Certain MBAM agents not reporting compliance status

I have MBAM setup in a two computer configuration topology both servers running Windows Server 2008 R2.
The problem I have is that certain clients are not reporting back their compliance status to the MBAM servers and when I check the log files for these clients the MBAM Operational logs shows "The MBAM
policies were applied successfully." This event appears regularly within the 90min windows as expected which is fine.
When I check the MBAM Admin log files had absolutely no new entries since January this year so something is definitely not right. On working clients both the Admin and Operational logs should be updated at least once every 90min that's how it was configured
in GPO.
All clients are running version 1.0.2 of the MBAM agent on Windows 7 Enterprise SP1. The problem has to be client side because there are machines reporting back regularly with no problem on the same network.

Hi,
Please take a check to see if the following KB could help here:
MBAM Enterprise Reporting Not Getting Updated
Besides, questions related MBAM, please consider ask in the following forum:
http://social.technet.microsoft.com/Forums/en-US/home?forum=mdopmbam
Experts there might share some insights for the issue here.
Best regards
Michael Shao
TechNet Community Support

Similar Messages

Windows Server 2012 WU agent not reporting to SCCM 2012

Hi folks,
Having a bit of trouble tracking down this issue with a particular WS2012 SCCM client. Unlike my other WS2012 servers that are SCCM clients in the same device collection (confirmed that this device is in the list), this one has a completely blank updates
compliance report which indicates that it's not reporting back at all.
In SCCM the policy request and heartbeat DDR are current, with last status message 5 days ago. Client activity is 'Active'.
WindowsUpdate.log has only this message when wuauclt /detectnow is run:
'Can not perform non-interactive scan if AU is interactive-only'
Couldn't find much on the interwebs about that message. I've tried re-installing the SCCM agent from scratch a few times. Ideas? Thanks in advance for any suggestions you might have.

Hi Jason,
Yes I have reviewed the logs in their entirety, I was editing to provide highlights.
Here is a broader snippet of WUAHandler.log, this is pretty much repeated:
Its a WSUS Update Source type ({4B3E3824-D6C3-463B-8FDC-4C24DAD400CF}), adding it. WUAHandler 26/11/2014 10:17:05 AM 4752 (0x1290)
Existing WUA Managed server was already set (http://<server>:8530), skipping Group Policy registration. WUAHandler 26/11/2014 10:17:05 AM 4752 (0x1290)
Added Update Source ({4B3E3824-D6C3-463B-8FDC-4C24DAD400CF}) of content type: 2 WUAHandler 26/11/2014 10:17:05 AM 4752 (0x1290)
Scan results will include superseded updates only when they are superseded by service packs and definition updates. WUAHandler 26/11/2014 10:17:05 AM 4752 (0x1290)
Search Criteria is (DeploymentAction=* AND Type='Software') OR (DeploymentAction=* AND Type='Driver') WUAHandler 26/11/2014 10:17:05 AM 4752 (0x1290)
Async searching of updates using WUAgent started. WUAHandler 26/11/2014 10:17:05 AM 4752 (0x1290)
Here is a sample WindowsUpdate.log session, interestingly the last three lines are a new error as of today.
2014-11-26 10:14:49:564 848 17c AU #############
2014-11-26 10:14:49:564 848 17c AU Triggering Online detection (interactive)
2014-11-26 10:14:52:575 848 11b8 AU #############
2014-11-26 10:14:52:575 848 11b8 AU ## START ## AU: Search for updates
2014-11-26 10:14:52:575 848 11b8 AU #########
2014-11-26 10:14:52:638 848 11b8 Report *********** Report: Initializing static reporting data ***********
2014-11-26 10:14:52:638 848 11b8 Report * OS Version = 6.2.9200.0.0.196880
2014-11-26 10:14:52:638 848 11b8 Report * OS Product Type = 0x00000007
2014-11-26 10:14:52:638 848 11b8 Report * Computer Brand = VMware, Inc.
2014-11-26 10:14:52:638 848 11b8 Report * Computer Model = VMware Virtual Platform
2014-11-26 10:14:52:638 848 11b8 Report * Platform Role = 1
2014-11-26 10:14:52:638 848 11b8 Report * AlwaysOn/AlwaysConnected (AOAC) = 0
2014-11-26 10:14:52:638 848 11b8 Report * Bios Revision = 6.00
2014-11-26 10:14:52:638 848 11b8 Report * Bios Name = PhoenixBIOS 4.0 Release 6.0
2014-11-26 10:14:52:638 848 11b8 Report * Bios Release Date = 2013-07-30T00:00:00
2014-11-26 10:14:52:638 848 11b8 Report * Bios Sku Number unavailable.
2014-11-26 10:14:52:638 848 11b8 Report * Bios Vendor = Phoenix Technologies LTD
2014-11-26 10:14:52:638 848 11b8 Report * Bios Family unavailable.
2014-11-26 10:14:52:638 848 11b8 Report * Bios Major Release = 4
2014-11-26 10:14:52:638 848 11b8 Report * Bios Minor Release = 6
2014-11-26 10:14:52:638 848 11b8 Report * Locale ID = 3081
2014-11-26 10:14:52:653 848 11b8 AU <<## SUBMITTED ## AU: Search for updates [CallId = {A97CA8F0-B911-42D1-B1BC-FAAA0F1F053A} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-11-26 10:14:52:653 848 1250 Agent *************
2014-11-26 10:14:52:653 848 1250 Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2014-11-26 10:14:52:653 848 1250 Agent *********
2014-11-26 10:14:52:653 848 1250 Agent * Online = Yes; Ignore download priority = No
2014-11-26 10:14:52:653 848 1250 Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0 and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-11-26 10:14:52:653 848 1250 Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-11-26 10:14:52:653 848 1250 Agent * Search Scope = {Machine & All Users}
2014-11-26 10:14:52:653 848 1250 Agent * Caller SID for Applicability: S-1-5-18
2014-11-26 10:14:52:653 848 1250 EP Got WSUS Client/Server URL: "http://SCCM1.<domain>:8530/ClientWebService/client.asmx"
2014-11-26 10:14:52:669 848 1250 Setup Checking for agent SelfUpdate
2014-11-26 10:14:52:669 848 1250 Setup Client version: Core: 7.8.9200.16731 Aux: 7.8.9200.16731
2014-11-26 10:14:52:669 848 1250 EP Got WSUS SelfUpdate URL: "http://SCCM1.<domain>:8530/selfupdate"
2014-11-26 10:14:52:684 848 1250 Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2014-11-26 10:14:52:700 848 1250 Misc Microsoft signed: Yes
2014-11-26 10:14:52:700 848 1250 Misc Infrastructure signed: Yes
2014-11-26 10:14:52:700 848 1250 Setup Skipping SelfUpdate check based on the /SKIP directive in wuident
2014-11-26 10:14:52:700 848 1250 Setup SelfUpdate check completed. SelfUpdate is NOT required.
2014-11-26 10:14:52:731 848 1250 PT +++++++++++ PT: Synchronizing server updates +++++++++++
2014-11-26 10:14:52:731 848 1250 PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://SCCM1.<domain>:8530/ClientWebService/client.asmx
2014-11-26 10:14:52:762 848 1250 PT WARNING: Cached cookie has expired or new PID is available
2014-11-26 10:14:52:762 848 1250 EP Got WSUS SimpleTargeting URL: "http://SCCM1.<domain>:8530"
2014-11-26 10:14:52:762 848 1250 PT Initializing simple targeting cookie, clientId = 2ee7d06e-e813-40e2-87cb-bf8156b1327a, target group = , DNS name = xdm2.<domain>
2014-11-26 10:14:52:762 848 1250 PT Server URL = http://SCCM1.<domain>:8530/SimpleAuthWebService/SimpleAuth.asmx
2014-11-26 10:14:52:887 848 1250 Agent Reading cached app categories using lifetime 604800 seconds
2014-11-26 10:14:52:887 848 1250 Agent Read 0 cached app categories
2014-11-26 10:14:58:534 848 358 AU Triggering AU detection through DetectNow API
2014-11-26 10:14:58:534 848 358 AU Piggybacking on an AU detection already in progress
2014-11-26 10:17:05:021 4568 1290 COMAPI -------------
2014-11-26 10:17:05:021 4568 1290 COMAPI -- START -- COMAPI: Init Search [ClientId = CcmExec]
2014-11-26 10:17:05:021 4568 1290 COMAPI ---------
2014-11-26 10:17:05:021 4568 1290 COMAPI -------------
2014-11-26 10:17:05:021 4568 1290 COMAPI -- START -- COMAPI: Search [ClientId = CcmExec]
2014-11-26 10:17:05:021 4568 1290 COMAPI ---------
2014-11-26 10:17:05:021 4568 1290 COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = CcmExec]
2014-11-26 17:14:00:628 848 11b8 Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2014-11-27 17:01:25:281 848 11b8 Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2014-11-27 17:01:26:594 848 11b8 Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
Let me know if the entire log files would be useful to post, any suggestions appreciated.
Thanks,
Ben

