabled in the BIOS.

  • New hard drive and Windows 7 issues

    I bought a new 1 Tetra Samsung hard drive for my computer since 150GB was not enough. I did this because I need windows partitioned for school. After I installed the hard drive and inserted the Mac OS disk, it would not recognize the hard drive to install. Since then, I have read previous forums such as: https://discussions.apple.com/thread/3322843?start=0&tstart=0
    Now, the issue is: I went ahead and installed my Windows XP SP2 because I could not get Mac OS to install. I have also downloaded the Windows 7 Professional update from Microsoft and have a Operating Disk on its way in the mail. I am having some issues with sound and camera and probably others that I don't know about yet, like my graphics card and such. What should I do?
    1. Erase HD and install the Mac OS, because I do want this on my computer. Then download updates for Windows 7 bootcamp and reinstall Windows 7 when I get it in the mail.
    or,
    2. Is there a way to fix the driver issues that I am having without having to reinstall windows. I have not tried to partition yet and install mac.
    I think it would be best to:
    Install Mac OS
    Download updates
    Bootcamp and Install Windows 7
    What do you think and do you have any advice as how I should go about this. Oh, btw, living in a PC world and coming home to my Macbook Pro 3,1 and realizing that it is not as functional is kinda disappointing.
    So, I found this site for the sound: http://www.stuffedcow.net/macbook_audio
    And: http://www.cirrus.com/en/products/cs4207.html
    I am not sure how to go about installing a new driver. Do I download and save or do I run a certain .exe?
    I found this post and was reading, but I am not certain about the right driver for the sound. If I erase the hard drive and install mac. Then, bootcamp and install windows, will I loose my wifi driver? Windows 7 should have that update, but according to this post, it may not.
    https://discussions.apple.com/thread/2534313

    If I were in your shoes I would want to understand why I couldn't install OSX on the internal drive before going any further. Without getting past that hurdle you may or may not be successful in your aims, but you are outside mainstream intended ways of running Bootcamp.
    Just a couple of starters:-
    1. Is your internal hard drive (samsung) formatted with a GUID partition table and HFS+ file system? All done in Disk Utility, booted from the Install disk.
    2. The Apple Install disk (plus subsequent Apple Software Updates) has all the drivers Bootcamp needs, without having to find and download from elsewhere. I run Windows 7 64 bit on two Macs and have never had to go and find a driver. (Of course Windows does it automatically for me for other hardware). Sorry if this next point is insultingly obvious, but just to check that you know you can put the Apple Install Disk in while running Windows and Windows find the installer.
    You don't say anything what your MBP is or what version of OSX you are running. I am not fully up to date with the inplications of Lion and Bootcamp drivers as there is no install disk. I believe 2011 MBPs won't run XP.
    Your comment "Oh, btw, living in a PC world and coming home to my Macbook Pro 3,1 and realizing that it is not as functional is kinda disappointing" implies that you haven't had a Mac very long. Although Macs are easy to pick up and use, there is a LOT to learn about customisation and using it properly and getting the most out of them. I have a number of relatives who still use OSX "out of the box"....it's like driving a car in first gear, and complaining "this car doesn't go very fast". Not a perfect analogy as speed is not the issue here.
    Sorry if some of this post is missing the target...just take on board the bits that apply.

  • FMS3 and FCS Connectivity Issue

    When FCS and FMS3 connection takes place, i get following
    error in FCS's Machine regarding the FCS crash.
    "Macromedia Flash Comminication Server MX 1.7.1 r98 has
    encountered a problem and needs to close. We are sorry for the
    inconvenience.
    Error signature
    szAppName : FlashCom.exe szAppVer : 1.7.1.98 szModName :
    js32.dll szModVer : 0.0.0.0 offset : 000033c1"

    This is just a guess as I'm not a Transall user. My first guess is that your DSN will need to be made using the 32-bit ODBC driver. As a default, using Windows 7 or later, you created a 64-bit source.
    To create or modify a 32-bit DSN on 64-bit Windows, you must run C:\WINDOWS\SysWOW64\odbcad32.exe. You may find it useful to create a shortcut to this on your desktop or Start menu if you access it frequently. I believe the interface is exactly the same after that.

  • Database link and remote connection issues..

