CER upgrade from 8.6 to 10.5- Refresh Upgrade COP file

I am looking for the RU COP file specific to CER 10.5, there is no COP file available under CER 10.5 download section . There is a COP file available under 10.0 ( v1) that is only for RHEL 5.
Version 1.5 COP file available only for CUCM/CUC/IMP
Can any one point me to the right location of this file ?
Thanks,
Unni

Hello Unni,
COP file name- ciscocm.cer_refresh_upgrade_v1.1.cop.sgn
You can download this file from below link-
https://software.cisco.com/download/release.html?mdfid=284367049&flowid=45907&softwareid=282074227&release=2960-3560-switches&relind=AVAILABLE&rellifecycle=&reltype=latest
“Read me” of this file says “This patch can be applied on only CER 7.1, 8.0, 8.5 and 8.6 release”
Thanks,
Dhiraj Sharma

Similar Messages

Lightroom 6 is up and running. Upgraded from LR5. However I want to change the file name to be more generic, e.g., description in LR5 references LR5 and I want to change that to just John G's LR Catalog/Library.lrcat. How can I accomplish this without

Lightroom 6 is up and running. Upgraded from LR5. However I want to change the file name to be more generic, e.g., description in LR5 references LR5 and I want to change that to just John G's LR Catalog/Library.lrcat. How can I accomplish this without fouling everything up?

Ok, well you'll need to do something like this. Now this part is a little dependent on your database server:
       try {
            Class.forName("org.gjt.mm.mysql.Driver").newInstance();
            Connection c = DriverManager.getConnection(
                                                       "jdbc:mysql://{database-server}/{database-name}:3306?user={username}&password={password}");
            Statement Stmt = c.createStatement();
            int count = Stmt.executeUpdate(cmd);
            if(count>0) {
                 System.out.println("count: " + count);
        } catch (Exception e) {
            e.printStackTrace();
    }That was some sample code for a MySQL database.
Note that the applet can only contact the server that is was loaded from, so you might want to do a getCodeBase() or something like that to get the server address.
Hope this is helpful.

I just upgraded from PS cs4 to cs6. All of my files open up viewing at .0625% - which is very irrita

I just upgraded from PS cs4 to cs6. All of my files open up viewing at .0625% - which is very irritating. How can I change this?

Are you on a Mac or PC? If the former, do you have the Application Frame visible?
Could you post a screenshot of how Photoshop CS6 looks when you first open an image and have it show at the tiny size?
Chances are you've made the main Photoshop window small, which is causing it to try to fit a newly opened image in too small a space.
I'm going to make a wild guess that you're on a Mac, and have dragged the bottom edge of the Photoshop window up instead of turning off the Application Frame, so as to be able to see your desktop.
-Noel

Upgrading from CS3 to CC. Should I upgrade to CS5 or CS6 first to be sure my older files will still function?

I want to upgrade, but I want to do it smart so my files will all still open and work. Now at CS3, do I need upgrade to say, CS5 or CS6, before going to CC?

No need for that. Older files will always open.
(The other way around can sometimes be more difficult, in case of new features that weren't there in the old PS version. But that too usually works with the "maximize compatibility" option checked).

Upgrade From Exchange 2010 SP1 to SP3 - Schema Upgrade Question

Hello,
We're currently running Exchange 2010 SP1 in our environment and want to upgrade to SP3. I just had a couple of questions related to preparing AD for this new SP that I was hoping that someone could answer.
Setup
We have a single forest with two domains within it (A and B for example). The schema master is in Domain A but this domain doesn't contain any Exchange 2010 servers. Domain B contains our 2010 CAS and Mailbox servers.
Both domains have Windows 2003 SP2 domain controllers.
I understand that before I proceed with the upgrade to SP3, I first need to update the AD schema on our schema master. I was planning on doing the following :
Log onto an existing Windows 2008 R2 64 bit "member" server in domain A (containing the schema master) with an account which is a member of the Schema Admins and Enterprise Admins groups.
Run SETUP.EXE /PrepareAD.
Do I need to also run SETUP.EXE /PrepareDomain on domain A as well or does the /PrepareAD sort this out ?
I was then going to turn my attention to domain B (which contains the 2010 CAS and Mailbox servers) and do the following :
Log onto an existing Windows 2008 R2 64 bit 2010 Mailbox server with an account which is a member of the Domain Admins and Enterprise Admins groups.
Run SETUP.EXE /PrepareDomain
Is this the correct procedure to follow ? I assume that I can then go ahead and start to upgrade the Exchange 2010 SP1 servers in the following sequence :
CAS\HUB Server(s)
Mailbox Server(s).
Clarification on the AD upgrade steps would be appreciated.
Thanks
Mark

