Centro 64 bit bluetooth sync problem

Hi, I searched forum but did not find answer to my specific problem. I just got new computer with Win 7 64 bit so USB cable can not be used to sync my Centro. Added a BT dongle and both the BT software and Centro can "see" each other but Centro either freezes or gives error when I try to sync. Problem seems to be which comm port I am setting up. I have tried to set up a virtual comm port but the BT software seems to only accept comm 40 which is not an option with HotSync manager. Also, I do not see Bluetooth as an option in the hotsync setup.
Any thoughts, links, etc. would be greatly appreciated!
TIA,
Stuart

03-Mar-2008 03:27 AM
patriciabuon wrote:
I am using PC Suite v6.85.14.1 with Vista 32 bit Premium Home and a Nokia 5300 phone. Periodically I am unable to syn - either the sync key is grayed out or I get a warning message "phone has not responded". If I then go to control panel, uninstall progs, PC Suite and hit repair, it will work until I restart the computer when I have to go through the whole repair business again. I can turn the phone on and off and it will continue to work, the problem only seems to occur if I turn the computer on and off.
I have same problem!!!! Only log off and then log in to windows helps.... But this is very annoying solution...

Similar Messages

Windows 7 64-bit Palm TX bluetooth sync problem

hi
was able to bluetooth sync a few times but now i get the message: "unable to initiate hotsync operation because the port is in use by another application"
any ideas? have trie dre-installing, resetting to no avail
thanks,
richard
Post relates to: Tungsten T5

Hello rlarue, welcome to the HPalm Support Community.
If I could direct your attention to the topmost posts in this section? They have a grey background and are called "sticky posts" due to the fact they do not move downwards as new posts arrive, but "stick" to the top.
That said, you'll find two interesting posts! "How to sync a TX via Wifi" and "64 bit drivers are HERE".
(It always pays to look around a bit before posting a question)
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Bluetooth Sync problems, Treo 755P and Vista

I recently purchased a new computer with Windows Vista. After reading the posts I realized that syncing with USB would not work, so I added bluetooth to my computer (Targus USB bluetooth adapter). When I first set it up, my 755p and my PC synced just fine, then it just stopped working. I have checked the settings and drivers and I can't figure out the problem, and I cannot get it to work again. I have tried a soft reset of my 755p. any suggestions?
Post relates to: Treo 755p (Verizon)

Hello and thank you for using the Palm Help Forums!
Are you using Vista 64 bit or Vista 32 bit?
Post relates to: Treo 800w (Sprint)

Palm Centro - Vista - Hot Sync Problem

Hello: I have a Palm Centro (Verizon) and am having major issues hot synching to my new Windows Vista (32 bit) home PC. I continually get the following error message:
"Error: SgConflictNotifier.dll failed a confirmation query and cancelled the sync operation."
"HotSync Error: An application canceled synchronization or failed to respond to a HotSync notification. Please ensure that you are not currently editing data using applications such as Palm OS Desktop or Install Tool (8009)."
I am running Hot Sync Manager 7.0.2 and Palm desktop by ACCESS 6.2.2.
When I tried the Hot Sync operation on my old XP computer, no issues whatsoever. Can anyone help?
Thanks
Seca2man
Post relates to: Centro (Verizon)

I am having the same issue as are several people on this board. I have attempted to reinstall the application and reset my Treo but still nothing. I would be interested if there is a fix I am missing.

1.1.3 causing phone freeze, dropped calls, bluetooth sync problems

Hello,
I upgraded to 1.1.3 a couple days ago and have had the following problems since.
1) The phone locked up / froze. I was switching applications and the screen went to half brightness and the phone would not respond. Could not power off, could not get home button to react, nothing. Was sitting down at PC to search for how to reset when the phone just "came back". This is a bit annoying and has happened a couple times.
2) I have the bluetooth integration in my car. It's worked flawlessly since I got the car and set it up. Not one hiccup. Get in the car and voila. As of 1.1.3 the car had a tough time finding the phone. The phone said it was "paired". Took the car a while to see the phone and be able to use it.
3) The phone has dropped 4 calls in the past day. All dropped suddenly with no warning in a place where I always am able to have clear, long calls.
Is anyone else having trouble with this? The new features are great but the phone is starting to really be annoying and "PC" like in its flakiness.

