Certificate for material transfer

Hi all,
   I have a material A which is produced in plant 1013 and inspection lot is also generated for the same in the plaant 1013
Now i am transfering ( stock transfer plant to plant) this material (A) to another plant 1025 .Where i will only pack this material and create delivery for the matrial B ( A+ packing)
now i want quality certificate for this delivery and the data should come from the inspection lot of material A.
Pls tell me how i will make assignemnt or setting in certificate profile
Asd

Dear asd,
As per STD SAP the cos profile can is not maintained plant wise, so you can use common profile for the material globally for all the plants.
Secondly the inspection type normally get assigned to the cos profile. Go to Header screen of the profile, and press F1 help to the grab the further information regarding that field.
Then,
You have not activated any inspection type for the other plant, it means you will not inspect the material at that reeving plant. So you can print the COA for the only lot you would have for the material.
"Above all, to print the COA, you must have inspection lot."
OR
As another option what you can do is activate QM for the plant 1023. and copy results of the inspection lot of plant 1013.
Now to know the functionality of copying inspection results.
You can search using term "Copy inspection result from one lot to another" at SDN search.
Then take COA print from plant 1023
Regards,
Shyamal
Edited by: Shyamal Joshi on Jul 25, 2008 5:12 PM

Similar Messages

  • Internal revenue for material transfer between plants

    Dear All,
    We are implementing ECC6.0 with Material Ledger for Actual Costing & Document spliiting with profit center as mandatory (for each plant one profit center).
    Thermal Power is generated from thermal plant & transferred to another Production plant. We have defined each plant as profit center.
    Client wants to transfer the power with different price than the standard price & during month end, need the internal revenue in power plant.
    Ex :
    Thermal Plant 1 :
    Material : Power, Material Type : SFG, Price Control : S.
    Standard price : Rs. 5.00 / KWH.
    Total Transfer for the month is 100 KWH at the transfer price of Rs.6.00/ KWH.
    Duirng the month end, need a internal revenue to be accounted against the power plant profit center(Rs.1.00 * 100 KWH = Rs. 100.00).
    Would like to know the method to map in SAP apart from Transfer pricing method.
    Rgds
    SMK Ganesh

    I think you would have only transfer pricing which can do this through internal revenue. Or try doing the plant to plant transfer as internal sales creating as customer and vendor with a different price other than the std cost....

  • Incoming Certificate Request for Stock Transfer(inspection type 08)

    Hi Everybody,
    The system asks for incoming certificates when a material is received from external vendor(Inspection Type 01).
    Can we configure the QM system such that system requests incoming certificate for material coming via Stock Transfer(Inspection Type 08) also ? If yes, please give details regarding how to do it.
    Regards,
    Manish.

    Talk to your purchasing guru.  Stock transports can also be set up to look like incoming 01 inspections.  I believe it has to do with the delivery type that is assigned to the order type.  Using a different delivery type wiht the order, the system will treat it as an external vendor's delivery and will create 01 inspection lots instead of 08. 
    It MIGHT also ask for the certificate.  I won't swear to that as it was stated by the previous poster, this is controlled by the control key and that is usually linked to the purchase orders.  I have known some places to use purchase orders for replenishment supply from other plants.
    Craig

  • Accounting Entry for Material has Standard Price

    Hi,
    If Material has standard price option, what is the accounting entry for the time of Direct Goods Receipt and from the production.
    Material Value is : Rs. 100/-
    Purchased value is : 90/-
    from production : 110/-
    Thanks in advance

    Hi,
    In STO, material posting with price valuated from issuing plant price. In your case, the transportation cost, you can capture to separate G/L account and pay to transport vendor.(In STO , one plant is vendor and another plant is customer, so a third party vendor involved for material transfer)
    OR else use separate own Custom Condition Type  with Special Condition Category instead of condition type P101 which have Condition Category "G", only responsible to pick  the internal price
    Regards,
    Biju K

  • Material to Material Transfer using Movement Type 309

    Hi,
    We have activated the material ledger.
    Issues:
    When we transfer material A to Material B using Movement Type 309 the price difference from Material A was not allocated to Material B after executing CKMLCP.
    But the another company who using the materail to material transfer, the price difference was allocated to receiving material.

    Hi,
    Please check SAP Note 167722 to able to do multi-level price determination for material transfer with using modification.
    best regards, Takashi

  • Error during creation of transfer orders for material

    Hi,
            We are doing a transfer of stock from one storage with WM to a storage without WM.
    But system does not finish the process automatically displaing the following error message:
    "Error during creation of transfer orders for material document 49000XXXX"
    System cannot find source storage bin
    Thanks in advance for the help
    Regard
    Enzo

    your picking strategy does not find the bin where the material is.
    So you need to check what value you have entered for picking in WM view of material master.
    then you have to check where your material is (storage type and bin)
    then you need to check customizing to where what storage types are included in the picking strategy that is tight to the material master entry.

