Certificate profile table

Hi All,
Pl.tell me the table for certificate profile and materials assigned to it ,as i have to develope a report in which i want to pring MIC's for those materials only which is assigned to certificate profile only.
Thanks in advance

Hi
QCVK - Certificate profile header
QCVMT - Certificate profile characteristics level : Text
ZQCVM - Certificate profile characteristics level
QCVV - List of preliminary products
Thanks and regards
Murugesan

Similar Messages

  • Link between Material code, Customer & Certificate Profile (Quality)

    Hi All
    I develop one smart form for quality certificate.
    But I am not able to find out the link between Material, Customer & Certificate profile.
    In which table these all data are storing.
    On the basis of above condition MIC will print on Quality certificate.
    Regards
    ARK

    It should be posted in QM forum, isn't it?  Anyway, try this.
    First you get the profile schema in table T683 (configuration of profile schema in Quality Management -> Quality certificates -> Certification Profile -> Profile determination -> Define schema for profile determination).  Standard one is QC0001.
    Then you use function call V61I_CERT_PROFILE_FINDING with parameter (standard routine for finding certificate profile.  Unless you have the user exit, this routine should work):
    I_APPLICATION = QC
    I_DATE = current date or whatever date (i.e., delivery date in outbound delivery)
    I_DIALOG = leave blank
    I_HEADER_COMMUNICATION => here you can put in your customer, material, plant ; depend on your access sequence
    I_SCHEME = value from table T683
    You will get the output in table E_KONDI which give you data of condition rec. no, certification type, profile and version.
    Then you can use certification type, profile and version to select the characteristics from QCVM.
    Hope it helps.

  • QC Certificate Profile

    Dear QC Experts,
    We have created several QC certificate profiles in SAP R/3 currently and a requirement has come up to rename these profiles for easy end user identification. Is there any standard method of renaming the existing QC certificate profiles other than copying and deleting the old one?
    Suneeth

    Yes, you always need a certificate profile.  Usually you always use V2 (shipping).  The form you used, QM_QCERT_01 is only an example form that SAP provides.  It should be copied and must be adapted for your businss and you'll need a person knowledgable about SAPscript to make changes to it.  I  believe there is another for a COC (Certificate of compliance) which might be more what your looking for if you don't need to report batch values or inspection lot vales.
    Your probaly missing the certificate recipent record.  You'll find this under the QM area under Outgoing certificates.  You can try adding LQCA output type directly to the delivery in the item outputs.  (Any good SD person on site should be able to show you how to do this)
    To understand condition tables and procedures I would again turn to an SD person or a pricing person.  They use the condition technique a lot and should be able to explain it easilly.  They should also be able to help with setting up the output procedures and related items as well.
    Craig

  • Creating certificate profile

    Hi all,
    Please tell me what are the mandatory fields in the creation of profile ?
    what are the diff. config. settings?
    thnx

    Steps in IMG
    Certificate type can be crated for identification, hence you can crate type in img (Quality ManagementQuality CertificatesCertificate ProfileDefine Certificate Types)which you can assign a status profile if required.
    Define a form which you can use the std one
    Define Data Origin and Profile Determination u2013 this I think std can be used unless you want to defer  SAP std. This will help to choose a certificate profile incase if you have more than one for a particular combination
    Transaction
    In QC01 use the certificate type created and enter a name for profile.
    Give the name of form.
    Click on characteristics overview button and enter the details. and then the release the profile
    In QC15 assign the material to certificate.
    Try and come back

  • QM-How to add a New "Output Format" in Certificate Profile?

    Hello QM Functional Experts,
    Can any of you tell me how we can add a custom "Output Format" in the Certificate Profile (QC01/2/3). I tried the Configuration approach via QM-Quality Certificates-Certificate Profile-Define Data Origin. I do not see an option here to add a New Output Format.
    If this is posted in a wrong forum, I apologize. I am not able to find the correct forum for QM. Please redirect me and I will be glad to post it in the right forum.
    Thanks,
    Nagesh

    Hi,
    You can use the FM ..RV_MESSAGE_UPDATE..
    Thanks
    Naren

  • Change of unit in Certificate profile

    Dear Friends,
    I want to chane the unit of measurement in certificate profile from mg/kg to PPM, but system is showing error as
    "Unit mg/kg cannont be converted to unit PPM"
    Please giude, how to over come this error as I want to change the UOM in COA.
    Regards,
    Amit Shirsath.

