CER 9.0 One Line number on two phones at different locations

I'm putting some phones statically into CER and I have a line number that is on two different phones, the phones are at two different building locations. Is there a way to put both phones into CER with the same number but have the correct information be pulled up when dailing 911?

Got it, you can only have unique manual phone extensions defined, so you cannot have the same extension assigned to 2 different ERLs.  If one it to be build manually and another one is tracked then CER uses the following order to figure out which one to use:
Call Routing Order
Emergency Responder directs emergency calls based on the location of the phone from which the call is placed. The location of the phone is determined by the following methods, in order of precedence:
 Synthetic phones—The MAC address of the phone matches that of a synthetic phone and is assigned to a test Emergency Response Location (ERL). See Synthetic Phones and Set Up Test ERLs. 
 IP Phones tracked behind a switch port—The MAC address of the IP phone is tracked behind a switch port assigned to an ERL. See Switch Port Configuration. 
 IP Phones tracked using IP subnet—The IP address of an IP phone belongs to an IP subnet assigned to an ERL. See Set Up IP Subnet-based ERLs. 
 IP Phones tracked by another (remote) Emergency Responder server group in the same Emergency Responder cluster—The remote server group tracks an IP phone behind a switch port or by IP subnet. When an emergency call is received, it is forwarded to the Cisco Unified Communications Manager cluster served by the remote Emergency Responder server group. See Phone Moves between Clusters. 
 Manually configured phones—The line number of the phone is manually assigned to an ERL. See Manually Define Phones. 
 Unlocated Phones—The MAC address of an IP phone is assigned to an ERL. See Identify Unlocated Phones. 
 Default ERL—None of the preceding criteria is used to determine the phone location. The call is routed to the default ERL. See Set Up Default ERL.

Similar Messages

  • I have one itunes account with two phones. when i phone one of the numbers both phones have started to ring, only when connected to wifi at home. How do i resolve this please?

    I have one itunes account with two phones assigned to it, sons and daughters, (5s). When i phone one of the numbers both phones have started to ring, only when connected to wifi at home. The problem does not occur when not connected to wifi. How do i resolve this please? texting is fine it is only when ringing one of the numbers.

    <http://support.apple.com/kb/HT6337>
    "To turn off iPhone Cellular Calls on a device, go to Settings > FaceTime and turn off iPhone Cellular Calls."

  • Can I use one iCloud account for two phones without sharing contacts

    Can I use one iCloud account for two phones without sharing contacts

    If so how do I unmerge the two phones?

  • Two phones with different contacts and one computer?

    how do i go about syncing two phones, with different contacts, to one computer?

    If you are using Microsoft Outlook and syncing different contacts is your concern, you can set up a new Contacts folder for your iPhone (like "Jeff's Contacts") and set iTunes to sync that folder only to your iPhone. Create a second new Contacts folder for the other iPhone's contacts and do the same thing. Works great for my iPhone and my wife's iPhone, both synced to our home computer.

  • How can I use two different wireless home phone terminals, different locations, one at a time same phone number

    I have two locations and want to have a wireless home phone at each location with the same home phone number. Only one terminal will be used at a time.

    That's not what a cell phone is.
    You are talking about some kind of a separate communication system.  Like a walkie talkie or something that works over broadcast.  IP phones may be able to do something like that but you would somehow have to register the system to a single cell phone number, which wont work without a SIM card.

  • One email account for two phones

    Using the Exchange 07 BIS email account is it possible to have the email account push the messages to two different BB phones? I believe BIS only uses one PIN at one time. Does anyone know any different?

    Hello,
    Via BIS, the function is akin to any other POP email client. You can have any number of POP clients accessing the same email account. For a BB, each BB must have a BIS account of it's own, but then each can be configured to access the same email account. The tricky part of such a configuration is determining which one is the master and being careful about deletions and such.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • One apple id on two phones, will they both disappear?

    I have the same apple id on two phones if i delete it from the other one will it disappear from both of them?

    No.  Removing an Apple ID from one iOS device has no effect on any other iOS device, whether it's linked to the same Apple ID or not.
    Where and how are you deleting this Apple ID from the device?  If in iCloud, be careful about choosing the right option in regards to your previously synced iCloud contacts, for example.