This has all the info you need:
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
Prepare Active Directory and Domains
and
http://technet.microsoft.com/en-us/library/bb629560(v=exchg.141).aspx
Upgrade Exchange 2010 to Exchange 2010 SP1, Exchange 2010 SP2, or Exchange 2010 SP3
Note: There is no harm in simply running setup/PrepareAllDomains.
You should break out each Prep step since you have multiple domains:
setup/PrepareSchema
setup /PrepareAD
setup /PrepareAllDomains
you can run all of these from the same DC you run the setup/PrepareSchema step!
Twitter!:
Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

How to upgrade from OCS 904 to 10g but not upgrading Oracle Files

Hi All,
We have installed OCS 904 from where we only are using:
- Portal
- Oracle Files
Our idea is to upgrade this installation to OCS 10g but keeping the same version of Oracle Files (we don't want to migrate to content services for the moment).
Is this possible? or if we want to keep Oracle Files we need to do a fresh install of OCS 10g in another location?
Thanks in advance,
Harvey

>I want to upgrade it from RHEL 6 TO RHEL 7 and from ORACLE 11G TO ORACLE 12C. I wonder if anyone could suggest the best url for for upgrading accordingly.
which metric measures best? Fewest keystrokes?
BTW - you are actually doing 2 upgrades. You are upgrading OS & you are upgrading Oracle version.
So you can either over then up or up then over.
How much down down time is available?
How much risk do you want to include?

Can I upgrade from SP2010 SP1 to Sp2013 Sp1 without upgrading to SP2010 SP2 first

Hi
I have a farm currently on Sp2010 Sp1 running on Windows 2008 R2.
I want to upgrade to Sp2013 SP1 running on Windows 2012 R2.
Do I need to upgrade the Sp2010 SP1 farm to SP2010 SP2 before I upgrade to Sp2013 SP1.
The plan is to build SP2012 R2 first followed by installing SP2013 Sp1.
The we will then move the content database (119 GB with 500GB of Remote Blob Storage) from Sp2010 environment to the Sp2013 Sp1 environment and use the PowerShell command Upgrade-SPContentDatabase to do the upgrade. But do I need to upgrade
SP2010 SP1 to SP2010 Sp2 before moving the content database to Sp2013 SP1 environment.
Thanks
Nigel
Nigel Price NJPEnterprises

Yes, you can actually go from SharePoint 2010 RTM to SharePoint 2013 (any build). The only exception to that is if you're using RBS on SharePoint 2010, then you must have applied SharePoint 2010 SP1 first.
The December 2012 CU for SharePoint 2010 does have a wide list schema check, so it may be a good idea to apply that prior to the upgrade to 2013, but it isn't a requirement.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Does upgrading from 10.6.6 to 10.6.7 change files in Documents?

Does such an upgrade change or modify my files in the Documents folder?

No. Back them up first.
(57364)

Upgrade from Logic Express 9 to 9.01 - Upgrade wont recognize my software although it is in the application folder. Any ideas?

My Logic Express 9.0 is definetly in the Applications folder but the upgrade doesnt find it or says that it is ineligable. Any ideas?
thanks,
prose music

Hi
Make sure that your Logic Express app is a) in the Applications Folder (and not in another folder inside Applications), and b) that it is named "Logic Express" with no numbers or spaces after the name.
CCT

Installing Acrobat 9 Pro on a virtual machine on my Mac using Parallels. Not an upgrade but being asked what I upgraded from.

I'm installing Acrobat 9 Pro for Windows on a virtual machine on my Mac (running Parallels). I successfully installed the same program using the same discs on the same Mac previously, but that virtual machine became corrupt and can no longer be launched. For this re-installation, the installation sequence is asking what version I upgraded from - but as this is not an upgrade, I get stuck at that step and am unable to complete the installation. What should my next step be?