    Hi Amit,
    It doesn't seem to be possible.
    May be you need to create another MIC and do the re-assignments.
    Regards,
    Arpit

  • Problem in certificate profile assignment during QC15

    Dear SAP Gurus,
    1.In Development server while assignment of certificate profile  we can see the combination of Material/Plant.
    2. In production server  while assignment of certificate profile  we cannot see the combination of Material/Plant.
    Can anybody please suggest the solution.
    Regards
    Debjeet

    we have only  three options
    1)material/customer
    2)material
    3)Material Group  where is Material/Plant option i conn't get

  • QM layout set QM_QCERT_01 for certificate profile

    Experts,
    I'm creating a certificate profile in QC01 and I want to assign form QM_QCERT_01 as a layout set. It's the standard SAP form for the quality certificate.
    But I get the error message: "Text QM_QCERT_OFF_SPEC_TEXT not available for layout set QM_QCERT_01" (Message no QC 094).
    Diagnosis: In the form QM_QCERT_01, a reference exists to text QM_QCERT_INSPECTION_METHOD (text ID ST, language EN). However, this text is not available in the current client. This may be due to one of the following reasons:
        o  The text is only available in the original client.
        o  The text is not available in either the original or the current client and should therefore be created.
    System Response: The text cannot be evaluated while the certificate is being created. Information and logical queries could be lost for this reason.
    Procedure: Check your entries in form QM_QCERT_01. If required, create the text QM_QCERT_INSPECTION_METHOD.
    If the text is only available in the original SAP client, copy it in all languages (if necessary) from the original client to the current client. To do this select Tools -> SAPscript -> Standard text -> Utilities -> Copy from client.
    How do I check if the text is available in the current client? How do I add or create the missing text?
    Thanks. Rgds

    If you are not sure then you can copy the std form and text in SPRO>QM->basic settings>
    Transfer QM Standard Texts  
    Transfer QM Forms.
    hence from 000 client this will be copied and then you can check it once again..if still problem persistis then it is sure that it is not available in std sytsme and you need to talk to ABAPer to cretae a text element  QM_QCERT_OFF_SPEC_TEXT .
    This may be created in your client and assigned to layout...just check

  • How to add profiles to critical roles & profiles table in GRC RAR

    Hello,
    As per Note# 1034117, it says Add "SAP_ALL" type security roles and the SAP profiles, see list below for profiles, to the Critical Roles and Critical Profiles table.
    SAP_ALL All Authorizations For The SAP System
    SAP_NEW All Authorizations For Newly Created Objects
    S_A.ADMIN Basis Operator
    How do we add the profiles, to the Critical Roles and Critical Profiles table in RAR.
    Thanks,

    Hi,
    I configured the critical roles & profiles in rule architect.
    But when I schedule the background job for batch risk analysis, it is taking all the users, roles & profiles.
    Is there a way to exclude users, roles & profiles? (I have already configured the excluded users, roles and profiles in exclude option), but still when I schedule the background job and say show parameter, it shows the User Range as '*'. It is not showing the excluded users.
    Can you please update how to exclude the list of users, from the batch risk analysis?
    Thanks,

  • Idoc/BAPI for Certificate Profile creation

    Hi,
    Is there any Idoc/Bapi available for Certificate Profile creation (Transaction Code  QC01).
    Appreciate your Inputs.
    Thanks.
    Regards,
    Pc

    BAPI_USER_PROFILES_ASSIGN  Change User-Profile Assignments
    SUSR_BAPI_USER_PROFILES_ASSIGN  Methods of object USER
    Edited by: Mahalakshmi Padmanaban on Feb 15, 2008 1:51 AM

  • Upload certificate profile (QC01) USING LSMW?

