Certificate Authority is not being seen by windows server 2003 machines
Good Afternoon,
We recently installed a certificate authority using windows server 2008 r2. There was an old certificate authority that had went bad and the role could not be uninstalled on the bad server. The new certificate authority works with windows 2008 machines but
does not work with server 2003 machines. Mainly trying to get the domain controller certificate. At first it was stating that the rpc was unavailable for the CA. I tried to delete the remnants under the sites and services role of the old server. The error
now it states that it can not find a certificate authority. As stated above the newer machines (Server 2008) can see the certificate authority and request certificates but older machines cant. Any assistance on what to do next will be greatly appreciated.
Attached is the error I receive when trying to request a certificate through the CA mmc.
dmg
It is possible to change the hash algorithm a CA uses to support XP and 2003 "out of the box" without the hotfix.
But it would be better to have two CAs in parallel - one using a more modern algorithm and a CA supporting a "legacy" algorithm - and the latter should only be used as long as there are clients that aren't able to validate the other algorithms.
On the CA, start regedit and locate the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\CertSvc\Configuration\<Your CA>\CSP
I am assuming that the Software CNG provider is used with SHA256 or higher (not with SHA1).
Change CNGHashAlgorithm to SHA1 and restart the CA service.
The setting can be reverted by changing the value back. All certificates and all CRLs signed by this CA will use the new hash algorithm after the restart.
Similar Messages
-
Latest version not getting installed in Windows Server 2003 SP@
check the download is good
Spiceworks MD5 Checksum: 7954b4e9ded9f7afff01212eaa4ad822Hi,
I had the old version of SpiceWorks working fine on Windows Server 2003 SP2 & thought of upgrading the version to 7.4. When i double click on the downloaded setup, the windows hour glass would show up for few seconds & nothing was happening. Thinking that this was due to old version, i uninstalled it completely & removed the installed directories. Even then i am unable to install the latest version & not finding the source for old version.
Please help.
Regards
Murali S L
This topic first appeared in the Spiceworks Community -
Playbook not being seen in Windows 8.1
I have installed Blackberry Desktop and Blackberry Device Manager the Desktop software does not see the playbook when connected but the Divice Manager does!
I go the following error message when I checked in Windows Device Manager
"This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)
An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry."
What does it mean and how can I rectify the issue?
MargaretThis made me panic for a moment too, but the upgrade just made my phone forget my computer. When I unlocked my phone, it asked me whether or not I wanted to Trust the computer I was plugged into. After choosing Trust, then unplugging and plugging back in, it showed up again. Hopefully that's all that's happening for you too.
-
IPod Not Being Seen By Windows, Need Help ASAP...!
I just bought my iPod last year, when to charge it, as well as get some stuff of the HDD, but Windows pops up with an error message saying it's not working. It was working fine a few days ago. Now, for all intents and purposes it seems dead, and there is important stuff I need on the HDD...what can I do?!
Message was edited by: mlauzon76I cannot do any of that, the iPod doesn't turn on, and Windows gives an error saying the USB device is not working...so I cannot get anything off my disk. Who at Apple, do I send my iPod to, it'll be a year old for me this coming July?!
-
My problem is that the retail disk of Windows 7 Home Premium 64bit has no ei.cfg restrictions. Instead of choosing the correct operating system ID, on install, the .cfg
is coming from some where else installing a custom version of windows that is a different version of windows than on the retail install disk that I have a software key to. Even though it recognizes the key as windows 7 the operating system no longer recognizes
the retail disk it was installed from as the same version of operating system. It seems that there is a pre operating system install to a volume that cant see the ei.cfg file on the windows retail disk. It is something like Windows ME or MCE and it is hard
to get past because it acts like the operating system after install. It looks like there is a complete install of windows 7 but it is only a version of ME or MCE in the 100MB range installed to a partition volume. I am given a User account Profile within
Application Data folder in the system. The actual windows system in its entirety does not exist in the partial virtual operating systems. All the installs are to Partition Volumes on the Partition of a GPT Server Partition on a Disk
on the Hard drive. All Virtual.
