Certificate issue for order response messages to Tradeplace

hi,
it appears that you may not even get that message out to us due to a cert issue. In fact it is not finding the cert probably (u201CNo trusted certificate found # nullu201D).
IDoc processed successfully through XI prod but there is error in processing through AS2 (BIS6).
Error : javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: No trusted certificate found
please advise

Hi,
Ask your BASIS team to check deployed AS2 certificate of your customer on PI Prodcutions server. If this is FIRST AS2 message you are sending to your partner means the AS2 certificate is not yet deployed on PI server. If it is not,The certificate may be expired and that needs renewal. So ask your AS2 partner to provide valid Production AS2 cert. and ask BASIS to deploy the same.
Once valid certificate deployed check your config once and try to resend the message from Adapter engine.
Thanks
Veera

Similar Messages

Security certificate issue for Provider Hosted App (SP Online)

Hi all,
I am having a hard time with SP Online debugging a basic provider hosted app.
Steps I have taken to create the app:
created a new provider hosted app in Visual Studio 2013 and setting my SP Online debugging site (wich works perfectly for SP hosted apps).
Chose Azure ACS option, although I do not have an Azure account
When I deploy the app I get to the page on my debugging site where I must choose "Trust It", but when I do I get the message that the Connection is Unsecure/unsafe:
How can I fix this? Do I need to create an Azure account for debugging purposes already? Or is there another way to solve the problem?

Hi,
I understand that you get Security certificate issue for Provider Hosted App (SP Online).
Per my knowledge, you need to create an Azure account for debugging purposes.
To create a SharePoint 2013 app for Office 365 and publish it to an Azure web site, you can refer to:
http://blogs.msdn.com/b/kaevans/archive/2014/02/24/creating-a-sharepoint-2013-app-with-azure-web-sites.aspx
Best Regards,
Linda Li
Linda Li
TechNet Community Support

With out goods issue for order system should not allow for order confirmati

Dear all
with out goods issue system should not allow for order/operation confirmation.
how it is possible.
Regrads
Srinivas

Dear ,
In some cases we required to do confirmation or TECO without GI .
We can change it as per req using user exit
Regards,
Ishwar

Different exchange rate on each material issued for order

Hi all,
I have strange situation like this. Controlling area currency is USD and object/company code currency is THB. When i do Good Issue for production order, system use different exchange rate for each material although all of these material are posted on the same posting date for good issue.
Example :
I do Good issue material A and material B for production order 100000 at posting date 01.03.2008. When i look into cost analysis and look for USD currency, i found that exchange rate for material A is 30 THB/USD and exchange rate for material B is 25 THB/USD. FYI i use exchange rate type m. How can this happen?? How can each material have different exchange rate although its transaction at the same posting date??
I'm waiting your advice.. Maximum point will be given.
Best regard,
Yudha

I think its a bit misleading...The requirement is to post an Invoice with a base taxable amount of Exchange Rate A and a tax amount of Exchange Rate B. The Base Currency is JPY and the System Currency is SGD. So the Report S_ALR_87012357 should see the amount in SGD there. The Issue is caused by the different exchange rate on the tax amount submitted by the Vendor Invoice.
Example: Vendor Invoice Amount: 926,413.00 JPY, then we created PO to Invoice with Base Currency JPYalso amounted 926,413.00 JPY. However, in the Vendor Invoice Amount, the Tax Chargeable is 923.00 SGD (based on their exchange rate 65.66 JPY per SGD). But our Exchange Rate (System Rate) is 63.49 JPY per SGD. How can we reflect the Tax Amount as 65.66 JPY but still the correct SGD amount is based on the Vendor Original Invoice Exchange Rate 65.66 and not the System Exchange Rate, 63.49 in the same Invoice Creation (MIRO)?

Fraudulent digital certificates issued for high-value websites, iOS patch ?

http://www.zdnet.com/blog/security/microsoft-warns-fraudulent-digital-certificat es-issued-for-high-value-websites/8488?tag=nl.e589
http://www.h-online.com/security/news/item/SSL-meltdown-forces-browser-developer s-to-update-1213358.html
this obviously means that iOS could be vulnerable. Mozilla has patched Firefox (all versions), MS just pushed an update, Google patched Chrome already a few days ago, how about Safari and iOS?
edit: does iOS use OSCP validation?

I see Safari desktop supports OCSP checking - if manually activated - but does Safari mobile too? as there's hardly any setting available for Safari on idevices it's hard to know...

