Certificate Profile default values

Is there a way to default values when adding a new Master Insp. Characteristic when creating a Cert Profile? For example, if I want to default:
Category=1 Master inspection characteristic
Plant=QM00
Result Selection Level=1 Summary
Add Text when not ok=1 If outside specification

Hi Julie,
There is no option in SAP for creating the default values in the certificate profile. We can either try using the exits like QMSD0001 or just copying the earlier created characteristics.
Kindly ask me if you need any other details.
Thanks & Regards,
Srinivas.D

Similar Messages

Change documents for default values in user profiles

Dear Experts,
Please let me know if there are any tables to find the changes that have been made to the default values in a user profile.
Regards,
Lakshmi.

Hi,
as the defaults are not considered as critical, changes are not recorded in change documents.
b.rgds, Bernhard

Oracle profile - IDLE_TIME DEFAULT - value ?

Friends
How can I determine the value of DEFAULT for the IDLE_TIME in Oracle profile.
CREATE PROFILE DEFAULT LIMIT
idle_time <value | UNLIMITED | DEFAULT>
Thanks
Vishal V.

Ok, I found it.
"Default" profile has default values.
Thanks
Vishal

How to set default value for Zfeild using statusprofile

hi experts,
I need to set a default value for a zfeild using status profile.Although we can default the values,using getter and setter methods,but in my requirement,the feild will be defaulted when the page is locked,also in display mode,which will require me to write code to unlock then set the value and then write a commit,as there wont be any user action performed.
I have created a zstatus profile and have set the required status to inital,but no luck
please suggest if this canbe achived through status profile.
Regards
Anu.

Hi,
You can check in the getter if the Page is locked and then display the value to want to display. Note that this will be just Displaying the default value for the Zfield and it will not set the default value into the Zfield in DB, because when the document is locked ( means locked for editing - mostly when system status is completed ) , setters are not called and so you can display the value but cant set it. This is fine if the value you want to display in Z field is just for user's informations and its not required to save this default value.
The best approach would be to set the value in the Zfield before the page is locking. For example, If you wat to set the zfield value when status is set to "Completed" , then you can configure an action that is 1) triggered during saving of the document with 2) start condition "When status is completed" ( both 1 and 2 you can mention in action defination ), then Implement this action badi in which you can set the Zfield to default value.
This will ensure that default value is always set whenever the page is getting locked for editing ( i assumed that page lock means status completed ).
Thanks & Regards
Suchita

How to Set Default Value in DFF

Hi Experts
I have a requirement to Default the DFF field value as No on Iprocurement Requistion Headers Page.
I followed the below steps to enable the field. Please help me where can we set the initial value as NO.
Please help me how to set the default value as No and we would aslo want to give flexibility to the user to change it to Yes if they want to.
Any Help would be greatly appreciated.
http://oraclerocks.blogspot.com/2008/04/adding-dffs-to-oaf-pages.html
Add DFF to iProcurement Requisition header in the same way. Define a DFF again:
1. Create a new Value Set.
2. Define Values for the value set created in step 1.
3. Add Value Set to the Flex Field Segment in Application: Purchasing and Title: ReqExpress Headers.
4. Freeze and Compile the FlexField definition.
The steps to enable DFF in IP HTML pages are as follows:
1. Enable profile Personalize Self-Service Defn to yes at the user level
2. Log in to iProcurement
3. Go to Checkout: Requisition Information page
4. Click Personalize Page at the top of the page
5. Look for Flex: (ReqHeaderDFF)
6. Click Edit (Pencil)
7. Change Rendered from false to true8. Click Apply
9. Click Return to Application
Regards
Krishna

Hi Gaurav
Thanks for your quick reply. I did a different solution just by adding value set with Pop List and attached to DFF segment. The value set that I created is for single value saying Yes. So on the page by default it will display NULL. If user want to select a value then they will select Yes from the pop list. On that same region I created TIP and left a note.
I will follow the approach that you mentioned, for my future extensions. Thank you for your help again.
Regards
Krishna

How can I get the default value of a particular preference programatically. I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.

