CER 8.5 unable to put in Canada Zip code

Hi,
I've a client running CER 8.5 on VMWare. The System Locale is set to "United States".
Client is adding an ALI for Canada but the ZIP code and ZIP code extension are not taking the valid canadian Zip codes which are Alpha Numberic.
For example, one of the Valid Canadian Zip Code is: L6M2W1, when client tries to put it in, he gets the followoing message:
"Please enter a valid numeric value for Zip Code".
As per the CER 8.5 Administration guide, the Zip Code and Zip Code extension fields will take following values:
Zip Code  ----- The postal zip code for the address.  ---- You are limited to 5 characters.
Zip Code Extension --- The postal zip code "plus four" number.  ---- You are limited to 4 digits.
The country Code and State are correctly set to CA/ON but still same error. Trying to update the existing ALIs are also throwing the same error.
I am not sure what version they were running earlier, but he did say he never had this issue in previous CER version.
Has someone else noticed it and is aware of any possible fix for it? Or client needs to change the Locale from "United States" to "Canada" to fix it?
Thanks in advance,
Kapil

Thanks for your time replying.
I figured it out and asked the client to ignore it.
Not sure if he is going to like it, but what's Cisco's say on it?
If I get it somewhere documented clearly that it's meant only for United States locations, it'll make things clear.
Thanks,
Kapil

Similar Messages

  • Why is my location city changed by Firefox to a town I don't live in? I put in my zip code in the weather info and it will not hold it no matter what I do. This is very frustrating and never a problem in the past. IE doesn't have the problem. Help?

    Why is my location city changed by Firefox to a town I don't live in? I put in my zip code in the weather info and it will not hold it no matter what I do. This is very frustrating and never a problem in the past. IE doesn't have the problem. Can anyone help?

    1) Is it a video clip? Something you recognize?  To be clear, it's displaying at a point in your exported movie but doesn't appear at all in the sequence?
    2) What are your sequence settings?  Right-click your sequence and choose "Item Properties" to verify.

  • I am unable to put new songs on my ipod

    I am unable to put new songs on my ipod. When I put new songs into my itunes, i see them just fine. I go to sync my ipod and it says "sync is complete" within seconds, so I know nothing has been synced. New playlists are also not showing up. Many of my default playlists show up multiple times(90s music, recently played, etc). I have the 30 gig ipod with video. There are about 20 gigs on it. Thanks.

    ok the manually manage music box was checked, I don't know how. That seemed to help. As long as I have you here perhaps you can help me with another problem that happens from time to time. My ipod likes to fall asleep when I'm syncing it. It goes to the apple icon on the ipod, stops syncing, and then starts back up again. The problem seems to go away when I restart the computer and/or itunes. I'll occassionally get an error message that says "the ipod "mullen's ipod can be synced. The required file cannot be found." Then I get the message at the top of the screen that says sync complete. In some cases it actually is synced! Any thoughts?

  • Trying to set download apps...says it needs my credit card info...I put it in....but then it won't take it because it says I need to enter my zip code.  I live in Canada and have a postal code, not a zip code.  Help

    I am trying to set up my new Iphone 4 and download apps.  I made an Apple Id which is all good.  But when I try and enter in my credit card info it keeps asking for my Zip code and state.  I live in Canada not US.  I changed the phone to Canadian but it still keeps asking for it and won't let me put in my right information which in turn won't let me download any apps.  Can anyone help?

    Postal & Zip codes are same.  Just enter postal code without space.  It will accept.

  • Hi guys have a problem with my ipod touch 4 gen i deleted my music and am now unable to put music on to my ipod. when i attache the ipod to itunes it says the music is still on my ipod any ideas thanks in advance.

    Hi guys have a problem with my ipod touch 4 gen i deleted my music and am now unable to put music on to my ipod. when i attache the ipod to itunes it says the music is still on my ipod any ideas thanks in advance.

