Centro lags when texting and pushing buttoms

I've had my Centro for a few months now and have just dealt with this but it is extremely annoying and has been going on since I go the phone.  When I push a button, there is a lag before it does anything.  Sometimes I think I didn't push the button hard enough and push it again -- sometimes more than 2x.  Then all of a sudden, it will respond to all three pushes and go somewhere I didn't want to go.  I've noticed lags when I'm typing text, too.  All of a sudden it will kind of freeze up and then it types out the whole word or words.
The battery is fully charged, I have a good signal, and I'm not running any third party software.  I do not have an external memory card and don't have much on this phone except for my contacts & calendar (meaning no pictures, etc.) so I'm sure it's not a memory issue.
HELP!!!!
Post relates to: Centro (Verizon)

Hello and thank you for using the Palm Help Forums!
Usually when a device expierences slow downs it does relate memory issues. Not saying it is but we can try a couple things to see if it resolves your issue. First, try a soft reset. Just remove the battery and leave it out for a few seconds before placing it back in. See if that helps with slow downs.
If this does not work, check the avialable memory. To do so Go to the Applications (home) on the device > Open the menus (by tapping in the upperleft hand side of the screen or using the menu button on the keypad) > From the App menu, choose Info. The amount of free space you have left will be displayed at the top of your screen.
Keep me posted on how much memory you have and if the soft reset helps. If it does not we will move on to other steps. Thanks and have a nice day!
Post relates to: Treo 800w (Sprint)

Similar Messages

  • Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag). Also Premiere Pro CS5, playback is almost like watching footage in slow motion.

      Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush, but only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag).
       Also Premiere Pro CS5 playback is almost like watching footage in slow motion, Premiere Pro is installed on the main drive but the footage is on an external drive connected with USB 2.
      I'm wondering if it is just a problem with the Mac USB drivers maybe not supporting USB 2 ? (Because I have also installed Window 7 on this same MacBookPro and tested the same software "Zbrush and Premiere Pro" And they both work perfectly on the Bootcamp Windows 7 install, and so its using the same hardware so it has to be the drivers right ?)
    Any help would be great, Thanks
    Darius

      Mac book pro (late 2013) has a lag when sculpting and rotating models in Zbrush, but only when using my Wacom-capture tablet (if I use a mouse or trackpad its fine no lag).
       Also Premiere Pro CS5 playback is almost like watching footage in slow motion, Premiere Pro is installed on the main drive but the footage is on an external drive connected with USB 2.
      I'm wondering if it is just a problem with the Mac USB drivers maybe not supporting USB 2 ? (Because I have also installed Window 7 on this same MacBookPro and tested the same software "Zbrush and Premiere Pro" And they both work perfectly on the Bootcamp Windows 7 install, and so its using the same hardware so it has to be the drivers right ?)
    Any help would be great, Thanks
    Darius

  • IPhone 6 Plus lags when texting

    My iPhone 6 Plus is extremely laggy when texting. Doesn't matter if it's in Mail, Messages, Safari or any other App.
    What can be wrong? My iPhone 4S with the same iOS works like a charm...

    Unfortunately the problem came back and is now even worse.
    It comes and goes but the biggest problem seems to be in Safari. So far it has taken me about three minutes to write the two first sentences... However the last sentence took just a few seconds an now it's  working properly again...
    What can be wrong?

  • Otomatic set text and push button

    I want to ask one question about ASP.NET htmlparser.
    I want to go one url and i want to find textboxes and buton .
    After that i will set a value in this textbox and i will push the button.But i want to work this otomatically.I used agilepackage and i went to adress otomatically,i wrote  XPATH and  i found what i want to textbox and i set in my code
    this XPATH.
    var node =document.DocumentNode.SelectSingleNode("/html/body/div/div/div/article/form/input");
    But this node is null ...I want to text website's textbox element.
    How can i take text box. I will set textbox  like down code.
    node.SetAttributeValue("lookupTarget","blabla");
    After that i will buton XPATH adress like node and i will RaiseEvent("onclick")
    HtmlElement button = doc.GetElementById("btnbuton");
    button.RaiseEvent("onclick");
    Thanks for help.