    Hi,
    is there any bapi/ standard method / ale/idoc for upload certificate profile (tcode qc01)?
    thanks,
    abaper

    Hi,
    Pls check this Link Re: Certificate Profile QC01
    Note : Quality certifiactes which is important for business,there are two types.
    Incoming Certificate - while performing incoming inspection against MIGO (Vendor PO),quality inspector/engineer should prepare the certificate,this scenario is called Incoming certificate.
    Outgoing Certificate - while performing Final inspection against Prod.order or Sale order delivery,quality inspector/engineer should prepare the certificate,this scenario is called outgoing certificate.
    Quality certificate profile is mandatory with characterstics values.
    Thanks & Regards

  • No certificate profile found

    Hi Everyone,
    I am trying to generate certificates when we do a post goods issue for an outbound delivery.
    When I go to vl03n and go to extras, delivery output, header; I see two entries one for LQCA and one for LQCB.  both have a red status and the processing log states that "No certificate profile was found".
    I used QC03 and did a search using assignment on the certificate profile field and entered the material number that is on the outbound delivery.
    the system pops up a window that shows that material assigned to a Cert. profile on 4/2/2008.  The outbound delivery is for 4/16/2008.
    Any idea what I should be looking for?
    Thanks,
    Mike

    Hi Mike,
    Please check the Validity Period of CErtificate Profile and assignment.
    You may create a new asssignment is QC15 for the combinations of Plant/Material etc.
    Thanks and regards
    Murugesan

  • Partner profile tables.

    Hi,
    We need to add new vendors to the partner profile tables. The user has given us the vendor number, agent code and company code.
    Which are the tables we need to update?
    Thanks in advance.
    Mick

    Hi,
    For your information, the data are stored in the following tables -
    KNVK - Customer Master Contact Partner  
    KNVP - Customer Master Partner Functions
    Hope this helps!

  • Changing Inspection characteristics of Certificate Profile

    Dear All,
    I copied one certificate profile from another certificate profile . Then i want to change the copied certificate profile . System not allowing adding at first characteristic it allowing to add at last . How can i add that specification as first .
    Regards
    Nandan.N

    When you add the new characteristic at the end, simply change the number on the far left to a value like 12 or 8.  When you save and come back in, it should be up where you want it.  you can delete the characteristic 10 but I don't beleive you can reuse the number until you archive data off the system as I believe it is marked for deletion and then not displayed but it still resides in the Datebase.
    You should be able however to update the characteristic in positon 10 to a new mic if you want though.
    Craig

  • Deploy Symantec certificate profiles to mobile devices using Microsoft Intune to manage company resources like WiFi

    We are planning to deploy Symantec certificate profiles to Mobile devices to manage company resource like WiFi. I've seen documentation on Technet and the post here http://ronnydejong.com/2014/12/15/part-1-deploy-certificates-to-mobile-devices-using-microsoft-intune-ndes-overview/ that
    we need to install Intune NDES connector which needs to be installed on NDES server. These docs are true when we are using Microsoft PKI.
    Here, we're planning to use Symantec cloud PKI to deploy the certificates to mobile devices. So, I would like to know which are the required on-premises components ? NPS, NDES  or something else? Any documentation URL would be helpful ;) We're in planning
    face hence the question in the forum. 
    Regards
    Anoop
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

    Thank you Jason for the reply !
    Sorry for stupid questions !
    Does that mean, NDES is needed only for initial enrollment process of a mobile device? We don't need it deploying Symantec certificate profiles to manage company resources like WiFi VPN etc... Or I'm totally lost here? 
    My understanding is : Mobile devices will get enrolled to Intune and that device will become a managed device. Now, the mobile device needs to get a connectivity to company resources like VPN or WiFi and for the we may need to deploy certificate profiles.
    Isn't it ? So, you were saying for this process we don't need to have NDES. (or I'm wrong here as well).
    If so, we'll be deploying a public certificate to all the devices via certificate profile deployment and the devices need to get connected with issuing authority to get a device specific private key before connecting to WiFi or VPN?
    Regards
    Anoop 
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

Maybe you are looking for