Certificate Registration Point Role Installation Errors SCCM 2012 r2 cu3

Hi Everyone I am trying to get this role installed but having errors when I check the logs.

Interesting as this is my 1st time installing this role and it looks like it is a matter of waiting...as I now see

Similar Messages

Error 500 when installing Certificate Registration Point

Hello,
I am trying to create a testlab for Certificate Profiles in SCCM 2012 R2. I'm following http://technet.microsoft.com/en-us/library/dn270539.aspx but i'm stuck at the last part. I installed the Certificate Registration Point but I get the following error
in SCCM Component status: Certificate Registration Point is not responding to HTTP requests. The error encountered was 500. Please refer to crpctrl.log for further details.
When I check crpctrl.log:
Checking CRP service availability state
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Machine name is 'SCCM.domain.local'.
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Begin validation of Certificate [Thumbprint 6c7a51e1584fa851e3888dc633563cbc671bf57f] issued to 'SCCM.domain.local'
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Certificate doesn't have "SSL Client Authentication" capabilities.
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Completed validation of Certificate [Thumbprint 6c7a51e1584fa851e3888dc633563cbc671bf57f] issued to 'SCCM.domain.local'
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Skipping this certificate which is not valid for ConfigMgr usage.
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Begin validation of Certificate [Thumbprint 213e97a48ffbc19402df6d4d6dd840c92d341053] issued to 'SCCM.domain.local'
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Completed validation of Certificate [Thumbprint 213e97a48ffbc19402df6d4d6dd840c92d341053] issued to 'SCCM.domain.local'
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Skipping this certificate which is not valid for ConfigMgr usage.
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
There are no certificate(s) that meet the criteria.
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Performing machine FQDN to SAN2 search.
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Certificate SAN2 extension doesn't have DNS name.
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Begin validation of Certificate [Thumbprint 213e97a48ffbc19402df6d4d6dd840c92d341053] issued to 'SCCM.domain.local'
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Completed validation of Certificate [Thumbprint 213e97a48ffbc19402df6d4d6dd840c92d341053] issued to 'SCCM.domain.local'
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Begin validation of Certificate [Thumbprint 1c9623d4708d59b008b2e3c8e1c1bab1a4e9248f] issued to 'SCCM.domain.local'
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Certificate doesn't have "SSL Client Authentication" capabilities.
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Completed validation of Certificate [Thumbprint 1c9623d4708d59b008b2e3c8e1c1bab1a4e9248f] issued to 'SCCM.domain.local'
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Begin validation of Certificate [Thumbprint 17fb1e28e875df2a88ad7d692334f19e740bc500] issued to 'SCCM.domain.local'
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Certificate has "SSL Client Authentication" capability.
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Completed validation of Certificate [Thumbprint 17fb1e28e875df2a88ad7d692334f19e740bc500] issued to 'SCCM.domain.local'
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Begin validation of Certificate [Thumbprint 0f6747ffedf3f8920470c3847b5af7048c58fe4d] issued to 'SCCM.domain.local'
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Certificate has "SSL Client Authentication" capability.
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
Completed validation of Certificate [Thumbprint 0f6747ffedf3f8920470c3847b5af7048c58fe4d] issued to 'SCCM.domain.local'
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
>>> Selected Certificate [Thumbprint 0f6747ffedf3f8920470c3847b5af7048c58fe4d] issued to 'SCCM.domain.local' for HTTPS Client Authentication
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:27:59
6040 (0x1798)
CRP's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:28:00
6040 (0x1798)
Health check request failed, status code is 500, 'Internal Server Error'.
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:28:00
6040 (0x1798)
STATMSG: ID=10202 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_CERTIFICATE_REGISTRATION_POINT" SYS=SCCM.domain.local SITE=S01 PID=2988 TID=6040 GMTDATE=vr mrt 14 12:28:00.163 2014 ISTR0="500"
ISTR1="Internal Server Error" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:28:00
6040 (0x1798)
Completed the CRP availability check against local computer.
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:28:00
6040 (0x1798)
Starting CRP certificate maintenance...
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:28:00
6040 (0x1798)
Successfully granted permission to certificate
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:28:00
6040 (0x1798)
CRP website is using PKI issued certificate
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:28:00
6040 (0x1798)
Finished certificate maintenance...
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:28:00
6040 (0x1798)
Waiting for changes for 600 seconds
SMS_CERTIFICATE_REGISTRATION_POINT
14-03-2014 13:28:00
6040 (0x1798)
The certificate that CRP uses according to the logfile is a PKI certificate with Client Authentication so that should be OK.
When I browse to https://sccm.domain.local/CMCertificateRegistration I get HTTP Error 403.7 - Forbidden, but according to the Technet article I should get HTTP Error 404. I'm a bit lost now where to look next. Thanks.