MBAM clients not report device users

Hi all,
I have installed MBAM 2.5 infrastructure with some mbam clients on laptops.
My problem is that mbam clients (ver. 2.5.0244.0) don’t report the information about device users to MBAM Recovery and Hardware DB, but one client (ver. 2.1.0117.0) does it.
Any ideas on how to fix?
Regards,
Alex

can you confirm if the group policies are flowing down to the affected machines? (regedit
HKLM\SOFTWARE\Policies\Microsoft\FVE )
older version of MBAM clients will report to the newer version of the MBAM IIS server.
Also see if URLs when posted on IE does asks for a prompt.
Mayank Sharma Support Engineer at Microsoft working in Enterprise Platform Support.

Windows 7 clients not Reporting Status to WSUS (downstream server) server running Windows 2012 R2

We have recently upgraded our WSUS server to Windows 2012 R2. Now none of the PCs reporting their status to the WSUS server and not getting updates at all. The PCs are contacting the Server but not reporting their status. Stopped the Firewall on Client and
Server. BITS and windows updates services are running.
Record the system time of the Windows 7 client.
Reboot the Windows 7 client.
Run this command from a command prompt: wuauclt /resetauthorization /detectnow.
Wait =30= minutes.
Performed the above steps. Please see the updates logs from a client.
2015-03-16 12:48:44:617
1040 15a4
Shutdwn user declined update at shutdown
2015-03-16 12:48:44:617
1040 15a4
AU Successfully wrote event for AU health state:0
2015-03-16 12:48:44:618
1040 15a4
AU AU initiates service shutdown
2015-03-16 12:48:44:649
1040 15a4
AU ########### AU: Uninitializing Automatic Updates ###########
2015-03-16 12:48:46:506
1040 15a4
Report CWERReporter finishing event handling. (00000000)
2015-03-16 12:48:46:584
1040 15a4
Service *********
2015-03-16 12:48:46:584
1040 15a4
Service ** END ** Service: Service exit [Exit code = 0x240001]
2015-03-16 12:48:46:584
1040 15a4
Service *************
2015-03-16 12:54:23:139
1024 1060
Misc =========== Logging initialized (build: 7.6.7600.320, tz: -0400) ===========
2015-03-16 12:54:23:214
1024 1060
Misc = Process: C:\Windows\system32\svchost.exe
2015-03-16 12:54:23:264
1024 1060
Misc = Module: c:\windows\system32\wuaueng.dll
2015-03-16 12:54:23:139
1024 1060
Service *************
2015-03-16 12:54:23:264
1024 1060
Service ** START ** Service: Service startup
2015-03-16 12:54:23:265
1024 1060
Service *********
2015-03-16 12:54:24:262
1024 1060
Agent * WU client version 7.6.7600.320
2015-03-16 12:54:24:263
1024 1060
Agent * Base directory: C:\Windows\SoftwareDistribution
2015-03-16 12:54:24:272
1024 1060
Agent * Access type: No proxy
2015-03-16 12:54:24:532
1024 1060
Agent * Network state: Connected
2015-03-16 12:55:17:235
1024 1060
Report CWERReporter::Init succeeded
2015-03-16 12:55:17:235
1024 1060
Agent *********** Agent: Initializing Windows Update Agent ***********
2015-03-16 12:55:17:235
1024 1060
Agent * Prerequisite roots succeeded.
2015-03-16 12:55:17:235
1024 1060
Agent *********** Agent: Initializing global settings cache ***********
2015-03-16 12:55:17:235
1024 1060
Agent * WSUS server: http://ewd-srv-01.resultstel.net:8530
2015-03-16 12:55:17:235
1024 1060
Agent * WSUS status server: http://ewd-srv-01.resultstel.net:8530
2015-03-16 12:55:17:235
1024 1060
Agent * Target group: Eastwood
2015-03-16 12:55:17:235
1024 1060
Agent * Windows Update access disabled: No
2015-03-16 12:55:17:247
1024 1060
DnldMgr Download manager restoring 0 downloads
2015-03-16 12:55:17:248
1024 1060
AU ########### AU: Initializing Automatic Updates ###########
2015-03-16 12:55:17:249
1024 1060
AU # WSUS server: http://ewd-srv-01.resultstel.net:8530
2015-03-16 12:55:17:249
1024 1060
AU # Detection frequency: 22
2015-03-16 12:55:17:249
1024 1060
AU # Target group: Eastwood
2015-03-16 12:55:17:249
1024 1060
AU # Approval type: Scheduled (Policy)
2015-03-16 12:55:17:249
1024 1060
AU # Scheduled install day/time: Every day at 3:00
2015-03-16 12:55:17:249
1024 1060
AU # Auto-install minor updates: Yes (Policy)
2015-03-16 12:55:17:249
1024 1060
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-03-16 12:55:17:249
1024 1060
AU # Will display featured software notifications (User preference)
2015-03-16 12:55:17:259
1024 1060
Agent Switching to hardware-verified ClientId.
2015-03-16 12:55:17:260
1024 1060
AU Setting AU scheduled install time to 2015-03-17 07:00:00
2015-03-16 12:55:17:402
1024 1060
Report *********** Report: Initializing static reporting data ***********
2015-03-16 12:55:17:402
1024 1060
Report * OS Version = 6.1.7601.1.0.65792
2015-03-16 12:55:17:402
1024 1060
Report * OS Product Type = 0x00000030
2015-03-16 12:55:17:600
1024 1060
Report WARNING: Failed to load reporting information from WMI with hr = 80041002.
2015-03-16 12:55:17:601
1024 1060
Report * Locale ID = 1033
2015-03-16 12:55:17:654
1024 1060
AU Successfully wrote event for AU health state:0
2015-03-16 12:55:17:655
1024 1060
AU Initializing featured updates
2015-03-16 12:55:17:655
1024 1060
AU Found 0 cached featured updates
2015-03-16 12:55:17:655
1024 1060
AU Successfully wrote event for AU health state:0
2015-03-16 12:55:17:656
1024 1060
AU Successfully wrote event for AU health state:0
2015-03-16 12:55:17:656
1024 1060
AU AU finished delayed initialization
2015-03-16 12:55:23:261
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 12:55:41:121
1024 1074
AU Triggering AU detection through DetectNow API
2015-03-16 12:55:41:122
1024 1074
AU Triggering Online detection (non-interactive)
2015-03-16 12:55:41:193
1024 1060
AU #############
2015-03-16 12:55:41:193
1024 1060
AU ## START ## AU: Search for updates
2015-03-16 12:55:41:193
1024 1060
AU #########
2015-03-16 12:55:41:218
1024 1060
AU <<## SUBMITTED ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
2015-03-16 12:55:41:218
1024 1194
Agent *************
2015-03-16 12:55:41:218
1024 1194
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-03-16 12:55:41:218
1024 1194
Agent *********
2015-03-16 12:55:41:218
1024 1194
Agent * Online = Yes; Ignore download priority = No
2015-03-16 12:55:41:218
1024 1194
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2015-03-16 12:55:41:218
1024 1194
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2015-03-16 12:55:41:218
1024 1194
Agent * Search Scope = {Machine}
2015-03-16 12:55:41:218
1024 1194
Setup Checking for agent SelfUpdate
2015-03-16 12:55:41:219
1024 1194