    We have a sql script... Large script that we would rather not post here. The script connects through a dblink to a remote site at the beginning and gets thousands of records. We then process these records locally which takes around 40 minutes. The link is unused for that time. Then the same script attempts to connect again through the dblink and set a confiirmation flag. But this final confirmation step routinely fails. The script used to work fine when the confirmation was at the beginning of the script.
    My understanding is that when you go out through a dblink it creates a session on the remote computer. The session stays active until the local proc ends or the session times out. Successive calls through the dblink from the same proc will reuse the same remote session? Is this true?
    So, Is the inactivity period possibly causing this dblink connectivity issue? We put some test sql select statements in the script here and there selecting from dual at the remote site to test the link inbetween major proc calls. Sometimes even these fail. What do I have to do to keep this link active? Is this even my issue?
    Like I said this script worked fine when the confirmation piece was at the beginning right before we start downloading files and basically no inactivity period... Now we download files and confirm at the end with a 40min to 2 hour inactivity between.
    The remote site as well as the network claim that they are not dropping us... The only piece of information I can provide is that on our side SQLNET.EXPIRE_TIME = 10 and on there side SQLNET.EXPIRE_TIME = 0. I've read that others solved this issue by manipulating this value.
    Here are some of the errror message we get in our script...
    ORA-03114: not connected to ORACLE
    ERROR at line 1:
    ORA-02068: following severe error from DMVAIS
    ORA-03135: connection lost contact
    Edited by: Mark Reichman on Nov 25, 2008 12:47 PM
    Edited by: Mark Reichman on Nov 25, 2008 12:57 PM

    What version of Oracle?
    What are the values of the following database parameters?
    open_links                       max # open links per session
    open_links_per_instance    # open links per instanceAny chance you are exhausting one or both these parameter values?
    Have you ran a check on the network connection between the two machines?
    HTH -- Mark D Powell --

  • Download and iTunes connection issues

    As of recently, I have purchased numerous audio and video files from the iTunes store with no difficulty or connection issues of any kind. Though today, I attempted to download the Iron Maiden: Flight 666 movie, and had issues with my download. Though the file is downloading, it is taking an excruciatingly long amount of time. A 3.09 Gigabyte file, a file which might have previously taken me about an hour to download on my connection, now displays an estimated download time of 17+ hours. It has been downloading now for at least an hour, and only 9.5 Megabytes have been successfully downloaded. Now, I am experiencing difficulty accessing the iTunes store at all. An error message continually pops up saying that my connection has been lost and the download pauses, though I have checked my connection time and time again. I have even contacted my internet provider, Comcast, in hopes of solving my problem. My connection is good, though iTunes itself is the only thing giving me difficulty. I have gone through all of the steps that Apple has recommended, and have not had any success in attempting to download the file. Any help would be greatly appreciated.

    Contact iTunes support.

  • BT Infinity and https connection issues

    I have sporadic issues with https connections on my BT Infinity service.
    I used to be on Virgin ADSL and had no issues.
    I can also use a Orange mobile dongle with no issues if I switch to that when experiencing problems with BT.
    Some example sites:
    Dixons checkout pages
    NatWest banking pages
    Anyone else experience this?
    Should I periodically reboot the HomeHub and VDSL?
    Cheers,
    Jason.

    Can someone on Infinity kindly do me a test and visit https://upgrades.o2.co.uk/index.htm and tell me if it's darn slow for you too?  It's not the site as I'm loading up VNC and connecting to a VPS in America and it's instantly loading. It'll definitely rule out traffic shaping if someone on Infinity can tell me either way.
    Thanks you generous souls!!!

  • Adobe acrobat pro 9 and windows 8 issues

    Looking for help regarding adobe acrobat 9 and windows 8.  I am unable to scan will  not allow me to select devise (HP officejet pro 8500 wireless).  Also unable to scan from HP device to PDF using HP solution center.  Printing fine from other applications. Thank you.

    lorrainetexas wrote:
    Also unable to scan from HP device to PDF using HP solution center.
    This means that your scanner software or driver is not correctly installed.

  • Dreamweaver CS3 and Windows 8 Issues

    I have Dreamwever CS3 and Windows 8 and I keep getting errors that can only be resolved by closing down DW and losing the work I have processed so far. I happens mostly when I use extentions such as Webassaist Data Bridge. I have visited their forum but they advised me to checkout you trouble shooting service.
    Please advise
    tonytanner257

    Hi,
    If Dreamweaver is working fine without the extensions, I am not sure if we should be troubleshooting Dreamweaver. Just to be sure, Windows 8 is not a supported version for Dreamweaver CS3. It could possibly work, but wouldn't have been tested on Windows 8 as Adobe supports only the previous two versions of any software.
    This is my best answer. You could wait for other experts for their opinion.
    Thanks,
    Preran

  • Windows 7 and internet connection issue

    I am having a problem connecting to internet on Windows 7 OS. I have a Macbook that installed Windows 7 on Bootcamp. When I connect the DSL wire to my computer in dormitory it connects automatically. But when I go to somewhere else it doesn't connect. I also tried to connect using IP address which consists of 4-5 rows of numbers. Unfortunately, I cannot find the tab where I can enter these IP address numbers. So I was wondering if there is something wrong with my Network Driver (or may be it is missing some networking drivers).
    The main reason I want to connect to the Internet in Windows system is because I need to activate Keyshot (which requires internet connection and it works only on windows platform). My teacher said if the IP system is different on the Windows installed Macintosh, then it may not activate the product. So I was wondering if my Windows networking system works differently from Windows system on normal PC. If so how to fix this connection problem. Sorry if my question is too complicated.
    But again, I am able to connect on my windows at home. But this connection is still not allowing me to activate the software. As I understood, this program requires normal internet connection of Windows. I don't know what is wrong with my computer.