  • Two users share one Apple ID, on two phones. can they be separated without losing phone backups? IE creating a new ID for one of the users?

    my in-laws share one apple id for two separate iPhones. They would like to create a new ID for one of the users but maintain his current backup. can this be done?

    If you want to create a new account make sure you sign out of everything via the settings. (ICloud, iTunes, facetime, messages, etc) APPS: since the apps were downloaded with a different apple ID, you will always need to use the password for the apple ID that downloaded that particular APP when it needs to be updated. Unless it is free, you can simply delete it and download it under the new apple ID. As for the music, you can keep it on the IOS device,  but if it's accidentally deleted, you'd have to sign back into the original account and download from the cloud. (But, you risk getting the 90 day lockout. )

  • My wife and I have both Iphone 5 and 5c.  We have currently one icloud account and the bill is under one account number for both phones.  We are not set up right.  We want to be able to share only contacts, calendars, pictures, music.  How do we do this.

    My wife and  I have iphone 5 and 5c.  We want to only share contacts, calendar, music and photos.  We currently have one iclud account and are billed under one customer number.  How can we accomplish this?

    Read http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    If you wish to share an Apple ID with family members then read: http://www.macstories.net/stories/ios-5-icloud-tips-sharing-an-apple-id-with-you r-family/

  • One Controlling Area for Two CoCds with different Fiscal Year variant

    Hi,
    I have a Company code with FYV "A1" with 12 Periods (Apr - Mar) - Fiscal year start at Apr-01 and ends Mar-31 of the next year.
    I have another company code with FYV "B1" with 12 Periods (Jan-Dec). - Fiscal year start at Jan-01 and ends Dec-31.
    Chart of Accounts for both the company code is same.
    Can I assign these two company codes to one Controlling Area?
    When I try to assign the company codes, I got the following warning message.
    Differing fiscal year variants: A1 - B1
    Message no. KT297
    Diagnosis
    Fiscal year variant A1, controlling area 1000, does not agree with fiscal year variant B1, company code 5001.
    The following entries must agree:
    - Same number of posting periods (the number of special periods may vary)
    - Same period limits
    Procedure
    Ensure that the fiscal year variants of the controlling area and the assigned company codes agree. If necessary, maintain the fiscal year variants.
    1. What is the meaning of "Same period limits"?
    2. Does it mean the fiscal year start and end date must be same?
    3. What is the impact of the warning message?
    Thanks
    Palani

    Having same fiscal year variant is one of the requirements for different company codes to be under one controlling area.
    The FYV for the company codes and the controlling area can have a different number of special periods. The number of posting periods must be the same.
    Impact of warning message: You cannot create one controlling area for both company codes (1:n assignment).
    If you like, you can create one controlling area for one compnay code with FYV A1 and another controlling area for another company code with FYV B1.
    PS: Please reward the points if you find the answer as useful and rewarding points is a way of saying thanks.

  • One parameters should pass two Infotypes at different times

    I have two Infotype 0014 & 0015 which needs to be passed to the Class Z_CUSTOM_CLASS method CHECK_EGLIBILITY, Can any body help me in passing these Infotypes at different times but only through One Parameter ( IMPORTING or changing ) .
    I need to know the TYPE or LIKE or Type Ref to for that Par1 ?
    I dont want to specify two parameters each defined based on the structure of P0014 or P0015.
    Z_CUSTOM_CLASS => CHeck_ELIGIBILITY
    importing
    par 1  = 0014
    or 
    Z_CUSTOM_CLASS => CHeck_ELIGIBILITY
    importing
    par 1  = 0015
    the class should be able to process both infotypes, the developer who uses this method would be given Privilege whether to pass 14 infotype or infotype 15 depending on situation.
    it would be of great help if you can show some sample code.