Windows 7 Home Premium 64bit and 32bit retail disk is GSP1RMCHPXFRER_EN_DVD. The bios version on my Asus G75VX is American Megatrends version 206, V Bios version 80.04.97.00.13.N62G75500, EC version B14E140001. The operating system version is not the same
as the install disk. The boot configuration is; American Megatrends Bios Aptio Setup Utility installed. :\\?|GLOBALROOT\Device|HarddiskVolume1\EFI\Microsoft\Boot\BCD.Backup.0001 Software build after install is Buildlab 7601.Win7Sp1_rtm.101119-1850 Client install
BuildlabEx 7601.17514.amd64Fre.Win7Sp1_rtm.101119-1850, CSD Build Number 1130, Product ID 00 359-112-0000007-85245, Product ID 55034-112-0000007-05640. System Reserved Partition Volume X:\{F750E6C3-38EE-11D1-85E5-00C04FC295EE} MININT-F26UD4N. Link to 170MB
.reg file in text format http://1drv.ms/1m9RXL7.
The above information was taken after an install from the Microsoft Windows 7 64 bit retail disk purchased at Fry's and installed to my Asus G75VX. It is a Network Managed Client Server configuration that installs from the retail disk.I have been dealing with this problem since the day I purchased the first notebook from Best Buy configured this way and it was not even an Asus. It was a Samsung Chronos i7. The Asus G75VX I have now is the third notebook in a row purchased from Best Buy
with the configuration right out of the un open retail box. None out of the three came with windows 7 installed. They had windows 8 64bit installed with the configuration. I purchased Windows 7 Home Premium 64 bit attempting to get around the configuration
problem.
My main concern is that I use computers to do my legal documents in court cases in the United States Federal Courts and I am a pro se litigator and I have been litigating a civil action since 2011 that is still open in the federal court. I am also legally
disable and covered by Federal Communications Act FCC Rule 255. This configuration has Telephone software and equipment, Management Software and equipment, and Networking software and equipment all covered within FCC Rule 255. My notebook is unusable for litigation
or personal use as a Publicly Managed Network Client Server. I paid $1350.00 of my Social Security Disability income for the Asus G75VX and another $216.00 for Windows 7 Home Premium 32 and 64 bit DVD and that is not counting a list of other things to
now have a personal notebook computer I have to sat down beside me in public libraries, Colleges etc. to use their computers to do my legal work. It is illegal and total wrong and it is a violation of the Bill of Rights First and Fourth Amendments and Title
VI of the Civil Rights Act of 1964 and the American with Disability Act outside of 255. -
Certificate authority does not start on migrated 2012R2 server
I have migrated the root CA from windows 2003 to 2012R2 according to TechNet instructions
http://technet.microsoft.com/en-us/library/ee126140(v=ws.10).aspx
The service does not start.
The error shown is:
The dependency service does not exist or has been marked for deletion. 0x433 (WIN32: 1075 ERROR_SERVICE_DEPENDENCY_DELETED)
In the event log:
The Certificate Services service depends on the following service ProtectedStorage. This service might not be installed.
Thanks,
James.
James.Hi Mark,
Thanks for helping me out here.
The CA is enterprise, has the same name and there is no hardware module. It is not on a Domain Controller. Its history is that it was a Windows 2000 CA that was upgraded to 2003 using a similar method (many years ago). There has been no customisations
or any changes from the default values.
I think I found the mistake I made. When I had edited the registry settings backup file, I had only changed file locations. I needed to also go through all the settings and delete those from the file that are not listed on the document. There was one setting
about dependent services that should not have been brought over to the new service. After I did this, the service started ok.
I also found I made another mistake, that I had not backed up the certificate templates from the old server and so could not restore them to the new server. When I go to the CA manager and click on Certificate Templates, it shows an error "Template
information could not be loaded".
Do you know if this is important?
Do I need to get the old templates or can I create new ones? We have not customised anything. I did not connect the new CA to the network yet, so it can not access AD.
That step is in another document for "preparing to migrate". Of course I googled straight into the "Migrating.." document, so missed it from my work list.