    Thanks for the direction. Did you mention the Bootcamp forum within this Apple.com or are you talking about a forum that exists outside of apple.com (maybe some website solely devoted to Bootcamp or windows issues)?

  • Windows 8 And Random Connectivity Issues

    Hello,
    I just relatively recently got a laptop with Windows 8 on it. I hadn't used Windows 8 before, but while some features are good, others are not. 
    Notably, when I put my computer to sleep and return from sleep, often times I need to unplug my ethernet cable or my pages won't 'load' because the network is unavailable. But my old laptop, with Windows 7, will be able to access the internet just fine and
    so it doesn't seem to be an ISP issue. 
    I thought it may be a Google Chrome issue, but IE and Firefox have similar issues, pages hang for a long time and eventually display 'page cannot be displayed' or some variant.
    As I said, sometimes if I unplug and re-plug my ethernet cable in, it resolves it, at least when I return from hibernation.
    Unfortunately, two or three times before, and now another time today, I'll be working on my computer and I'll go to a website and it will just hang, then if I try to reload or reload any other pages, I get a similar issue, the network isn't available. 
    I tried unplugging/replugging, I made sure the connection was fine by using my old laptop, and I even tried putting the computer to sleep and back, and closing Chrome and reloading, none of that worked. What did work was completely restarting, but this is
    inconvenient.
    I'm just wondering if anyone else has encountered these issues and if there are easier/more permanent fixes to them? They aren't /terrible/ but they are inconvenient and annoying.

    Hi,
    Have we tried the network troubleshooter?
    Open the Network troubleshooter by swiping in from the right edge of the screen, tapping
    Search (or if you're using a mouse, pointing to the upper-right corner of the screen, moving the mouse pointer down, and then clicking
    Search), entering network troubleshooter in the search box, tapping or clicking
    Settings, and then tapping or clicking Identify and repair network problems.
    For more information regarding wire and wireless problems in Windows 8/8.1, we may first take a look at the following tutorial:
    Wired and wireless network problems
    Best regards
    Michael Shao
    TechNet Community Support

  • Windows 8 bugcheck (133) on T430 & W530 with Intel Centrino Advanced-N 6205 AGN