    Hello,
    This forum is used to discuss and ask questions about .NET Framework Base Classes (BCL) such as Collections, I/O, Regigistry, Globalization, Reflection. Also discuss all the other Microsoft libraries that are built on or extend the .NET Framework, including
    Managed Extensibility Framework (MEF), Charting Controls, CardSpace, Windows Identity Foundation (WIF), Point of Sale (POS), Transactions.
    For issues regarding Xpath, there is a specific forum, I will move this issue to there for a better help.
    Edit:
    Oh, I am very sorry for my mistake that I move your thread to this wrong forum. You can ask it here:
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=xmlandnetfx
    Really sorry.
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Office 2013 document with Czech spell check lags when save and close on Windows Server 2012R2 RDS session host

    On our Win Srv 2012R2 RDS session host server (terminal server) I have bad problem. Office 2013 documents with Czech spell checking lags (1-2 min) when I close and save document. When I change spell checking on English everything works OK. On Windows 8.1 works
    both spell checking OK.
    I tried to investigate with process explorer, and when winword.exe lags, active thread is wwlib.dll!DllGetClassObject with Stack:
    KERNELBASE.dll!ReadFile+0x3
    MSGR2CZ.DLL!GramGetError+0x3ffeb
    MSGR2CZ.DLL!GramGetError+0x4045f
    MSGR2CZ.DLL!GramGetError+0x47c7f
    MSGR2CZ.DLL!GramGetError+0x10e17
    MSGR2CZ.DLL!GramGetError+0x125c2
    MSGR2CZ.DLL!GramOpenMdt+0x189
    wwlib.dll!wdCommandDispatch+0x251ce8
    wwlib.dll!DllGetLCID+0x31ef72
    wwlib.dll!DllGetClassObject+0x10887a
    wwlib.dll!DllGetClassObject+0x108535
    wwlib.dll!DllGetClassObject+0x107bc6
    wwlib.dll!DllGetClassObject+0x1030c1
    wwlib.dll!DllGetClassObject+0x1077df
    ntdll.dll!RtlInitializeExceptionChain+0x84
    ntdll.dll!RtlInitializeExceptionChain+0x5a
    MSGR2CZ.DLL is Czech language checker.
    Any idea?

    Hi,
    As the log, MSGR2CZ.DLL and wwlib.dll were both of the Microsoft libraries,not the third-party libraries. Thus, we need to analysis what happened with the dump file. But, it is beyond what we can do in the forum. I recommend you open a ticket with Microsoft
    engineer.
    Thanks,
    George Zhao
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click "[email protected]"

  • IPhone lags when texting

    Anyone else have this problem. When I try to send an SMS, it takes my iPhone 3G about 3/4 of a second from the time I hit a letter to the time it actually types it in the message. Not only that, but the letter I touch stays in the bigger format (extends out, whatever) for the whole time. If I try to type a webpage into Safari, it types normally.
    Anyone else?

    Yep also have this problem.
    _My iphone_:
    Battery drains juice faster than a toddler in the desert. AT&T's 3G network riddled with more holes than Krispy Kreme. Want to cut and paste? Bust out the scissors and glue. Plastic back highly susceptible to nicks and scratches. Still no MMS. Did we mention the battery stinks? Well, it's worth mentioning again.

  • In the past month or so my iPhone 5 battery is dying in hours, whereas it used to last all day at least.  Also, I am getting constant "message send failures" when texting and frequent dropped phone calls.

    Just recently my Iphone 5 battery is dying in a just a few hours, it used to last all day or more.  I'm not doing anything different with it, although I have started shutting down apps etc. to conserve battery.  I get constant "message send failures and frequently dropped phone calls. 