Hi,
For HTTP Error 403.7 - Forbidden, please have a look on the KB below.
http://support.microsoft.com/kb/942067
And make sure the prerequisites for Certificate Registration Point and Certificate Profiles have met.http://technet.microsoft.com/en-us/library/c1e93ef9-761f-4f60-8372-df9bf5009be0#BKMK_SupConfigSiteSystemReq
http://technet.microsoft.com/en-us/library/dn261205.aspx
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

New-CMVhd error Not Found - SCCM 2012 R2 CU3

When trying to execute New-CMVhd via powershell in SCCM 2012 R2 CU3 I get a "Not Found" error.
This happens in our production and pre-production environments.
Using the Console wizard works fine.
Command is:
New-CMVhd -Path "\\machine\D$\Windows2012R2Server_SCCM.vhd" -Name "Windows2012R2Server_SCCM" -Version "1.0" -VHDSize 100 -TaskSequencePackageId "XXX00123" -DistributionPointServerNames "server.contso.com" -Description "Built with Deploy Server To VHD Task Sequence." -Verbose
Output:
VERBOSE: Performing the operation "New" on target "Vhd: New".
VERBOSE: Executing WQL query: Select * From SMS_TaskSequencePackageReference_All where PackageID='XXX00123'
VERBOSE: Query options: None
VERBOSE: Executing WQL query: Select * From SMS_DistributionPointInfo where Name='server.contoso.com'
VERBOSE: Query options: None
VERBOSE: Query 'Select * From SMS_DistributionPointInfo where Name='server.contoso.com'' processed 1
results.
VERBOSE: Executing WQL query: SELECT Distinct tspr.RefPackageID FROM SMS_TaskSequencePackageReference_All AS tspr WHERE
tspr.PackageID='XXX00123' and tspr.RefPackageID Not In (SELECT PackageID FROM SMS_Package AS p WHERE
p.PkgSourceFlag=1)
VERBOSE: Query options: None
New-CMVhd : Not found
At line:1 char:1
+ New-CMVhd -Path \\machine\D$\Windows2012R2Server_SCCM.vhd -Name "Windows201 ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Microsoft.Confi...s.NewVhdCommand:NewVhdCommand) [New-CMVhd], WqlQueryExc
eption
+ FullyQualifiedErrorId : UnhandledExeception,Microsoft.ConfigurationManagement.Cmdlets.Osd.Commands.NewVhdCommand
Can anyone else reproduce this? I have a feeling it will be a premier support call to Microsoft :-(
Thanks

Hi,
Pls try to run the following command to import CM powershell module and change the path to be the CM server before your new-cmvhd command:
import-module 'C:\Program Files (x86)\Microsoft Configuration Manager\AdminConsole\bin\ConfigurationManager.psd1'
Set-Location CMserver:\
“Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.”

