Certificate of volatility for ML530
I need to find a certificate of volatility (COV) for the ProLiant ML530. Have found COVs for a lot of other HP equipment on the HP website but none for the ML530. Does anyone out there know where I can find a copy?
Hi:
You may also want to post your question on the HP Business Support Forum -- ML Servers section.
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.U3UKyOlOW9I
Similar Messages
-
Letter of volatility for PXIe-1071
I'm looking for a Letter (certificate) of Volatility for the following, please:
PXIe-1071
PXIe-8135
PXIe-8234Hey,
This is the type of request that would be better suited for an official service request via our support system. Since there was a nearly identical request submitted recently, I am going to assume that it pertains to the same incident and handle it via that channel.
Matt W.
Applications Engineer
National Instruments -
Does Cisco still provide Letters or certificates of Volatility
Does Cisco still provide Letters or certificates of Volatility?
I am currently documenting a deliverable system that utilizes both Cisco Catalyst 3560’s (WS-C3560-24TS-E ) and Catalyst Express CE-500’s (WS-CE500-24TT). I am looking for letters or Certificates of Volatility for both of these items as part of an Information Assurance package.
Are they available through Cisco?
Thanks
john
John K Klein, CISSP, IAM
HARRIS GCSD EIT
IT Systems & Security Engineer
MCSE, MCSA, CCNA, Security Plus, ITIL
4619 Foreign Trade Zone Blvd.
Colorado Springs, CO 80925
Office: (719) 472-3211
Pager: (888) 609-5106
Mobile: (719) 640-5738
[email protected]
[email protected]I think this is mentioned in the release notes; did you check the following section?
http://www.cisco.com/en/US/docs/security/nac/appliance/release_notes/48/48rn.html#wp1105597
Regards
Farrukh -
SF200-48 series certificate of volatility
Greetings Folks,
Does anyone know where to find a certificate of volatility for an SF200-48 switch? More specifically, I need data which clearly states what volatile and/or non-volatile memory the device has, whether or not the memory is user-modifiable, and a procedure for clearing all memory on the device.
Most of the time these devices simply require a power cycle to clear sensitive data but every now and then there is a technical process to do so.
Thanks in advance for your input!Sean, could you email me a sample certificate at [email protected] ?
I'd like to try to reproduce in a lab to see how my switches behave.
-Tom
Please mark answered for helpful posts -
The maintenance certificate is visible for a system in the SAP Supportporta
Hi Guys,
We are using automatic distribution of maintenance certificates by SAP Solution Manager.
We are ok with prerequisites ( back. jobs , system data , SDCCN jobs etc.) but maintenance certificate is not being applied to the satellite systems.
report RAGS_MK_DISPLAY_FILE does not list down systems and neighter I can see maintenance cert. in SAP support portal.
Can somebody provide hint.
Best Regards,
Tushar>
TusharC Chavan wrote:
> We are using automatic distribution of maintenance certificates by SAP Solution Manager.
>
> We are ok with prerequisites ( back. jobs , system data , SDCCN jobs etc.) but maintenance certificate is not being applied to the satellite systems.
>
> report RAGS_MK_DISPLAY_FILE does not list down systems and neighter I can see maintenance cert. in SAP support portal.
Hi Tushar,
Have you already checked this SAP Note with hints for trouble shooting?
[SAP Note 1280664 - Distribution of maintenance certificates: Troubleshooting|https://service.sap.com/sap/support/notes/1280664]
General information: http://www.service.sap.com/maintenancecertificate
Report RAGS_MK_DISPLAY_FILE and SAP Support Portal does not show any entries
==> That means, SolMan has not requested successfully Maintenance Certificates.
Hints for trouble shooting:
- check log of job REFRESH_ADMIN_DATA_FROM_SUPPORT
- check whether these SAP Note have been already applied. Both SAP Notes are linked in troubleshooting note.
1293657 - Error in distribution of Maintenance Certificates via SDCCN
1251060 - Error in requirement process of maintenance certificate
Good luck and best regards,
Ruediger -
Facing problem in installing certificate on Weblogic for the SSL
I am doing the setup for secure socket layer(SSL) in weblogic server
.I
have created the certificate which need for ssl by using the Openssl ,
after
that I entered path for all the file relate to setup by using the
weblogic
console. Once I have complete all this entries, I restarted the server ,
at
the time of restart its giving the following error. I am also sending
the
screen short of console and the log files as an attachment.