<blockquote>Locked by Moderator as a duplicate/re-post.
Please continue the discussion in this thread: [tiki-view_forum_thread.php?comments_parentId=702631&forumId=1]
Thanks - c</blockquote>
== Issue
==
I have a problem with my bookmarks, cookies, history or settings
== Description
==
How can I get the default value of a particular preference in FireFox?.
I know I can see the default value for some of the preferences in about:config but, I need a programatic way to get the default value.
I see some that there are values for preferences in firefox.cs but I am not certain that these are being used as the default values for preferences. prefs.js in user's profile only has the updated values and not the default values.
Any help towards acheiving this programtically is greatly appreciated.
If the default values are stored in a file, kindly let me know the format in which it is stored for me to parse it programatically.
== User Agent
==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Win64; x64; Trident/4.0; .NET CLR 2.0.50727; SLCC2; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

Dear Friend,
Here when you have the callableSattement as ?=proc(?), the first ? is an output parameter. So you should register it as out parameter using registeroutparameter.
Then you can get the value from the outparameter using callablestatement.getXXX().
Try that way.
For free tral versions of JDBC Drivers go to www.Atinav.com

Assigning a default value to a user property

Hi everyone,
do you know how can I assign a default value to a user property? It would be great if I should be able to assign it from the administration without writing any code (like profile web services...).
Thank you!
Alberto Marchiaro

Hi Alberto,
I don't think you can currently do this. In other words you can't set a default value for some object property and have it subbed in when no better value is available.
You can however create a default profile, and set values for the object properties assigned to users (You do this by going to the "Default Profiles" manager). You can then edit the "Default Profile" that is already there (or create a new one), and edit the "Properties and Names". Set the value field to whatever you'd like to be copied by default.
Once done, all new users that are created via a User Synchronization job will have this default profile. The changes will not apply to users that were previously created. If you created a new Default Profile in the Default Profiles Manager, then you need to goto the Authentication Source that you are doing your sync's from and pick which profile you'd like to use for All Groups. You can also create custom Default Profiles for various groups.
Hope this helps,
Akash

Defaulting values in material master creation

Hi,
I want to have some filed values to be appeared as default in all the views while creation of material master.
By user settings, I can restrict Org level values such as C Code,S Org Distribution Channel etc etc.
But how to make field values such as account assignment grop,division,valuation class,price control,transport grp,loading grp etc appearing default so that user does not have to think.
Regards,
manOO

Hi,
You can set values for Parameter IDs of the fields that you want to default.
Set values in system -> user profile -> own data under parameters tab.
For example Disision's parameter id is 'SPA'. You can set a default value for division by giving proper value for SPA under parameters data in own data.
Hope this will help.
Regards,
Naveen.

Default values in CAT2

Hello All!
I'm configuring a data entry profile CATS for HR and CO. I'm using Infotype 315 for default values in CAT2 (activity type and cost centre), but when I enter the target hours in CAT2 the only field that get defaulted is A/A type. I have made the proper customization in tranzaction CAC1 (configuration of data entry profile) and I have entered data in 315.
Can you please help me?
Tks

Hi,
I hope you got his id. Anyway, his id is [email protected] Your query will end up with him. He is genious in CATS.
Meanwhile, you can find his connection from my ittoolbox profile.
http://ittoolbox.com/profiles/omprakash_hr
Let me know the status, once you posted your query to him. I will help you, if you couldn't catch him.
Good Luck.
Om.

Default values for long text for mic in inspection plan

hi,
Some long text are coming default when i am creating inpection plan for mic.
This is coming for only particular plant. For other plant it is not coming. Is there anywhere we can make it as default for a particualar line item . ie for particular characteristics i.e 10, 20 etc
sathish. R

Hi,
I am not sure , whether you are mentioning about Long text for MIC or Default insp char number (10,20,30..) in the insp plan.
If you are talking about Insp char number in the insp plan . you can specify the same in SPRO , QM->Q planning ->Insp planning -> General -> Maintain profiles for default values.
Regards
K.M.Arun

Set default value to a field in MM01

Hi Friends ,
            Can anyone tell me that how can set a default value to field "Rounding Value" in tab "MRP1" when i go to transaction "MM01" . I tried to search user exit/Badi for the same but i didn't get OR can say not able to find.
PLEASE HELP ME.
THANKS IN ADVANCE.
Kishor