Same issue. Found a solution that worked for me:
http://www.iphoneatlas.com/2008/01/17/fix-for-iphone-113-bluetooth-problems/
They gave 3 possible solutions. The only one that worked for me was the following:
Connect your iPhone to your Mac or PC then press the “Restore” button in iTunes. When prompted, choose the option “Set up as new iPhone.” Once the phone has been restored, re-attempt pairing with the problematic Bluetooth device. Unfortunately, this solution will result in the erasure of some custom settings on the phone.
Good luck

Bluetooth Sync Problem.

I don't understand why I never get bluetooth connection to work properly with the BB desktop manager and sync with Outlook.
I got it to work for half a day at best and to sync once or twice.
I have Windows 7 Professional and a BB 9700 BOLD. I have BB Desktop Software 6.0.1.18.
It connects just fine with W7 and sometimes with the BB desktop manager. After one or two successful syncs, it tells me that the 9700 is powering off, restarting or something of the sort (which is not true...).
Can anyone guide me towards resolution of this problem?

I feel your pain. I dont get why this does not work properly. It did not work with my pearl and does not work with my Torch.
I tried all sorts of exotic solutions and they all lead down the same frustating path. Once in a while i try it again it works for a day at best and then fails. My phone is always paired with my PC but something BB desktop manager does not "known"/"notice" or sometimes it gives me the same message as you, ie device power off when it clearly is not...
Its particularly frustrating because its not that important but it would be nice to have that option available from time to time.
Just trying hard not to waste a few more hours to try to fix this problem.
Good luck to you.
M

'Source play' and 'audio-video sync' problems with PE8 on fast WIN7 64 bit computer

I am transferring Hi8 videos, about 2 hours long, to my WIN7 64 bit computer with PE8. [Dell Mobile Precision M4400 Computer Workstation (Intel Core 2 Duo T9900 500GB/4GB); NVIDIA Quadro FX 770M, 512MB] I seem to have several problems:
First, after importing the file (.avi), I get a message about ‘dropped frames.’
Secondly, when I try to play the video in the source monitor, the audio plays but the video doesn’t; it only shows the first frame [this is after waiting until the video is ?recognized? ] I can use the shift-arrow key and see that the video is there.
Thirdly, I can play the .avi file in other players, e.g., avidemux or PE pro CS5 on another computer. There, I see that the audio and video are not in sync; the audio can be up to 300 ms ahead of the video (as determined using avidemux).
Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

"I think you're telling me you're using a backwards compatible Digital8 camcorder to capture your video as DV-AVIs. Is that right?" YES
"Are you using Premiere Elements to do this capturing?" YES, AS ABOVE PE8
"Go to the File menu and select Properties. It should show a standard DV codec being used for your video and audio."
WMP v12 is dumb. Under properties, media, it says 'video.' However, avidemux gave me the information state above: video -- Codec 4CC: dvsd, frame rate: 29.971 fps; audio -- codec: PCM, channels: Stereo, frequency: 48 kHz.
So, back to the Questions:
1. Why doesn’t the source monitor play the video? Is this a problem with PE8 (latest update as of 3 March 2011) on aWIN7 64 bit computer (intel duo core. 3 GHz).
2. Is the audio-video sync problem the result of the ‘dropped frames?’ How can PE8 correct this? Avoid this? Or, is it coincidence?

IPhone 3GS SYnc problems with Windows 7 64 Bit

I am having sync problems with windows 7 64 Bit.
The iPhone syncs a few tracks then hangs, a few minutes later itunes tells me the iphone has timed out.
Anyone have any ideas about this. I have tried different USB ports, cleaned the apple USB cable contacts with Servisol, restored the iPhone and reinstalled itunes.
iPhone and iTunes are latest versions.
Thanks
Joe

