Certain instruments don't sound right

In Logic Express, a handful of instruments don't sound right and cut short since I upgraded to Mountain Lion. These are mainly in the Jam Packs, notably the Orchestra one. Instruments that don't sound right are Timpani, Vibraphone and a couple of other mallet sounds.
In an old project of mine (which uses the Timpani), when opened, it sounds exactly as it should, however if I change the instrument then change it back again, it sounds lower quality and the sound cuts short.
Any suggestions? Thanks!

Here is a link so that you can hear the problem - the first half is how it SHOULD sound, and the second half is how is sounds now!
http://soundcloud.com/mixmaestroal/timpani-example
I rely on these sounds! What has Mountain Lion done?!

Similar Messages

Software Instruments Don't Sound Like the Instrument?

I am new to GarageBand and find it has great functionality - I've been very quickly able to link up a MIDI keyboard, and mix that with some iTunes tracks etc to get the final output I want.
But there is one area where I think something must be going wrong and that's the sound that the various software instruments make. There are a huge variety of them, some of them with quite subtle differences between them according to the name. But many of them don't sound anything like the instrument they proport to represent.
Starting with pianos - when I'm creating tracks I frequently start with a piano playing the tune. However, most of the piano software instruments sound nothing at all like a piano.
Take Grand Piano as an example - this just sounds like an electronic keyboard. Pretty much the only piano instrument that sounds like a piano that I've been able to find is "Grand Piano on Stage".
Seems somehow like with only some of the instruments GarageBand is using the synth data to produce a real instrument sound and with others it is just playing an electronic tone that bears no relation to the instrument sound.
Has anyone else seen this problem?

it means those instruments are not actually installed on your machine, for some reason. you should reinstall GB:
http://www.bulletsandbones.com/GB/GBFAQ.html#reinstallgb
(Let the page FULLY load. The link to your answer is at the top of your screen)

Loops and certain instruments won't download properly

The loops won't don't download as well as certain instruments. Any help?

This is the WMP plugin: np-mswmp , so you have it.
You may be missing a codec to play that content or some extension or security software is blocking that content.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

My 17" Macbook Pro battery swelled up and kind of exploded. The apple genuis said it is still safe to use, that doesn't sound right.

I am just kind of worried that it doesn't even fit. Do I need to kind of pop the expanded portion of the battery to get it to fit back in? The case of the battery has come apart and so to fit it back in I would have to press it back together. The battery is low count and had great capacity when it happened. I don't want to have to buy another one when this one is fairly new.

... The apple genuis said it is still safe to use, that doesn't sound right.
I agree with you, that's not right.
This may seem to be a little problem - fix it before it becomes a big one.

CSV output (export to excel) don't use right code table

CSV output (export to excel) don't use right code table. We use code table
8859-2 (reports and forms are OK). Why export to excel don't use this code table.
Thanks for answers

You could also take the example from my blob that Denes mentioned and instrument it to output in either CSV or HTML. This way, you could have a single procedure that worked for both formats.
All you would need to do is handle each field differently - pad a TD and /TD (with proper brackets, of course) if its HTML or just append a comma if it's CSV.
Thanks,
 Scott 
http://spendolini.blogspot.com/
http://sumnertech.com/

New headset, but certain programs are transmitting sound through speakers and not headphones.

Spoiler (Highlight to read)
Hello,
Hello,
I just recently purchased a new headset for gaming but have been having some issues with it and the system sound. One major issue is when I call someone on skype, the sound from Skype or the call will go through the headphones, but any other audio comes out of the speakers. I have also notices that iTunes also does not function when I am in a call as well. Some examples would be if I were to want to watch a YouTube video while in a call, the sound would come through the speakers and not the headphones. However, I did find a fix for it. All I had to do was disable the main speakers and the audio was transmitted to the headphones. Another example would be if I wanted to run games via Steam (Garry's Mod, TF2, ect.), I wouldn't get any sound whatsoever from the game. Not through my speakers or headphones. With one exception, Garry's Mod volume I can hear through the speakers while in a Skype call, but I want the sound to come through the headphones. But with TF2, I get no sound whatsoever. If you need any more information about my issue, please feel free to ask. Thank you.
This question was solved.
View Solution.