    I have bought both T430 (Windows 8) & W530 (Windows 8 Pro) this ThanksGiving. I have seen both machines crashed when I waked them up from S3. I analyzed the crash dumps, all point to Intel wireless link driver NETwew00.sys.
    Repro steps:
    1. Leave the machine idle, let it go sleep (I did not customize the system power settings so far)
    2. Wake the system up
    3. Black screen for a while, then system restarted
    4. Check c:\windows\memory.dmp
    I live in an appartment building, lots of WIFI access points.
    Here is the crash dump analysis:
    (From T430 machine)
    0: kd> !analyze -v ******************************************************************************* *                                                                             * *                        Bugcheck Analysis                                    * *                                                                             * *******************************************************************************
    DPC_WATCHDOG_VIOLATION (133) The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above. Arguments: Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending  component can usually be identified with a stack trace. Arg2: 0000000000000281, The DPC time count (in ticks). Arg3: 0000000000000280, The DPC time allotment (in ticks). Arg4: 0000000000000000
    Debugging Details: ------------------
    DPC_TIMEOUT_TYPE:  SINGLE_DPC_TIMEOUT_EXCEEDED
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    BUGCHECK_STR:  0x133
    PROCESS_NAME:  System
    CURRENT_IRQL:  d
    LAST_CONTROL_TRANSFER:  from fffff801dda4b853 to fffff801dd8f1740
    STACK_TEXT:  fffff801`dcd05e08 fffff801`dda4b853 : 00000000`00000133 00000000`00000000 00000000`00000281 00000000`00000280 : nt!KeBugCheckEx fffff801`dcd05e10 fffff801`dd91ce51 : 00000000`00000000 fffff801`ddb6d180 fffff801`dcd05fc0 fffff780`00000320 : nt! ?? ::FNODOBFM::`string'+0x13c4c fffff801`dcd05e90 fffff801`dd91dcd8 : ffffffff`ffd0ec08 fffff801`dd857502 fffff801`dcd05fc0 fffffa80`039fb010 : nt!KeUpdateRunTime+0x51 fffff801`dcd05ec0 fffff801`dd82deca : ffffffff`ffd0ec08 fffff801`dd857502 fffffa80`0732f098 00000000`00000000 : nt!KeUpdateTime+0x3f9 fffff801`dcd060b0 fffff801`dd8eab2e : 00000009`dcae355d 00000000`6ca2e81e fffff801`dd857580 fffffa80`0732f098 : hal!HalpTimerClockInterrupt+0x86 fffff801`dcd060e0 fffff801`dd8e1643 : fffffa80`07332700 fffff880`05aff06b fffffa80`0af52cd8 fffff801`dcd06309 : nt!KiInterruptDispatchLBControl+0x1ce fffff801`dcd06270 fffff801`dd91e025 : 00000000`00000002 fffff880`05d1aa24 fffff801`dcd06370 fffffa80`0af57990 : nt!KxWaitForSpinLockAndAcquire+0x23 fffff801`dcd062a0 fffff880`05d10d44 : fffffa80`0c166230 00000000`c0000001 fffff801`dcd06440 fffff880`05a9f3a3 : nt!KeAcquireSpinLockRaiseToDpc+0x35 fffff801`dcd062d0 fffff880`05ce3dd6 : fffffa80`0af7a1e0 fffff880`05ce3db0 fffffa80`075fca90 fffffa80`0af6cab0 : NETwew00+0x28cd44 fffff801`dcd06330 fffff880`05ab3304 : fffffa80`00000009 00000000`00000000 00000000`000000e2 fffff880`00000009 : NETwew00+0x25fdd6 fffff801`dcd06370 fffff880`05aab28f : 00000000`00000010 fffffa80`0af28e28 fffffa80`0af6cab0 fffffa80`075fcd70 : NETwew00+0x2f304 fffff801`dcd063c0 fffff880`05ad0d3f : 00000000`c0000001 fffff880`05b08c00 fffffa80`0b55a850 fffffa80`0af52c80 : NETwew00+0x2728f fffff801`dcd06410 fffff880`05aecc69 : 00000000`00000000 00000000`00000000 00000000`00000000 fffff880`00000000 : NETwew00+0x4cd3f fffff801`dcd06460 fffff880`05b08c30 : 00000000`00000000 fffffa80`0af7f168 fffffa80`0af694a0 fffffa80`07a0d000 : NETwew00+0x68c69 fffff801`dcd06490 fffff880`05ab3304 : 00000000`00000000 fffff880`05b08040 fffffa80`0b55a850 00000000`00000001 : NETwew00+0x84c30 fffff801`dcd064d0 fffff880`05aab28f : 00000000`00000040 fffffa80`0af69408 fffffa80`0af694a0 fffffa80`075db2b0 : NETwew00+0x2f304 fffff801`dcd06520 fffff880`05aecde9 : 00000000`ff000401 fffff801`dcd06638 00000000`00000004 fffffa80`075db2b0 : NETwew00+0x2728f fffff801`dcd06570 fffff880`05afb3f2 : fffffa80`000000c7 fffffa80`07332700 00000000`00000000 00000000`00000000 : NETwew00+0x68de9 fffff801`dcd065f0 fffff880`05d17981 : fffffa80`075e2c00 00000000`00000000 00000000`00000000 fffff880`05d17870 : NETwew00+0x773f2 fffff801`dcd06630 fffff880`05bced9f : fffffa80`0732f320 00000000`00000000 fffffa80`0732f000 00000000`00000000 : NETwew00+0x293981 fffff801`dcd06680 fffff880`05cded45 : fffffa80`075e2c00 fffffa80`0732f000 fffffa80`0af6efb0 00000000`00000000 : NETwew00+0x14ad9f fffff801`dcd066f0 