Regards,
James.
James. -
Oracle R12 EBS Forms not getting invoked in Windows server 2003
Hi,
I have installed Oracle EBS R12 in my personal laptop with Win2003 server as base OS. Until all these days I was able to launch the forms and work on EBS without any issues.
Today when I tried to login in and open a form, the system is just not responding. It is not launching the form applet. I checked the Java options and everything remain correct. My internet explorer settings are also proper and no firewall is existing. JRE version installed is 1.6.0_07. I even tried invoking test form from Oracle Forms options, but no form was launched.
The same issue happened a month before and I ended up installing Oracle again. However, I dont want to go to that option and requesting your valuable help to get this fixed.
Java console log is as mentioned below. Kindly check and help me getting this issue fixed.
Header 1
Java Plug-in 1.6.0_07
Using JRE version 1.6.0_07 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\Administrator
network: Loading user-defined proxy configuration ...
network: Done.
network: Loading proxy configuration from Internet Explorer ...
network: Done.
network: Loading direct proxy configuration ...
network: Done.
network: Proxy Configuration: No proxy
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
liveconnect: Invoking JS method: document
liveconnect: Invoking JS method: URLAsif,
Finally I got the issue fixed. Did not download Java or any JRE version; because, the available version itself was Java 6 and the JRE version was 1.6.0_07.
The issue seems to be that, if the 'JRE Auto-Download' in Java control panel is set to 'Always Auto-Download' then java is trying to use the latest version available in their server. I then changed the setting to point to 'Prompt User' and tried opening a form and it worked!!!
Sounds like a solution to this issue and hope it doesn't recur. Will keep posted if I face any. Thanks for your help!
Navigation:
DO NOT TRY TO CLEANUP OR RE-INSTALL JAVA. TRY THE BELOW BEFORE YOU PERFORM SUCH THINGS.
Step1: Clear all cache and cleanup the history/temp memory in your browsers.
Step2: Close all your browsers (IE, Netscape, Chrome, Mozilla etc).
Step3: Check if your Java version is SE6 and JRE is pointing to version 1.6. You can check this in Java control panel -> General and Java tab respectively.
Step3: Control Panel --> Java (DClick) --> Go to Advanced tab --> expand "JNLP File/MIME Association" and "JRE Auto-Download" --> Select "Prompt User" in both and "Apply"
In addition to this have the "Debugging" option enabled and "Show console" in the same tab.
Step4: Open IE and login to Oracle Apps. Click on any form. now Java will enable and you will be able to see the console messages. In a few moments(depending on your system speed), the forms should be displayed.
If this doesn't fix the issue, then copy paste the entire console message and post a question in this forum for help. Enjoy your EBS!! -
WSUS - "this computer has not reported status yet" Windows server 2003
I just did a successful installation of wsus 3.0 Sp2
I am able to see all the machines but the issue starts there
Each of the machine show this error " this computer has not reported status yet"
i have tried but hasnt manage to resolve this issue
kindly guide me on how i can resolve it
thx2013-06-26 14:20:36:633
644 478
AU ## END ## AU: Search for updates [CallId = {4E48EF51-0D7C-458A-A575-9BA1B4799175}]
2013-06-26 14:20:36:633
644 478
AU #############
2013-06-26 14:20:36:634
644 478
AU Successfully wrote event for AU health state:0
2013-06-26 14:20:36:634
644 478
AU AU setting next detection timeout to 2013-06-26 16:20:36
2013-06-26 14:20:36:634
644 478
AU Setting AU scheduled install time to 2013-06-27 00:00:00
2013-06-26 14:20:36:634
644 478
AU Successfully wrote event for AU health state:0
2013-06-26 14:20:36:634
644 478
AU Successfully wrote event for AU health state:0
2013-06-26 14:20:41:581
644 1338
Report REPORT EVENT: {8DFBD635-02A8-4773-9DF8-80880752189A}
2013-06-26 14:20:36:577+0300 1
148 101
{D67661EB-2423-451D-BF5D-13199E37DF28}
1 800b0001
SelfUpdate Failure
Software Synchronization Windows Update Client failed to detect with error 0x800b0001.