Setup Client version: Core: 7.6.7600.320 Aux: 7.6.7600.320
2015-03-16 12:55:45:440
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab with dwProvFlags 0x00000080:
2015-03-16 12:55:45:893
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:45:897
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\TMPD98D.tmp with dwProvFlags 0x00000080:
2015-03-16 12:55:45:979
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:46:014
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
2015-03-16 12:55:46:019
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:46:050
1024 1194
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab with dwProvFlags 0x00000080:
2015-03-16 12:55:46:055
1024 1194
Misc Microsoft signed: NA
2015-03-16 12:55:46:093
1024 1194
Setup Determining whether a new setup handler needs to be downloaded
2015-03-16 12:55:46:093
1024 1194
Setup SelfUpdate handler is not found. It will be downloaded
2015-03-16 12:55:46:093
1024 1194
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.320"
2015-03-16 12:55:52:237
1024 1194
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
2015-03-16 12:55:52:237
1024 1194
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320"
2015-03-16 12:55:53:377
1024 1194
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
2015-03-16 12:55:53:502
1024 1194
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320"
2015-03-16 12:55:56:705
1024 1194
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~x86~~7.6.7600.320" is already installed.
2015-03-16 12:55:56:896
1024 1194
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2015-03-16 12:56:01:618
1024 1060
AU AU received policy change subscription event
2015-03-16 13:00:00:824
1024 1194
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2015-03-16 13:00:00:824
1024 1194
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://ewd-srv-01.resultstel.net:8530/ClientWebService/client.asmx
2015-03-16 13:00:01:001
1024 1194
PT WARNING: PTError: 0x80041002
2015-03-16 13:00:01:001
1024 1194
PT Initializing simple targeting cookie, clientId = f86ac648-7394-46eb-8f40-eb605f77d86b, target group = Eastwood, DNS name = ewd-wc-420-235.resultstel.net
2015-03-16 13:00:01:001
1024 1194
PT Server URL = http://ewd-srv-01.resultstel.net:8530/SimpleAuthWebService/SimpleAuth.asmx
2015-03-16 13:00:01:833
1024 1194
Agent WARNING: Failed to evaluate Installed rule, updateId = {F92A18E7-8784-4828-89C9-F80085A422A7}.202, hr = 80041002
2015-03-16 13:00:02:004
1024 1194
Agent WARNING: Failed to evaluate Installed rule, updateId = {C735DBB1-06B4-49F2-815F-97976B4B86A4}.102, hr = 80041002
2015-03-16 13:00:08:676
1024 1194
Agent WARNING: Failed to evaluate Installed rule, updateId = {6A8FE277-1048-48B1-803B-4580C15BBDF1}.100, hr = 80041002
2015-03-16 13:07:37:795
1024 1194
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2015-03-16 13:07:37:795
1024 1194
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://ewd-srv-01.resultstel.net:8530/ClientWebService/client.asmx
2015-03-16 13:07:37:988
1024 1194
PT WARNING: PTError: 0x80041002
2015-03-16 13:07:41:893
1024 1194
PT WARNING: GetExtendedUpdateInfo failure, error = 0x8024400E, soap client error = 7, soap error code = 400, HTTP status code = 200
2015-03-16 13:07:41:893
1024 1194
PT WARNING: SOAP Fault: 0x000190
2015-03-16 13:07:41:893
1024 1194
PT WARNING: faultstring:Fault occurred
2015-03-16 13:07:41:893
1024 1194
PT WARNING: ErrorCode:InternalServerError(5)
2015-03-16 13:07:41:893
1024 1194
PT WARNING: Message:(null)
2015-03-16 13:07:41:893
1024 1194
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetExtendedUpdateInfo"
2015-03-16 13:07:41:893
1024 1194
PT WARNING: ID:4cd69d60-d69b-4591-88ad-5687cdda3265
2015-03-16 13:07:41:893
1024 1194
PT WARNING: PTError: 0x8024400e
2015-03-16 13:07:41:893
1024 1194
PT WARNING: GetExtendedUpdateInfo_WithRecovery: 0x8024400e
2015-03-16 13:07:41:893
1024 1194
PT WARNING: Sync of Extended Info: 0x8024400e
2015-03-16 13:07:41:893
1024 1194
PT WARNING: SyncServerUpdatesInternal failed : 0x8024400e
2015-03-16 13:07:41:914
1024 1194
Agent * WARNING: Exit code = 0x8024400E
2015-03-16 13:07:41:914
1024 1194
Agent *********
2015-03-16 13:07:41:914
1024 1194
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2015-03-16 13:07:41:914
1024 1194
Agent *************
2015-03-16 13:07:41:914
1024 1194
Agent WARNING: WU client failed Searching for update with error 0x8024400e
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:929
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:930
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:41:930
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:07:42:021
1024 14f4
AU >>## RESUMED ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
2015-03-16 13:07:42:021
1024 14f4
AU # WARNING: Search callback failed, result = 0x8024400E
2015-03-16 13:07:42:021
1024 14f4
AU # WARNING: Failed to find updates with error code 8024400E
2015-03-16 13:07:42:021
1024 14f4
AU #########
2015-03-16 13:07:42:021
1024 14f4
AU ## END ## AU: Search for updates [CallId = {6382DEFC-F99E-4A2A-B104-48CF9BE2D760}]
2015-03-16 13:07:42:021
1024 14f4
AU #############
2015-03-16 13:07:42:021
1024 14f4
AU Successfully wrote event for AU health state:0
2015-03-16 13:07:42:021
1024 14f4
AU AU setting next detection timeout to 2015-03-16 22:07:42
2015-03-16 13:07:42:022
1024 14f4
AU Setting AU scheduled install time to 2015-03-17 07:00:00
2015-03-16 13:07:42:022
1024 14f4
AU Successfully wrote event for AU health state:0
2015-03-16 13:07:42:022
1024 14f4
AU Successfully wrote event for AU health state:0
2015-03-16 13:07:46:919
1024 1194
Report REPORT EVENT: {CB48FD20-D762-4E5E-8CCA-5C27F3CFA04A}
2015-03-16 13:07:41:913-0400 1
148 101
{00000000-0000-0000-0000-000000000000}
0 8024400e
AutomaticUpdates Failure
Software Synchronization Windows Update Client failed to detect with error 0x8024400e.
2015-03-16 13:07:47:022
1024 1194
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2015-03-16 13:07:47:022
1024 1194
Report WER Report sent: 7.6.7600.320 0x8024400e 00000000-0000-0000-0000-000000000000 Scan 101 Managed
2015-03-16 13:07:47:022
1024 1194
Report CWERReporter finishing event handling. (00000000)
2015-03-16 13:14:23:923
1024 1194
PT WARNING: PTError: 0x80041002
2015-03-16 13:14:23:923
1024 1194
Report Uploading 1 events using cached cookie, reporting URL = http://ewd-srv-01.resultstel.net:8530/ReportingWebService/ReportingWebService.asmx