"Try this connect the iPhone, let the mtp driver installation fail, then go into the device manager and uninstall the unknown mtp device. If you then scan for new hardware from the device manager it should recognize the iPhone & update the driver."
Ok here's what I did:
1) Connect the iPhone (iTunes had been installed)
2) No MTP driver installation is happening as Windows detects iPhone successfully
3) Open Device Manager
4) There seems to be 2 drivers for iPhone that are active now, although I still can't see which one is the MPT driver you're referring to.
One of them sits under Portable Devices: "Apple iPhone". If I view the details of this driver, it lists the following files:
- C:\Windows\system32\DRIVERS\UMDF\WpdMtpDr.dll
- C:\Windows\system32\DRIVERS\winusb.sys
- C:\Windows\system32\DRIVERS\WUDFRd.sys
- C:\Windows\system32\WpdMtp.dll
- C:\Windows\system32\WpdMtpUS.dll
The other one sits under Universal Serial Bus controllers: "Apple Mobile Device USB Driver". And as indicated by Joe above, it lists the following files when I view the Details:
- C:\Windows\system32\Drivers\usbaapl64.sys
- C:\Windows\system32\usbaaplrc.dll

Windows 7, 64 Bit, Bluetooth Hotsync, Desktop 6.2.2 by Access

Windows 7, 64 Bit, Bluetooth Hotsync, Desktop 6.2.2 by Access
I have had problems of hotsyncing my Palm T3 to my windows 7, 64 bit, laptop ever since I bought the laptop.
I've read many posts and followed various instructions to no avail.
But, I've discovered a way that works every time.
As I stated above I have a Palm T3 with built in bluetooth. My laptop is an HP DV7, operating with Windows 7 Professional, 64 bit.
I am using Palm Desktop Version 6.2.2 by Access on my laptop, of which cannot be hotsynced using a USB connection.
I installed an I/O Gear, brandname, bluetooth adapter on my laptop, I bought from Walmart. A very nice micro size adapter.
I established a BT to Laptop PC connection on my T3, and use it instead of the standard Cradle/Cable connection option that was already established on the T3 from the factory.
Make sure your bluetooth is turned on, on both the computer and your Palm device.
Make sure both your computer and Palm device are discoverable and connectable.
Make sure the Hotsync icon is displayed in the taskbar at the lower right corner of your desktop on you computer.
Now you should be setup to sync both devices by bluetooth connection, right? Wrong.
Here's the trick!
Connect your Palm device with your computer using your Palm charging cable connected between your Palm device and into a USB port on your computer. This will pair your device with your computer and bluetooth hotsync will begin immediately after you tap on the hotsync button on your Palm device.
It works for me.
Hope it works for you.
Best wishes
GW2B
Post relates to: Tungsten T3

In PD 6.2.2 there is a PIM conduit switcher. Have you tried this?
Another option I can think to try is to export your data in a format compatible with Outlook, .csv or .tab and then import into Outlook.
Chapura makes a program called pocket copy. It is a one time transfer of your data from PD to Outlook.
They have a program called Pocket Mirror but is only compatible with 32 bit versions.
Here is a link to their site.
http://www.chapura.com/products.php

Centro won't sync with Vista

I can sync my Centro to Palm desktop using my office PC (running XP) with no problems. But when I try to do so at home, on my laptop running Vista 32 bit, the sync stalls out while allegedly syncing the calendar. I have uninstalled and reinstalled the Palm software and the same thing happens every time. What am I missing?
Post relates to: Centro (Verizon)

There may be database corruption causing the issue. Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will scan for database corruption and then report the corruption. You can then find the records causing the problem and fix them yourself or you can purchase the program and have it automatically fix the records.
http://www.pimlicosoftware.com/dbfixit.htm
When you install the program on the Centro, set the conduit in hotsync manager for calendar to do nothing. After you fix the calendar on the Centro, set the conduit for calendar to handheld overwrites desktop.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/SRVS/NUA/launchTab.asp?t=home&fn=centro&mn=centro&cn=verizon
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.
Post relates to: Palm i705
Message Edited by cygnusX1 on 01-28-2009 08:42 AM