2013-06-26 14:20:41:621
644 1338
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2013-06-26 14:20:41:621
644 1338
Report WER Report sent: 7.6.7600.256 0x800b0001 D67661EB-2423-451D-BF5D-13199E37DF28 Scan 101 Managed
2013-06-26 14:20:41:621
644 1338
Report CWERReporter finishing event handling. (00000000)
2013-06-26 14:22:41:605
644 1338
Report Uploading 1 events using cached cookie, reporting URL = http://NTKE01/ReportingWebService/ReportingWebService.asmx
2013-06-26 14:22:41:612
644 1338
Report Reporter successfully uploaded 1 events.
2013-06-26 15:25:02:219
644 13d0
AU Triggering AU detection through DetectNow API
2013-06-26 15:25:02:219
644 13d0
AU Triggering Online detection (non-interactive)
2013-06-26 15:25:02:220
644 718
AU #############
2013-06-26 15:25:02:220
644 718
AU ## START ## AU: Search for updates
2013-06-26 15:25:02:220
644 718
AU #########
2013-06-26 15:25:02:221
644 718
AU <<## SUBMITTED ## AU: Search for updates [CallId = {65FA8DBB-1567-45A0-8ECB-103EFAB1C0A3}]
2013-06-26 15:25:02:221
644 179c
Agent *************
2013-06-26 15:25:02:221
644 179c
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-06-26 15:25:02:221
644 179c
Agent *********
2013-06-26 15:25:02:221
644 179c
Agent * Online = Yes; Ignore download priority = No
2013-06-26 15:25:02:222
644 179c
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2013-06-26 15:25:02:222
644 179c
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2013-06-26 15:25:02:222
644 179c
Agent * Search Scope = {Machine}
2013-06-26 15:25:02:242
644 179c
Setup Checking for agent SelfUpdate
2013-06-26 15:25:02:242
644 179c
Setup Client version: Core: 7.6.7600.256 Aux: 7.6.7600.256
2013-06-26 15:25:06:522
644 179c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wuident.cab:
2013-06-26 15:25:06:530
644 179c
Misc Microsoft signed: Yes
2013-06-26 15:25:06:533
644 179c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-06-26 15:25:06:558
644 179c
Misc Microsoft signed: Yes
2013-06-26 15:25:08:643
644 179c
Misc Validating signature for C:\Windows\SoftwareDistribution\SelfUpdate\wsus3setup.cab:
2013-06-26 15:25:08:647
644 179c
Misc Microsoft signed: Yes
2013-06-26 15:25:08:700
644 179c
Setup Determining whether a new setup handler needs to be downloaded
2013-06-26 15:25:08:700
644 179c
Setup SelfUpdate handler is not found. It will be downloaded
2013-06-26 15:25:08:700
644 179c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-06-26 15:25:09:376
644 179c
Setup Setup package "WUClient-SelfUpdate-ActiveX~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-06-26 15:25:09:376
644 179c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-06-26 15:25:09:388
644 179c
Setup Setup package "WUClient-SelfUpdate-Aux-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-06-26 15:25:09:388
644 179c
Setup Evaluating applicability of setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256"
2013-06-26 15:25:09:406
644 179c
Setup Setup package "WUClient-SelfUpdate-Core-TopLevel~31bf3856ad364e35~amd64~~7.6.7600.256" is already installed.
2013-06-26 15:25:09:406
644 179c
Setup SelfUpdate check completed. SelfUpdate is NOT required.
