Certain mailboxes not showing the stored mails

After upgrading to OSX mavericks, mails in certain folders are not visible -- ony headers can be seen without the mail contents.
How to get it back ?

I had the same problem, and here is how I solved it.
Note that this is a bad trick, and I don't guarantee it will work for you, but it did for me.
Quit mail
Go to the ~Library/Mail folder (you can find the ~Library folder by holding the option key and choose to Go To menu in the menu bar).
There, you should see a V2 folder, with a Mailboxes folder inside.
In that Mailboxes folder, I had some of my corrupted mailboxes (the ones with the empty mails) and the same mailbox folder with a "-2" suffix. I deleted the mailbox and renamed the "-2" to remove the suffix.
Launch Mail again, that worked for me.

Similar Messages

Gmail mailboxes not showing up in Mail

In Mail, I see all of the mailboxes for "on my mac" but there is nothing for Gmail. At the top there's a place showing my Gmail inbox, but nothing showing any folders. Not even "Gmail" with an arrow to click. It's just "on my mac" and "RSS". I've looked at numerous discussions and made sure all of the settings are correct both in Mail and in my Gmail account. I even deleted the account and re-added it. I also have other e-mails linked to Mail, and none of them have any mailboxes that show up. When I try and add a new mailbox, having it under Gmail or any other e-mail account other than "on my mac" isn't even an option. My end goal is to add the mailboxes from "on my mac" into Gmail. Help!!

Not certain, but this can fix myriad Mail problems...
Safe Boot from the HD, (holding Shift key down at bootup), it will try to repair your Disk Directory while the spinning radian is happening, so let it go, run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these folder & file to the Desktop.
Move this Folder to the Desktop...
/Users/YourUserName/Library/Caches/Mail/
Move this file to the Desktop...
/Users/YourUserName/Library/Mail/Envelope Index
Reboot.

I cannot find imported mail boxes. if i try to setup a new mailbox, it shows the existence of the mailboxes that i am looking for in the location drop down menu. where would they be located?

i cannot find imported mailboxes. if i try to setup a new mailbox, it shows the existence of the mailboxes under location/on my mac. they do not show up in the mailbox list. where would they be located so that i can retrieve them?

Did you quite Mail and relaunch?
Your imported mail is stored in a new mailbox called “Import.” To reorganize imported messages, create new mailboxes and drag folders and messages from the Import mailbox to other mailboxes. When you’re done, you can delete the Import mailbox.
If you don’t see your mailboxes in Mail, choose View > Show Mailbox List; empty mailboxes aren’t imported.

I have a problem in the program update is not showing me e-mail not my

I have a problem in the program update is not showing me e-mail not my

Open Terminal.app located in Utilities folder in Applications folder.
Once Terminal is running use this command followed by hitting the return key.
drutil eject<hit return key>
CD/DVD should pop out.
Lou Cioccio

IPhoto is not showing photos stored in albums in the last week, and when I add recent photos, they don't show, or show as black.

iPhoto is not showing photos stored in albums in the last week, and when I add recent photos, they don't show, or show as black. What's happening ? I show an incompatible upgrade available for OSX Maveriks, which I have not yet installed.

What version of iPhoto are you using? Apply the two fixes below in order as needed:
Fix #1
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - run Option #4 to rebuild the database.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.
2 - click on the Add Library button and select the library you want to add in the selection window..
3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
4 - In the next window name the new library and select the location you want it to be placed.
5 - Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Anyone got a fix?

On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Yet another example of Mac caring not a jot about the performance of versions of OS and software running on on older hardware. Anyone got a fix by any chance? Oh and fyi I need to see the Bcc in sent items to confirm sent email is attaching to Salesforece - when I see the Bcc I know I can delete it as a copy will be in SForce. Big thanks W.

On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Yet another example of Mac caring not a jot about the performance of versions of OS and software running on on older hardware. Anyone got a fix by any chance? Oh and fyi I need to see the Bcc in sent items to confirm sent email is attaching to Salesforece - when I see the Bcc I know I can delete it as a copy will be in SForce. Big thanks W.

When pasting from Excell the table border is not showing in Yahoo mail

Dear Sir/Madam
I am mis execitive , preparing the reports in Excell and sending it through email. But when i paste something from Ms excell , the table borders lines is not showing in Yahoo mail.
Please help

Dear All ,
Even I got annoyed due to this stupid thing ,
Let me share you how i worked around this ,
(1)Once you copied the table from Excel or Open office Calc, to thunderbird mail , It will appear the table with dotted line.
(2)Now you have to double click in any single cell it will prompt the ‘Table properties’ box .
(3)Now click on ‘Table ’ tab and under ‘Borders and Spacing’ Section set ‘Border’ ‘1’ instead of ‘0 ‘
That’s it ... it will show you the border lines of table copied from source file 

I'm picking up all of the data script related to the sending / receipt of an e-mail along with the e-mail itself and can't find a way of not showing the text. Obviusly only a command but can't find it!

I'm picking up all of the data script related to the sending / receipt of an e-mail along with the e-mail itself and can't find a way of not showing the text. Obviusly only a command but can't find it! Help!