Centro will not sync with Palm desktop - Calendar and/or Contacts

I have used a Palm device for many years. Acquired a new Centro. Upon installation of Palm Desktop (on Windows XP) that came with Centro, all contacts, calendar, to do, memos, etc transferred to the Centro during installation.
Subsequent changes to contacts and/or calendar on Centro are not syncing with Palm desktop when Hot Sync is performed. Hot Sync starts and appears to complete normally. To Do list and memos appear to sync just fine. Have tried changing conduits to have Centro overwrite desktop. Have uninstalled/reinstalled Desktop many times.
Hot Sync log:
HotSync operation started for Daniel M. Key on 07/02/08 13:35:13
OK Quick Install
OK VersaMail
OK Memos
OK Media
OK Tasks
-- Backing up MultiMail BData to C:\Palm\MD\Backup\MultiMail_BData.PDB
-- Backing up PmTraceDatabase to C:\Palm\MD\Backup\PmTraceDatabase.PDB
-- Backing up HxSyncRegistry to C:\Palm\MD\Backup\HxSyncRegistry.PDB
-- Backing up Saved Preferences to C:\Palm\MD\Backup\Saved_Preferences.PRC
OK Backup
HotSync operation completed on 07/02/08 13:35:19
Please help. Thx.
Post relates to: Centro (Sprint)

I have a Centro/Verizon Wireless using Versamail with accounts established for personal POP and Exchange e-mail synchronization. The latter account is for work. Previously I owned a Treo 650p using Versamail.
When I first installed Palm OS Desktop and synched to my Centro device, it was on a Windows XP home computer, and no Versamail accounts were defined. First I downloaded and installed the Versamail version which allowed Exchange synchronization. I exported the Treo650p contacts list to a disk file, and imported it onto the Windows XP home computer into the Palm OS Desktop installed with the Centro-supplied CD. This synched the imported contacts list to the Centro fine. After I defined all the POP and Exchange accounts, synchronization with the office Exchange contacts list worked fine, and still does. Synchronization with the windows XP home computer for contacts seems to still be ok, too regardless of the MS Exchange Versamail account commingling with my personal POP accounts. Maybe the install sequence is overriding the previous posts' notation that MS Exchange mail definition will override synch with Palm OS Desktop?
The problem now is I have a different/second home computer that's Vista os. I installed the Palm OS Desktop and synch with the Treo. The contacts list is not synching to this second home computer, maybe because I didn't follow the exact same sequence as for the Windows XP pc? I can still synch my Centro with my Windows XP pc and that includes contacts.
Is there a way on this second pc to override the MS Exchange contacts override for synchronization without having to go through the exact same install sequence as occurred on the Windows XP machine?
Post relates to: Centro (Verizon)

Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine, tried solutions from other threads with no luck, just thought i'd see if anyone else had any ideas, thanks.

Hi all, i can't sync over wifi between my iPhone 4 and Windows 7 64 bit, wifi sync works with the same phone and my Windows 8 machine so the problem seems confined to Windows 7. I've tried solutions from other threads -
Making sure everything is allowed through firewall
Rebooting phone/laptop/router
Disabling ipv6
Disabling all networks except the one curently on
Re-installing iTunes
Restoring iPhone
No luck with any of those unfortunately so i just thought i'd see if anyone else is still without wifi sync after trying those as well and if you ever found a fix, thanks.

I just wanted to leave a note that it's working now. I'm not sure if it was the latest iTunes update that got it working or that i decided to start a new library instead of using the one i had backed up on Windows 8 (it didn't occur to me to check using the old library when i re-installed iTunes). But if anyone is having this problem, it might be worth trying again with a new installation of iTunes to see if the latest update works for you, and if not, try using a fresh library instead of a backup (by fresh library i mean discard your old library completely and start a new library, not just restore as new iPhone, a whole new library).

