Certain album causing crash

I did a search for this but I couldn't find a similar problem...
I have a certain album that is causing iTunes to crash when syncing my iPhone. I've found that the band-aid for my problem was to just uncheck the entire album, but is there anything I can do to permanently remedy this? I can't delete and re-download the album because I bought it off iTunes a long time ago, and I won't buy another copy.

Does it play OK in itunes? If so, some folks have had luck converting files to another format, such as MP3, after setting import options to MP3.
If it won't even play in itunes, then it's probably gotten corrupted somehow. Unless you have a backup, you're out of luck.

Similar Messages

When I plug in my Lacie Firewire 800 drive it causes certain apps to crash. Chrome will immediately crash when I open it, so will DVD player. It's only when I plug in my Firewire 800 drive, USB does not cause issues. What's the deal?

When I plug in my Lacie Firewire 800 drive into my Mid-2009 Macbook Pro running Mountain Lion - 10.8.2, it causes certain apps to crash. Chrome will immediately crash when I open it, so will DVD player. It's only when I plug in my Firewire 800 drive, USB does not cause issues. What's the deal?
I've restarted, verfied the disk, repaired permissions, smc reset.. don't know what else to do..

Contact Lacie since it's their product you are having issues with.

Windows xp, minidump, applemtm.sys caused crash

hi, my mbp just crashed in windows xp.
remained minidump said, applemtm.sys caused crash...
^^ i know this info is too little figure out the problem...
but, is there anyone faced like this one?
-------- minidump -----
ATTEMPTEDSWITCH_FROMDPC (b8)
A wait operation, attach process, or yield was attempted from a DPC routine.
This is an illegal operation and the stack track will lead to the offending
code and original DPC routine.
Arguments:
Arg1: 00000000, Original thread which is the cause of the failure
Arg2: 00000000, New thread
Arg3: 00000000, Stack address of the original thread
Arg4: 00000000
Debugging Details:
*** Kernel symbols are WRONG. Please fix symbols to do analysis.
* Your debugger is not using the correct symbols *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* Type referenced: nt!_KPRCB *
* Your debugger is not using the correct symbols *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* Type referenced: nt!KPRCB *
* Your debugger is not using the correct symbols *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* Type referenced: nt!_KPRCB *
* Your debugger is not using the correct symbols *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* Type referenced: nt!KPRCB *
* Your debugger is not using the correct symbols *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* Type referenced: nt!_KPRCB *
* Your debugger is not using the correct symbols *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* Type referenced: nt!_KPRCB *