Don thank you for the reply.
But I do have the same issue on the other PCs as well on which WMI is good. And also i pointed the above PC to my primary WSUS server which is running windows 2003 and it reported successfully and downloaded the approved updates.
please see the below logs from the same PC after pointing to our wsus running on win2003.
2015-03-17 14:41:08:507
1020 f1c
Inv   # Talking to WSUS server = http://atl-wsus-1:8530
2015-03-17 14:41:08:508
1020 f1c
Inv   # Downloading Rule file from = http://atl-wsus-1:8530/Inventory/InventoryRules.cab
2015-03-17 14:41:08:508
1020 53c
AU #########
2015-03-17 14:41:08:508
1020 53c
AU ## END ## AU: Search for updates [CallId = {54490DE2-CF7B-4017-A553-6C8C1532E621}]
2015-03-17 14:41:08:508
1020 53c
AU #############
2015-03-17 14:41:08:510
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:510
1020 53c
AU Featured notifications is disabled.
2015-03-17 14:41:08:510
1020 53c
AU AU setting next detection timeout to 2015-03-18 16:13:54
2015-03-17 14:41:08:510
1020 53c
AU Setting AU scheduled install time to 2015-03-18 07:00:00
2015-03-17 14:41:08:510
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {6C2547EE-DC7B-4080-8884-A040572C5EC4}.204, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approving update for download, updateId = {673027F3-841E-4215-88BE-A0BFB456B2B1}.207, ForUx=0, IsOwnerUx=0, HasDeadline=0, IsMinor=0
2015-03-17 14:41:08:510
1020 53c
AU Auto-approved 5 update(s) for download (NOT for Ux)
2015-03-17 14:41:08:510
1020 53c
AU #############
2015-03-17 14:41:08:511
1020 53c
AU ## START ## AU: Download updates
2015-03-17 14:41:08:511
1020 53c
AU #########
2015-03-17 14:41:08:511
1020 53c
AU   # Approved updates = 5
2015-03-17 14:41:08:512
1020 53c
AU AU initiated download, updateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202, callId = {F3389077-03F0-4625-83EF-CAAEBA8ED147}
2015-03-17 14:41:08:513
1020 53c
AU AU initiated download, updateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203, callId = {B94BF4E5-5709-4D22-924A-5C5B8D4712C9}
2015-03-17 14:41:08:514
1020 53c
AU AU initiated download, updateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203, callId = {D330B2E0-CA38-4ED9-894A-36717C01F09A}
2015-03-17 14:41:08:515
1020 53c
AU AU initiated download, updateId = {6C2547EE-DC7B-4080-8884-A040572C5EC4}.204, callId = {B6B35AC2-9BC1-4CFA-8421-D666C79464AD}
2015-03-17 14:41:08:516
1020 53c
AU AU initiated download, updateId = {673027F3-841E-4215-88BE-A0BFB456B2B1}.207, callId = {F0D00A6F-36BC-4680-9BE4-4005742A2C93}
2015-03-17 14:41:08:516
1020 53c
AU Setting AU scheduled install time to 2015-03-18 07:00:00
2015-03-17 14:41:08:516
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:516
1020 53c
AU AU setting pending client directive to 'Download Progress'
2015-03-17 14:41:08:518
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:518
1020 53c
AU   # Pending download calls = 5
2015-03-17 14:41:08:518
1020 53c
AU <<## SUBMITTED ## AU: Download updates
2015-03-17 14:41:08:520
1020 53c
AU Successfully wrote event for AU health state:0
2015-03-17 14:41:08:964
1020 f1c
Misc Validating signature for C:\Windows\SoftwareDistribution\Inventory\InventoryRule\InventoryRules.cab with dwProvFlags 0x00000080:
2015-03-17 14:41:08:976
1020 f1c
Misc Microsoft signed: NA
2015-03-17 14:41:08:993
1020 f1c
Inv   # Inventory Rule id = 8226C3A1-70D4-4848-B441-1555AC820A23, version = 1.0
2015-03-17 14:41:09:022
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:086
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:118
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:150
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:182
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:214
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:246
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:278
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:310
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:342
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:374
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:406
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:438
1020 f1c
Inv WARNING: Inventory: Failed to connect to the root\cimv2 namespace 0x80041002
2015-03-17 14:41:09:471
1020 f1c
PT WARNING: PTError: 0x80041002
2015-03-17 14:41:10:590
1020 f1c
Inv #########
2015-03-17 14:41:10:590
1020 f1c
Inv ## END ## Inv: Inventory Collection
2015-03-17 14:41:10:590
1020 f1c
Inv #############
2015-03-17 14:41:10:592
1020 f1c
DnldMgr *************
2015-03-17 14:41:10:592
1020 f1c
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:10:592
1020 f1c
DnldMgr *********
2015-03-17 14:41:10:592
1020 f1c
DnldMgr   * Call ID = {F3389077-03F0-4625-83EF-CAAEBA8ED147}
2015-03-17 14:41:10:592
1020 f1c
DnldMgr   * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2015-03-17 14:41:10:592
1020 f1c
DnldMgr   * Updates to download = 1
2015-03-17 14:41:10:592
1020 f1c
Agent   * Title = Security Update for Windows 7 (KB3029944)
2015-03-17 14:41:10:592
1020 f1c
Agent   * UpdateId = {58406504-5709-46CA-BB54-3FE9628545AA}.202
2015-03-17 14:41:10:592
1020 f1c
Agent   * Bundles 1 updates:
2015-03-17 14:41:10:592
1020 f1c
Agent   * {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202
2015-03-17 14:41:10:598
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202] ***********
2015-03-17 14:41:10:599
1020 f1c
DnldMgr   * Queueing update for download handler request generation.
2015-03-17 14:41:10:599
1020 f1c
DnldMgr Generating download request for update {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202
2015-03-17 14:41:13:863
1020 f1c
Handler Generating request for CBS update CF9A0A9F-EA32-4B84-8B11-647F8DE3432C in sandbox C:\Windows\SoftwareDistribution\Download\4fa5441bcc144c4a7917304858841f6b
2015-03-17 14:41:13:863
1020 f1c
Handler Selected payload type is ptExpress
2015-03-17 14:41:13:863
1020 f1c
Handler Detected download state is dsStart
2015-03-17 14:41:13:863
1020 f1c
Handler Adding windows6.1-kb3029944-x86-express.cab (entire file) to request list.
2015-03-17 14:41:13:864
1020 f1c
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2015-03-17 14:41:13:864
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {CF9A0A9F-EA32-4B84-8B11-647F8DE3432C}.202] ***********
2015-03-17 14:41:16:436
1020 f1c
DnldMgr   * BITS job initialized, JobId = {675985CD-3133-4157-9D02-06CC33C29C49}
2015-03-17 14:41:16:473
1020 f1c
DnldMgr   * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2015/01/windows6.1-kb3029944-x86-express_0c21886fd0931285b2d3a29773d3673c947f60b3.cab to C:\Windows\SoftwareDistribution\Download\4fa5441bcc144c4a7917304858841f6b\windows6.1-kb3029944-x86-express.cab
(full file).
2015-03-17 14:41:16:644
1020 f1c
Agent *********
2015-03-17 14:41:16:644
1020 f1c
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:644
1020 f1c
Agent *************
2015-03-17 14:41:16:645
1020 f1c
DnldMgr *************
2015-03-17 14:41:16:645
1020 f1c
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:645
1020 f1c
DnldMgr *********
2015-03-17 14:41:16:645
1020 f1c
DnldMgr   * Call ID = {B94BF4E5-5709-4D22-924A-5C5B8D4712C9}
2015-03-17 14:41:16:645
1020 f1c
DnldMgr   * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2015-03-17 14:41:16:645
1020 f1c
DnldMgr   * Updates to download = 1
2015-03-17 14:41:16:645
1020 f1c
Agent   * Title = Security Update for Windows 7 (KB3004361)
2015-03-17 14:41:16:645
1020 f1c
Agent   * UpdateId = {B9D0F709-E6A7-4383-AFB3-E35FB9CB0AAA}.203
2015-03-17 14:41:16:645
1020 f1c
Agent   * Bundles 1 updates:
2015-03-17 14:41:16:645
1020 f1c
Agent   * {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203
2015-03-17 14:41:16:648
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203] ***********
2015-03-17 14:41:16:649
1020 f1c
DnldMgr   * Queueing update for download handler request generation.
2015-03-17 14:41:16:649
1020 f1c
DnldMgr Generating download request for update {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203
2015-03-17 14:41:16:678
1020 f1c
Handler Generating request for CBS update 151B27A0-4EA8-428F-BE06-C90A3CF0C2CA in sandbox C:\Windows\SoftwareDistribution\Download\963019da42f4a0388fdc4337be401b25
2015-03-17 14:41:16:678
1020 f1c
Handler Selected payload type is ptExpress
2015-03-17 14:41:16:678
1020 f1c
Handler Detected download state is dsStart
2015-03-17 14:41:16:678
1020 f1c
Handler Adding windows6.1-kb3004361-x86-express.cab (entire file) to request list.
2015-03-17 14:41:16:687
1020 f1c
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2015-03-17 14:41:16:687
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {151B27A0-4EA8-428F-BE06-C90A3CF0C2CA}.203] ***********
2015-03-17 14:41:16:732
1020 f1c
DnldMgr   * BITS job initialized, JobId = {27F85F04-0E56-4BFA-93E3-4D6BCB3ECB4F}
2015-03-17 14:41:16:758
1020 f1c
DnldMgr   * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2014/12/windows6.1-kb3004361-x86-express_47f37958063afd2521ca42de8904b55d1aa85b89.cab to C:\Windows\SoftwareDistribution\Download\963019da42f4a0388fdc4337be401b25\windows6.1-kb3004361-x86-express.cab
(full file).
2015-03-17 14:41:16:809
1020 f1c
Agent *********
2015-03-17 14:41:16:809
1020 f1c
Agent ** END ** Agent: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:809
1020 f1c
Agent *************
2015-03-17 14:41:16:811
1020 f1c
DnldMgr *************
2015-03-17 14:41:16:811
1020 f1c
DnldMgr ** START ** DnldMgr: Downloading updates [CallerId = AutomaticUpdates]
2015-03-17 14:41:16:811
1020 f1c
DnldMgr *********
2015-03-17 14:41:16:811
1020 f1c
DnldMgr   * Call ID = {D330B2E0-CA38-4ED9-894A-36717C01F09A}
2015-03-17 14:41:16:811
1020 f1c
DnldMgr   * Priority = 2, Interactive = 0, Owner is system = 1, Explicit proxy = 0, Proxy session id = -1, ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}
2015-03-17 14:41:16:811
1020 f1c
DnldMgr   * Updates to download = 1
2015-03-17 14:41:16:811
1020 f1c
Agent   * Title = Security Update for Windows 7 (KB3031432)
2015-03-17 14:41:16:811
1020 f1c
Agent   * UpdateId = {2CA8E6E8-FC4A-4974-A208-18CDF1D01D86}.203
2015-03-17 14:41:16:811
1020 f1c
Agent   * Bundles 1 updates:
2015-03-17 14:41:16:811
1020 f1c
Agent   * {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203
2015-03-17 14:41:16:814
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203] ***********
2015-03-17 14:41:16:815
1020 f1c
DnldMgr   * Queueing update for download handler request generation.
2015-03-17 14:41:16:815
1020 f1c
DnldMgr Generating download request for update {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203
2015-03-17 14:41:16:843
1020 f1c
Handler Generating request for CBS update EE556F37-7EAC-42B3-BD29-653F98E6E364 in sandbox C:\Windows\SoftwareDistribution\Download\7db602a9c625e53b175ecb83170441ba
2015-03-17 14:41:16:843
1020 f1c
Handler Selected payload type is ptExpress
2015-03-17 14:41:16:843
1020 f1c
Handler Detected download state is dsStart
2015-03-17 14:41:16:843
1020 f1c
Handler Adding windows6.1-kb3031432-x86-express.cab (entire file) to request list.
2015-03-17 14:41:16:844
1020 f1c
Handler Request generation for CBS update complete with hr=0x0 and pfResetSandbox=0
2015-03-17 14:41:16:845
1020 f1c
DnldMgr *********** DnldMgr: New download job [UpdateId = {EE556F37-7EAC-42B3-BD29-653F98E6E364}.203] ***********
2015-03-17 14:41:16:881
1020 f1c
DnldMgr   * BITS job initialized, JobId = {6C5B3B60-DB8B-4B6F-9E40-D99CA43B366D}
2015-03-17 14:41:16:906
1020 f1c
DnldMgr   * Downloading from http://wsus.ds.download.windowsupdate.com/c/msdownload/update/software/secu/2015/01/windows6.1-kb3031432-x86-express_fb5326e90facfe6de39cf44fc4ed5ec630968ba5.cab to C:\Windows\SoftwareDistribution\Download\7db602a9c625e53b175ecb83170441ba\windows6.1-kb3031432-x86-express.cab
(full file).