Fasten the Process of MDT UDI OD Installation in SCCM 2012 R2 OSD

Hi,
I have implemented MDT UDI Task Sequence in SCCM 2012 R2 OSD. The issue which I am facing is the UDI Installation progress is very slow. it is taking around 2 hours to complete the whole Installation.
Is there any way to fasten the Process of MDT UDI OD Installation in SCCM 2012 R2 OSD.
Thanks & Regards,
Sanjay Dubey

Application installs can take awhile - it depends on what applications you're installing, and how many. For instance, installing Office is clearly going to take longer than say 7-Zip. How many applications are you installing during a normal OS
deployment? You can check the AppEnforce.log to see how long an application(s) is taking to install, as the start and end times are recorded.
As for the MDT Settings package, how many times are you calling this package? My task sequence only calls it 5 times, and one of them is before you even get the UDI wizard, while the second and third is an either/or situation, depending on whether
you do a refresh or a fresh PC build.

Office 2013 Professional Plus - 32 bit Deployment takes an unacceptable time to deploy in SCCM 2012 - SP1 CU3

We recently migrated over to SCCM 2012 SP1 - CU3 the first of the year from SCCM 2007 SP2. We have used SCCM in the past to deploy Office 2010 and had deployed Office 2013 to our IT Dept. before moving over to SCCM 2012. The deployment went as
expected. Now that we are ready to start deploying Office 2013 to our corporate workstations, the deployment time is running 4.5 hours to 5.5 hours from the local site server DP. I am afraid to find out what time we are looking at for remote DP's.
The three factors that are different is that our SCCM site server is virtual, it is running 2012 for the OS, and obviously SCCM 2012-SP1 - CU3. We are using the same package source files. Previous to a successful deployment we were
seeing hash mismatch errors which MS support pointed us to the nic driver on the VM was using E1000E and to change it to a VMX something driver.
So I guess my question is anyone else out there deploying Office 2013 ProPlus - 32 bit from this type of environment? Our previous deployment time for office was a little over an hour (not five hours). Any suggestions where to look to improve
the deployment time?
I am expected to deploy this in one week and have been working on these issues for weeks.

I see now that you are using a combination of scripts and ConfigMgr package/program.
The AppEnforce.log file is for use with the new ConfigMgr Application model.
Is there any reason that you don't use the new model for deploying Office 2013? It's a single step process and perfect for it. If you use the Office Customisation Tool you can customise what you like. The process will then uninstall Office 2010 and install
Office 2013.
This is how you do it
http://www.gerryhampsoncm.blogspot.ie/2013/03/sccm-2012-sp1-step-by-step-guide-part_9368.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

SCCM 2012 R2 CU3 UPGRADE BROKE REMOTE ADMIN CONSOLE CONNECTIVITY

I installed SCCM 2012 R2 CU3 on my site server but it broke a couple things. I've never had problems with SCCM upgrades before. The admin console works if you log into the site server and run it from there but not when you try it from anywhere else (another
server or a workstation). When you open the admin console on the site server it does have the new version of 5.00.7958.1401. Of the five suggestions that appear when your console won't connect, here's what I know:
1) the remote machines can all ping the site server (call it server 01)
2) we know it's not my account that's a problem as I can open the console on the site server itself
3) This problem happens on server 02, which I put the new admin console on. It also happens with other machines which still have the CU2 console
4) Yes, I'm an admin role, shown by logging into the console on the site server
5) I have another network where everything works. I have not put CU3 on it yet, of course. The WMI permissions on Root, Root\SMS, and Root\SMS\site_ABC are identical on both site servers yet it works on non-upgraded one and not on the upgraded one.
WMI info-I can WMI connect from the site server to these other machines but not WMI connect from the other machines to the site server: not root, SMS, or SMS\site_ABC, nor cimv2, even though the permissions match what is on the working network.
When I launch the console from the site server entries about loading the console loading ok are in SMSAdminUI.log, but when I try to launch the console from other machines no entries are made, even though I changed the SmsAdminSNapIN value to VERBOSE.
I checked DCOM permissions and they are the same on both networks.
Another issue that appeared with this upgrade: I can install the client upgrade to CU3 on other machines but on the site server it fails with "Internal Error 2503" and when you click OK it you get "Internal Error 2502".
Ben JohnsonWY