<Feb 4, 2002 4:45:46 PM GMT-05:00> <Alert> <WebLogicServer> <Security
configuration problem with certificat
e file config/cauvery-key.pem, java.io.EOFException>
java.io.EOFException
at weblogic.security.Utils.inputByte(Utils.java:133)
at
weblogic.security.ASN1.ASN1Header.inputTag(ASN1Header.java:125)
at weblogic.security.ASN1.ASN1Header.input(ASN1Header.java:119)
at weblogic.security.RSAPrivateKey.input(RSAPrivateKey.java:119)
at weblogic.security.RSAPrivateKey.<init>(RSAPrivateKey.java:91)
at
weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:397)
at
weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:300)
at
weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1039)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:475)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
<Feb 4, 2002 4:45:58 PM GMT-05:00> <Notice> <Management> <Starting
discovery
of Managed Server... This feat
Please help us to solve this problemHi.
Try posting this question in the security newsgroup.
Thanks,
Michael
Ankur wrote:
I am doing the setup for secure socket layer(SSL) in weblogic server
I
have created the certificate which need for ssl by using the Openssl ,
after
that I entered path for all the file relate to setup by using the
weblogic
console. Once I have complete all this entries, I restarted the server ,
at
the time of restart its giving the following error. I am also sending
the
screen short of console and the log files as an attachment.
<Feb 4, 2002 4:45:46 PM GMT-05:00> <Alert> <WebLogicServer> <Security
configuration problem with certificat
e file config/cauvery-key.pem, java.io.EOFException>
java.io.EOFException
at weblogic.security.Utils.inputByte(Utils.java:133)
at
weblogic.security.ASN1.ASN1Header.inputTag(ASN1Header.java:125)
at weblogic.security.ASN1.ASN1Header.input(ASN1Header.java:119)
at weblogic.security.RSAPrivateKey.input(RSAPrivateKey.java:119)
at weblogic.security.RSAPrivateKey.<init>(RSAPrivateKey.java:91)
at
weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:397)
at
weblogic.t3.srvr.SSLListenThread.<init>(SSLListenThread.java:300)
at
weblogic.t3.srvr.T3Srvr.initializeListenThreads(T3Srvr.java:1039)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:475)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:197)
at weblogic.Server.main(Server.java:35)
<Feb 4, 2002 4:45:58 PM GMT-05:00> <Notice> <Management> <Starting
discovery
of Managed Server... This feat
Please help us to solve this problem--
Michael Young
Developer Relations Engineer
BEA Support -
How many certificate in needed for push notification please tell me all steps ?
how many certificate in needed for push notification please tell me all steps ?
Your System Details shows;
Installed Plug-ins
Garmin Communicator Plug-In 4.0.4.0
Garmin Communicator Plug-In 4.0.3.0
Having more than one version of a program may cause issues. -
Need a Statement of Volatility for HP Switch JE006A
Need a Statement of Volatility for HP Switch JE006A
Hi:
This is a consumer to consumer forum.
HP only monitors this forum for compliance with the forum rules of conduct.
I recommend you post your question on the HP Business support forum -- Switching section (maybe an end user there knows how you get what you need), or call HP technical support for the country you live in to obtain the info you need.
http://h30499.www3.hp.com/t5/Switching-and-Routing/ct-p/switching -
Hello,
I am in need of Letters of Volatility for the following PXI components.
- PXI-8431/8
- PXI-2503
- PXI-4065
Thanks in advanceHello RFdigit,
You have not been able to locate it online because National Instruments reserves control over this document. With your permission, post an update on the forum so I can send you an email containing this information.
Best regards,
Ali M
Applications Engineer
National Instruments -
Letter of volatility for PXI-2568
Hi,
I woud like to find a letter of volatility for PXI-2568; it is a relay module with, what it appears to me, some logic circuitry on the output. I have searched both the forums and NI's main website without any luck. Can someone here provide the documentation needed? I would very much appreciate it.Hello RFdigit,
You have not been able to locate it online because National Instruments reserves control over this document. With your permission, post an update on the forum so I can send you an email containing this information.
Best regards,
Ali M
Applications Engineer
National Instruments -
QC51:No certificate is required for the purchase order item
Dear all.
I want to create an certificate Receipt In the T-CODE QC51.After input the purchase order and item and press return,the SAP show an error message:
No certificate is required for the purchase order item.
Message no. QC508
My question was where to control the purchase order item to require certificate or not?
Regard
YodaHi
For this you have to maintain Certificate req in Material master.
