Centro Repeated Attempts to Hot Sync then Died
I was running errands and heard a beep on the Centro. It told me that I could not connect for a Hot Sync (which I had not attempted) I said OK and the phone continued over and over to try to Hot Sync. I took out the battery twice to see if that would fix things. After the first battery out/in, the phone went back to repeated Hot Sync attempts. After the 2nd battery out/in, the phone died. HELP!
Post relates to: Centro (Verizon)
Hello VAViola and welcome to the Palm forums.
Your Centro is stuck in a HotSync loop. To get out of the loop, do the following:
1. Connect your HotSync cable to the Centro and allow it to sync to your Mac or PC to ensure that all of your data is synced to the compuer.
2. Hard reset the Centro. This will break the loop and erase everything on the Centro and return it to it's factory default settings.
3. HotSync the Centro with your computer to reload your data and applications.
Hope that helps,
Alan G
Similar Messages
-
I have been unable to hot-sync my Verizon Centro with my desktop computer for over 2 weeks. It will connect and start up normally, but then it gets hung up while doing the 2nd part of the datebook synchronization. After some time I have to cancel the operation. I have a third party application called Datebook Plus, which I have used for a long time with no problem. We also recently installed a McAfee Security suite on this computer. I even installed the Palm Desktop on my laptop computer and attempted to hot-sync the Centro with that, but it got hung up the same way. Help!
Post relates to: Centro (Verizon)
Post relates to: Centro (Verizon)
This question was solved.
View Solution.Sounds like some database corruption on the Centro.
I'd suggest the oft-recommended fix here by using DBFixit from pimlicosoftware.com
It will search and correct many of the errors on your Palm device, but may require purchase to fix all of them.
The "sledgehammer" approach would be to Hard Reset the device (which will erase it), and rename your /Backup folder on your computer before doing your first Hotsync to the newly-erased phone.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked! -
Palm Centro - Vista - Hot Sync Problem
Hello: I have a Palm Centro (Verizon) and am having major issues hot synching to my new Windows Vista (32 bit) home PC. I continually get the following error message:
"Error: SgConflictNotifier.dll failed a confirmation query and cancelled the sync operation."
"HotSync Error: An application canceled synchronization or failed to respond to a HotSync notification. Please ensure that you are not currently editing data using applications such as Palm OS Desktop or Install Tool (8009)."
I am running Hot Sync Manager 7.0.2 and Palm desktop by ACCESS 6.2.2.
When I tried the Hot Sync operation on my old XP computer, no issues whatsoever. Can anyone help?
Thanks
Seca2man
Post relates to: Centro (Verizon)I am having the same issue as are several people on this board. I have attempted to reinstall the application and reset my Treo but still nothing. I would be interested if there is a fix I am missing.
-
Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…
Many thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Restore Palm Desktop Addresses from last Hot Sync and using those backup files
I have numerous issues. First I have Windows Vista 64 byte which does not allow a USB Hot Sync so I attempted the Wireless Hot Sync and killed my Palm Centro. The information was restores going to the store and they did something. So that is my first issues - I am unable to Hot Sync. However the Hot Sync took place and I have found the 'Back-up' files on my Computer from that Hot Sync Operation.
My new issue is that somehow I lost many addresses on my Palm Desktop Address File and that is a mystery to me.
What I am trying to accomplish now is to restore those missing addresses on my Palm Desktop (Computer Files) using if possible those backed up files from the last Hot Sync as i do not believe I should try the Wireless Hot Sync again since that has failed me twice and my phone dies and it needs to be restored at the Sprint store. I'm not even sure I remember now how exactly that was done....
So, is there a way to restore addresses to my computer Palm Desktop from those back-up files from the Hot Sync? OR does anyone have a solution to actually performing this Wireless Hot Sync without killing my Palm Centro again?
Thank you for any ideas or suggestions to either or both issues.
Restore Lost Addresses from Palm Desktop without a Hot Sync using back-up Hot Sync files on the same computer or
Performing a Wireless Hot Sync on a Windows Vista 64 byte system that actually works on a PALM Centro?