2014 Sync problems on iPod classic / Please help!! 2014

Hello community!
I really need some help with this problem I am having... I have done some research for the past few days on my own but nothing I have found has helped.
First some specs on my device...
iPod Classic: 80 GB (I believe this is iPod with video, assumed on the fact that it supports movie syncs)
iPod software version: 1.1.2 (up to date according to iTunes)
Formatted for Windows
Syncing to Dell Inspiron with Windows 7
iTunes updated to current version (11.4)
I had much mof my music library uploaded onto my iPod for quite sometime. (close to 14,000 songs synced at 192 kbps) I often like to put my iPod on shuffle and just listen to whatever comes on, but here and there I will skip songs until something I am in the mood for comes on... I began to notice that my iPod was freezing (ON THE DISPLAY ONLY!!! Playback through speakers continued) when I would skip through songs... Once the screen dimmed however, I could once again skip to the next song. I figured this was a problem concerning corrupted files or something similar. These are the steps I took..
1.) Updated iTunes to version 11.4 and checked for further updates
2.) ATTEMPTED to check disk within Windows (was unsuccessful and heard the iPod making a lot of 'clicking' noises from within the casing)
3.) Performed an iPod restore within iTunes
4.) Performed a check disk within Windows and recovered any bad sectors (SUCCESSFUL)
5.) Selected 'Music' sync and the option for 'Entire music library'
6.) UNCHECKED 'Include music videos'
7.) Reconfigured settings as they were before and made slight changes..
     a.) Checked 'Open iTunes when this iPod is connected'
     b.) Checked 'Sync only checked songs and videos'
     c.) Checked 'Convert higher bit rate songs to '192 kbps' AAC'
     d.) Unchecked 'Manually manage music and videos'
     e.) Unchecked 'Enable disk use'
8.) Began a sync on my iPod... With well over 10,000 songs I knew this was going to be a lengthy process.. I left computer unattended..
When I returned to my computer, iTunes was unresponsive... The only way I could get iTunes to show was to minimize a Window on top of iTunes. iTunes states 'Syncing iPod... Do not disconnect' but does not show a rolling progress bar.. I cannot cancel sync, I cannot eject iPod, I cannot close iTunes...
I attempt to eject iPod device through windows, UNSUCCESSFUL (Cannot unmount generic volume while the device is in use)
I 'Ctrl+Alt+Dlt' to Task Manager and End Program 'iTunes' UNSUCCESSFUL..
I End Process 'iTunes.exe *32' and eject iPod through Windows SUCCESSFUL
When the iPod displayed 'OK to disconnect with load bar, I disconnected the device.
As soon as this bar was full iPod IMMEDIATELY rebooted completely and powered back up with only 20 songs synced. (Frustration ensues)
Confused and thinking maybe my screen saver caused an interruption during the sync, I changed screen saver and power saving options to eliminate any possible interruption, REPEATED STEPS 3-8 ABOVE, and started sync again.. Left computer unattended
Again, coming back to computer much later, iTunes was in the same unresponsive state. Closed iTunes and began looking for answers on the internet. Any and all answers I found stated I should restore iPod, update iTunes, run diagnostics tests, etc., etc...
All of which I had done EXCEPT for running a diagnostics test..
Running a diagnostics test: I ran only the tests concerned with 'Device Connectivity' and 'Device sync' tests.. Here are the very interesting results I yielded from these tests...
Device Connectivity Test:
Support services:
     'iPod support service is running.' Status: GREEN
     'iTunes Helper is running.' Status: GREEN
     'Apple Mobile Device is running.' Status: GREEN
Ports:
     'USB ports verified.' Status: GREEN
     'No FireWire (IEEE 1394) ports found.' Status: GREEN
     'iPod found.' Status GREEN
ALL TESTS PASSED
Device Sync Tests
Results:
     No iPod touch, iPhone, or iPad found. Status: RED
ONE OR MORE TESTS FAILED
I am at a loss, I realize that Apple has discontinued the iPod Classic but does that mean iTunes will no longer support these devices!?
And if ANYONE has ANY suggestions for possible steps I can take to regain syncing privileges to my iPod once again, please let me know!
Also, I have diagnostics test results saved on my desktop and available to post if required!
Thank you for any and all help!
-Chris