    You can use PRELP structure to type this parameter. This would work similary to customer exits ZXPADU01/02
    data p0014 type p0014.
    data innnn type prelp.
    "before passing to method cast it to PRELP structure
    CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PNNNN_TO_PRELP
    EXPORTING
    PNNNN = p0014
    IMPORTING
    PRELP = INNNN.
    "then pass it to method
    Z_CUSTOM_CLASS => CHeck_ELIGIBILITY
    importing
    par 1 = innnn.  "type PRELP
    "in method cast it back to either p0014 or p0015
    data: p0015 type p0015,
             p0014 type p0014.
    case innnn-infty.
    when '0014'.
       CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
         EXPORTING
           PRELP = INNNN
        IMPORTING
          PNNNN = p0014.
       "your coding here
      when '0015'.
       CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
         EXPORTING
           PRELP = INNNN
        IMPORTING
          PNNNN = p0015.
       "your coding here
    endcase.
    Regards
    Marcin

  • How do I use iTunes on one computer to manage two iPads with different contents?

    I just bought an iPad Air 2 and want to use it with iTunes on my MacBook Pro.  No problem so far!  However, I want to continue to use my "old" iPad 2 for my wife and want to keep managing it as I always have using iTunes on my MacBook Pro.  The thing is that I want to make it possible for the two iPads to have quite different content to allow for the different needs and tastes of my wife and me.  How should I go about this?
    Thanks for any help.

    Hi Brett,
    Thanks very much for the information.
    I took a look at it but it seems to be aimed solely at "media" on an iPad, i.e. movies, music, TV shows etc.  This is fine, but I also want to be able to deal with all the apps on each iPad too, so that when I connect each iPad to my MacBook through iTunes, the synching process works just like it always has for my first iPad (an IPad 2).  I don't mean that I want all the apps on both iPads to be the same (my wife doesn't need all the apps that are on the iPad 2 at present), but I do want to be able to add/remove/update media and apps on each iPad, and update the iOS on each iPad. 
    Basically, I guess, I want a situation whereby when I plug in either of the iPads, iTunes recognizes each as a separate device and has a totally separate "library" (backup?) of music, movies, TV shows, etc. and — most importantly — apps.  Is that possible?
    Regards,
    Chris

  • Does it matter if you are sharing one email account with two phone numbers

    I am trying to facetime with my wife. We share the same email. but have two different phone numbers. on her end it says she is unavailable for facetime. Any help would be great. Thanks.

    The 'extension' cords are all compatible with all of the power bricks for Apple portables (PowerBooks, MacBooks, MacBook Pros, etc.). I also have several from many generations (back to early PowerBooks) and I use them all interchangeably with current adapters (in various rooms at home, at work, etc.).
    (As a side note, they are not compatible with the iPod power bricks, but that's not relevant for you.)

  • Problem comparing one line of a file to a different line

    Hey guys,
    i have a list of emails with a bunch of duplicates and i want to have one of each address. The logic behid the program is it would read in the first email, see if its in the second email list. If the email isnt in the new list it would print it to the new list and go to the second email adress and repeat the prossess.
    can you please help me fix this program so it would do this?
    Thanks guys
    //DuplicateRemover2.java
    import java.util.*;
    import java.io.*;
    public class DuplicateRemover2
         public static void main (String[] args)
              FileOutputStream out;
              PrintStream p = null;
              String fileName = "newemails.txt", fileLine = "", email = "emails.txt";
              Scanner file = null;
              Scanner otherfile = null;
              Scanner s = new Scanner(System.in);
              String listname = " ", scanname = "";
              int count = 0;
              try
                   file = new Scanner(new File(email));
                   out = new FileOutputStream(fileName, true);
                   p = new PrintStream( out );
                   otherfile = new Scanner(new File(fileName));
              catch (Exception e)
                   System.out.println ("Error writing to file");
                   System.exit(-1);
              while (file.hasNext())
              scanname = file.nextLine();
                   while (otherfile.hasNext())
                   count = 0;
                   listname = otherfile.nextLine();
                   if (listname.equals(scanname))
                   count++;
                   if (count == 1)
                   p.println (listname);
    }

    morshed_nsu wrote:
    Take an Arraylist object. After reading every email address, check if it is in the arrayList or not. If not then put it into the arrayList and write it to the out file. If it is in the arrayList read the next address.The set (suggested in the previous post) already does this check for you. You can only add something to a set that does not already exist in the set, there is no need to perform this check yourself.

  • How do you share one apple Id with two phones

    I would like to know how to add a second iPhone to my apple account

    What do you mean " add a second iPhone to my apple account"?

Maybe you are looking for