fffff880`05d534de : fffffa80`0732f1a0 fffff880`05ab7bdb fffff880`05d884b0 fffff880`05d746f0 : NETwew00+0x25ad45 fffff801`dcd06720 fffff880`05bcf40d : fffffa80`0732f000 00000000`00000000 fffffa80`0af6efb0 00000000`00000000 : NETwew00+0x2cf4de fffff801`dcd06770 fffff880`05ab3304 : 00000000`00000000 fffff880`05bcf3a0 fffffa80`075fca90 fffff880`05ab2e63 : NETwew00+0x14b40d fffff801`dcd067d0 fffff880`05aab28f : 00000000`00000000 00000000`00000000 fffffa80`0af6efb0 fffffa80`075fcd70 : NETwew00+0x2f304 fffff801`dcd06820 fffff880`05ad10fc : 00000000`00000000 fffff880`05bd93b0 fffffa80`0b55a850 fffffa80`0b550900 : NETwew00+0x2728f fffff801`dcd06870 fffff880`05ab3304 : fffffa80`0af6c0a0 fffff880`05c91690 fffffa80`0b55a850 fffffa80`0af6f260 : NETwew00+0x4d0fc fffff801`dcd068b0 fffff880`05aab28f : 00000000`00000010 fffffa80`0af6ca48 fffffa80`0af7f6e0 fffffa80`075db2b0 : NETwew00+0x2f304 fffff801`dcd06900 fffff880`05b350bf : fffffa80`0b56b4e8 fffffa80`07324cf0 fffffa80`0b56b4e0 00000000`00000001 : NETwew00+0x2728f fffff801`dcd06950 fffff880`05ac9a6e : 00000000`00000000 fffff880`00000000 ffff193d`b0ee837f fffff880`05cf08f1 : NETwew00+0xb10bf fffff801`dcd069a0 fffff880`05acc3b7 : fffffa80`07324cf0 00000000`000000ff 00000000`00000000 fffffa80`0afe0190 : NETwew00+0x45a6e fffff801`dcd069f0 fffff880`05ac76f6 : fffffa80`0afe0190 fffffa80`07324cf0 00000000`000000ff fffff880`05ab7b3d : NETwew00+0x483b7 fffff801`dcd06a20 fffff880`05ac7fd1 : 00000002`00000001 fffffa80`0b532df0 00000000`00000000 fffffa80`07324cff : NETwew00+0x436f6 fffff801`dcd06ab0 fffff880`05ac25e7 : fffffa80`0b55aa01 fffffa80`0b55ab90 fffff801`dcd06bff fffff801`dcd06b70 : NETwew00+0x43fd1 fffff801`dcd06b50 fffff880`01c83e2e : 00000000`00000000 fffffa80`0b55ab90 00000000`00000000 00000000`00000000 : NETwew00+0x3e5e7 fffff801`dcd06bd0 fffff880`01c83f3e : fffffa80`0b55ae78 00000000`ffffffff fffffa80`0b55ab90 00000424`9431ba34 : ndis!ndisMiniportDpc+0xfe fffff801`dcd06c70 fffff801`dd918fd8 : fffff801`ddb6ff00 fffff801`00001000 fffff801`dcd06e80 fffff801`dcd00f44 : ndis!ndisInterruptDpc+0x9e fffff801`dcd06d00 fffff801`dd9185d0 : fffff801`ddb6d180 fffff880`03a9f7d0 fffffa80`04d4cb00 00000000`00000004 : nt!KiExecuteAllDpcs+0x198 fffff801`dcd06e40 fffff801`dd917fc5 : 00000000`00000000 fffff801`ddb6d180 fffff880`1ab7d740 fffff880`03343840 : nt!KiRetireDpcList+0xd0 fffff801`dcd06fb0 fffff801`dd917dc9 : fffff880`1ab7d650 00000000`00000010 ffffcd41`5a2d6bb7 fffff801`ddb08bc0 : nt!KxRetireDpcList+0x5 fffff880`1ab7d680 fffff801`dd9b3415 : fffffbdb`6bce4263 fffff801`dd8ea823 fffff880`1ab7d740 fffff880`1ab7d900 : nt!KiDispatchInterruptContinue fffff880`1ab7d6b0 fffff801`dd8ea823 : fffff880`1ab7d740 fffff880`1ab7d900 fffff880`1ab7d740 fffff880`00000000 : nt!KiDpcInterruptBypass+0x25 fffff880`1ab7d6c0 fffff801`dd836be2 : fffff801`dd8290e0 00000000`00000013 fffff880`05efe4a0 00000000`00000014 : nt!KiInterruptDispatch+0x273 fffff880`1ab7d858 fffff801`dd8290e0 : 00000000`00000013 fffff880`05efe4a0 00000000`00000014 fffff880`05f0a320 : hal!HalpTscQueryCounter+0x2 fffff880`1ab7d860 fffff880`05f00c0f : 00000000`000007b1 00000000`000007b1 fffff880`1ab7d9c9 00000000`00000000 : hal!HalpTimerStallExecutionProcessor+0x131 fffff880`1ab7d8f0 fffff880`05f12cd3 : 00000000`00000001 00000000`00000000 00000000`00042065 00000000`000000ff : i8042prt!I8xGetBytePolled+0xef fffff880`1ab7d930 fffff880`05f151fd : 00000000`00030001 00000000`00030001 00000000`00000064 00000000`00000064 : i8042prt!I8xInitializeKeyboard+0x143 fffff880`1ab7da30 fffff880`05f0f008 : fffffa80`0483ba20 fffffa80`072e5b40 fffffa80`073618b0 fffffa80`072e5b40 : i8042prt! ?? ::NNGAKEGL::`string'+0x1ea fffff880`1ab7da90 fffff801`dd8dd49b : fffffa80`04c0ba50 fffff880`c0000001 fffff880`c0000001 fffffa80`0d565940 : i8042prt!I8xReinitializeHardware+0x108 fffff880`1ab7db10 fffff801`dd92a641 : fffff801`ddafb110 fffffa80`0d7686c0 fffff801`dd8dd43c fffff801`00000000 : nt!IopProcessWorkItem+0x5f fffff880`1ab7db80 fffff801`dd899625 : fffffa80`03f89b80 00000000`00000080 fffff801`dd92a500 fffffa80`0d7686c0 : nt!ExpWorkerThread+0x142 fffff880`1ab7dc10 fffff801`dd8d7e56 : fffff880`00996180 fffffa80`0d7686c0 fffffa80`03699040 fffffa80`03629040 : nt!PspSystemThreadStartup+0x59 fffff880`1ab7dc60 00000000`00000000 : fffff880`1ab7e000 fffff880`1ab78000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
    STACK_COMMAND:  kb
    FOLLOWUP_IP: NETwew00+28cd44 fffff880`05d10d44 83bc2480000000ff cmp     dword ptr [rsp+80h],0FFFFFFFFh
    SYMBOL_STACK_INDEX:  8