"this computer has not reported status yet"

I am trying to configure the SC 2012 R2 ConfigMgr to deploy Endpoint to our client computers and replace the old WSUS server.
I have created a boundary based on IP range (so that it does not mess with the other computers until we retire the old WSUS) and two boundary groups (one for content location and one for site assignment).
The ConfigMgr (device collections) "knows" the OU for the test computers. When I go to assets & compliance \ overview \ devices, I can see the computers from the OU : site code is correct, client is "no" and client type is "none".
The Update Services console "sees" the computer (correct name, correct IP) but the status remains at "not yet reported".
I had to mannually install the client agent from \\sccmserver\sms_site\client. According to Update Services, the server version is 6.3.9600.16384. According to WindowsUpdate.log on the client computer, Client version is Core : 7.9.9600.16422 & Aux :
7.9.9600.16384.
Any suggestion for my next move ?
THX

Hi,
---> Warning: no remote client installation account found
Have you added the Client Push Installation accounts?
Some more troubleshooting links:
http://deployos.com/blog/2012/10/01/using-and-troubleshooting-client-push-in-sccm
http://eskonr.com/2010/11/sccm-client-installation-troubleshooting-steps-check-list/
http://blogs.technet.com/b/configurationmgr/archive/2009/08/10/troubleshooting-issues-where-clients-are-not-reporting.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

MBAM - SCCM 2012 Reports - Error: the 'MBAM Policy' view does not exist

Hi
I have installed MBAM with SCCM 2012 integration. A single server install with SQL server 2012. Mostly it has gone smoothly and laptops are being encrypted and pins stored and recoverable. The problem I have is reports are not showing. I get the following
error message.
"Error: the 'MBAM Policy' view does not exist"
Any ideas why this is? I get the same error message with all 4 reports.