Output Issue for order confirmation

We have a sales order contains 3 line items 10,20 & 30.
We have found the line item 30 has been created in the sales order change log,. after the line items 10 and 20 has created.
The print output copy is having 4 pages.
In that print preview the header data was appearing for item 10 on page 1 and the same header data was re-appearing for item 30 on page 3.
For better understanding we have taken the generated spool files of the sales order and compared with the print output copies which was sent by the user.
Also we found that all the header details ( sold-t0 & ship-to addresses ) are generating in the SAP spool file for all the 3 line items 10,20 & 30. Here the output is z output type.
But the header details are printing in the PDF ( print output ) for line item 10 and 30 only. ( Not printing for item 20 ).
As per the SAP print program, whatever layout is generated in SAP, same thing should print in PDF
So as we assume that there is some mismatch in the layout mapping. ( here the layout is JETFORM Server )
But we are not sure about the problem ?
Please help me on this ...

Hi,
This can be due to various problems,
First check if there is any bug in the program itself. have a walkthrough. Once this is ensured, process one document in debugging mode for similar scenario and then check the spool.
You can convert the spool into PDF using your own program and then use the same spool for PDF conversion using some SAP programs like RSTXPDF4 etc. If there is an issue with your program, you can find out using these cases.
Also, there can also be problems which are printer specific. I would suggest you to test in different printers. Then only you can decide if ABAPer needs to fix it or you need a BASIS guy.

Unplanned goods issue for order

Hi,
W
Hi,
When I am trying to issue an unplanned component through migo (movement TYPE 261,A07 Goods issue,R10 other)
I am getting error "enter reservation number".As its an unplanned material how can i enter a reservation no for the same?
Regards
ebin

Hi Maheswaran,
I am using 26i movement type and enetering the order no also.
But system is asking the reservation no.Since its not planned at all there is no reservation for that.SO how can I tackle that?
Ebin

Missing response message in Idoc - WS scenario

Hello
I 'm missing a response message in the follwing scenario:
Idoc-> XI -> Web service (SOAP)
A Matmas idoc is sent from R/3 to XI. In XI the Idoc is
mapped to a SOAP message and sent to a web service.
The Message Interface for the SOAP call is synchronous
and has a PushMaterialSoapOut and a PushMaterialSoapIn
messsage, which is defined in the WSDL from the
web service and imported into XI Repository.
Everything is working fine but I do not get the response
message. The web service has sent the response message. I
have traced the firewall logs and i have seen the
response.
What is wrong? Is it basically possible to have a
scenario like this?
The message must have arrived somewhere, since the web
server does not throw an exception. But where is it?
Thank you in advance
Thomas

Hello Stefan
>Scenarios with IDOCs are always async. Therefore you
>cannot have a response.
Ok, so I have to use BPM.
>How do you want to process the response? What should
>happen in the sender system?
I was thinking about an ALEAUD idoc which is sent back
to R/3. Therefor I have created an synchronous message
interface with the MATMAS idoc as outgoing message and an
ALEAUD as incoming message. Accordingly I have a message
mapping for the response message.
An other reaction to the response message could be to set
the message to status failed. But this is the next issue.
>In some scenarios you might use a BAPI instead of an
>IDOC for synchronous message processing, but this
>depends of many circumstance depending ofyour business
>requirement.
The process in SAP R/3 is fixed. To move to BAPI is not
an option.
Regards
Thomas

Internal order - Error - Different logical system for order

Hello all,
I try to send IDoc (INTERNAL_ORDER) from system A to system B.
I have done:
- BD64 / WE20 / WE21
But after having customizing I have got following error:
Different logical system for order xxxxxx
Message no. 2075ALE001
Diagnosis
Internal order xxxxxxx already exists in system B. Its master system B is different from the master system A of the new internal order to be distributed with the same order number xxxxxxx.
System Response
Internal order xxxxxxx with master system A cannot be distributed in system B.
Procedure
Check customizing for ALE for internal orders.
How to solve this?
My aim is to maintain internal order master data in test system.
Thanks for your help.
David

I have found something.
If I change in table AUFK, logical from empty to A (master) and I run IDOC then IDOC has been correctly integrated.
Then: how to define "master"?

SOAP sender Adapter - response message missing in adapter engine level

Hi,
We have a synchronous scenario SOAP<-> P I <--->Proxy .Request comes from web service get the response from ECC.
Issue reported that response message not reached the web service .
I am able to see the request & response messages in SXMB_MONI. To check the status in message monitoring through RWB synch message are not existing more than a day.
Is there any possibility of failure of messages at adapter engine level in this case? If so How can I get error log?
what are the settings required to make the synchronous messages available in RWB?
Thanks in advance,
Regards,
Kartikeya

what are the settings required to make the synchronous messages available in RWB?
Set messaging.syncMessageRemover.removeBody = false in NWA / Visual Admin. Have a look at the below link for details -
/people/william.li/blog/2008/02/07/display-adapter-synchronous-message-content-in-rwb-of-pi-71
Regards,
TK

How to send response message from Java mapping class? Please help!