    SYMBOL_NAME:  NETwew00+28cd44
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: NETwew00
    IMAGE_NAME:  NETwew00.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  5051de6a
    FAILURE_BUCKET_ID:  0x133_DPC_NETwew00+28cd44
    BUCKET_ID:  0x133_DPC_NETwew00+28cd44
    Followup: MachineOwner ---------
    (From W530 machine) 
    0: kd> !analyze -v ******************************************************************************* *                                                                             * *                        Bugcheck Analysis                                    * *                                                                             * *******************************************************************************
    DPC_WATCHDOG_VIOLATION (133) The DPC watchdog detected a prolonged run time at an IRQL of DISPATCH_LEVEL or above. Arguments: Arg1: 0000000000000000, A single DPC or ISR exceeded its time allotment. The offending  component can usually be identified with a stack trace. Arg2: 0000000000000281, The DPC time count (in ticks). Arg3: 0000000000000280, The DPC time allotment (in ticks). Arg4: 0000000000000000
    Debugging Details: ------------------
    DPC_TIMEOUT_TYPE:  SINGLE_DPC_TIMEOUT_EXCEEDED
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    BUGCHECK_STR:  0x133
    PROCESS_NAME:  netsh.exe
    CURRENT_IRQL:  d
    LAST_CONTROL_TRANSFER:  from fffff801c0dd9853 to fffff801c0c7f740
    STACK_TEXT:  fffff801`bfd78e08 fffff801`c0dd9853 : 00000000`00000133 00000000`00000000 00000000`00000281 00000000`00000280 : nt!KeBugCheckEx fffff801`bfd78e10 fffff801`c0caae51 : 00000000`00000000 fffff801`c0efb180 fffff801`bfd78fc0 fffff780`00000320 : nt! ?? ::FNODOBFM::`string'+0x13c4c fffff801`bfd78e90 fffff801`c0cabcd8 : ffffffff`ffd0ec08 fffff801`c139a502 fffff801`bfd78fc0 fffff880`00000000 : nt!KeUpdateRunTime+0x51 fffff801`bfd78ec0 fffff801`c1370eca : ffffffff`ffd0ec08 fffff801`c139a502 00000000`4dedc032 00000000`00000000 : nt!KeUpdateTime+0x3f9 fffff801`bfd790b0 fffff801`c0c78b2e : 00000130`eb958f54 00000000`56005d8e fffff801`c139a580 fffff880`033326c0 : hal!HalpTimerClockInterrupt+0x86 fffff801`bfd790e0 fffff801`c0c6f643 : fffffa80`159f0d40 fffff880`06acb06b fffffa80`1596f598 fffff801`bfd79309 : nt!KiInterruptDispatchLBControl+0x1ce fffff801`bfd79270 fffff801`c0cac025 : 00000000`00000002 fffff880`06ce6a24 fffff801`bfd79370 fffffa80`1596f310 : nt!KxWaitForSpinLockAndAcquire+0x23 fffff801`bfd792a0 fffff880`06cdcd44 : fffffa80`169fd0d0 00000000`c0000001 fffff801`bfd79440 fffff880`06a6b3a3 : nt!KeAcquireSpinLockRaiseToDpc+0x35 fffff801`bfd792d0 fffff880`06cafdd6 : fffffa80`1598a1e0 fffff880`06cafdb0 fffffa80`159c19b0 fffffa80`159654d0 : NETwew00+0x28cd44 fffff801`bfd79330 fffff880`06a7f304 : fffffa80`00000006 00000000`00000000 00000000`000000e2 fffff880`00000006 : NETwew00+0x25fdd6 fffff801`bfd79370 fffff880`06a7728f : 00000000`00000010 fffffa80`15972508 fffffa80`159654d0 fffffa80`159c1d70 : NETwew00+0x2f304 fffff801`bfd793c0 fffff880`06a9cd3f : 00000000`c0000001 fffff880`06ad4c00 fffffa80`15ba3e70 fffffa80`1596f540 : NETwew00+0x2728f fffff801`bfd79410 fffff880`06ab8c69 : 00000000`00000000 00000000`00000000 00000000`00000000 fffff880`00000000 : NETwew00+0x4cd3f fffff801`bfd79460 fffff880`06ad4c30 : 00000000`00000000 fffffa80`15978cd8 fffffa80`1597cab0 fffffa80`0ba2f000 : NETwew00+0x68c69 fffff801`bfd79490 fffff880`06a7f304 : 00000000`00000000 fffff880`06ad4040 fffffa80`15ba3e70 00000000`00000001 : NETwew00+0x84c30 fffff801`bfd794d0 fffff880`06a7728f : 00000000`00000040 fffffa80`15979408 fffffa80`1597cab0 fffffa80`0bbed010 : NETwew00+0x2f304 fffff801`bfd79520 fffff880`06ab8de9 : 00000000`ff000401 fffff801`bfd79638 00000000`00000004 fffffa80`0bbed010 : NETwew00+0x2728f fffff801`bfd79570 fffff880`06ac73f2 : fffffa80`000000c7 fffffa80`159f0d40 00000000`00000000 00000000`00000000 : NETwew00+0x68de9 fffff801`bfd795f0 fffff880`06ce3981 : fffffa80`0b160bc0 00000000`00000000 00000000`00000000 fffff880`06ce3870 : NETwew00+0x773f2 fffff801`bfd79630 fffff880`06b9ad9f : fffffa80`159e8320 00000000`00000000 fffffa80`159e8000 00000000`00000000 : NETwew00+0x293981 fffff801`bfd79680 fffff880`06caad45 : fffffa80`0b160bc0 fffffa80`159e8000 fffffa80`159704f0 00000000`00000000 : NETwew00+0x14ad9f fffff801`bfd796f0 fffff880`06d1f4de : fffffa80`159e81a0 fffff880`06a83bdb fffff880`06d544b0 fffff880`06d406f0 : NETwew00+0x25ad45 fffff801`bfd79720 fffff880`06b9b40d : fffffa80`159e8000 00000000`00000000 