Hi Akselowner,
This error usually comes up if the serial number you are using is an Upgrade serial number.
In such a case the installer will prompt to enter the previous qualifying version serial number.
Please send me a private message with the serial number and I will validate and confirm that for you.
If you do not have the previous qualifying version serial number then the current serial number needs to be unlocked.
Please contact our customer service so that they can do the needful for you. You can even reach our chat support at http://adobe.ly/yxj0t6
Regards,
Rave

Upgrade from Windows Server 2012 Active Directory to Windows Server 2012 R2 Active Directory

We are currently running Windows Server 2012 Active Directory and would like to upgrade to Windows Server 2012 R2 AD. Is it OK to just do an in-place upgrade, or is it advisable to build new domain controllers on R2? Are there any guides or articles anyone
can recommend?

Hi Ginandtonic,
To upgrade DC(Domain Controller) from windows server 2012 to windows server 2012 r2, please refer to these articles:
Upgrade from windows Server 2012 to 2012 R2
Upgrade Active Directory from 2012 to 2012 R2
I hope this helps.
Best Regards,
Anna

What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

hai
What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
please provide sufficient material
points will be rewarded
regards
v.sridhar

Hi Sridhar,
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
Select the Solution Area like Financials, Human Capital Management, Sales....
Select module like MM, PP, SD, and QM.....
Click on Search
then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
And also check the release notes of ECC 6.0 in service.sap.com.
When you are upgrading from 4.6C to ECC6
Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't require solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Major difference is ECC6 is netwear product having WASJAVA+ABAP
secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
Please go through the link that is shown here and if there is any doubts then feel free to ask.
Major difference is ECC6 is net weaver product having WASJAVA+ABAP
secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
ECC6.0 supports UNCODE.
For installing 4.6 you don't required solution manager key. It only having ABAP stack.
4.6C supports NONUNICODE.
Please also Refer sdn thread and make a small search where u can find lot of information Reg this
olution Browser would give the differences (Features):
http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
Release Info:
ECC 6.0:
http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
Refer below and search for posts on this topic on sdn
There are so many differences between the version in different objects
I
These are the some of the settings that are differed in the two versions and in that two objects
Please visit the following links:
http://service.sap.com/erp
http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
For Functionality Differences pls refer to the below site -
http://solutionbrowser.erp.sap.fmpmedia.com/
Upgrade from 4.6c to 6.0 ECC
upgrade from 4.7 to ecc 6.0
Please Do Reward If Really Helpful,
Thanks and Regards,
Sateesh.Kandula

Upgrading From XP - What you need to know

Hi,
As many of you are aware, support for Windows XP ends on April 8th 2014.
What does it mean?
End of support means that Microsoft will no longer issue Windows Updates for XP to maintain the security and integrity of the Operating System.
Do I Need to Upgrade?
If you are currently using Windows XP for every day activity then it is recommended to upgrade to a supported version of Windows to ensure you are receiving important security updates for your operating system.
In addition to updates, you may also experience compatibility issues with new hardware such as a new printer, document scanner, webcam etc. Most vendors will also move away from writing XP compatible drivers.
I subscribe to security and antivirus software, Do I need to upgrade Windows?
In short, Yes. While these antivirus and security packages do a good job in most cases, they do not unfortunately provide the relevant necessary security updates to maintain the integrity of the operating system. In fact most antivirus packages are reliant
on the operating system updates to maintain security.
Must I Upgrade To Windows 8?
This is a personal choice. Windows 8 is the latest Microsoft operating system, you can also upgrade to any supported operating system such as Windows Vista, Windows 7 or indeed Windows 8. The only obstacle is to find a vendor that still sells licensing for
the older products.
How can I check If My Computer Is Ready For Windows 8
Windows Upgrade Assistant will assist you to check your computers compatibility with Windows 8
Here is a summary of the system requirements:
Processor: 1 gigahertz (GHz) or faster
RAM: 1 gigabyte (GB) (32-bit) or 2 GB (64-bit)
Free hard drive space: 16 GB (32-bit) or 20 GB (64-bit)
Graphics card: Microsoft DirectX 9 graphics device with WDDM drive
I don't know if my computer is 32bit or 64bit
You will be glad to know that Windows 8 comes with both 32 bit and 64 bit versions.
To see whether a PC running Windows XP is capable of running a 64-bit version of Windows, do the following:
Click Start.
Right-click My Computer, and then click Properties.
If "x64 Edition" is listed under System, your processor is capable of running a 64-bit version of Windows.
If "x86 Edition" is listed then its a 32bit installation
Where can I get Windows 8?
Your local computer store should be able to assist you with a copy. Windows 8.1 is the current version.
You can also use the
Microsoft compare and decide website to determine which version you require and select the buy now option for online purchase.
How Do I Install Windows 8?
It is important to note that upgrading from XP to Windows 8 will not retain your files. You should back up your files prior to upgrading either by using an external hard drive, or using
Sky Drive which is Free
Microsoft's Put Together An Upgrade Procedure From XP/Visa to Windows 8
It is also important to note that installing from DVD will require your system to have a DVD drive or if purchasing online you will need a DVD writer drive to write the installation DVD prior to installation.
Feel free to ask any questions which are not covered above.
Regards,
M
If you find my information useful, please rate it. :-)