MM01>Enter your material->Quality view-->Tick on QM procurement->Certificate require-Mension kind of certificate req.
like
E21 Cert. of conformity "2.1" EN 10204
E22 Test certif. "2.2" EN 10204
E23 Works test certif. "2.3" EN 10204
E31A Insp. certificate "3.1.A" EN 10204
E31B Insp. certificate "3.1.B" EN 10204
E31C Insp. certificate "3.1.C" EN 10204
E32 Inspection report "3.2" EN 10204
Q001 Conformance Report
Q002 Plating Certificate
Q003 Test Report
Q004 Certificate through Web
Q005 Chemical / Physical Test report + QC
etc.....
Customizing for this can be done in
SPRO->Quality Management->QM in Logistics--->Define Keys for Certificate Processing.
This will ask you during MIGO or during UD/confirmation possible thro' QC21
Regards
Sujit S Gujar -
I just recieved this message when trying to email a itunes gift certificate, "This purchase would exceed the maximum Gift Certificate purchase amount for this Apple ID".Why I am limited to gift certificate and not other purchases.?
Chris CA, 62,910 points. Dang...that's a lot of support. Before I start, let me say Thank You! You need to answer a lot of people's questions to achieve that.
1) You slightly misunderstood my letter through no fault of your own. It was a generic compilation of information submitted by members of this discussion turned into a letter by me for use on the Apple Feedback site. I myself did not receive an e-mail. I actually was prevented from purchasing any more iTunes gift cards at a certain point and was given a cryptic response from the iTunes store that my request could not be processed. It was only after investigation on my part that I found out the reason was the $100 max per 30 day rule. I'd try to find where in the Apple's support site I did find that information...but, well, you are just going to have to trust me. However, others in this discussion stated they received the information in an e-mail. I used that fact in my letter as it seemed to create a less "cumbersome" feedback submission.
2) "Why look for iOS apps?" That's a good very good question! I miswrote. I should have said "OS X apps." That is where iTunes is located on the Feedback Site. Good catch. As you know (62,910 points is a lot of "knowing"), when you submit feedback you must click on the item of which you are going to write. I must be so ramped up for the impending release of the new iPhone that I had iOS on the brain. My bad. :-)
3) In all the time this discussion has been alive (over a year), and in all my googling, I never read about an option to contact iTunes support and ask them to remove this limit from my account. It is too bad you didn't come to this discussion when it started in May of 2011 to offer that piece of advice! Surprisingly, that information wasn't anywhere on the Apple site where I read about the $100/30 day limit. Maybe it is there now. But, it sure wasn't there when I read it. It would have been very helpful.
4) You say "(which they can do and often have done for many people here)." I am curious, what do you mean by "here." Not "here" as in "here in THIS discussion forum." Right? I don't see anyone in this discussion aware of that information and posting it for others to read. By "here" I assume you mean the ENTIRE Apple Support Community. Unfortunately, until you arrived on the scene, none of those from that gigantic "here" came across THIS discussion to share their good fortune and knowledge about removing the $100 limit on iTunes gift card purchases per 30 days.
Well, I think that wraps it up for another day. I am off to iTunes support to get this limit removed from my account.
Adios amigos!
Mr. Luigi -
I am getting the event (below) every day on a new 2008 domain controller that I brought up recently. The DC has a domain controller certificate, that was automatically issued by an online enterprise CA. This CA is located in another domain (child domain) within the same forest. The 2008 DC is in the top-lvel domain. None of the other domain controllers , which are 2003, are reporting this message. I ran certutil.exe, and it successfully verifies all domain controller certificates, including the certificate on my new 2008 DC. Any ideas why these messages continue to appear?
The Key Distribution Center (KDC) cannot find a suitable certificate to use for smart card logons, or the KDC certificate could not be verified. Smart card logon may not function correctly if this problem is not resolved. To correct this problem, either verify the existing KDC certificate using certutil.exe or enroll for a new KDC certificate.Hi,
I have checked the file. Here is my findings:
1. The computer name of the domain controllers are different in this dcinfo.txt file. There is no Swampoak. I would like to confirm which one is Windows Server 2008 domain controller.