2013-06-26 15:25:09:466
644 179c
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2013-06-26 15:25:09:466
644 179c
PT + ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}, Server URL = http://NTKE01/ClientWebService/client.asmx
2013-06-26 15:25:09:536
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:25:09:536
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:25:09:536
644 179c
PT Server URL = http://NTKE01/SimpleAuthWebService/SimpleAuth.asmx
2013-06-26 15:25:17:456
644 179c
PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2013-06-26 15:25:17:456
644 179c
PT WARNING: SOAP Fault: 0x00012c
2013-06-26 15:25:17:457
644 179c
PT WARNING: faultstring:Fault occurred
2013-06-26 15:25:17:457
644 179c
PT WARNING: ErrorCode:ConfigChanged(2)
2013-06-26 15:25:17:457
644 179c
PT WARNING: Message:(null)
2013-06-26 15:25:17:457
644 179c
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
2013-06-26 15:25:17:457
644 179c
PT WARNING: ID:78fa31e8-8714-47b9-8ae3-182ecb2d9f74
2013-06-26 15:25:17:477
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:25:17:477
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:25:17:477
644 179c
PT Server URL = http://NTKE01/SimpleAuthWebService/SimpleAuth.asmx
2013-06-26 15:27:50:499
644 718
AU AU received policy change subscription event
2013-06-26 15:31:23:807
644 13d0
AU Triggering AU detection through DetectNow API
2013-06-26 15:31:23:807
644 13d0
AU Piggybacking on an AU detection already in progress
2013-06-26 15:31:27:317
644 13d0
AU Triggering AU detection through DetectNow API
2013-06-26 15:31:27:317
644 13d0
AU Piggybacking on an AU detection already in progress
2013-06-26 15:36:56:942
644 179c
PT WARNING: SyncUpdates failure, error = 0x8024400A, soap client error = 10, soap error code = 0, HTTP status code = 200
2013-06-26 15:36:56:942
644 179c
PT WARNING: PTError: 0x8024400a
2013-06-26 15:36:56:942
644 179c
PT WARNING: SyncUpdates_WithRecovery failed.: 0x8024400a
2013-06-26 15:36:56:942
644 179c
PT WARNING: Sync of Updates: 0x8024400a
2013-06-26 15:36:56:942
644 179c
PT WARNING: SyncServerUpdatesInternal failed: 0x8024400a
2013-06-26 15:36:56:942
644 179c
Agent * WARNING: Failed to synchronize, error = 0x8024400A
2013-06-26 15:36:56:943
644 179c
Agent * WARNING: Exit code = 0x8024400A
2013-06-26 15:36:56:943
644 179c
Agent *********
2013-06-26 15:36:56:943
644 179c
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates]
2013-06-26 15:36:56:943
644 179c
Agent *************
2013-06-26 15:36:56:943
644 179c
Agent WARNING: WU client failed Searching for update with error 0x8024400a
2013-06-26 15:36:56:959
644 8dc
AU >>## RESUMED ## AU: Search for updates [CallId = {65FA8DBB-1567-45A0-8ECB-103EFAB1C0A3}]
2013-06-26 15:36:56:959
644 8dc
AU # WARNING: Search callback failed, result = 0x8024400A
2013-06-26 15:36:56:959
644 8dc
AU # WARNING: Failed to find updates with error code 8024400A
2013-06-26 15:36:56:959
644 8dc
AU #########
2013-06-26 15:36:56:959
644 8dc
AU ## END ## AU: Search for updates [CallId = {65FA8DBB-1567-45A0-8ECB-103EFAB1C0A3}]
2013-06-26 15:36:56:959
644 8dc
AU #############
2013-06-26 15:36:56:959
644 8dc
AU Successfully wrote event for AU health state:0
2013-06-26 15:36:56:959
644 8dc
AU AU setting next detection timeout to 2013-06-26 17:36:56
2013-06-26 15:36:56:959
644 8dc
AU Setting AU scheduled install time to 2013-06-27 00:00:00
2013-06-26 15:36:56:959
644 8dc
AU Successfully wrote event for AU health state:0
2013-06-26 15:36:56:960
644 8dc
AU Successfully wrote event for AU health state:0
2013-06-26 15:37:01:943
644 179c
Report REPORT EVENT: {48D1738E-F97A-45A4-8AB5-ECBE8FBDDF8F}
2013-06-26 15:36:56:943+0300 1
148 101
{00000000-0000-0000-0000-000000000000}
0 8024400a
AutomaticUpdates Failure
Software Synchronization Windows Update Client failed to detect with error 0x8024400a.