fffffa80`159704f0 00000000`00000000 : NETwew00+0x2cf4de fffff801`bfd79770 fffff880`06a7f304 : 00000000`00000000 fffff880`06b9b3a0 fffffa80`159c19b0 fffff880`06a7ee63 : NETwew00+0x14b40d fffff801`bfd797d0 fffff880`06a7728f : 00000000`00000000 00000000`00000000 fffffa80`159704f0 fffffa80`159c1d70 : NETwew00+0x2f304 fffff801`bfd79820 fffff880`06a9d0fc : 00000000`00000000 fffff880`06ba53b0 fffffa80`15ba3e70 fffffa80`15ba3ba0 : NETwew00+0x2728f fffff801`bfd79870 fffff880`06a7f304 : fffffa80`15969790 fffff880`06c5d690 fffffa80`15ba3e70 fffffa80`1597f260 : NETwew00+0x4d0fc fffff801`bfd798b0 fffff880`06a7728f : 00000000`00000010 fffffa80`1596a138 fffffa80`15953b70 fffffa80`0bbed010 : NETwew00+0x2f304 fffff801`bfd79900 fffff880`06b010bf : fffffa80`0b0eb4e8 fffffa80`0bbed390 fffffa80`0b0eb4e0 00000000`00000001 : NETwew00+0x2728f fffff801`bfd79950 fffff880`06a95a6e : 00000000`00000000 00000000`00000f32 00000000`00400a02 fffff880`01a68d24 : NETwew00+0xb10bf fffff801`bfd799a0 fffff880`06a983b7 : fffffa80`0bbed390 00000000`000000ff 00000000`00000000 fffffa80`15b43400 : NETwew00+0x45a6e fffff801`bfd799f0 fffff880`06a936f6 : fffffa80`15b43400 fffffa80`0bbed390 00000000`000000ff fffff801`c0efdf00 : NETwew00+0x483b7 fffff801`bfd79a20 fffff880`06a93fd1 : fffffa80`00000001 fffffa80`15b5dbd0 fffffa80`0bbed700 fffffa80`0bbed3ff : NETwew00+0x436f6 fffff801`bfd79ab0 fffff880`06a8e5e7 : fffffa80`159fec01 fffffa80`15b85850 fffff801`bfd79bff fffffa80`06c89398 : NETwew00+0x43fd1 fffff801`bfd79b50 fffff880`01a68e2e : 00000000`00000000 fffffa80`15b85850 00000000`00000000 fffffa80`07760a70 : NETwew00+0x3e5e7 fffff801`bfd79bd0 fffff880`01a68f3e : fffffa80`15b85d38 00000000`ffffffff fffffa80`15b85850 0000240a`bb33711e : ndis!ndisMiniportDpc+0xfe fffff801`bfd79c70 fffff801`c0ca6fd8 : fffff801`c0efdf00 00000000`00001000 fffffa80`0b0870b8 fffff801`bfd70f44 : ndis!ndisInterruptDpc+0x9e fffff801`bfd79d00 fffff801`c0ca65d0 : fffff801`c0efb180 00000126`a2c54098 fffffa80`17125b00 00000000`00000025 : nt!KiExecuteAllDpcs+0x198 fffff801`bfd79e40 fffff801`c0ca5fc5 : 00000000`00000000 fffff801`c0efb180 fffff880`1f8532b0 fffffa80`2e5edba0 : nt!KiRetireDpcList+0xd0 fffff801`bfd79fb0 fffff801`c0ca5dc9 : ffffe9a6`00000005 00000000`00000000 fffffa80`1dde1b50 fffff880`03332780 : nt!KxRetireDpcList+0x5 fffff880`1f853200 fffff801`c0d412d8 : fffff880`1f8532b0 00000000`00000000 fffff880`1f8532b0 fffff880`00000000 : nt!KiDispatchInterruptContinue fffff880`1f853230 fffff801`c0cb9262 : fffffa80`1faa3f04 fffffa80`08de09e0 fffffa80`1faa3f20 fffff801`c0efb180 : nt!KiDpcInterrupt+0xc8 fffff880`1f8533c0 fffff801`c1064f13 : fffffa80`1faa3f20 00000000`00000000 00000000`00000000 fffff880`1f8538c0 : nt!IopQueueThreadIrp+0x82 fffff880`1f8533f0 fffff801`c104b6da : 00000000`00000000 fffffa80`08de09e0 fffff880`1f853751 00000000`00000001 : nt!IopCloseFile+0x123 fffff880`1f853480 fffff801`c1047c7d : fffff801`c0c05000 fffff801`c0c05000 00000000`00000000 fffffa80`08bc9c90 : nt!IopParseDevice+0xdda fffff880`1f853670 fffff801`c104d2d8 : 00000000`00000000 fffff880`1f853818 00000000`00000040 fffffa80`06ce55a0 : nt!ObpLookupObjectName+0x7a1 fffff880`1f8537a0 fffff801`c0ffce7c : 00000000`00000000 00000000`00f2df88 00000000`00000001 fffff801`c10196d8 : nt!ObOpenObjectByName+0x258 fffff880`1f853870 fffff801`c0c7e753 : 00000000`00000000 00000000`00000000 fffffa80`1dde1780 fffff880`c0000034 : nt!NtQueryAttributesFile+0x13b fffff880`1f853b00 000007fd`5c722fba : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13 00000000`00f2df48 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x000007fd`5c722fba
    STACK_COMMAND:  kb
    FOLLOWUP_IP: NETwew00+28cd44 fffff880`06cdcd44 83bc2480000000ff cmp     dword ptr [rsp+80h],0FFFFFFFFh
    SYMBOL_STACK_INDEX:  8
    SYMBOL_NAME:  NETwew00+28cd44
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: NETwew00
    IMAGE_NAME:  NETwew00.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  5051de6a
    FAILURE_BUCKET_ID:  0x133_DPC_NETwew00+28cd44
    BUCKET_ID:  0x133_DPC_NETwew00+28cd44
    Followup: MachineOwner ---------
    0: kd> lmvm netwew00 start             end                 module name fffff880`06a50000 fffff880`06ebc000   NETwew00   (no symbols)               Loaded symbol image file: NETwew00.sys     Image path: \SystemRoot\system32\DRIVERS\NETwew00.sys     Image name: NETwew00.sys     Timestamp:        Thu Sep 13 06:23:54 2012 (5051DE6A)     CheckSum:         00419EED     ImageSize:        0046C000     Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