Karen
Post relates to: Centro (Sprint)You can recover the data from your user folder provided you have only sync'ed once with the PC when you discovered the data missing. When you sync to the PC there are files created for each PIM category in your user folder. For Example; datebook.dat or datebook (Depending on the version of Palm Desktop) and datebook.bak. Using 6.2 the file names are .mdb and mdb.bak. For 6.2, the files are located in the username folder in PalmOSdesktop in my documents.
The files are named .dat and .bak. When you sync, the current data is stored in .dat. The next time you sync the data in the .dat file is copied to the .bak file. You can rename the .dat to .old. then rename the .bak to .dat. If the data in the .bak file is intact, it will now be in palm desktop when you reopen Palm desktop. I have included a link to show you how to find the userfolder on the PC.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=26674
Here is another link regarding data loss;
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=39503
The best way to backup your data is to use the export feature in Palm Desktop. Make a new folder on the PC desktop named Palm Desktop Backup data. Next, select the category you want to export. You will get a window that asks where you want to save the file, save in the folder created on the desktop. There is a button that allows you to select currently selected record or all, select all. If you don't select all, then only the record highlighted is exported. You will then need to name the file for export, I suggest the name of the category, eg: datebook (With current date). Do this for all critical data in each category. With the data exported to the folder on the PC desktop, you can save this data to a flash drive, external hard drive or a CD-RW. With this method you will have your data in a seperate place than Palm desktop and the device. If you "Lose" data again, you can import the data back into palm desktop.
Make sure that when you make changes in palm desktop or the device to export the data to the folder created for the backup.
Here is a link for other options for backing up your data;
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28751
Click on the following link to the kb.palm.com webpage for the article regarding Synchronizing under 64-bit Windows editions: Bluetooth HotSync setup.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=49229
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/centro/centro/sprint/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc. -
My palm Zire 72 lost all battery power, and all infor on it went away. I did a hot sync with my
computer a few days ago. When I sync with my palm it usually takes from palm to computer,
now I need everything from the computer to the palm. How do I do that? I don't want to loose my info.
Post relates to: Zire 72Right click on the hotsync icon in your task bar and select custom. Then highlight each conduit select change and set to desktop overwrites handheld.
Post relates to: Centro (Sprint) -
How do I eliminate this glitch? Music spontaneously starts, stops, stutters at random and I'm not even using that app. Repeated attempts to pause the song and close the app have no affect. Just keeps popping on and off randomly no matter what I'm doing at the time. I tried double-clicking the Home button which brings up all of the active apps, touched and held the Music icon until all the icons started wiggling, tapped the Close icon in the upper left corner of the Music app to close the app completely, but the app is still open and still randomly stuttering. I did notice that the play button icon flashes in the upper right corner of the screen when this happens and it appears and disappears in concurrence with the Music app stuttering. When the music starts, the icon appears and when it stops, the icon disappears again. When the music stutters on and off, the icon appears and disappears rapidly and in sync with that random glitch. This just started today for no apparent reason. I turned the iPad off, waited 30 seconds and turned it back on. As soon as it was finished starting up, the same music glitch began again immediately. I'm using iOS 6.1.3.
Well, no one seems to have any answers or ideas for me, I'll update what I've been able to accomplish.
I reloaded all 14 disks in the time frame of watching Lord of the Rings on Fri. nite.
Funny thing is, the first disk pulled the info from the online store! Hooray!
Wait-then all the next 13 could find no information online...what the heck is up with that? So I MANUALLY assign each disk a new track # to co-inside with each disk, spent about 2 hours doing that.
But still, itunes tells me my playlist is too large, there's not enough space on the ipod. so I unchecked 1 1/2 disks (I'd listen to 1/2 of disk 1 previously) and voila! there's my ipod full of my book. Finally. But what a lot of bother just to keep things in order! -
Laptop restarts sometimes during hot sync
Why does my laptop crash on occasion during hot sync? Laptop is a HP with AMD 2 GHz processor, 2 GB RAM and plenty of disc space. At times I do get "failed to backup one file", PMTracedatabase, Protocol Error: Handheld file could not be opened (4004), SYNCERR_FILE_NOT_OPEN. Phone is a Centro and I have done the updates/downloads. Thanks.