2013-06-26 15:37:01:950
644 179c
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2013-06-26 15:37:01:950
644 179c
Report WER Report sent: 7.6.7600.256 0x8024400a 00000000-0000-0000-0000-000000000000 Scan 101 Managed
2013-06-26 15:37:01:951
644 179c
Report CWERReporter finishing event handling. (00000000)
2013-06-26 15:39:01:979
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:39:01:979
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:39:01:979
644 179c
PT Server URL = http://NTKE01/SimpleAuthWebService/SimpleAuth.asmx
2013-06-26 15:39:02:302
644 179c
PT WARNING: GetCookie failure, error = 0x8024400D, soap client error = 7, soap error code = 300, HTTP status code = 200
2013-06-26 15:39:02:302
644 179c
PT WARNING: SOAP Fault: 0x00012c
2013-06-26 15:39:02:302
644 179c
PT WARNING: faultstring:Fault occurred
2013-06-26 15:39:02:302
644 179c
PT WARNING: ErrorCode:ConfigChanged(2)
2013-06-26 15:39:02:302
644 179c
PT WARNING: Message:(null)
2013-06-26 15:39:02:302
644 179c
PT WARNING: Method:"http://www.microsoft.com/SoftwareDistribution/Server/ClientWebService/GetCookie"
2013-06-26 15:39:02:302
644 179c
PT WARNING: ID:38d9b059-92f2-4248-9a71-be1e33841fcb
2013-06-26 15:39:02:311
644 179c
PT WARNING: Cached cookie has expired or new PID is available
2013-06-26 15:39:02:311
644 179c
PT Initializing simple targeting cookie, clientId = 01f95362-b793-4a75-bc97-94e49f6b63aa, target group = , DNS name = pcke65.kenya
2013-06-26 15:39:02:311
644 179c
PT Server URL =
AS you can see the log file is bigggggg..
pls advise -
I have tried to install Oracle 9i (9.2.0.2) in Windows Server 2003 x64 Enterprise Edition with Intel Xeon (EM64T) processors.
When I run setup.exe I get an error: "The image file C:\Documents and settings\administrator.SERVERNAME\my documents\92021 win64_disk1\setup.exe is valid, but is for a machine type other than the current machine".
I have to install Oracle 9i in that server but I can't run the installation. Is there a way to solve this problem, is there a patch that can solve this? Anyone know something about this problem?
Thanks a lot!!!
I'm desperated!!Hi,
reply to my own question:
In the docs provided with the downloads for Oracle Database Server 9i x64, I found that this version requires either
- Windows Server 2003 Datacenter Edition for 64-Bit Itanium 2 Systems
or
- Windows Server 2003 Enterprise Edition for 64-Bit Itanium 2 Systems
So I guess, the only X64 platform being supported under Windows Server 2003 (both Datacenter / Enterprise Editions) is Itanium CPUs ...
... though this is not (!!!) clearly stated in the download link (other/newer versions are listed more precisely - I guess it's a matter of an old link: no Intel Xeon / AMD Opterons were available (???) when Oracle 9i database server was published).
So I'll give it a try with 10g database server ;-)))
Regards,
Thomas Heß -
Quicktime 7.1 won't install with MS06-015 on Windows Server 2003
Quicktime 7.1 will not install correctly on Windows Server 2003 with MS06-015 - Vulnerability in Windows Explorer Could Allow Remote Code Execution installed.
We have tried this on at least 6 machines. All fail at the last step in the install process with the following error:
"Unhandled Exception:
Error Number: 0x80040707
Description: DLL function call crashed: QTInstallCode.QuickTimePostInstallProc
Setup will now terminate"
This leaves Quicktime (and iTunes if installed) broken.
Removing MS06-015 allows Quicktime 7.1 to be installed but leaves the gaping holes fixed by MS06-015 wide open - not a good place to be.
It's more than likely that this is caused by Quicktime 7.1 being blocked by Verclsid.exe which is installed by MS06-015. See this Knowledge base article - You may experience problems in Windows Explorer or in the Windows shell after you install security update MS06-015 for more information.