I don't set out to sell anything, I'm an independent writer tasked with writing stuff about things to inform people. We link stuff to help people find things if they want to buy them, but the above isn't a sales pitch, it's info to help people figure out if they want or need something.
I didn't know that there was a cabal of antenna dealers who have been promulgating a myth (as a writer: nicely done there) about the nature of NTSC and ATSC; I hadn't ever considered that the antenna market was that large. When I received the request to write an article about antennas I was actually surprised; antennas don't have the support of major telecommunications companies and I sincerely doubt that there's going to be a run on them because of this article. I saw this as a bit of a public service opportunity to talk about a technology that a small segment would be interested in.
Anyway, I'm not sure we're going to get much farther on this; yes Best Buy sells antennas, but no, they didn't ask for an ad. They asked for an article that focused on how these antennas work and what to look for. Thank you for adding your insight about ATSC - I think that was actually covered in paragraphy three, but it's nice to see it spelled out more directly.
Have a nice day - and if you'd like to discuss this directly, please send me a DM on twitter @thetechnogram

Install from Recovery partition after upgrade from 10.9

Hi all, on my MacBook 13" nov. 2012 I upgraded from Mavericks to Yosemite using the standard upgrade.
After a couple of days I decided to perform a clean install:
- formatted "Macintosh HD Partition"
- rebooted with cmd+R
- reinstalled from recovery partition.
Is this really a clean install or my recovery partition contains pieces of the old Mavericks?
Thanks in advance for answering
Paolo

paolo_italy wrote:
First I upgraded from Mavericks to Yosemite (with no erase). Then I booted from recovery partition, erased Macintosh HD partition and installed Yosemite.
My question is: did I perform a really clean install or to be sure I had to erase the entire disk and recover from the Internet?
Paolo
You performed a clean install of OS X Yosemite.
You were in the Yosemite Recovery HD.
You erased the Macintosh HD which erases the previous OS install, user accounts and data files -- everything! Then you reinstalled JUST OS X Yosemite.

Upgrade from Final Cut Express to Pro 5.0

I think I made a stupid mistake. I purchased Final Cut Pro 5.0 upgrade thinking I could upgrade from Final Cut Express. But when I am asked to enter the previous versions serial number, it does not accept it. Is there any way to do this or am I going to have to buy the full version of Final Cut Pro?
Also, I have a G4 Powerbook with the following specs. Is it going to run the program if I do finally get it installed?
CPU Speed: 867 MHz
L2 Cache (per CPU): 256 KB
Memory: 640 MB
Bus Speed: 133 MHz
NVIDIA GeForce4 MX

To upgrade from FCE you need the Final Cut Pro 5 Upgrade from Final Cut Express. I just upgraded FCE and that worked fine for me.
Hope this helps answer your question...

CER upgrade from 8.6 to 10.5- Refresh Upgrade COP file

Similar Messages

Maybe you are looking for