    Do a reset of everything on your ipod. Then reconnect it and it should work.

  • PC/64/Windows 7/XIStandard recently installed/unable to put footer into document because I can't move to the bottom of the image when in footer application mode.  Display is at recommended 1920x1080.  Is there a solution or is it a flaw in the program?

    PC/64/Windows 7/XIStandard recently installed/unable to put footer into document because I can't move to the bottom of the image when in footer application mode.  Display is at recommended 1920x1080.  Is there a solution or is it a flaw in the program?

    Don't have a direct answer. But did you install the updates. They might resolve the problem.

  • Unable to put youtube in full screen under nightly

    Hello, when I open a youtube screen under nightly I am unable to put any video in full screen. The full-screen icon does not work. Youtube works just fine (videos get in full screen mode) under IE or under Tor-browser but not under Nightly. I reinstalled my nightly, removed all the plugins but to no result and videos from other sites work juste fine in full screen.
    Could you helps me? Thank you.

    The Nightly version is intended for alpha- software testers, not for the general public. Since Nightly is updated daily, that could be a transitory problem which might be corrected tomorrow, or that could be something that will take awhile to fix.
    You might want to check the Builds threads over here to see if any other Nightly users have that same issue, and might have some suggestions.
    [http://forums.mozillazine.org/viewforum.php?f=23&sid=4830099dbc92b2104fde108ceef24770 MozillaZine Builds forum]
    ''Viewing the threads over there doesn't need registration, but if you want to post at MozillaZine you'll need to register there. ''

  • My screen is cracked and black how do i get my photos off of the phone if unable to put passcode in

    My screen is cracked and black how do i get my photos off of the phone if unable to put passcode in

    You don't not with a crack screen.

  • We are unable to have iPhoto books shipped into Canada, because the shipping address field will only accept US zip codes. Any solutions?

    We are unable to have iPhoto books shipped into Canada because the shipping address field will only accept US zip codes. Any solutions?

    Have you set the Print Products Store to Canada in the iPhoto Preferences > Advanced Panel? 
    This determines the address format.
    And your billing address and shipping address must be in the same country, as defined for your AppleID and credit card.

  • HT1378 i am unable to put my ipod classic into disk mode. what do i do to reset/restore it?

    i am unable to put my ipod classic into disk mode. what do i do to get the red x tto go away and restore my ipod?

    imlockedoutofmyiphone wrote:
    I have looked at multiple websites; they all have the same instructions for putting your IPhone into recovery mode using ITunes.
    My computer was not downloading ITunes before, but I recently made it work. I turned my phone off, held the home button, plugged in the phone to the computer with ITunes already up. The little USB cord and ITunes logo showed up. The instructions said that a popup would say that ITunes had 'detected and IPhone in recovery mode', and from there I would be able to reset my phone. However, the popup never happens. I have tried this several times, and it's the same: I see the USB cable and ITunes logo on my phone screen, and in the corner of ITunes, a picture comes up of a phone with a little 'X' next to it. I clicked on the phone, on the X, but nothing works. The popup just never shows. I am unable to reset my IPhone because of it. I have not found any other way for me to reset my phone, since I didn't activate Find My Phone or ICloud.
    There is no icloud on an iphone 3, because you need IOS 5.0 or higher, the highest IOS is 4.2.1

  • Unable to put password in mail accounts

    I am unable to put the password in my mail accounts. It was working a couple of days ago but now does not have a password and as such cannot get mail.

    You might actually try just making a new folder, and dragging the emails into it (in Mail's sidebar).
    There is another way around this. In Mail's "File" window, select "import Mailboxes". Navigate to ~/Library/Mail folder, and select the accounts you want to import. Do this for each one (the folder to select will start with IMAP or POP). Then, Mail puts these in an "Import" folder on the sidebar in Mail. Now, disable the accounts.