Shift-Command-H is the key-combo to switch 'Long Header'/'Standard Header' .
Long way: Top Menu -> View -> E-Mail
Stefan

I can not read my mails on my email screen. It does not show the messagew

Although te massages are showen in brief at hè leeft, the screen does not show THE whole message,

Try closing the Mail app completely and see if the email text shows when you re-open it : from the home screen (i.e. not with the Mail app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't fix it then try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Double clicking a new e-mail does NOT show whole e-mail

double clicking a new e-mail does NOT show whole e-mail unless I go to forward or reply. In other words, I may see a couple sentences, then it's just blank, no scroll bar either. This gets annoying. Anybody else get this or know how to overcome this?
eMac 800mHz Mac OS X (10.4.6)

Well, there is no such thing as an AOL type account in Mail. Such an account must be set up as either POP or IMAP. Nevertheless, knowing that the ISP for one of the accounts is AOL is useful because it seems that other people also have this problem with AOL -- see Chuck Coulson's and smackwell's posts in this thread.
I don't think I'll be able to help you with the AOL account other than telling you to try rebuilding the mailbox -- select the mailbox and choose Rebuild from the Mailbox menu. Have you tried that?
The problem shouldn't happen with the POP account, however. Do you experience the same problem with it as well?

Why this query does not show the result?

Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
ERROR at line 1:
ORA-00933: SQL command not properly ended
SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
no rows selected
SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
69662              HR                                 TABLE
                   OE                                 SYNONYM
SQL> SELECT USER FROM DUAL;
USER
SYS

Hi,
the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
Herald ten Dam
Superconsult.nl

MB1B: Variant transaction is not showing the message of document creation

Dear MM EXPERTS n GURUS,
When we create any document using T-Code MB1B, on successful posting it gives a message: Message no. M7060, Document 4900556951 has been saved and is stored in the database.
Now, we have created an variant of this Transaction (ZMB1B) and assigned this Z-Transaction to the user. Original Transaction (MB1B), has been blocked for that user, because - user should use only ZMB1B.
Problem is that after saving the document in Z-Transaction, user come out to main screen (SAP EASY ACCESS Screen) with a message You are not authorized to use transaction MB1B Message no. S#077
While document has been saved in database.
Why it is not showing the message - Message no. M7060, Document 4900556951 has been saved and is stored in the database.
Thanks in advance.
DSC

Dear GURUS n EXPERTS,
As I have mentioned in my previous thread - After creation of Variant if I block or not assigned the original T-Code i.e. MB1B, system gives message Message no. S#077 You are not authorized to use T-Code MB1B.
If I don't block the or assigned the Original T-code, there is chance to user will use original T-Code instead of variant.
How can we solve this problem.
Please advice.
With thanks,
DSC

How can I not show my e-mail address in "from" line when sending out e-mails?

I don't want to show the e-mail address in the "from" line when I send out e-mails. Is there a way to hide that?
Thank you!

whiskey sour wrote:
Okay here is where I am at so far and thanks for sticking with me, we may have success eventually! Can you confirm the following:
1--I Go into the iMac Address Book and click on File/Export/Address Book Archive.
2--It then asks me where I want to save Address Book and I indicate Desktop.
3--I then assume I somehow transfer this Desktop file to the iBook--can I just copy the file, email it to the iBook, and paste it into the iBook Desktop?
Yes
4--If I'm accurate so far, I then do the same with the iBook Archive and save it
to the iBook Desktop.
Yes
5--NOW I open the iMac archive that is on the iBook desktop and it will ask me if I want to overwrite the existing iBook address book and I indicate Yes and it will then place the iMac address book on the iBook.
Yes
6--When and if I want to put the iBook address book back into the iBook I click on the file that is on the iBook Desktop and proceed to put the 'old' iBook address book back in.
That's it.
If I am correct on this, another question arises--does this method transfer every email address I use as I notice in Address Book under 'All Contacts' there are some that are missing. I may not have manually added each and every address to my Address Book so maybe that is why some are missing and may not show up in this transfer of Archives? Thanks for your patience Barney.
That's what I would assume. Like I said, the Archive is really just a copy of the AddressBook folder which contains everything related to Address Book and Mail's previous recipients.
Now, the Address Book contacts and Mail's previous recipients are different entities--they just share the same storage location. So, if that is what you mean by there are some missing, they should still auto-complete in Mail since the previous recipients also is used for auto-complete.

How do I send an email with a group address and not show the addresses/names of the recipients?

How do I send an email with a group address and not show the addresses/names of the recipients?

Use BCC. That's blind carbon copy. And copy paste the address into the BCC field. It really depends what e-mail program you use how to enable BCC.

Certain characters not showing

I'm having a problem with certain characters not showing on Safari. Some websites are okay, but others, like Livejournal and babynames.com, only show about four characters per word. On some message boards, certain characters such as parentheses and capital L do not show up when I type them, but show up fine on the completed post.
What is going on? Do I need to download a new copy of Safari, switch to Firefox, or can this be fixed?
Thanks!

Apparently it's getting worse. There are eight more letters that don't appear.

Certain mailboxes not showing the stored mails

Similar Messages

Maybe you are looking for