    My best bet would be to restore the phone. Back it up to itunes, and then reset it Factory settings. This way, any corrupt software will be removed, and you can start fresh. Make sure you back it up first. By the sounds of it, you are using the phone for business and probably need the data from it. Hope this helps!

  • Texting and Emailing

    When texting and emailing, is it possible to turn the keyboard horizontally so it expands for more comfortable typing?

    one woudl think so, but currently, no. but you can request for apple to add that here!
    http://www.apple.com/feedback/iphone.html

  • Iphone4 when i type when texting a womans voice is heard and it lags

    since i updated to ios 5.0.1 when i text the keyboard lags and a womans voice repeats what im typing on words

    Perhaps one of the Accessiblity options became enabled (under Settings/General/Accessibility). Look for "Speak Selection" and "Speak Auto-text", and be sure they are turned off.  There is also the "VoiceOver" feature that reads out what's on the screen.  The Home button can be configured so that a triple-click enables VoiceOver (also under Settings/General/Accessibility).

  • PUSH BUTTON text and tooltip dynamic in module pool

    I want to change  at runtime the text and tooltip of a push button which belongs to a screen of module pool (not a pf_status).
    Is there anyone who can help me?

    HEllo,
    Check this report done by Rich,
    Ok..here is my example. Most of the code was generated by screen painter via the tabstrip control wizard. Create screen 100, use the tabstrip control wizard to create your tabstrip, name it TABSTRIP. Double click on the tab text elements, rename them TABSTRIP_TEXT1 and TABSTRIP_TEXT2 for the tab text elements, make sure that the output only check box is checked.
    REPORT ZRICH_0003 .
    data: TABSTRIP_TEXT1(30) type c,
          TABSTRIP_TEXT2(30) type c.
    start-of-selection.
    call screen 100.
    *&      Module  STATUS_0100  OUTPUT
          text
    module STATUS_0100 output.
    SET PF-STATUS 'xxxxxxxx'.
    SET TITLEBAR 'xxx'.
    Fill the tabstrip text elements here!
    TABSTRIP_TEXT1 = 'Text 1'.
    TABSTRIP_TEXT2 = 'Text 2'.
    endmodule.                 " STATUS_0100  OUTPUT
    *&      Module  USER_COMMAND_0100  INPUT
          text
    module USER_COMMAND_0100 input.
    endmodule.                 " USER_COMMAND_0100  INPUT
    FUNCTION CODES FOR TABSTRIP 'TABSTRIP'
    CONSTANTS: BEGIN OF C_TABSTRIP,
                 TAB1 LIKE SY-UCOMM VALUE 'TABSTRIP_FC1',
                 TAB2 LIKE SY-UCOMM VALUE 'TABSTRIP_FC2',
               END OF C_TABSTRIP.
    DATA FOR TABSTRIP 'TABSTRIP'
    CONTROLS:  TABSTRIP TYPE TABSTRIP.
    DATA:      BEGIN OF G_TABSTRIP,
                 SUBSCREEN   LIKE SY-DYNNR,
                 PROG        LIKE SY-REPID VALUE 'ZRICH_0003',
                 PRESSED_TAB LIKE SY-UCOMM VALUE C_TABSTRIP-TAB1,
               END OF G_TABSTRIP.
    DATA:      OK_CODE LIKE SY-UCOMM.
    OUTPUT MODULE FOR TABSTRIP 'TABSTRIP': SETS ACTIVE TAB
    MODULE TABSTRIP_ACTIVE_TAB_SET OUTPUT.
      TABSTRIP-ACTIVETAB = G_TABSTRIP-PRESSED_TAB.
      CASE G_TABSTRIP-PRESSED_TAB.
        WHEN C_TABSTRIP-TAB1.
          G_TABSTRIP-SUBSCREEN = '0101'.
        WHEN C_TABSTRIP-TAB2.
          G_TABSTRIP-SUBSCREEN = '0102'.
        WHEN OTHERS.
         DO NOTHING
      ENDCASE.
    ENDMODULE.
    INPUT MODULE FOR TABSTRIP 'TABSTRIP': GETS ACTIVE TAB
    MODULE TABSTRIP_ACTIVE_TAB_GET INPUT.
      OK_CODE = SY-UCOMM.
      CASE OK_CODE.
        WHEN C_TABSTRIP-TAB1.
          G_TABSTRIP-PRESSED_TAB = C_TABSTRIP-TAB1.
        WHEN C_TABSTRIP-TAB2.
          G_TABSTRIP-PRESSED_TAB = C_TABSTRIP-TAB2.
        WHEN OTHERS.
         DO NOTHING
      ENDCASE.
    ENDMODULE.
    Screen Flow is ....
    PROCESS BEFORE OUTPUT.
    PBO FLOW LOGIC FOR TABSTRIP 'TABSTRIP'
      MODULE TABSTRIP_ACTIVE_TAB_SET.
      CALL SUBSCREEN TABSTRIP_SCA
        INCLUDING G_TABSTRIP-PROG G_TABSTRIP-SUBSCREEN.
    MODULE STATUS_0100.
    PROCESS AFTER INPUT.
    PAI FLOW LOGIC FOR TABSTRIP 'TABSTRIP'
      CALL SUBSCREEN TABSTRIP_SCA.
      MODULE TABSTRIP_ACTIVE_TAB_GET.
    MODULE USER_COMMAND_0100.
    Vasanth