Hello @LayneStaley,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how certain programs are transmitting sound through speakers and not the headphones, and I would be happy to assist you in this matter!
To ensure that your headphones are utilized when plugged into your notebook, I recommend following the steps below:
1. Click the Start button
2. Click Control Panel
3. Click on Hardware and Sound (sorting the control panel icons by "category"), and then click on Sound
4. Under Playback, you should see one or two speaker icons. One of them should already have a green checkmark next to it (which will be your notebook's main speakers). If the second Speakers icon is not visible, right-click in the list of devices and select Show Disabled Devices
5. A second, disabled icon of "speakers" should appear. Right-click this icon and click Enable
6. Select the newly enabled speaker device, right-click it, and select "Set as Default Device".
7. Click Apply.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

TS1292 reItunes card says "not activated correctly"... went back to stopurchased, they say it might take 24 hours. Does this sound right? where

I'm trying to REDEEM an itunes gift card.
I get a "card not activated correctly" message.
I go back to the store where purchased, I'm told card was activated, and to just wait 24 hours because Apple's networks are probably busy.
Does this sound right??

A brief and probably non-helpful answer: I know of no way to eliminate your large amount of duplicates other than by repetitive, tedious manual effort.
*There has got to be a simpler way.*
I hope you're right, but I don't think there is a simpler way.
BACKUP: It also appears that the only way I can back up the catalog is to shut down LR. Really?!
Yes, really

Pretty new to this, 2 recordings, doesn't sound right.. need help!

we had a narrator come into our own booth and record a lot of narration for us. She came back today to do some additions and corrections.
Used the same equipment, same booth, same everything, but for some reason it just doesn't sound right, it sounds "muffled" a little.. at least to me. I don't normally "clean" audio so I'm kind of lost. I haev the frequency analysis open and see the graph, and between 16000 and up its much much lower on the original recordings than it is on the ones done today.
Is there ANY way to try to get these matched up closely? All i've really tried is the EQ but that doesn't seem to get me very far.. what other things could I try... I'm really not an expert at this by any means!

This sort of problem has plagued everybody recording narrations for years - it's virtually impossible to get an identical sound between narration sessions unless you are seriously lucky. All it takes is for the narrator to have a slight cold in the head and be wearing different clothes - and they sound different if a direct comparison is made. Even worse is if they had a slight cold or whatever the first time around and are fine the next - you'd need them to get that cold again! And no EQ or anything else can even begin to compensate for this - the human ear is incredibly sensitive to the sound of voices, and even really subtle changes are very noticeable.
Best thing to do is to re-record sections, and not just corrections - you can often get away with this if there are breaks between sections. Even then it may not be right.
The way it has always worked for me is that if alternatives may be required, we do them all at the same sitting - and record a load of 'silence' too - that comes in more useful than you might ever imagine. And if it's critical, then re-record the whole thing - the amount of editing and correcting time required may well exceed the re-recording time, so often its worth it even though it sounds mad on the face of it.

How can I add a percssion instrument using creative sound bank mang

I have Creative Sound Blaster Li've 24bitHow can I add a percossion instrument using creative sound bank manger. I have a sound font for the Tabla which is an eastern percossion instrument. I want to use it in my MIDIs, But I don't know how. I use the creative sound bank manger and have no proplem with it, but I can't add a percssion. what should I do?

The link will look similar to
myPage.php?ID=myVariable

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

I do not have the 'Advanced' tab on the menu bar. I am trying to change ringtone on my iphone 4s. Have done the following: Right cick on song, entered the start and stop times, but unable to proceed as need 'Advanced' tab in order to change to option.

You don't need to upgrade your software. But if you're struggling with Spry, IMO you should cut your losses and switch to something better for the longrun.
If you have a budget to work with, I highly recommend Project Seven's Pop-Menu Magic 3. It's easy to use in DW CS4, 5, 6 or CC. More importantly, it's bullet proof and works in all devices.
Pop-Menu Magic3 by PVII (commercial DW extension)
http://www.projectseven.com/products/menusystems/pmm3/index.htm
If you don't have a budget to work with, you can roll your own menus with jQuery plugins. A bit more effort on your part, but they perform better than Spry.
jQuery Superfish
http://users.tpg.com.au/j_birch/plugins/superfish/
jQuery MegaMenu2
DEMO:
http://www.geektantra.com/projects/jquery-megamenu-2/
DOWNLOAD:
http://code.google.com/p/jquery-megamenu/
Nancy O.