In config, there is something called a rounding profile which I think will help you achieve what you want. Here is the path to the config task.
Implementation Guide for R/3 Customizing (IMG)
-->Logistics - General
   -->Quantity Optimizing and Allowed Logistics Units of Measure
      -->Maintain Rounding Profile
Here is the documentation related to that task.
<i>Maintain Rounding Profile
In this step you define rounding profiles for adjusting units of measure to match delivery or transport units.
Rounding profiles can be maintained on a general or plant-specific basis. General maintenance is recommended as this requires you to enter less data.
A distinction is made between static and dynamic rounding profiles.
A static rounding profile comprises the following:
Threshold value
Rounding value
The threshold value is the value from which the system rounds up to the next delivery quantity.
The rounding value is the value to which the system rounds up as soon as the threshold value has been reached.
Several combinations of threshold and rounding values can be defined for rounding profiles.
No logistics units of measure are taken into account with static rounding profiles. This means that the system rounds up statically to the rounding values entered in the profile and not to "full pallets", for example.
Dynamic rounding profiles comprise the following:
Rounding method
Rounding rule
Indicator to show that units of measure are to be condisered only if they are allowed for the vendor or recipient.
The rounding method controls how the system rounds off:
No rounding
Rounding to a multiple of the order or sales unit
Rounding to order or sales unit, and to logistics units
No rounding
You have to define an additional rounding rule if you want your profile to round off to whole logistics units. This rounding rule is the key used for grouping logistics units of measure. The group contains all the units to which the system can round off when using the profile.
You can also have the system include only those logistics units that are allowed for the vendor or recipient. Allowed units of measure are defined in unit of measure groups that can be used at material-vendor level or at material-plant level.
Example
a) Static rounding profile
A material has a base unit of measure of 1 piece. Purchases are made in cases (1 case = 5 pieces) or pallets (1 pallets = 8 cases or 40 pieces).
You maintain the static rounding profile as follows:
From To Rounded to
01 05 05
06 10 10
11 15 15
16 20 20
21 25 25
26 30 30
31 31 35
32 40 40
41 45 45
46 50 50
66 70 70
71 71 75
72 80 80
81 85 85
b) Dynamic rounding profile
To procure materials in lower price bands, you define rounding rules containing all pallets and cases that the relevant vendors can deliver. You enter a percentage for every pallet and case category that indicates the level to which a quantity is to be rounded up to the next unit of measure.
Rounding rule 01
Unit of measure Round up as of
Euro pallet 70% full
Pallet category 2 80% full
Case for euro pallet 65% full
Case category 2 75% full
You maintain a dynamic rounding profile using the rounding method "round to whole logistics units" and assign the profile rounding rule 01.
A material has a base unit of measure of 1 piece. Purchases are made in cases (1 case = 5 pieces) or pallets (1 pallet = 8 cases or 40 pieces). The system then rounds an order quantity of 68 pieces (= 40 + 28) to 2 Euro Pallets (= 80 pieces) because the second pallet is already 70% full.</i>
Hope this helps,
Srinivas

Default values for service provider in transaction TRIP

Hello Gurus...
We are implementing travel management and I have a problem... here's the scenario
Tha gl account that should be used for a specific trip recepit depends on the following:
The expense type
The company specific type of trip
The Employee grouping for Travel Management
What we have done so far is :
create a service provider for every combination of trip_type/employee_grouping
create entries in V_T706B4 for every valid combination of expense_type/service_provider
configure transfer to accounting
With this configuration the gl account is determined correctly. However this way of solving the situation means that the user must enter the service provider for every recepit entered in the expense report. Given that in our particular scenario the service provider depends on data that has been already entered (type of trip) or that "the system should know" (employee grouping), users are not happy about having to enter the service provider.
¿Is there a way to assign default values to the service provider, and would it be possible to code/configure somewhere how to set those default values? I tried doing it through the trip schema, but apparently it is not possible to set a default service provider that way. I also tried setting the values in the user exit (b4 assigning trip number) but this doesn't work since the user exit is called after the standard validation. I also tried implementing subroutine USER_EVAL_RECEIPT, but this doesn't seem to work in transaction TRIP.
Thanks in advance for any help you may provide!
Juan Ramon

Hello AP.
Thogh your suggestion is helpful (I might use profile parameters somewhere else) thre is no parameter for the field I need. In any case It wouldn't have solved the issue completely, since the default value I need depends on both the employee(user) and the type of trip that's selected.