* Your debugger is not using the correct symbols *
* In order for this command to work properly, your symbol path *
* must point to .pdb files that have full type information. *
* Certain .pdb files (such as the public OS symbols) do not *
* contain the required information. Contact the group that *
* provided you with these symbols if you need this command to *
* work. *
* Type referenced: nt!_KPRCB *
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the NT_SYMBOLPATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
* Symbols can not be loaded because symbol path is not initialized. *
* The Symbol Path can be set by: *
* using the NT_SYMBOLPATH environment variable. *
* using the -y <symbol_path> argument when starting the debugger. *
* using .sympath and .sympath+ *
FAULTING_MODULE: 804d9000 nt
DEBUGFLR_IMAGETIMESTAMP: 47685ec5
CUSTOMERCRASHCOUNT: 1
DEFAULTBUCKETID: WRONG_SYMBOLS
BUGCHECK_STR: 0xB8
LASTCONTROLTRANSFER: from 80547c4b to 804fbf0e
STACK_TEXT:
WARNING: Stack unwind information not available. Following frames may be wrong.
bacd3c8c 80547c4b 000000b8 ffffffff 00000202 nt+0x22f0e
bacd3ce4 b7e06569 00000000 00000000 00000000 nt+0x6ec4b
bacd3d10 b7e4be4a 8a1711d8 00000000 8a451e08 Wdf01000+0x15569
bacd3d2c b7fcb53b 8a171290 75dc0430 8a23fbc8 Wdf01000+0x5ae4a
bacd3d4c b7fcb651 75bae3b8 8a00de70 bacd3da8 applemtm+0x53b
bacd3d5c b7e261b2 760ef150 75dfc680 bacd3d80 applemtm+0x651
bacd3da8 b7e26253 b7e57a08 8a203978 89f10ea8 Wdf01000+0x351b2
bacd3dc0 b7dfd5d3 8a00df97 8a203978 00000000 Wdf01000+0x35253
bacd3ddc b7dfd68d 01f10ea8 8962e450 bacd3e08 Wdf01000+0xc5d3
bacd3dec 804f280d 8a46c5a8 8a00de70 89f10ea8 Wdf01000+0xc68d
bacd3e08 804f36b0 8a46c5a8 8a00de70 8962e450 nt+0x1980d
bacd3e38 b99210d5 8a00de70 88da4980 8a2d3028 nt+0x1a6b0
bacd3ea0 b9921d47 895bd170 00000000 8a2d37d8 USBPORT+0xa0d5
bacd3ed0 b9922944 026e6f44 8a2d30e0 8a2d30e0 USBPORT+0xad47
bacd3f08 b992413a 8a2d3028 80548abc 8a2d3230 USBPORT+0xb944
bacd3f34 b993224b 8a2d3028 80548abc 8a2d3028 USBPORT+0xd13a
bacd3f70 b99323c2 8a2d3028 00000001 8a34a834 USBPORT+0x1b24b
bacd3f8c ba6b8d54 8a2d364c 6b755044 00000000 USBPORT+0x1b3c2
bacd3fbc 8a34adb2 8a34a310 b993225c bacd3fd0 sptd+0x11d54
bacd3fc0 8a34a310 b993225c bacd3fd0 80547e6f 0x8a34adb2
bacd3fc4 b993225c bacd3fd0 80547e6f 8a2d364c 0x8a34a310
bacd3fc8 bacd3fd0 80547e6f 8a2d364c 8a2d3028 USBPORT+0x1b25c
bacd3fcc 80547e6f 8a2d364c 8a2d3028 00000000 0xbacd3fd0
bacd3fd0 8a2d364c 8a2d3028 00000000 00000000 nt+0x6ee6f
bacd3fd4 8a2d3028 00000000 00000000 b401ff4a 0x8a2d364c
bacd3fd8 00000000 00000000 b401ff4a 6803fe95 0x8a2d3028
STACK_COMMAND: kb
FOLLOWUP_IP:
applemtm+53b
b7fcb53b ?? ???
SYMBOLSTACKINDEX: 4
SYMBOL_NAME: applemtm+53b
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: applemtm
IMAGE_NAME: applemtm.sys
BUCKET_ID: WRONG_SYMBOLS
Followup: MachineOwner
---------