  • Error during creation of transfer orders for mateRIA

    hi gurus,
    I am getting an error while moving material from sl0c2 to sloc1 which is connected to wh by mvmt 321. the document is getting posted and the stock is coming to sloc1,but the error is
    "Error during creation of transfer orders for mateRIAL.how to correct the error.
    regards
    murugan

    Hi,
    The material is maintained at the Warehouse level, hence warehouse transactions have to be completed, by creating a transfer order and the confirmation of the same will create a transfer posting from SL1 to SL2 in the system. This is trigerred automatically depending on the sytem configuration.
    Regards,
    raghu

  • MATERIAL LINK TO ONE SAP SYSTEM TO ANOTHER SAP SYSTEM FOR IDOC TRANSFER

    Hi Experts,
    How the  MATERIAL LINK TO ONE SAP SYSTEM TO ANOTHER SAP SYSTEM FOR IDOC TRANSFER?
    Scenario : when 2nd system create the invoice,it will create a po in the 1st system.
    51 error msg we are getting material does not exists.but the material is available in the receiving plant.
    Please suggest

    If you say the material master is available in the 1st system (where you create the order), then the material number in the IDOC  may not match with the material number in your database.
    leading zeros. material number stored as alphanumeris instead of numeric.

  • How to consider internal transfer movement for material aging Z report

    Hello Expert ,
    we are developing Z repot for material ageing .
          In this we are using BSIM table  but in our case internal transfer movement such as ( 411 ,412 ,413 ,etc.) create debit credit entry in BSIM for this reason value of material getting correct but age of material get disturbed .
    we are having sale order stock (E), WBS stock(Q) , Collective stock , Vendor Stock (o) & stock transfer between stock type possible.
    For all above consideration how to calculate material Age.

    Dear experts
    i have the same issue, could you pls advise the answer?
    another question; how to unify the stock locations rather than maintaining different locations such as sales order stock, free goods, commercial stock and in the same time the margin reporting to be based on transaction/line item in sales invoice?
    thanks

  • Material Ledger for Stock Transfer Postings

    Hi All,
    I have a question about the way material ledger is calculated for stock transfer postings (movement type 641). I will give an example to illustrate this issue:
    Material A has a Standard cost of $10
    Material B has a Standard cost of $8
    During the month 100 units were transferred from material A to Material B. This created a financial posting as follows:
    Credit Material A -          $1000                               
    Debit Material B -           $800
    Debit Price Difference    $200
    This price difference of $200 was used in the calculation of Actual cost for material B
    However, the Actual Cost for Material A was $9. I would have expected the system to use this actual cost to calculate the difference to be posted to material B. Hence the difference used in Material B should have been $100 {(9 – 8) X 100} and not $200.
    Has anyone had a similar issue, or know how the system resolves this (if at all)?
    Points will be rewarded for relevance.
    Thanks

    Dave, I see that your process is slightly different to mine. We do not revalue inventory at month end, instead the material ledger program posts the revalued amount to a reserve account and the actual cost is only a statistical entry. The material ledger calculation is reversed automatically in the new month and the standard price is used for valuation.
    I think this might make it difficult for the system to value STO's at actual. I may need to check with SAP.
    Thanks

  • Create transfer order for material document - 4.6C system

    Hi Gurus
    Can any one provide me the function module or BAPI to create transfer for material document in 4.6c system. I have to give input as supply storage type and bin and destination storage type and bin while execting the function module.
    Thank you in advance
    Regards
    Sarath

    Sarath,
    Thanks for responding, I finally found my answere via Thread: create transfer order for material document - 4.6C system
    Thanks again.

  • How to find out the Idoc number triggered for any material transfer frm SAP

    Hi Folks,
    Can any body let me know How to find out the Idoc number triggered for any material transfer frm SAP?
    Do we have any navigation for that in MM03?
    Thanks,
    SPMD.

    Hi Shabbirmdpasha,
    If you know the user name then you can find the idoc numbers created by that user. But the problem here is it not only gives the material it gives all the idocs created by that user. Go to SE16 --> table name EDIDS --> here you can fill the approximate date and in UNAME give the userid and execute. This will give all the idocs created by that user. I know it is only a partial solution.
    Also would suggest to post the same in abap forums for more answers:
    ABAP Development
    Regards,
    ---Satish

  • Materia transfer Procedure for asset  material within the plant

    Hi
    We need to set the process in SAP for asset material transfer from onle location to another within the plant and also send back defective one back to vendor.
    Please suggest the procedure to do the same SAP.
    Regards
    venkat
    Edited by: garapati on Feb 29, 2008 6:35 AM

    hi,
    clarify that material code is used or not.
    if material code is used then use 301 mov type.
    regards
    points if solved/helpful
    Edited by: RAMESH ARORA on Feb 29, 2008 12:04 PM

  • MATERIAL TO MATERIAL TRANSFER  FOR  FINISHED GOOD

    In case of material to material transer for Finished Good Which TCode and Movement Type is used?

    go to the transaction MB1B WITH THE mvmt 309
    for material to material tranfer.
    else go to MIGO and give the option transfer mode and mvmt for 309.

  • Release Strategy for inter Storage Loc Material transfer within same Plant

    Hi Guru's
    I hope all are doing good. I gota small concern to share with you. Is it possible to apply Release Strategy between two Storage Locations within same Plant for Material Movement?
    Many Thanks
    SONAL

    Release Strategy cannot be assigned in material document.
    However you can restrict this at authorisation level for T code MIGO_TR.
    Regards
    Bhavesh Mistry

Maybe you are looking for