  • Unable to put  Reason for Rejection for Return Sales Order

    Hi
    I am unable to put  Reason for Rejection for Return Sales Order.
    what may be the reason?
    Reg,
    Antaa21

    hi
    One of the possible reson could be, there is subsequent document created. Please check the VBFA table for document flow and see if there is any other document created for this line item, if yes then you have to reverse the same
    Check whether this field is maintained as DISPLAY only or not
    T-Code SE51(Screen Painter)
    Give Program Name SAPMV45A
    (before doing this confirm from the field from sales order, keep curcer on the pricing date press F1
    and then select technical details)
    Screen Number 4441
    (before doing this confirm from the field from sales order, keep curcer on the pricing date press F1
    and then select technical details)
    Select Attributes radio button.
    Go to Element list Tab. Inturn select Special Attribute tab in Subscreen.
    For Field Name "VBAP-ABGRU" Check what is maintained might be it is maintained as DISPLAY only.

  • I am unable to put photos from an incoming email into IPHOTO even after clicking on Add to I photo.

    I am unable to put photos embedded in incoming email into my IPhoto- even when I click on
    Save As and Add to I Photo. ANy suggestions? THanks.

    As a test launch iPhoto with the Option key held down and create a new, test library.  Try to import the photos from the mobile devices to test to see if the same problem persists. Does it?
    OT

  • I recently uninstalled my itunes and reinstalled. after that i lost all my music and am unable to put hunderds of songs back onto my itunes and ipod. help!

    I uninstalled my iTines and re-installed on my Fujitsu laptop.When I went to synch, I was unable tosynch my iPod to my iTunes. In addtion,I am unable to put my iTunes library of 100s of songs back onto my iTunes or iPod.I have lost all my compilations and my playlists.

    Hey bryce255,
    Thanks for the question, that definitely sounds frustrating. Luckily, we have steps available that may be able to restore your previous library:
    No content shows up in iTunes after updating
    http://support.apple.com/kb/TS1967
    Resolution
    1. Quit iTunes.
    2. Download and install the latest version of iTunes.
    3. Use the Finder (Mac) or Windows Explorer (Windows) to go to the iTunes folder that contains the iTunes library files:
    Mac OS X
    /Users/username/Music/iTunes/
    Microsoft Windows Windows XP and Windows 2000
    \Documents and Settings\username\My Documents\My Music\iTunes\
    Microsoft Windows Windows Vista and Windows 7
    \Users\username\Music\iTunes\
    4. Drag the iTunes Library file from the above location to the Desktop.
    5. Open the Previous iTunes Libraries folder in the iTunes folder.
    6. Locate the file named iTunes Library YYYY-MM-DD where YYYY-MM-DD is the date you upgraded iTunes (Year-Month-Day).
    7. Drag this file to the iTunes folder (the enclosing folder).
    8. Rename this file to iTunes Library.
    9. Open iTunes.
    You should now see your missing content in iTunes.
    If the above does not resolve your issue, you can learn about re-creating your iTunes library:
    iTunes: How to re-create your iTunes library and playlists
    http://support.apple.com/kb/HT1451
    Thanks,
    Matt M.

  • Unable to Put the Translations in SE63 on Transport

    Hello,
              I am working on Tralating the Texts in the Smartform using the Transaction SE63. However, I am unable to put the Changed Translations on a Transport so that I can move it to further boxes in the Landscape (Quality and Production). Can someone let me know the detailed procedure to put the Translations in SE63 on a Transport? Just to let you know, I am working on the ECC 6 System (It may or may not be relevant).
    Thank You,
    Venkata Phani Prasad K

    Hi,
    Execute the program RS_LXE_RECORD_TORDER to assign transport request for the translated object. Please refer to this link[transport request for the translated object|https://help.sap.com/saphelp_nwmobile71/helpdata/en/9b/817586c6c64426b3ccebf77e4187b5/content.htm]
    Regards,
    Abhijit

Maybe you are looking for