Post relates to: Centro (Sprint)What are the Palm files you are referring to? Are these the files from the Palm desktop user folder?
You can do a sync after the re-install with the conduits set at handheld overwrites desktop to sync the data from the Centro to the PC. To make sure you have the data backed up, use the procedure below.
The best way to preserve your data is to export the data in each application (contacts, calendar, etc.) in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
Here are the "clean" uninstall instructions for Vista.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
If this is the first time you are installing Palm desktop and encountering a problem, skip the previous step.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your Palm desktop from the CD and do a hotsync. If you have the data intact on the device, set the conduits to handheld overwrites desktop.
If it asks you for a username, enter the name that is on your device in the upper right corner of the hotsync screen. -
Here is the scenario:
I have the Palm Centro and I have successfully sync with my home computer. I am trying to sync up with my work computer(I have installed the Palm CD). I have gone in to the hot sync mgr and changed the setting to where "device overrides desktop" . But every time I try and sync it gets held up on the datebook until I finally have to end the task and cancel the sync. Subsequent to that I have tried just syncing everything but the datebook and it still gives me the same hang up and tries to sync the datebook even though I have not selected to sync it. I am running Windows XP on both computers. So as of now the hot sync mgr on the work computer still says "Last Hot Sync: <none>" Any advice?
Post relates to: Centro (Verizon)I have been having similar problems with my new Centro. It was sucnhing for a few days then got hung up. I got DBFixIt, but my Centro won't synch to load it. On one computer it got hung on on Calendar and now when I try and synch it can't find the desktop. I went to Palm and tried to load the newest version of the software (mine is version 1.02) from my other computer, but when I synched with the desktop first (recmmended since it does a hard reset) I got an error message that "Datebook synchronization aborted. Could not read next handheld record. Some handheld records were not copied. Computer may be full or may have reached maximum allowed records on desktop. To correct, delete some records and perform HotSynch - Destop 1306 Handheld 1520."
I checked Palm and I should have plenty of space. I don't know how to delete records without going through each one individually.
How do I either load the DBFitIt or upgrade the software when I can't get it to synch on either computer? I have already done one hard reset.
i am using Windows XP on both computers and Palm Desktop Access v 6.2.2
Post relates to: Treo 650 (Verizon) -
Hot Sync gets stuck at 3 of 13
I have Vista and have done all the downloads, 6.2 and 7.02. It still gets stuck at Date Book. I have changed the conduit to handheld overwrites PC. The calendar gets updated but not the date book on the PC. It used to a few months ago. I do not use email on the phone, only for calls and date book. One thing the log said was PC =0 handheld = 64864. Could there be too much data somewhere that stops the hot sync? Thanks.
Post relates to: Centro (Sprint)Does the sync get stuck or is the data not being updated? If the hotsync hangs-up on 3 of 13, it usually indicates database corruption and DBfixit needs to be run to find the corruption (see the link in the previous post). Do you need to go to task manager and kill the application when it gets stuck?
I see where you stated you have 2 different usernames,
Also, the first file under Palm OS in my documents is named Alexis0 is that the file I should save to the desktop as well as change the name to the current name of the phone AlexisH.
Do you have these 2 different usernames in Palm desktop? If you do you, make sure you are sync'ing to the username that is listed in hotsync on the phone. Go to hotsync on the phone and look in the upper right cornmer of the screen. This will display the username you are sync'ing to in Palm desktop. Is AlexisH the username you are sync'ing to in Palm desktop? If not, then the changes you make on the device will not be sync'ed to Alexis0
If you want to clean uninstall and start again, use the export function in Palm desktop to backup your data. Here is a procedure below to backup your data;
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. Click on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
Make sure you select all for the range in the export window.
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive.
Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
Another option is to copy the username folder in the Palm folder on the C drive of your PC. With this backup you can only use this folder in the same version you curently have installed. -
Apple TV Shows Up, Tries To Sync, Then Disappears
Well I've spent a couple hours reading threads and searching because I knew I've seen other people having issues with Apple TV showing up in iTunes, but I haven't read about quite the same problem nor have I found an answer.