    NETwew00.sys version on my system: 15.5.4.45
    Latest driver version from Lenovo support site: 15.5.3.43

Maybe you are looking for

  • F110 Automatic payment program for customer.

    i want to generate BOE for customer with interest document. i had post invoice and interest document and based on this two document i want to generate one sp. g/l document i.e.BOE. but instead of one document, system generate two document i.e separat

  • How to change the Quantity in the Credit Memo using BAPI

    Hi All, I have a requirement in which i need to change the Quantity Value field available in the Credit Memo using BAPI. Can anyone help me out to get any available BAPI to perform this action or any Solution to change the Quantity in the Credit Memo

  • Purchase order delivery date is same as creation date

    Hi, For one of the plant.when PO is created manually  delivery date is taking  same as creation date.why it so. Can any one provide the reason. There are no Personal settings in Purchase order for the material the data maintained as follows : MRP2 :

  • How to Shw Open File Dialog Box

    Hi all, Can anyone help me plz. I am designing an interface using forms 9i where data entry operator has to insert data for products in the database. Also we want to store the image of the product. so I want to show an open File Dialog box from where

  • 23" Display did not come on after disconnecting

    Recently powered down Mac Pro (2007) and relocated to another room along with 23" Cinema display. Powered on and display did not come back on. Checked connection to computer. Only other connection to display is USB from Apple keyboard. Any suggestion