Hi Slycy,
There is another thread that seems to be a similar issue
here that may help you. The last post in particular has a number of steps that you can use to speed up creation of the views:
Just for future reference, there are quite a few things that have to happen before the view is created. This is merely how CM works.
Make MBAM MOF changes
Select TPM spec version in hardware inventory
Install MBAM CM Integration feature
Perform a machine policy refresh cycle on a client to get the MOF changes that need to be inventoried
Perform hardware inventory
Update MBAM Supported Computers collection membership. The machine should appear if it meets the criteria
Run another machine policy refresh on the client so that the Configuration Baseline will come down
Make sure that the MBAM agent has woken up once
Evaluate the Configuration Baseline
The MBAM views should be created now.
You don't have to do this for every machine, but this is the process to speed it up. If you let CM do it, it could take over a week before the view is created the first time, depending on when Hardware inventory runs, etc.
Hope this helps,
David

/TDAG/CPM_REPORT007 error in Compliance Status Report

Hello SAP Guru's,
I receive the following error message when I start the Compliance Status Report (/TDAG/CPR03) on a material:
Unit of measure M with dimension LENGTH is invalid for specification 000000001157.
Message no./TDAG/CPM_REPORT007
I guess something is missing in the customizing. But do you have an idea what is missing? and where can I define it?
Thanks in advance for your help.
Rudy

Hello Rudy
I'm not familiar with the report but based on the error message I would check the following:
Go to transaction CUNI.
Select dimension LENGTH - on the lower right part of the screen
Check if the unit M (Meter) is defined for dimension LENGHT.
If not, ask the responsible person to enter it.
Hope this helps
Mark

HTTPService still not reporting status 500

I was told that the HTTPService (using POST) has been enhaced
to better report server side errors. In particular, when the server
responds with a status 500 one is not able to see the actual error
from the server.
This problem still exists and as a result makes using Flex as
an RIA platform not play by the rules. Meaning, one can't have
multiple front end applications using the same server side
application without having to do special things for Flex
applications.
Since the http socket in browsers support this capability I
don't understand why Flash player has limitations in this regard.
More importantly, is this going to be fixed?

The issue:
someone installed the SUP role for SCCM 2007 and configured it for the separate WSUS server (on Windows server 2012). They didn't select "Create all WSUS reporting events"for the SUP role, and we have abandoned SCCM's SUP role. So now all of our clients
are still updating with our WSUS server but not reporting status.
Yeah, I hate when that happens, and you're not the first victim of this particular scenario. The setting can be reset via the API, and I believe that there's a VB script or a PowerShell script (or maybe both) on CodePlex that can be used to reset the reporting
option on the WSUS server.
Actually, since this is a WSUS v6 server, you may be able to configure it directly using PowerShell now, given the assortment of API functionality that is now exposed in PowerShell.
If not natively, also check out the PoshWSUS package, which almost certainly supports this option configuration.
Arguably when converting from a SUP to a standalone WSUS server, it would be better to build the WSUS server from scratch, which also would eliminate this issue. Consider how many superseded updates were expired by Configuration Manager, that NOW...
maybe you don't want to be expired? (Or worse, have already been deleted by the Server Cleanup Wizard because they
were expired.)
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

WSUS - "this computer has not reported status yet" Windows server 2003

I just did a successful installation of wsus 3.0 Sp2
I am able to see all the machines but the issue starts there
Each of the machine show this error " this computer has not reported status yet"
i have tried but hasnt manage to resolve this issue
kindly guide me on how i can resolve it
thx