This isn't a problem with mine. My dad recently got an Apple TV. Two weeks ago I went over, got it set up, copied their entire music and photo library plus about 60GB of movies. No problems. Last week when I was there, I was trying to copy one more movie but was having problems getting iTunes to see the Apple TV. I finally gave up and streamed the movie to show him and my mother. I forgot about the problem, but my dad called me yesterday saying he couldn't get music he purchased from the Apple TV over to the computer. Figures. Apple TV is still not showing up in iTunes. Apple TV has no problem connecting to the internet though and no problem streaming from iTunes.
Between what I was trying last weekend and what I've had him do, I can't think of anything else. Restarting either the Mac or the Apple TV allows for iTunes to see the Apple TV for a moment or two. It appears to attempt a sync, then disappears from the Devices list.
The Apple TV is connecting to the network via WiFi. He doesn't have a dedicated router though. The Mac is connected to DSL via Ethernet and Sharing is on to computers via WiFi. Again Apple TV has no problems streaming or connecting to the outside world. Laptops and iPods have no problem on this shared network either.
Can anyone think of anything I could try, or maybe point me to a thread I might not have found?
Thanks!Sorry for starting this thread now - hours too late. The thread I knew was here somewhere popped up. I'll keep this all over there and shut this down. Thanks.
-
Hot Sync problems with Windows Vista using a Tungsten E2
Need Help solving a hot sync problem. Have a Tungsten E2, about a year old. Use Windows Vista OS. Can not sync to desktop. It worked fine for awhile then stopped sync'ing. Have reinstalled Palm Software, Have downloaded Palm 6.2. Have deleted all 3rd party apps,,,and their back up files. Particulary,,,,Epocrates apps, Took over my PDA. Installations and updates gets to synchronizing Calender and 'freezes' have left it on overnight figurng lots of data,,,,no progress. I need help. I really enjoy using this equipment. I use my PDA for all my scheduling of work shifts appts etc. I would appreciate some suggestions. Thanks in advance. Mike.
Post relates to: Tungsten E2Hi.. Welcome to the Palm forums. So if I am understanding you when you try to sync it goes to calendar and freezes and never completes the sync. That being the case the first thing you want to do is go to the conduits and turn off calendar then sync and all should be successful, except calendar will not sync. What this indicates is that you have corrupted data in your calendar, most likely on the E2. Do a google search on your computer for a utility 'dbfixit' and download it to your computer. Extract it so you have the dbfixit.prc file and double click on it to put it in the installer. Then, insuring the calendar conduit is off, sync to install it. Once installed run dbfixit. This utility is free or can be purchased for (I believe) 12.95. The free version will search for corruption and problems let you know where they are and you will have to manually fix or delete them. If you register it, when you run the utility it will find the errors and fix them as well. Once all errors are fixed, turn the calendar conduit back on and you should be able to sync.
-
Error: "Conduit Manager quit unexpectedly" during Mac Hot Sync
Hello! After many years of successfully hot-syncing my Palm m500 to my various Macs, i'm suddenly getting an error message every single time my Hot Sync tries to sync the Datebook data:
The application Conduit Manager quit unexpectedly.
Mac OS X and other applications are not affected.
Click Relaunch to launch the application again.
i've already tried reattaching the USB cables and the Palm m500 into the cradle, and rebooting my Mac several times, and removing the "com.palm.xxxx.plist" files and the "Palm Desktop Info" file from my users/library/preferences folder. and i've spent several hours cruising these forums but nothing has worked. I've tried hot synching about 10 times in the last 12 hours but i keep getting this same error.
i also tried slowing down my hot sync by pressing the Shift key on my Mac during the entire hot sync, but i still get this error:
Conduit Manager: Unexpected error #-111
i tried to paste my full log report below but i ran into the 20k character limit for this form. since it looks like it's "Thread 4" that is causing the crash, i've deleted other parts of the log report but can send those to you in another posting if that would help.
thanks in advance for any help you can offer! i love my Palm m500 as I much prefer it to Apple's iCal system and would like to fix this problem so I don't need to abandon my Palm!