My MBP crashed with exactly the same dump. The crashes occurred during a StandBy operation (My MBP crashed regularly but not reproducably while trying to stand by/sleep).
Microsoft (R) Windows Debugger Version 6.9.0003.113 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Documents and Settings\vas\Desktop\Mini070508-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: srvc:symbolshttp://msdl.microsoft.com/download/symbols
Executable search path is: c:\windows\i386
Windows XP Kernel Version 2600 (Service Pack 2) MP (2 procs) Free x86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 2600.xpspsp2rtm.040803-2158
Kernel base = 0x804d7000 PsLoadedModuleList = 0x8055c700
Debug session time: Sat Jul 5 22:53:49.999 2008 (GMT-7)
System Uptime: 0 days 22:33:47.814
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck B8, {0, 0, 0, 0}
* WARNING: Unable to verify timestamp for applemtm.sys
* ERROR: Module load completed but symbols could not be loaded for applemtm.sys
Probably caused by : applemtm.sys ( applemtm+53b )
Followup: MachineOwner
1: kd> !analyze -v
* Bugcheck Analysis *
ATTEMPTEDSWITCH_FROMDPC (b8)
A wait operation, attach process, or yield was attempted from a DPC routine.
This is an illegal operation and the stack track will lead to the offending
code and original DPC routine.
Arguments:
Arg1: 00000000, Original thread which is the cause of the failure
Arg2: 00000000, New thread
Arg3: 00000000, Stack address of the original thread
Arg4: 00000000
Debugging Details:
CUSTOMERCRASHCOUNT: 1
DEFAULTBUCKETID: DRIVER_FAULT
BUGCHECK_STR: 0xB8
PROCESS_NAME: System
LASTCONTROLTRANSFER: from 80544c3b to 804f9c12
STACK_TEXT:
bace7ccc 80544c3b 000000b8 ffffffff 00000202 nt!KeBugCheck+0x14
bace7cdc 8054498b bace7d24 88d3b418 bab40120 nt!ScPatchFxe+0x46
bace7cf0 80502b17 88d3b488 88d3b418 804fad6c nt!KiSwapContext+0x2f
bace7cfc 804fad6c 00000000 00000000 8a19a4b0 nt!KiSwapThread+0x6b
bace7d24 b7022569 00000000 00000000 00000000 nt!KeWaitForSingleObject+0x1c2
bace7d50 b7067e4a 8a0c2a30 00000000 8a37efb0 Wdf01000!FxWaitLockInternal::AcquireLock+0x3a
bace7d6c b939853b 8a0c2ae8 75e65b78 8a19a480 Wdf01000!imp_WdfWaitLockAcquire+0xc9
WARNING: Stack unwind information not available. Following frames may be wrong.
bace7d8c b9398651 75c81210 89eee008 bace7de8 applemtm+0x53b
bace7d9c b70421b2 764c7c80 7652beb8 bace7dc0 applemtm+0x651
bace7de8 b7042253 b7073a08 89ad4140 89b38378 Wdf01000!FxRequestBase::CompleteSubmittedNoContext+0x63
bace7e00 b70195d3 89eee12f 89ad4140 00000000 Wdf01000!FxRequestBase::CompleteSubmitted+0x97
bace7e1c b701968d 01b38378 88a9ed80 bace7e48 Wdf01000!FxIoTarget::RequestCompletionRoutine+0x195
bace7e2c 804f053f 8a053350 89eee008 89b38378 Wdf01000!FxIoTarget::_RequestCompletionRoutine+0x35
bace7e48 804f13e2 8a053350 89eee008 88a9ed80 nt!IopUnloadSafeCompletion+0x1d
bace7e78 b9843ee5 89eee008 892f5ee0 8a25c028 nt!IopfCompleteRequest+0xa2
bace7ee0 b9844b57 89bdc4a8 00000000 8a25c7d8 USBPORT!USBPORT_CompleteTransfer+0x373
bace7f10 b9845754 026e6f44 8a25c0e0 8a25c0e0 USBPORT!USBPORT_DoneTransfer+0x137
bace7f48 b9846f6a 8a25c028 80545aac 8a25c230 USBPORT!USBPORT_FlushDoneTransferList+0x16c
bace7f74 b9854fb0 8a25c028 80545aac 8a25c028 USBPORT!USBPORT_DpcWorker+0x224
bace7fb0 b9855128 8a25c028 00000001 89edc578 USBPORT!USBPORT_IsrDpcWorker+0x37e
bace7fcc 80544e5f 8a25c64c 6b755044 00000000 USBPORT!USBPORT_IsrDpc+0x166
bace7ff4 805449cb b3f6362c 00000000 00000000 nt!KiRetireDpcList+0x61
bace7ff8 b3f6362c 00000000 00000000 00000000 nt!KiDispatchInterrupt+0x2b
805449cb 00000000 00000009 0081850f bb830000 0xb3f6362c
STACK_COMMAND: kb
FOLLOWUP_IP:
applemtm+53b
b939853b ?? ???
SYMBOLSTACKINDEX: 7
SYMBOL_NAME: applemtm+53b
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: applemtm
IMAGE_NAME: applemtm.sys
DEBUGFLR_IMAGETIMESTAMP: 47685ec5
FAILUREBUCKETID: 0xB8_applemtm+53b
BUCKET_ID: 0xB8_applemtm+53b
Followup: MachineOwner
Message was edited by: tourist604