Can you set default values for person/group picker fields? To current user?

Two-part question/issue . . .
Part 1:
In InfoPath 2013 in use with SharePoint 2013, how do you set a Default Value for Person/Group Picker fields? Other field types like Text Boxes have a Default Value section in the Data tab of Properties. There doesn't appear to be any equivalent for
the Person/Group Picker field type in Properties. I'd like to set a default person for a few fields in a form I've created. Is this possible?
Part 2:
The default user I want to set for one of those Person/Group fields is the "current user." I want a user to log into our SharePoint 2013 intranet, load a new form for edit/creation, and have one of the Person/Group fields in that form to
automatically populate this particular user. Is this possible?

Hi Stephen,
You can auto populate your InfoPath farm with current user Name and all other property that you have in your User profile, you have couple of options.
First you can make a secondary connection in your InfoPath form with user profile and can use the UserProfileService.asmx and call the GetUserProfileByName method. Here is the steps you can follow.
http://blogs.technet.com/b/anneste/archive/2011/11/02/how-to-create-an-infopath-form-to-auto-populate-data-in-sharepoint-2010.aspx
Secondly you can use JQuery and SPServices ,
$().SPServices.SPGetCurrentUser function to populate the values with script to achieve the same in this case you no need to use InfoPath form just create simple text type column in SharePoint
list and auto populate it with getting the current user Name from User Profile here is the scripts
<script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery-1.4.2.min.js"></script>
<script language="javascript" type="text/javascript" src="../../jQuery%20Libraries/jquery.SPServices-0.5.4.min.js"></script>
<script language="javascript" type="text/javascript">
$(document).ready(function() {
var userCurrentName = $().SPServices.SPGetCurrentUser({
fieldName: "CurrentUser"
$("input[Title='CurrentUser']").val(userCurrentName);
var userPhone = $().SPServices.SPGetCurrentUser({
fieldName: "WorkPhone"
$("input[Title='Phone']").val(userPhone);
</script>
Krishana Kumar http://www.mosstechnet-kk.com

I can't open downloaded files because other USER Profile defaults

I inherited a laptop using Vista, which has Firefox vs.27.0.1.
I set up a new user profile for Firefox, using my name.
When I download a file, it shows up in the download section (the arrow at the top right of the address bar)
When I click on it and open it...another Users information appears c:/USERS/ADAM/DESKTOP/DESKTOP
The file tries to open and then disappears.
How to I change my setup so that I can download AND open files without them being blocked by the original user?

Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

URM How to set default value in the "New Check-in" - "Folder" field

Hello everyone,
I'm trying to find out how to set the default value for the "folder" field in a check-in profile created using the Configuration Manager. If I browse to the folder in the "Browse Content -> Folders" menu and check-in a file inside the folder, it will fill this field automatically. I need to replicate this behavior using the "New Check-in" drop-down menu and selecting a profile, in other words, associate a Folder with a check-in profile.
I know it was possible to do so in previous versions using the folders_g component, but I'm unable to figure out how to accomplish it with the new FrameworkFolders component.
Any help is greatly appreciated.
Thank you.

Hello,
It is working fine try this.
PARAMETERS :
y_p_list TYPE char32 AS LISTBOX VISIBLE LENGTH 22
                              MODIF ID rsg. .
AT SELECTION-SCREEN ON VALUE-REQUEST FOR y_p_list.
MOVE: text-200 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-203 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-210 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-211 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-204 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-205 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-206 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-207 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
MOVE text-208 TO y_wa_listbox-field.
APPEND y_wa_listbox TO y_i_listbox.
CLEAR y_wa_listbox.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
    EXPORTING
      retfield        = 'FIELD'
      dynpprog        = sy-repid
      stepl           = 1
      value           = ' '
      value_org       = 'S'
      display         = ' '
    TABLES
      value_tab       = y_i_listbox[]
    EXCEPTIONS
      parameter_error = 1
      no_values_found = 2
      OTHERS          = 3.
IF sy-subrc <> 0.
ENDIF.
REFRESH y_i_listbox.

Certificate Profile default values

Similar Messages

Maybe you are looking for