2. The domain controller Buckeye and Madrone both have 2 KDC certificates, one is expired and the other one is valid:
*** Testing DC[0]: MADRONE
** KDC Certificates for DC MADRONE
Certificate 0: -à Valid
Serial Number: 116bbdd90000000000b6
Issuer: ***
NotBefore: 12/15/2008 2:28 AM
NotAfter: 12/15/2009 2:28 AM
Subject: CN=madrone.****
Certificate Template Name (Certificate Type): DomainController
Non-root Certificate
Template: DomainController, Domain Controller
Certificate 1: --à Expired
Serial Number: 15c2f00b000000000028
Issuer: ****
NotBefore: 3/9/2007 3:05 PM
NotAfter: 3/8/2008 3:05 PM
Subject: EMPTY (DNS Name=madrone.****)
Non-root Certificate
Template: DomainControllerAuthentication, Domain Controller Authentication
*** Testing DC[1]: BUCKEYE
** KDC Certificates for DC BUCKEYE
Certificate 0: -à Expired
Serial Number: 15c4ddc2000000000029
Issuer: *****
NotBefore: 3/9/2007 3:07 PM
NotAfter: 3/8/2008 3:07 PM
Subject: EMPTY (DNS Name=buckeye.****)
Non-root Certificate
Template: DomainControllerAuthentication, Domain Controller Authentication
Certificate 1: -à Valid
Serial Number: 115f34ec0000000000b4
Issuer: ****
NotBefore: 12/15/2008 2:15 AM
NotAfter: 12/15/2009 2:15 AM
Subject: CN=buckeye.****
Certificate Template Name (Certificate Type): DomainController
Non-root Certificate
Template: DomainController, Domain Controller
Suggestion:
1. Please delete the expired certificate and then reboot the domain controller and test the issue again.
2. If the issue persists, please request a new Domain Controller Authentication certificate on the domian controller and check the result. -
This Certificate not valid for the selected purpose
I have installed on my Windows 7 (64 bit Professional w/SP1)
a Self-Signed CA (IDS_MstrCert) that has been accepted by the system certificate "store". via mmc & certmgr
I generated this CA on my Redhat Linux 7 server using the openssl utilities.
It shows: This certificate is intended for the following purpose(s):
All issuance policies
All application policies
It is enabled for ALL purposes (However I did not generate with ALL purpose set)
Under Certification Path:
Certificate Status: This Certificate is OK
I have also installed a Client Certificate (winxclient) (also generated by my Redhat Linux 7 server)
That has been "signed" by my CA (IDS_MstrCert)
I added it successfully to the system certificate "store" via mmc & certmgr.
However when I open the certificate I see the following message: This Certificate not valid for the selected purpose
When I view the Certificate path I see the following:
IDS_CA (friendly name for the CA)
|-----> VPNIKEv2cli (friendly name for the client certificate)
Certificate Status: This certificate is OK
In the Intended Purposes field: ServerAuthentication, ClientAuthentication
How do I resolve this problem ? This Certificate not valid for the selected purpose
When I attempt my vpn/ikev2 connection (using machine certificates) I get the 13806 error.
Best Regards
Guy RichHi,
In my opinion, this is not Windows system problem. You need to make troubleshoot with the Certificate.
I made a research with this error message, the link below might be helpful:
http://support.persits.com/show.asp?code=PS030304105
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Can I install ssl certificates in Firefox for android 4.0 tablets?
I need to Know if I can install ssl certificates in Firefox for android 4.0 tablets?
I did it with the laptop Firefox for windows 7 and I am using al time but I need to travel with my samsung tablet and use my ssl certificate to acces my bank account. I dont know if the android version of firefox have advance options to configure my certificate.Visit a website that provides the cert and then you should be prompted to install it. As of right now the feature is in Firefox Beta from the Play Store if you want a more polished version.
Maybe you are looking for
-
Need to add a new row at the end of the table
Experts, working jdev 11.1.1.3.0 i am adding row programetically, my requirement need to add the row at after last row. i tried different ways. Row newLastRow = getPWBBidLaneVO().last(); int lastRowIndex = getPWBBidLaneVO().getRangeIndexOf(newLastRow
-
Good morning, I would like to know, if there is any "user-friendly" way to count the number of attachment present inside of PDF file. Is there any function that already can do this? If not, wich approach would you kindly recommend me? Thanks a lot fo
-
When viewing the weather default app with multiple cities, how come there isn't a one click shortcut to go back to the first city?
-
So... I have just got my hands on a Power Mac G5. It came without a hard drive, I have put a new one in. It seams to be working all fine, however it has no OS. I have a Power Mac G5 install disc with 10.3.7 on but when I put it in it just spits it ou
-
Scroll up and down through apps (grid view) rather than side to side?
Is there a way to scroll through your apps up and down instead of side by side while in grid view (not list view)?