2013-06-26 14:20:36:633
644 478
AU ## END ## AU: Search for updates [CallId = {4E48EF51-0D7C-458A-A575-9BA1B4799175}]
2013-06-26 14:20:36:633
644 478
AU #############
2013-06-26 14:20:36:634
644 478
AU Successfully wrote event for AU health state:0
2013-06-26 14:20:36:634
644 478
AU AU setting next detection timeout to 2013-06-26 16:20:36
2013-06-26 14:20:36:634
644 478
AU Setting AU scheduled install time to 2013-06-27 00:00:00
2013-06-26 14:20:36:634
644 478
AU Successfully wrote event for AU health state:0
2013-06-26 14:20:36:634
644 478
AU Successfully wrote event for AU health state:0
2013-06-26 14:20:41:581
644 1338
Report REPORT EVENT: {8DFBD635-02A8-4773-9DF8-80880752189A}
2013-06-26 14:20:36:577+0300 1
148 101
{D67661EB-2423-451D-BF5D-13199E37DF28}
1 800b0001
SelfUpdate Failure
Software Synchronization Windows Update Client failed to detect with error 0x800b0001.
2013-06-26 14:20:41:621
644 1338
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2013-06-26 14:20:41:621
644 1338
Report WER Report sent: 7.6.7600.256 0x800b0001 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2013-06-26 14:20:41:621
644 1338
Report CWERReporter finishing event handling. (00000000)
2013-06-26 14:22:41:605
644 1338
Report Uploading 1 events using cached cookie, reporting URL = http://NTKE01/ReportingWebService/ReportingWebService.asmx
2013-06-26 14:22:41:612
644 1338
Report Reporter successfully uploaded 1 events.
2013-06-26 15:25:02:219
644 13d0
AU Triggering AU detection through DetectNow API
2013-06-26 15:25:02:219
644 13d0
AU Triggering Online detection (non-interactive)
2013-06-26 15:25:02:220
644 718
AU #############
2013-06-26 15:25:02:220
644 718
AU ## START ## AU: Search for updates
2013-06-26 15:25:02:220
644 718
AU #########
2013-06-26 15:25:02:221
644 718
AU <<## SUBMITTED ## AU: Search for updates [CallId = {65FA8DBB-1567-45A0-8ECB-103EFAB1C0A3}]
2013-06-26 15:25:02:221
644 179c
Agent *************
2013-06-26 15:25:02:221
644 179c
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-06-26 15:25:02:221
644 179c
Agent *********
2013-06-26 15:25:02:221
644 179c
Agent * Online = Yes; Ignore download priority = No
2013-06-26 15:25:02:222
644 179c
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2013-06-26 15:25:02:222
644 179c
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2013-06-26 15:25:02:222
644 179c
Agent * Search Scope = {Machine}
2013-06-26 15:25:02:242
644 179c
Setup Checking for agent SelfUpdate
2013-06-26 15:25:02:242
644 179c
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2013-06-26 15:25:06:522
644 179c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-06-26 15:25:06:530
644 179c
Misc Microsoft signed: Yes
2013-06-26 15:25:06:533
644 179c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-06-26 15:25:06:558
644 179c
Misc Microsoft signed: Yes
2013-06-26 15:25:08:643
644 179c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-06-26 15:25:08:647
644 179c
Misc Microsoft signed: Yes
2013-06-26 15:25:08:700
644 179c
Setup Determining whether a new setup handler needs to be downloaded
2013-06-26 15:25:08:700
644 179c
Setup SelfUpdate handler is not found. It will be downloaded
2013-06-26 15:25:08:700
644 179c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-06-26 15:25:09:376
644 179c
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-06-26 15:25:09:376
644 179c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-06-26 15:25:09:388
644 179c
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-06-26 15:25:09:388
644 179c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-06-26 15:25:09:406
644 179c
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-06-26 15:25:09:406
644 179c
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2013-06-26 15:25:09:466
644 179c
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2013-06-26 15:25:09:466
644 179c
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://NTKE01/ClientWebService/client.asmx
2013-06-26 15:25:09:536
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:25:09:536
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:25:09:536
644 179c
PT Server URL = http://NTKE01/SimpleAuthWebService/SimpleAuth.asmx
2013-06-26 15:25:17:456
644 179c
PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2013-06-26 15:25:17:456
644 179c
PT WARNING: SOAP Fault: 0x00012c
2013-06-26 15:25:17:457
644 179c
PT WARNING: faultstring:Fault occurred
2013-06-26 15:25:17:457
644 179c
PT WARNING: ErrorCode:ConfigChanged(2)
2013-06-26 15:25:17:457
644 179c
PT WARNING: Message:(null)
2013-06-26 15:25:17:457
644 179c
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
2013-06-26 15:25:17:457
644 179c
PT WARNING: ID:78fa31e8-8714-47b9-8ae3-182ecb2d9f74
2013-06-26 15:25:17:477
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:25:17:477
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:25:17:477
644 179c
PT Server URL = http://NTKE01/SimpleAuthWebService/SimpleAuth.asmx
2013-06-26 15:27:50:499
644 718
AU AU received policy change subscription event
2013-06-26 15:31:23:807
644 13d0
AU Triggering AU detection through DetectNow API
2013-06-26 15:31:23:807
644 13d0
AU Piggybacking on an AU detection already in progress
2013-06-26 15:31:27:317
644 13d0
AU Triggering AU detection through DetectNow API
2013-06-26 15:31:27:317
644 13d0
AU Piggybacking on an AU detection already in progress
2013-06-26 15:36:56:942
644 179c
PT WARNING: SyncUpdates failure, error = 0x8024400A, soap client error = 10, soap error code = 0, HTTP status code = 200
2013-06-26 15:36:56:942
644 179c
PT WARNING: PTError: 0x8024400a
2013-06-26 15:36:56:942
644 179c
PT WARNING: SyncUpdates_WithRecovery failed.: 0x8024400a
2013-06-26 15:36:56:942
644 179c
PT WARNING: Sync of Updates: 0x8024400a
2013-06-26 15:36:56:942
644 179c
PT WARNING: SyncServerUpdatesInternal failed: 0x8024400a
2013-06-26 15:36:56:942
644 179c
Agent * WARNING: Failed to synchronize, error = 0x8024400A
2013-06-26 15:36:56:943
644 179c
Agent * WARNING: Exit code = 0x8024400A
2013-06-26 15:36:56:943
644 179c
Agent *********
2013-06-26 15:36:56:943
644 179c
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-06-26 15:36:56:943
644 179c
Agent *************
2013-06-26 15:36:56:943
644 179c
Agent WARNING: WU client failed Searching for update with error 0x8024400a
2013-06-26 15:36:56:959
644 8dc
AU >>## RESUMED ## AU: Search for updates [CallId = {65FA8DBB-1567-45A0-8ECB-103EFAB1C0A3}]
2013-06-26 15:36:56:959
644 8dc
AU # WARNING: Search callback failed, result = 0x8024400A
2013-06-26 15:36:56:959
644 8dc
AU # WARNING: Failed to find updates with error code 8024400A
2013-06-26 15:36:56:959
644 8dc
AU #########
2013-06-26 15:36:56:959
644 8dc
AU ## END ## AU: Search for updates [CallId = {65FA8DBB-1567-45A0-8ECB-103EFAB1C0A3}]
2013-06-26 15:36:56:959
644 8dc
AU #############
2013-06-26 15:36:56:959
644 8dc
AU Successfully wrote event for AU health state:0
2013-06-26 15:36:56:959
644 8dc
AU AU setting next detection timeout to 2013-06-26 17:36:56
2013-06-26 15:36:56:959
644 8dc
AU Setting AU scheduled install time to 2013-06-27 00:00:00
2013-06-26 15:36:56:959
644 8dc
AU Successfully wrote event for AU health state:0
2013-06-26 15:36:56:960
644 8dc
AU Successfully wrote event for AU health state:0
2013-06-26 15:37:01:943
644 179c
Report REPORT EVENT: {48D1738E-F97A-45A4-8AB5-ECBE8FBDDF8F}
2013-06-26 15:36:56:943+0300 1
148 101
{00000000-0000-0000-0000-000000000000}
0 8024400a
AutomaticUpdates Failure
Software Synchronization Windows Update Client failed to detect with error 0x8024400a.
2013-06-26 15:37:01:950
644 179c
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2013-06-26 15:37:01:950
644 179c
Report WER Report sent: 7.6.7600.256 0x8024400a 00000000-0000-0000-0000-000000000000 Scan 101 Managed
2013-06-26 15:37:01:951
644 179c
Report CWERReporter finishing event handling. (00000000)
2013-06-26 15:39:01:979
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:39:01:979
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:39:01:979
644 179c
PT Server URL = http://NTKE01/SimpleAuthWebService/SimpleAuth.asmx
2013-06-26 15:39:02:302
644 179c
PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2013-06-26 15:39:02:302
644 179c
PT WARNING: SOAP Fault: 0x00012c
2013-06-26 15:39:02:302
644 179c
PT WARNING: faultstring:Fault occurred
2013-06-26 15:39:02:302
644 179c
PT WARNING: ErrorCode:ConfigChanged(2)
2013-06-26 15:39:02:302
644 179c
PT WARNING: Message:(null)
2013-06-26 15:39:02:302
644 179c
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
2013-06-26 15:39:02:302
644 179c
PT WARNING: ID:38d9b059-92f2-4248-9a71-be1e33841fcb
2013-06-26 15:39:02:311
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:39:02:311
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:39:02:311
644 179c
PT Server URL =
AS you can see the log file is bigggggg..
pls advise

Office Telemetry Agent Last Run Result 0x800700005 and machines not reporting back in the Telemetry Dashboard

We have had the Office Telemetry Dashboard setup for a while now as part of our Office 2013 evaluation and it currently reports back on 117 Computers which roughly matches up with the number of agents we have deployed. However, I have recently discovered
that some computers do not show up on the dashboard when searching under either their computer name or username. Having looked locally at these machines they report a Last Run Result code of 0x800700005 on the Task Scheduler. Not exactly sure what this
means as I know its a fairly generic code. I can run the telemetry dashboard locally on the effected machines and all appears ok. I have looked at the main Telemetry Processor Log file on our server (%windows%\ServiceProfiles\NetworkService\AppData\Local\Temp\dperrorlog.txt)
and can see there are quite a few machines reporting that Office Telemetry Processor deleted the folder \\ServerName\SharedFolderName\ComputerNameReference because the files in the folder haven't been uploaded for more than 2 hours. I tried googling this error
but got nothing back.
The machines in question are running Windows 7 Enterprise SP1, Office 2013 and the telemetry agent is configured through Group Policy. We also have a number of Office 2007 clients
running the agent but I have not yet checked to see if any of these ones are not reporting back.
Can anyone help troubleshoot this issue further to try and establish why some machines are not showing up in the dashboard logs. I have gone through the troubleshooting info here http://technet.microsoft.com/en-us/library/jj219431.aspx#tshooting
but so far can't find a solution.
Thanks.