  • Corrupt sms text audio text that keeps sounding when receiving texts and phone calls

    Help!! I opened a text SMS that had a audio noise attached to it now my phone plays the audio noise whenever i get a sms or mms text and when I make phone calls  or dial the phone.  I deleted the text and it still is on my phone.  This is a huge problem becasue I can't  leave my phone on with this noise.

    please read this article from the public knowledge base:
    KB21889 Audio sent in MMS is played back after ending or ignoring an incoming call, or after making an outgoing call.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • I deleted a contact out of my iPhone 4S but when I go to send a message the contact appears although that individual is no longer in my address book. I deleted all text and call history pertaining to the deleted contact but still shows up.

    I deleted a contact out of my iPhone 4S but when I go to send a message the contact appears although that individual is no longer in my address book. I deleted all text and call history pertaining to the deleted contact but still shows up. Does anyone have the same issue and how do I fix it?

    dam122577 wrote:
    but wont restoring as new delete all my info on my phone
    Yes. That is why I added...
    it will disappear over time due to non-use.

  • Ive deleted contacts from my contacts list but they still pop up when i go to text and type in the name of a current contact. .  How can i delete them off my phones memory for good?

    Ive deleted contacts from my contacts list but they still pop up when i go to text and type in the name of a current contact. .  How can i delete them off my phones memory for good? iPhone 4S

    At the present time, the only way to clear that is to restore the phone as new.  Perhaps a future iOS update will give us the option to clear that cache.

  • Scoll Lagging FF7.0.1: fine in safe mode, continues to lag when not even when extensions and plug-ins are disabled (reinstalled, problem continues)

    a few days ago, all web pages started to lag when scrolling. Tried safe mode and speed was restored. returned to normal mode and disabled all plug-ins and extension, however, there was no effect upon the scroll lagging. performed a complete Kaspersky virus check with no issues. Other programs on desktop (ex: outlook) are running concurrently at speed without issue. IE is not running with scroll lag.
    Oh, BTW, I don't know if it is related, but I was in China last week. and Only noticed this scroll lagging here in the US when I opened it this morning ... so, perhaps there is a site preference issue?

    If it boots OK in Safe Mode, the you want to check those possible causes outlined in this article.

  • I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

    I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

    I'm going to guess videos buffer for a while also...
    Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
    To close apps:   Double click home button, swipe up to close the apps.
    To solve internet problem, contact your provider.   Basic internet is not enough for video games and movies.   Your router may be old and slow.

Maybe you are looking for