Certain albums won't play on Iphone but still play perfectly fine in Itunes

Since I updated my Iphone to IOS5, certain albums won't play. They work perfectly fine in Itunes on my imac and the still appear in my library on the Iphone, but it won't start playing. The strange thing is, they are all albums from this year. All the rest is working properly.
Allready tried importing the whole library again but that was a waste of time.

Having the same problem with only a few albums.
Any news on this issue?

A certain album won't download to my iPod

I buy physical copies of albums and download them to my iTunes then sync the ones i like to my iPod (touch. the older version (if that mattered)) but a certain album (the new One Direction Four album) i even made a playlist to put the album in a sync it individually but the the playlist folder synced all the songs didn't. also when i have my ipod plugged into my computer and click to see all the songs that are in it, i scroll down to look for the songs and they're all faded and there's a little dashed circle before the little check-mark. i can't click on it either.
sorry this is so long i just like to specific. please help me!

Never mind! The situation fixed itself somehow. Must've been a glitch or something.

My iPod no longer displays artwork for certain albums

Ok, so here's my problem. Every so often when I alter the artwork on my iPod with iTunes, I have to reset the artwork by clicking the "display album artwork on your iPod" checkbox in my menu, then clicking apply, and repeating the process to redisplay them. If I don't do this, sometimes I wind up with a black box where the artwork would normally be displayed when I peruse my iPod. I know that this is a common problem for some people so hopefully there are some on this site and know what I'm talking about. Anyway, to my current problem, when I attempted to do that last night, it was just about at the end of the progress bar when an error message appeared that said "The iPod 'name' cannot be synched. An unknown error occurred (-50)." So, because it didn't complete the cycle, certain albums no longer display the artwork. It's still there on my iPod when I go into iTunes, but when I go through the actual menus on my iPod such as Cover Flow etc. I instead see that annoying box with the musical note in it. Has anyone come across this problem before? I would very much appreciate a solution

I just tried it again and this time a different message showed up "The iPod 'name' cannot be synced. The required folder cannot be found." I have no clue what folder it could be talking about.

How do I share certain albums in my iphoto library with other users....

without using the fast user switching/sharing preference in iphoto?
I have about 12,000 photos in my library of which about 6000 are for work. I would like to share all of my non work photos with the other users on my imac. I would rather not use the fast user switching and keep the iphoto application open for all the users. I would like to either import only selected albums to the user account or add them to the shared folder for their access. How can I export/import only the albums I wish to share without having to do it manually for each? Should I make a copy of the library, add it to the other users accounts and then delete the photos? Or can I put the library in the shared folder and limit access to certain albums? I don't think it would make too much sense to have a duplicate library since I only have about 10GB left on my HD.