Can anyone else please confirm this or better still can this please be fixed?
Cheers,
SimG'day Sam
First I gonna tell you don't try this at work Server...
I had try this on Windows Server 2003 Standard Edition and it work fine/___sbsstatic___/migration-images/migration-img-not-avail.png/___sbsstatic_ __/migration-images/migration-img-not-avail.png
After I had been test and test..... Look like QT-7.1 doesn't like(Shell32.dll Ver. 6.00.3790.2662).
There is way to fix this problem.
1. Send me an email, I will send you back (Shell32.dll Ver.6.0.3790.2534)<< This version working with QT-7.1 after I uninstall all the HotFix Update that relate to Shell32.dll.
How to replace this dll file
Don't use Search to find this file.
Click into C:\ and type in the Address bar C:\windows\system32\ then find the current Shell32.dll > Rename it to some thing else, just incase if it not working for you, so you still have the orignal file.
Then copy the file I send you to the System32 folder.
Restart you PC and try to install again....
Good Luck
Let me know if it not working...
Cheer... -
EP6.0 installation on windows server 2003
I am trying to install EP6.0 on Web AS 6.40 on a windows server 2003 machine with 447MB ram.The setup stops at phase 22 (start SAP J2EE engine). I have seen in the SAP MMC .The instance JC00 has not started fully.It is always yellow.Trying to restart it also has had no effect.Can anyone suggest what might be the problem?
Thanksthis phase take time to start the SAP J2EE engine, in my case it took almost 30 mins start engine. Just wait and watch.
Regards,
Rajesh Kokane -
Windows Server 2003 AD Migration Problem
Hi Team,
I'm currently working on a project on Migrating our Windows Server 2003 AD server (old Machine) to our new Windows Server 2003 machine (PDC-AD). I successfully promoted our new AD server (PDC-AD) as domain controller, but upon checking, the server is not promoted
as Global catalog with following errors shown below.
C:\Documents and Settings\Administrator.PDC-AD>dcdiag /q
Warning: PDC-AD has not finished promoting to be a GC.
Check the event log for domains that cannot be replicated.
Warning: PDC-AD is not advertising as a global catalog.
Check that server finished GC promotion.
Check the event log on server that enough source replicas for the GC ar
e available.
......................... PDC-AD failed test Advertising
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... PDC-AD failed test frsevent
An Information Event occured. EventID: 0x40000617
Time Generated: 04/03/2014 11:28:47
(Event String could not be retrieved)
An Information Event occured. EventID: 0x4000062A
Time Generated: 04/03/2014 11:28:47
(Event String could not be retrieved)
An Information Event occured. EventID: 0x40000456
Time Generated: 04/03/2014 11:28:47
(Event String could not be retrieved)
......................... PDC-AD failed test kccevent
C:\Documents and Settings\Administrator.PDC-AD>\
Is there any tool I can use to further isolate the problem?.
Thanks
Mark D.Hi Vivian,
Thanks for your reply, for additional info, I didn't use Active directory migration tool. Below is my step-by-step procedure.
1. Installed Windows Server 2003 on a new machine.
2. Promote the new Windows Server 2003 machine as a Domain controller. New Windows Server 2003 machine is promoted successfully.
3. But upon checking of the server, the new machine is not promoted as a Global Catalog.
Below are the event logs from Directory services.
1. Promotion of the local domain controller to a global catalog has been delayed because the directory partition occupancy requirements have not been met. The occupancy requirement level and current
domain controller level are as follows.
Occupancy requirement level:
6
Domain controller level:
0
The following registry key value defines the directory partition occupancy requirement level.
Registry key value:
HKeyLocalMachine\System\ CurrentControlSet\Services\NTDS\Parameters\Global Catalog Partition Occupancy
Higher occupancy requirement levels include the lower levels. The levels are defined as follows:
(0) Indicates no occupancy requirement.
(1) Indicates at least one read-only directory partition in the site has been added by the Knowledge Consistency Checker (KCC).
(2) Indicates at least one directory partition in the site has been fully synchronized.