Hi Experts,
I have a sync scenario
          -Req--> -
>
SOAP           XI       RFC
          <Res--     <-----
The Req message contains:
<Order>
       <Orderid>100</Orderid>
       <Desc>Extrenal Order</Desc>
       <Qty>2500</Qty>
</Order>
Response message is:
<Log>
     <LogTxt>Qty value cannot be more than 3 chars</LogTxt>
</Log>
In the XI I have to validate the input request message using a schema. For this I am writing a java mapping program using aii_map_api.jar.
My requirement is that If the input message schema validation fails then I want to send a response message back to sender.
How can I send a response message back to the sender in java mapping program?
Kindly help with sample code example.
Thanks
Gopal

Hi,
First, I think PI 7.1 has this functionality and perhaps it comes in a SP for PI 7.0 and XI 3.0. So first have a look at that before creating custom development.
Second, if you use the java mapping, you will only have access to a request or response message. I would advise using a custom java module in the module processor and insert this message in the sender communication channel. This will allow you to validate request and send a response.
Regards,
Yaghya

ALE issue:No partner profiles (message control) maintained

Hi,gurus:
My ALE scenario is tranferring PO from client 800 to 900 client.
Now the logical system,partner profile，port，rfc，distribution model are created both the sender and receiver side.
In ME21N->MESSAGE, the output type is NEU,and medium is A,partner function is LS,partner is ECCCLNT900.
When I saved the PO,the status is red,and no idoc was generated.
I viewed the processing log,the information is: No partner profiles (message control) maintained.
But my distribution model is sender:ECCCLNT800;receiver:ECCCLNT900;MESSAGE：ORDERS;
The partner profile is ECCCLNT900(LS),and the outbound parameters are ORDERS,SYNCH. For ORDERS,the message control is EF,NEU,ME10.
Have you ever met this issue?
Thanks in advance.

Hi Li,
Please refer this threads...
Re: Message is not proposing automatically
Re: IDoc was saved but cannot or should not be sent
Hope you have to post this thread in ABAP General category..
Regards,
kumar.

JDBC- RFC- JDBC Synchronous scenario (Can't see the response message)

Hello Experts,
I tried this step in creating a synchronous scenario by using steps found in this site -> [http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29|http://wiki.sdn.sap.com/wiki/display/XI/File-RFC-File%28Without%20BPM%29] I just changes File to JDBC. But problem is I see the sent XML message in SXMB_MONI but to response message. I also can't see the Sender interface name for the response message when I tried to use F4 in the Interface Name portion.
Do someone encountered this before? Please help
Regards,
Alfred

Hello,
I hope someone could guide me on how to set this up cause I only see the sent message but there's no response message in SXMB_MONI. Note that interface was successful, I just want to see what was sent by the response.
Regards,
Alfred

Request Message field to Response Message

Hi Everyone,
I have a synchcronous scenario, where I have a special requirement that I want to append a Request Message Field in Response Message Structure while sending response to Sender.
Could someone suggest me probable solution, I have come up with using Value mapping table, but I am restricted to use a proxy for dynamic updates to the table??
Regards,
Nipun

Hello,
I have a synchcronous scenario, where I have a special requirement that I want to append a Request Message Field in Response Message Structure while sending response to Sender.
Perhaps the easiest would to to try to ask the endpoint to modify the response such that it contains the request. Otherwise, you can use a logic such as saving into a table and then retrieve the values for the response message mapping.
Hope this helps,
Mark

Certificate Issuer

Hello everyone,
I am attempting to setup an enterprise network with a HTTPS Inspection proxy. I have installed the certificate (that the proxy is using to issue other certificates) onto the Macs that are in the network (using keychain) and set the permisions to "always trust". From what I have been reading this is all that I would need to do (http://www.techrepublic.com/blog/mac/managing-ssl-certificate-authorities-on-os- x/314).
However when I enable the policy on the proxy server to intercept the SSL connections I get the following issue in Safari: "This certificate has an invalid issuer" (see attachment).
Does anyone have any ideas on how to fix this? or what I may have done wrong?
Ashley

I did two URL mappings similar as below.
Regular Mapping
==============
http://proxy.buyer.com
https://origin.buyer.com (example)
Reverse Mapping
==============
https://origin.buyer.com
http://proxy.buyer.com
I have downloaded the CA root certificate from https://origin.buyer.com and installed it to Netscape under the alias name "proxy".
However when I typed the URL http://proxy.buyer.com on my browser, it returned an error page to me and on the iPlanet error log, it said "The certificate issuer for this server is not recongnized by Netscape.......Netscape is refused to connect to this server".

Certificate issue for order response messages to Tradeplace

Similar Messages

Maybe you are looking for