With iPhoto 6 you can place the source files, i.e. exported the full sized files for those albums you want to share, in appropriately names folders in the Shared folder. Then have each user create an new library with iPhoto's alias mode, i.e. create alias files of the source files instead of copying the a full sized version into the library. This way each of the other users can have a working library and you only have to have one copy of each file on the HD. Saves a lot of space. Any edits that one user performs will not be seen by the other users. If a user delete a photo from their library only the alias files is deleted. The source files are untouched.
The downside to this method is if you add a file(s) to the Shared folder each of the other users will have to import that file into their own library. An easy way around that is to always put new photos in new folders and let the others know there are new ones to import. You could also divide your library up into to two, keeping your work library a conventional one and removing the "shared" source photos and have a similar alias based library for the personal photos that are in the Shared folder. Then use iPhoto Library Manager or iPhoto Buddy to quickly switch between the two. I have 7 libraries that I use iPLM to switch between. It's very convenient and fast. If you want to convert over entirely to an alias system, both work and personal, here's a way to retain the keywords you've assigned to them. See tutorial #2 here.
G4 DP-1G, 1.5G RAM, 22 Display, 200G HD, 160G HD, 250G FWHD, QT 7.0.4P Mac OS X (10.4.5) Canon S400, i850 & LIDE 50, Epson R200, 2G Nano

Photoshop CS4 and graphic cards. Can cause crashing?

Since upgrading to CS4 I seem to have increased crashing.
Here are my system specs.
Mac 2 x 2.66 GHz Dual-Core Intel Xeon
9 GB of Ram
250 GB internal dedicated scratch disc
NVDIA GeForce 7300 GT with 256 VRAM
After having endless techs look at my machine and upgrading everything. I am beginning to suspect the graphics card.
With OpenGL can a underperforming video card cause crashing in photoshop especially with massive file sizes ( multilayered CMYK poster sized files the can exceed 7 GB)?

Did you install the 11.0.1 update?
Is your OS up to date with patches?
Have you tried disabling OpenGL in preferences to avoid using the GPU/Graphics card?

How do I archive certain albums in iPhoto?

Hi,
I am using a Macbook Intel core 2 duo, so it's a few years old now and my iPhoto '11 is running incredibly slow. I have over 12,000 photo's in the library so what I want to do is archive most of these photo's and get them out of iPhoto. I plan on putting them into an external hard drive.
I'm not sure if what I am asking is possible or not, but I have all my photo's in albums down the left hand side of the app, I want to be able to pick certain albums and archive them, taking the photo out of the library at the same time. I want this because ideally I'd like the photo's to stay in the albums I have put them in, not just archive 10,000 photo's in one big folder where I will never be able to search through them if I need to find a particular album in the future (so it needs to remain searchable on the external HD).
I have albums/photo's dating back 10 years and I'm looking to archive all the photo's that are older than 2 years or so, so I can keep my recent pics inside iPhoto but clearing out all the old stuff.
Please can someone help?

With 2gigs of Ram you're never going to have a fast machine as that's the bare minimum for 10.8, not to mind adding apps to it. You could thinnk of increasing the Ram for a start.
So if I just copy my current library by dragging and dropping it on the external, that'll literally copy it as it is. Then go through iPhoto on my computer deleting and sorting everything out as it is, then in the future if I want an old photo from the original library I can simply plug the external in, start the iPhoto app, but start it with the option key and select the library from the external, resulting in the original library opening up?
Yes.
Can I just quit iPhoto and then start it back up again with the 'new' library?
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Choose Library'
If I just copy that one 'iPhoto Library' icon in the 'Pictures', I assume it'll copy over all the original pictures aswell, so once I delete them from my computer after I've copied it to my external I won't lose the original photos. I.E it's not just copying links or thumbnails of the photos, it's moving over the picture itself?
Yes. if you have a default Managed Library:
Are you running a Managed or a Referenced Library?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

Album app crashes and other problems

I have my Z1 Compact for about 3 months now and I am countering bugs that effect the most basic uses of the phone.
- First the Album app crashes everytime I go to "Folders" it been like that before the latest update, and afterwards.
- The screen proximity sensor is not doing it's job. While I'm on a call sometimes my face touches different button like airplane mode, or while I'm getting a call and the phone is in my pocket my thigh touchs buttons and answer to calls.
- The favorite contact tab sometimes is blank, although I do have favorites.
- The Message app is slow and if I don't wait for it to complete sending a message and I go to the home screen, the app keeps it as draft although the message was sent..
- Camera sometimes freeze but that's been discussed enough.
- Other apps get stuck and crash sporadicaly.
I have to say that my 3 years old iphone 4 had less bugs, so its really hard for me to say I upgraded my smartphone.
Sony better do something about your own apps, because this phone doesn't worth the price and has many compatitors.