(3) Indicates all read-only directory partitions in the site have been added by the KCC (at least one has been synchronized).
(4) Indicates all directory partitions in the site have been fully synchronized.
(5) Indicates all read-only directory partitions in the forest have been added by the KCC (at least one has been synchronized).
(6) Indicates all directory partitions in the forest have been fully synchronized.
2. The Global Catalog has no intra-site sources for at least one partition. Replication to the Global Catalog is limited to scheduled replication from inter-site sources.
Regards, -
Mail cannot open hyperlink of file located in windows server 2003
My macbook air has access to shared directory located in a windows server 2003 machine via smb mount. However, when I get an email containing a hyperlink of a file located in the shared directory, mail cannot open the link. Any ideas?
You might read the EULA and confirm the issue I have mentioned. I might not be correct in my estimate, but just gave a sounds like opinion. If it is a violation, then removing it is wise. Typically, Acrobat must be installed on each individual machine. There are multiple license options and server options, but you would need to contact Adobe for more information on those areas. Hope you can get them to talk to you in such a case.
-
Question about locking down IIS on an SCCM 2012 distribution point on a Windows Server 2003
Hello. My environment is SCCM 2012 SP1. I will be setting up several distribution points on Windows Server 2003 machines. This summer I have a project to configure SCCM to use our PKI infrastructure. Unfortunately, this will not be in place before I need
to set the Windows Server 2003 machines up as distribution points. I am not an IIS expert. When I set the DPs up, I am only 1)Installing IIS, 2)Enabling BITS extensions, and 3)Enabling WebDav. Is there anything I should do to ensure they are as secured as
possible?I would say that installing Windows Server 2003 is not "as secure as possible" due to it's end of support coming soon.
http://support.microsoft.com/lifecycle/default.aspx?LN=en-us&p1=3198&x=10&y=12
And I would say that we need more information about your scenario to tell you how it is as secure "as possible". Since that would be shutoff at the bottom of the ocean. But that wouldn't be that useful server.
Im guessing that you will run these servers for internal
clients ONLY. And that you have a decent edge protection as well as physical protection. Then I would start by having the lastest secrutiy patches, running antivirus software and having the firewall turned ON. I would make sure that
only necessary logons would be possible and that the servers wouldn't cache any credentials. Typically a DP NEVER holds sensitive data so no real need to secure them more than that in a normal scenario if you ask me.
A final notice, this is a baseline
for a common scenario. You would need to scale and change that
in order to apply for your scenario.
Tim Nilimaa | Blog: http://infoworks.tv | Twitter: @timnilimaa -
My ipad is not being seen by itunes in Windows 7. I uninstalled then reinstalled itunes it started working for a while then it stopped. I get a message stating that the device is not recognized or the device is defective replace device. Anyone have a fix.
At present I have no power to the Gen 7, so need to get some power to it I think. I pressed the buttons as you suggested, but nothing is showing up at this point. Thank you for your response as the more I can rule out before I take it back the better I think.
Maybe you are looking for
-
Isight not working with ichat but works with Google talk and photo booth
In message beta it say that I have no cam. But in device manger it lists isught under usb.
-
TableView class in HTML package- WYSIWYG Editor HTML 4.0
I am making a WYSIWYG HTML editor using java Swings API. I realised while working with tables that class TableView in the html package is responsible for rendering the table on JEditorPane. Can somebody tell me that where, while rendering the table t
-
I am having problems printing a Keynote file to a Keyocera c3232
I am having problems printing a Keynote file to a Keyocera c3232. Its a 100MB file sent from a Mac Pro 2 x 2.4 GHz Quad Core to a the C3232 which has 768MB of memory installed. I have even optizmized the PDF down to 30 mb and still taking about a 4
-
Dynamic IView displaying using Table
Hi I hava a web dynpro application . In which i have a table with 2 columns. when i am selecting a row in the table it should display different Iviews depending on the column values. replay ASAP
-
Changing text to link with hover capability
I have some text I have succesfully changed to become a link and would like to introduce the hover command to change colour; I would like to do this in the html page and have it alter the css sheet simultaneously. I would also like it to update every