!UPDATE!
I made several adjustments to my sync options and made some progress and am now trying to sync in 'stages' as I like to think of them.
Here is what I did:
1.) Under 'Music' tab in 'My iPod' options I opted to sync 'Selected playlists, artists, albums, and genres'
2.) Selected a small portion of tunes I know I want on my iPod (ended up being close to 3,500 songs.
3.) Under 'Summary' tab I unchecked the 'Sync only checked songs and videos' box
4.) Unchecked 'Convert higher bit rate songs to ___ AAC'
5.) Checked 'Enable disk use'
6.) Ran a SUCCESSFUL sync!
I am now running a sync keeping the same adjustments in place and have added 6,556 songs. (SYNC IN PROGRESS)
I am wondering if trying to convert that many songs to a lower bit rate is causing sync problems and it appears as if I am at least making progress on this. HOWEVER, I really prefer to decrease the bit rate on my songs so I may fit more on my iPod... Usually most of the files I have in iTunes are at 320 kbps with a select few at 192 kbps. I would like to make everything the way it was before my first iPod restore.. 192 kbps, but this also seems to be the cause of the sync problems I am having? Anyone else have a comment on this?
Thanks again
-Chris

Centro will not Sync with Palm Desktop

I have removed all Palm references from laptop as suggested in: Community Help Forums : Hardware & Software : Software : Re: Syncs fine -- missing all data in Desktop App with no luck.
( http://forums.palm.com/palm/board/message?board.id=software&message.id=35331&query.id=1042#M35331 )
I have a Windows Vista, downloaded Hotsync Manager 7.0.2 and all data (contacts/calendar) from Palm Centro will not appear in Palm Desktop. I have made sure that:
1. user name in Hotsync is the same as is in Palm Desktop
2. tried different user name (suggested "Test" ) with no luck
3. changed name of device through "prefs" icon (at least, in Bluetooth, Device Name is "Palm Centro") I am unable to find another option to change the name of the device for syncing purposes if it is not through Bluetooth
Any other suggestions? I have made entries into te Palm Desktop calendar, do a Hotsync and the entries from the Palm Desktop entries are not appearing into the Palm Centro, and the Centro's contacts and calendar entries are not showing up in the Palm Desktop.
Any suggestions will be greatly appreaciated!
Post relates to: Centro (Verizon)
Post relates to: Centro (Verizon)

Do you have the Centro set to sync with Microsoft Outlook by mistake? Look in Outlook and see if your info is there.
If it is, you can run a simple program in your Start/All programs/Palm/PIM Conduit Sync/Sync with Palm Desktop to switch it back.
Wyrenut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Mac Mini Bluetooth hardware problems ?

I own a Mac Mini Intel Core 2 Duo 1Gb bought last October, an Apple wireless keyboard and an Apple wireless mouse, both I formerly use without any problems with my old Powerbook G4. By now, I used them with my Mac Mini it worked perfectly fine. But since two or three weeks, I’ve got big Bluetooth connection problem. Randomly, after one or two hours of use, both keyboard and mouse loose connection and the Bluetooth symbol change itself into a strange one. I had a look on your site to learn the meaning of it and the symbol is see which is a Bluetooth symbol with a horizontal zebra means that no Bluetooth hardware can be found! Does my Mac Mini built-in Bluetooth card have problems?
Since I haven’t got any wired USB keyboard or mouse I have to reboot my Mac Mini quite roughly. Sometimes one reboot is enough to make the Bluetooth of Mac Mini to work again, sometimes not and I have to wait a little bit more (more than ten minutes). I can see it works again as the Bluetooth symbol is the right one again (the one with the dots).
It is very annoying. And I am a bit sad to have such problems with Apple stuff. Is there something I could do to avoid such a waste of time? Or shall I call Apple Care for fear it should be a hardware problem.
Of course, I use brand new batteries for both of them.
Message was edited by: Christophe Canus

***
My mini is doing it as well. Just started doing 2-3 weeks ago. Logitech Denovo or Apple Bluetooth. Doesn't matter which. Loses it in about an hour or so. Al Keyboards and mice were purchased at about the same time as the core 2 duo mini, ~ last October.
Must power cycle the machine to get it back and it must be paired again. Very annoying. Can't remember if it coincides with an Apple update.
This mini has had the superdrive replaced twice, once within 6 weeks of purchase. Ever since Leopard, it's been close to the best media head. now this...
Sigh.
(What makes it not the best? Frontrow doesn't sort titles correctly [1, 10, 2, 3 - wrong!], doesn't force mount aliases in the movies directory, doesn't put out 1080p without hacking. And I'd so love eyeTV integration with Frontrow. It'd be perfect then.)

Centro 64 bit bluetooth sync problem

Similar Messages

Maybe you are looking for