In pages(not the New version) footer is over to the left, so when i put the page numbers in they don't sit right. How do i move the footer

In pages(not the New version) footer is over to the left, so when i put the page numbers in they don't sit right. How do i move the footer

The footer is not only to the left. To get the page number to the right you can use Format > Align right. That will make all page numbers move to the right. Is that what you want?

Certain websites don't play - add-ons or plug-ins interfere

I've been having strange problems for a couple of weeks. In general, my computer works okay, but certain websites don't manage to play videos or audio while others do. I tried disabling the av firewall to see if that was blocking anything, but it wasn't the cause. Both Flash Player and Java are fully installed, including the Firefox plug-ins and add-ons that are recommended for them, i.e., Shockwave player or Java updates. (Must I keep the old add-ons for Java if they are updated or should I disable them or delete them somehow?) Someone told me it could be my javascript, but that is checked off properly in options.
My CA av program found a "possible" Trojan over a month ago and located it in a particular java file, so I ended up deleting that file and reloading java. When I would go to java.com, it said I was full operational. Then I downloaded a couponprinter and kept getting told that I needed to load java. I reloaded it twice, but kept getting the same message. Yesterday, I woke up to find a message that Firefox recommended disabling a java plug-in because it makes the computer unstable. Only when I finally uninstalled java completely and reinstalled it, did it begin working fully and I no longer get that Firefox message even though the plug-in is installed. Coupons now print fine and my flash player seems to be operating, but one particular websites just doesn't display the audio player (it's a college radio station). I also developed a problem yesterday trying to open up a web pdf which I never had problems with before, but resolved it when I disabled the Adobe Firefox plug-in. Why would Firefox recommend a plug-in if it only hinders the use of websites?
Also, when I first followed Firefox's suggestions, I opened up Firefox in Safe Mode. When I returned to regular Firefox, the colors of the taskbars had changed - they're all pale grey - and I don't know why or how to change them to the warmer version I used to have. The tint did not come as a result of an installed theme or personality, but it's gone.
Anyway, I'm just confused because add-ons and plug-ins are added and then create new problems, when I thought they are supposed to resolve problems. Can you help me figure out how to get the player on the websites to open?

same problem here for the past two days till this morning when I created a new profile and removed ALL addons from the default profile. With the new profile with NO addons, I got to the sites with video that I had problem with and flash player did work.
Now, I only have three addons that have not created the problem; adblock, flashgot, and flashblock.
Create a new profile and check it out.

At the time of settlement of cost collector, I don`t see right FI entries.

HI,
at the time of settlement of cost collector, I don`t see right FI entries.
Сost collector is confirmed, WIP is calculated, variance is calculated. Cost collector has status VCAL.
Cost collectors saldo = 3000,00
WiP = 3500,00
Variance = -500,00
and it is right. But at the settlement I see
Factory Output (Cr.) & Price diff from Prod (Dr.) 3000
Where are WIP and Variances???. I don`t imagine any reason why system don`t see WIP and variances by settlement.
Best regards,
Yuy
P.S.
ML is active.
Edited by: Yury Pogorelov on Jul 5, 2009 9:59 PM

HI,
If there is more GI and less GR, system calculates WIP and values are posted to WIP G/L. That will be reversed to Cost object on next day of WIP run. This will not be considered for Settleemnt.
Variance is the calculation of actual and plan. That is just a calculation and nothing to do with any accouting entries.
U have got some 3000 in price diff. account and that has come from diff betweeen actual G/R and material master price of the material.
Vijay

I have done al the right things to set up home sharing for mine and my sons itunes lib but i still not getting the icon showing in the menu for us to select can anyne help?

Hi I have done all the right things to set up the home sharing, turned it on, aurthorised it with the same details, but we still have not got the home icon in the menu to select. can anyone help?

If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141

HT1338 I have added photos from iPhoto into Photo Stream and enabled my iCloud but I can't see any uploaded photos. Does this sound right?

I have added photos from iPhoto into Photo Stream and enabled my iCloud but I can't see any uploaded photos. Does this sound right?

Enable PhotoStream in iCloud first, then add the photos to PhotoStream in iCloud. Of course, you will need PhotoStream also enabled on your other devices also in order to view them.

Certain instruments don't sound right

Similar Messages

Maybe you are looking for