Report:
Process: Conduit Manager [217]
Path: /Applications/Palm/Conduit Manager/Contents/MacOSClassic/Conduit Manager
Identifier: com.palm.HotSync.ConduitManager
Version: 3.2.1 (3.2.1)
Code Type: PPC (Translated)
Parent Process: launchd [144]
Interval Since Last Report: 657 sec
Crashes Since Last Report: 1
Per-App Interval Since Last Report: 41 sec
Per-App Crashes Since Last Report: 1
Date/Time: 2010-01-03 00:20:36.147 -0800
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: 26B9A75C-009B-45C3-B160-FB5932991E00
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x00000000160fc198
Crashed Thread: 4
Thread 0:
0 translate 0xb81529ef spin_lock_wrapper + 90931
1 translate 0xb8183633 CallPPCFunctionAtAddressInt + 169935
2 translate 0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3 translate 0xb80dfb0b 0xb8000000 + 916235
4 ??? 0x8138b831 0 + 2167978033
Thread 1:
0 ??? 0x800bc286 0 + 2148254342
1 ??? 0x800c3a7c 0 + 2148285052
2 translate 0xb818b6ea CallPPCFunctionAtAddressInt + 202886
3 ??? 0x800ed155 0 + 2148454741
4 ??? 0x800ed012 0 + 2148454418
Thread 2:
0 translate 0xb81529ef spin_lock_wrapper + 90931
1 translate 0xb8183633 CallPPCFunctionAtAddressInt + 169935
2 translate 0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3 translate 0xb80dfb0b 0xb8000000 + 916235
4 ??? 0x8138b831 0 + 2167978033
Thread 3:
0 translate 0xb81529ef spin_lock_wrapper + 90931
1 translate 0xb8183633 CallPPCFunctionAtAddressInt + 169935
2 translate 0xb81861e2 CallPPCFunctionAtAddressInt + 181118
3 translate 0xb80dfb0b 0xb8000000 + 916235
4 ??? 0x8138b831 0 + 2167978033
Thread 4 Crashed:
0 ??? 0x7c00867b 0 + 2080409211
Thread 5:
0 translate 0xb8152c24 spin_lock_wrapper + 91496
1 translate 0xb816c825 CallPPCFunctionAtAddressInt + 76225
2 translate 0xb80bdb8b 0xb8000000 + 777099
3 translate 0xb80b7007 0xb8000000 + 749575
4 translate 0xb80d49c0 0xb8000000 + 870848
5 translate 0xb813d75f spin_lock_wrapper + 4259
6 translate 0xb8011b64 0xb8000000 + 72548
Thread 6:
0 translate 0xb815289e spin_lock_wrapper + 90594
1 translate 0xb816e8a7 CallPPCFunctionAtAddressInt + 84547
2 translate 0xb80dfb0b 0xb8000000 + 916235
3 ??? 0x819d8c92 0 + 2174586002
Thread 4 crashed with X86 Thread State (32-bit):
eax: 0x98c10f16 ebx: 0x00000200 ecx: 0x160fc198 edx: 0xf01804e0
edi: 0xb81d8794 esi: 0xb81d8770 ebp: 0x80817f80 esp: 0xb019eeec
ss: 0x0000001f efl: 0x00010213 eip: 0x7c00867b cs: 0x00000017
ds: 0x0000001f es: 0x0000001f fs: 0x0000001f gs: 0x00000037
cr2: 0x160fc198
Thread 4: (0xb011c83c, 0xb81529ef)
0x00163b90: No symbol
0x94f46bb0: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _YieldToThread + 532
0x94f4bfa4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _SetThreadState + 172
0x94f4becc: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _SetThreadStateEndCritical + 136
0x15dd37c8: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _SemWait__7LThreadFP10LSemaphorelR4QHdrRUc + 144
0x15ddcb90: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _BlockThread__10LSemaphoreFl + 92
0x15ddca38: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _Wait__10LSemaphoreFl + 104
0x15dd1eb4: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _Run__Q27LThread7CleanupFv + 48