I tried running the agent as admin and it returned a last run result of 0x41301 which I believe means the Task is currently running but its been like this for several days with nothing being reported back yet.
For all the other agents that appear to be running fine they show up on the dashboard with each non-admin username which is what we need to run reports based on individual users so I cant understand why this would be a permissions problem. The permissions
on the shared folder were setup using the automated option when installing the telemetry processor on the server. I have tried just adding in one of the problem users to have full control to see if this makes a difference but have not tested this yet.
Anyone have any tips on troubleshooting the DPErrorLog file? There doesn't appear to be much out there in the way of documentation for this stuff. Is anyone else using the Telemetry Dashboard successfully as part of their Office 2013 evaluation?
Thanks.

Status Agent Not Reachable - How to set a fix port number?

My EM 10g was working fine http://localhost:5500/em
Now when I tried, it was not working. I looked into portlist and found out it there was additional port of 5502
But when I logged into port 5502, Status Agent Not Reachable. Other links were working fine.
I had even installed another DB called REPOS other than the default ORCL.
All the services were up and running and I was just bouncing services back and forth and luckly I got the original port 5500 to work and then I did not got the error "Status Agent Not Reachable".
So I just wanted to know how to set a dedicated port in case the port number changes back to 5502 and if I get the error again.
Thanks in advance.

Yes I installed multipe databases for eg ORCL was the default but I installed REPOS.
I did not uninstall the db.
Why does it show two different ports for ORCL 5500 and 5502 and for Repos it shows two ports but they are the same 5501.
Everything is on my local machine.
Following is from the portlist
Ultra Search HTTP port number =5620
Enterprise Manager Agent Port =
iSQL*Plus HTTP port number =5560
Enterprise Manager Console HTTP Port (orcl) = 5500
Enterprise Manager Agent Port (orcl) = 1830
Enterprise Manager Console HTTP Port (repos) = 5501
Enterprise Manager Agent Port (repos) = 1831
Enterprise Manager Console HTTP Port (ORCL) = 5502
Enterprise Manager Agent Port (ORCL) = 1830
Enterprise Manager Console HTTP Port (repos) = 5501
Enterprise Manager Agent Port (repos) = 1831

Agent down not reported in OEM

I am on 11.1.0 OEM grid control. One of the cluster host's agent is down. But the same is not reported on the Pie chart of OEM home page.
When i click on the Host performance tab, it reports the below error.
An error has occurred!
Unable to obtain data for target hostA. The target may be down. Switching to the last 24 hrs view.But for the RAC instance running on this node, OEM does not report any error. It gives all details as if the agent is up. (even after waiting for 10 min)
In the same OEM when the agent on any other target is down, it is reported in the pie chart within 5 min.
I am not clear what is wrong with this and how to fix it.

Hi,
I am getting following error when adding database manually
oracle.sysman.emSDK.emd.comm.CommException: Received unexpected response text : <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> <HTML><HEAD><TITLE>Error Message</TITLE> <META http-equiv=Content-Type content="text/html; charset=UTF-8"> <STYLE id=L_default_1>A { FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: #005a80; FONT-FAMILY: tahoma } A:hover { FONT-WEIGHT: bold; FONT-SIZE: 10pt; COLOR: #0d3372; FONT-FAMILY: tahoma } TD { FONT-SIZE: 8pt; FONT-FAMILY: tahoma } TD.titleBorder { BORDER-RIGHT: #955319 1px solid; BORDER-TOP: #955319 1px solid; PADDING-LEFT: 8px; FONT-WEIGHT: bold; FONT-SIZE: 12pt; VERTICAL-ALIGN: middle; BORDER-LEFT: #955319 0px solid; COLOR: #955319; BORDER-BOTTOM: #955319 1px solid; FONT-FAMILY: tahoma; HEIGHT: 35px; BACKGROUND-COLOR: #d2b87a; TEXT-ALIGN: left } TD.titleBorder_x { BORDER-RIGHT: #955319 0px solid; BORDER-TOP: #955319 1px solid; PADDING-LEFT: 8px; FONT-WEIGHT: bold; FONT-SIZE: 12pt; VERTICAL-ALIGN: middle; BORDER-LEFT: #955319 1px solid; COLOR: #978c79; BORDER-BOTTOM: #955319 1px solid; FONT-FAMILY: tahoma; HEIGHT: 35px; BACK
Thanks,

Agent31 - agent not ready details - report

Dear All,
We are in the position to provide explanation to the customer about the agent31 - agent not ready details report
I herewith attached the screen shot of report, where i can see not ready duplicated two times as below
reason code as 0 and 20003, and just gone through the explanation for 20003 found as below
20003 - applicable if you are using the Cisco Agent Desktop
If the agent is not in Not Ready state, a request is made toplace the agent in Not Ready state and then a logout requestis made to log the agent out.
But customer doesn't use CAD they use web based customized cti tool.
Please update with clarification or your idea.
with Regards,
Manivannan

Hi,
actually, the report shows what the ICM historical database tables contain - they contain what was written into those tables - ICM writes there whatever it was instructed to.
So if your web based custom agent tool writes 20003 (or anything), then it will appear in the report.
G.

W2012 R2 Server not reporting update deployment status

Hello,
I have a strange issue with some of my Windows 2012 R2 Servers. I am using Automatic Deployment Rules for deploying Windows Updates to my client.
On my deployment, I have ~30 W2012R2 clients. I don't know why, but 50% of my clients are not reporting correctly to SCCM. When I go to the "Monitoring" -> "Deployments" and I analyze the report, my 50% faulty client are under the
"Unknow" tabs.
I have already check, and it's not a FW issue. I have other ADR and clients are reporting correctly.
This issue only appears with 2012 R2 client.
Have you got already see this behaviour ?
Thanks

Hello,
I have checked the log, and I didn't see anything strange.
In the C:\Windows\WindowsUpdate.log, I have see this :
The first line is "OpenReportingWebServiceConnection, reporting URL = http://MYSCCMSERVER:8530/ReportingWebService/ReportingWebService.asmx"
Why I can see in the log FQDN of microsoft ? Is this normal ?

0FI_AR_4 not updating item status

Hi !
I am facing a problem with extractor 0FI_AR_4. When loading a delta load with clearing docs the status of the document cleared by this delta is still O.
I can find the clearing doc in the ODS, but the cleared one is still the same, with blank clearing doc and clearing date.
Is this correct ? Shouldn't the cleared doc appear as cleared with its corresponding cleareing doc and clearing date ?
edit: I have just found an OSS Note 1051099 - BUC: Change to clearing information not reported to BW, but I know for certain that the clearing process is made through SAP standard transactions and not the program mentioned in the note. But the problem is the same. The chage of status that should update the record in the ODS is not beign generated, so I have only two records in PSA, one for the original document and another for the clearing doc, but there should be a third one for the update of original doc with status changed to C. Am I right ? Has this happened to anyone else out there ?
Please tell me where to start looking for answers !!
Regards,
Santiago
Edited by: Santiago Reig on Mar 11, 2008 7:32 PM

Hi..
For FI datasources you will not be able to see any data in the delta queue..
Data will get populated in the delta queue during extraction..
After init...it writes the entries into the time stamp table BWOM2_TIMEST in the SAP R/3 System with a new upper limit for the time stamp selection...
Depending on that data will get fetched from the table BKPF based on creation date (CPUDT)...
For 0FI_AR_4 (AR- line items )Selections are made from tables BSID/BSAD (Accounts Receivable)
This is for new entries.......
For changed records data will get fetched from the table BWFI_AEDAT , depending on the time stamp table BWOM2_TIMEST....
Check the following blog :
/people/swapna.gollakota/blog/2008/01/14/one-stage-stop-to-know-all-about-bw-extractors-part1
Regards,
Debjani.........

Certain MBAM agents not reporting compliance status

Similar Messages

Maybe you are looking for