Since last version the Album cannot play gif. properly. Some image have enlarge and some pixels crack in both thumbnail preview and actual view . But the Favorite preview play just fine till I tapped to view and the same problem accure.
So I gave up on new version and back to factory version which kind of irritating....
Anyway I waited for this latest version. In this version the thumbnail preview look fine but when tapped to see the gif.still cannot played.
This doesn't make any sense
Why new version is worst than FACTORY VERSION
Thank you for considering

Why are certain albums like ones from Tool or Ozzy era black sabbath not available in the U.S. store

why are certain albums like ones from Tool or Ozzy era black sabbath not available in the U.S. store

Also, in some cases the artist will not allow download sales, or insists on a download store selling complete albums only rather than offering individual tracks, something Apple resists. In any case, it's not by Apple's choice; it's by decision of the content owners.

Static during a certain album but not others?

My iPod Touch 4th generation, with the latest update available, has static when I play a certain album. I've played other albums and just random songs not from that album and it works just fine, but when I play that certain album it has static. I got the album yesterday via a CD, I had purchased that day and brought it home and put it directly in the computer. I have played it on my computer and it works just fine.

I did, its still staticy on that one album.

AutoVue viewer caused crash while viewing .XSLX documents.

We use AutoVue Desktop Deployment Viewer incorporated in our application (using JNI). When viewing XLSX (Microsoft Excel) documents on Windows 8.1 x64 system it caused crash of application. It's reproducible only on Windows 8 (8.1 or Server2012) systems. If we set compatibility mode (Windows 7) then problem isn't reproducible.

I would recommend you log a ticket with customer support

File causes crash

Everytime I try to open a certain file, inDesign crashes. I really need the file. Help?

Moving this discussion to the InDesign forum. Can you please provide a few more details such as what version of InDesign you are using? Which operating system do you have installed? Do you receive an error message?

CC 2014 (18.1.0) | Text Field editing causing crashes (Windows)

Greetings;
I've noticed lately that when saving files from CC 2014 to a CS6 format - and having those files edited on Mac, in either CS6 or CC - when re-opening those files text fields have been causing crashes on the Windows client. When that same file is opened and text fields are edited on the Mac client, a prompt will just appear stating "Cannot Edit text" - yet it still allows it.
This has caused multiple issues for our teams as it has created files we're starting to refer to as "mine fields" - as working with the .ai file is like playing Russian roulette with text fields, you never know which one is going to crash the file.
I would love to work with a team member from Adobe to help find a resolution to the problem, and I'm willing to provide any additional details that might aid in that process.
Thanks!

Hello Pureweb,
Please upload the crashdumps on some file sharing website say Dropbox and share the link with us by sending a mail to "[email protected]". We will analyze the dump and will suggest you the workaround appropriately.
In parallel, please check that you do not have any 3rd Party plugins installed in it. Please try to remove them one-by-one and see which one causes the crashes or do reverse i.e. remove all the 3rd party plugins. Or Uninstall Ai and check at following location:
C:\Program Files\Adobe\Adobe Illustrator CC 2014
Please verify that nothing is left at above location on uninstalling Ai. Then try a fresh install and see if Ai works.
Also, verify that you have the updated Wacom drivers on your system. This might be an issue with the 3rd party program as well. One of the user who was having a similar issue reported on the Ai forum that one of the 3rd party Stahl's ImageWorx DTG RIP - a program for printing to a Direct To Garment printer was causing the issue. So, you may check if the similar thing is not happening in your case.
Regards,
Dhirendra

Certain album causing crash

Similar Messages

Maybe you are looking for