0x15dd3df8: /Library/Application Support/Palm HotSync/Transports/Serial/Contents/MacOS/Serial Transport : _DoEntry__7LThreadFPv + 64
0x94f4bdf4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _CooperativeThread + 348
0x913bf1d4: /usr/lib/libSystem.B.dylib : __pthread_body + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x00000000 lr: 0x91335120 ctr: 0x9132e1f0
r00: 0xffffffe1 r01: 0xf0101ae0 r02: 0x00000013 r03: 0xf0101b8c
r04: 0x00000003 r05: 0x00000018 r06: 0x00000020 r07: 0x00006187
r08: 0x00000000 r09: 0x00000000 r10: 0x00000000 r11: 0xa020568c
r12: 0x9132e1f0 r13: 0x00000000 r14: 0x00000000 r15: 0x00000000
r16: 0x00000000 r17: 0x00000000 r18: 0x00000000 r19: 0x00000000
r20: 0x00000000 r21: 0x00000000 r22: 0x00000000 r23: 0x00000018
r24: 0xf0101b8c r25: 0x00000020 r26: 0x00006187 r27: 0x00000000
r28: 0x00000000 r29: 0x00000003 r30: 0x00000003 r31: 0x94f469a4
Thread 5: Crashed (0xb019eeec, 0x7c00867b)
0x7c367b28: No symbol
0x7c364a58: No symbol
0x7c364b44: No symbol
0x7c35a818: No symbol
0x7c34a3bc: No symbol
0x7c347fe8: No symbol
0x7c34813c: No symbol
0x7c32da54: No symbol
0x7c329168: No symbol
0x7c327e70: No symbol
0x7c32763c: No symbol
0x7c32884c: No symbol
0x7c346c48: No symbol
0x7c346ec0: No symbol
0x8536c290: No symbol
0x8536cf30: No symbol
0x8536cb6c: No symbol
0x8536e004: No symbol
0x85366484: No symbol
0x85372680: No symbol
0x853c949c: No symbol
0x94f4bdf4: /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonCore.framework/Versions/A/CarbonCore : _CooperativeThread + 348
0x913bf1d4: /usr/lib/libSystem.B.dylib : __pthread_body + 40
0x00000000: /System/Library/Frameworks/Carbon.framework/Versions/A/Support/LaunchCFMApp : + 0
PPC Thread State
srr0: 0x00000000 srr1: 0x00000000 vrsave: 0x00000000
cr: 0xXXXXXXXX xer: 0x20000000 lr: 0x7c367a80 ctr: 0x9132f590
r00: 0x00000008 r01: 0xf01804e0 r02: 0x15f2f000 r03: 0x00000003
r04: 0x1610beb8 r05: 0x00000002 r06: 0xf018051c r07: 0x00000000
r08: 0x000eb2a4 r09: 0x00000000 r10: 0x00800000 r11: 0xa0882d04
r12: 0x9132f590 r13: 0x00000000 r14: 0x003f252c r15: 0x00000001
r16: 0x001751f0 r17: 0x003f2558 r18: 0x003f2588 r19: 0x003f2518
r20: 0x003f24e8 r21: 0xf0181426 r22: 0x00144c00 r23: 0x00000003
r24: 0x00000008 r25: 0x15f32dcc r26: 0x15f32d54 r27: 0x0000ffff
r28: 0x000095bf r29: 0x15f3705c r30: 0x15f37060 r31: 0x00893ca8
Post relates to: Palm m500
Post relates to: Palm m500I had the same problem syncing my Palm TX with 10.5.8. After being without my Palm for 3 weeks, I bought Snow leopard, and all was fine again. I found out at an Apple store that 10.5.8 was full of propblems, and this was one of them.
Fast forward: I've been using 10.6 ever since it was released, happily syncing away with my Palm ... until Friday night (2 days ago), when it stopped working, and then I discovered that Palm does not and will not support Mac OS 10.6. So I'm urgently trying to migrate everything on Palm to my iPod Touch, exporting to 10.4 on an old iBook, since it will still sync with it, then moving the data to my iMac's 10.6, and then syncing with my iPod Touch.
I'm working on the problem now, and have my Schedule migrated, but now need to get my ToDo, Address Book and Memos done.
The 10.6 Address Book (v5.0.1) doesn't support the Palm's custom fields like Tiger's Address Book (4.0.6). I can't yet find a way to export the Palm's ToDos in a format that iCal can consume, and Notes on the iPod (for my Memos, possibly) is not supported on 10.6 yet for my iPod Touch.
1 step forward, 3 steps back, so far; but absolutely necessary, now that Palm has withdrawn from the Mac market.
Any ideas on these 3 problem areas, from anyone, would be most welcome. -
Palm m125 stylus won't work after hot sync
Yesterday I dropped my m125 and the batteries fell out. I didn't notice right away and the system did a hard reset.
When I put the m125 in the cradle and did a hot sync, it updated everything and then I got a message I needed to reset the palm. When I clicked on the reset button, I went directly to a screen that says Preferences on the LHS and Date and Time on the RHS. My stylus no longer works properly at this point. When I touch the home icon, it does not register. If I try to navigate anywhere using the stylus, it registers that I am touching somewhere else on the screen. There is no way I can get to the home screen so I can go through the welcome and calibrate the stylus.
I uninstalled the palm desktop software, restarted the machine and reinstalled the software. Same exact problem. I installed the DigiFix free software, hot synced to add the program and ... same exact problem.
IF I take the batteries out for a hard reset, then the palm is working exactly correctly.
But I can't get any of my information back unless I hot sync, which renders the palm useless again.
IF I could download the keyboard software, I could hypothetically manually add all the lost info a little bit faster than using the touch screen. But I can't find the software and I will be vulnerable to losing everything again if I can't hot sync the stuff back onto my computer.
One other thing I don't know if it is relevant, even after I uninstalled, restarted and reinstalled the palm desktop software, all of my original data was still available. Shouldn't it be gone if I had removed the entire program? Does it matter?
Post relates to: Palm m125After the hard reset; are you able to align your screen? If I am following you correctly you are saying this is the case, and only after the sync the digitizer will no longer align.
If this is the case you may have corrupted data in you Palm Desktop. First I would rename the backup folder under your original user name and sync again to see if this will resolve the issue. If not then you can create a new user name in your Palm DT, then hard reset the device again, then choose to sync to the new user name you created instead of the original user name. Then you could export your original data to a (original user name) file, and then import the data under the new user name to restore your data.
When you delete the Plam DT application it does not remove the data file. When you
re-install the Palm DT software it will re-associate to the original data. This is why the data came back. -
Help!!!
My old computer died, and I have a new PC with Windows 7 and 64-bit architecture.
I have installed the Palm OS and copied my data files over to the new PC, and I can run the Palm program on the new PC.
Howerer.........the Hot Sync feature will not work, and I am guessing it must be the move from 32-bit to 64-bit, but I have no idea how to resolve this issue.
Can anyone help? [email protected]
Many thanks in advance.
Post relates to: Zire 71Hello mjh4001, thanks for reminding everyone!
We've had a link to this and instructions posted as a sticky post for over a year now. See the "64 bit Windows USB drivers for Palm Desktop" thread at the top of this section of the Forum.
Acceca really stepped up to the plate, eh?
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!
Maybe you are looking for
-
It is posibble to add a jtable in jmenu ??
-
Hi Friends, Can you please give an example of how to use FM 'SWX_GET_MANAGER'... i really appriciate if you give some examples.. John.
-
Customer Record Creation - XD01
hello, I am trying to upload data like Street2, street3 and street 4 which can be viewed in the street address drop down in transacction XD01/02. In call transaction i am not able to upload. Please can anyone tell me the reason why it is doing so? Th
-
BPEL human workflows: How to carry task parameters to another flow
Hi all i want to split the flows to make it maintainable. i have 8 humantasks including flow and when i split this, it will share 3-5 humantasks in each of them. i want to carry the task details from first flow to second one(History,payload and comme
-
How do I download Windows Media Player for Mac?
I keep downloading it from the Microsoft website..and...it doesn't work. My husband bought a new MacBook (Leopard) and he's trying to figure out how to look at something on a website that gives him a link to download this. I helped him download Flip4