I'd suspected this WMI problem was only affecting our Server 2012 boxes. I compared RSOPs and noticed the ones having this problem were all under the same OU and getting few GPOs. Our GPO person found a GPO that has somehow become unlinked. He relinked
it. After a gpo update AND a reboot these machines start working again. So CU3 did not cause this WMI after all.
And yes, the CU2 consoles won't connect to a CU3 site server, you have to run the console upgrade.
I fixed the "internal error 2503/2502" by doing this: open task manager, click details, end the explorer task (screen will look blank at first). Click File and select "start new task", enter "explorer.exe' and click the run as admin
button. The msp for CU3 client installed and the screen looks normal again. I only saw this error on the site server and have never seen it before.
Ben JohnsonWY

CCMSETUP not updating on SCCM 2012 SP1 CU3/CU4 primary site

I have a SCCM 2012 SP1 CU3 primary site and i can't upgrade the local installed SCCM Client.
The error I get in ccmsetup.log is:
<![LOG[MSI: Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002]LOG]!><time="15:44:22.408-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:300">
<![LOG[MSI: Action 15:44:22: Rollback. Rolling back action:]LOG]!><time="15:44:22.562-60" date="02-08-2014" component="ccmsetup" context="" type="0" thread="2496" file="msiutil.cpp:314">
<![LOG[File C:\windows\ccmsetup\{59A0EA77-D28C-4286-83A6-04BB57B9CDD6}\client.msi installation failed. Error text: ExitCode: 1603
Action: CcmRegisterHostingConfiguration.
ErrorMessages:
Setup was unable to register the CCM_Service_HostingConfiguration endpoint
The error code is 80041002
]LOG]!><time="15:45:00.798-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="msiutil.cpp:872">
<![LOG[Client installation has failed too many times. Ccmsetup will now abort.]LOG]!><time="15:45:00.830-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7941">
<![LOG[Successfully deleted the ccmsetup service]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2496" file="ccmsetup.cpp:3320">
<![LOG[InstallFromManifest failed 0x80070643]LOG]!><time="15:45:05.831-60" date="02-08-2014" component="ccmsetup" context="" type="3" thread="2496" file="ccmsetup.cpp:7086">
<![LOG[CcmSetup failed with error code 0x80070643]LOG]!><time="15:45:05.832-60" date="02-08-2014" component="ccmsetup" context="" type="1" thread="2324" file="ccmsetup.cpp:10544">
I have this on my primary and secondary servers as well.
Is upgrading to R2 recommended and will that solve this issue ?
When googling to this issue i found that there is a solution for this: remove MP, upgrade Client, install MP.
But this is my primary and secondary and on secondary i am not allowed to remove the MP. It is hardcoded enabled.

Try the following steps to specify the hotfix when installing the client.
1. Open an elevated command prompt.
2. Run a command line similar to the following – if CU3 has already been installed, the MSP file below should be on the site server, in the
\\servername\SMS_SITE\Client\hotfix folder:
\ccmsetup.exe PATCH=\Configmgr2012ac-sp1-kb2882125-x64.msp
Juke Chou
TechNet Community Support

New SCCM 2012 client machines still getting SCCM 2012 SP1 client not the new SCCM 2012 SP1 CU3 client

Hi,
I've successfully (as far as I can tell) deployed SCCM 2012 SP1 CU3 and all my existing clients are showing a client version of 5.00.7804.1400. But when I setup a new client system recently I noticed that the client version was showing 5.00.7804.1000,
and not 5.00.7804.1400.
For new client systems, do I need to redeploy the packages that were created for SCCM 2012 SP1 CU3 so that the new systems get the new SCCM 2012 SP1 CU3 client?
Thanks,
Nick

Hi,
Here's some good information to look over:
http://sccmfaq.wordpress.com/2013/09/24/sccm-2012-include-cu-in-osd/
I haven't followed these instructions myself, since I haven't really had any good reason to include CUs during the initial installation process. I use this method instead and I've never run into any problems:
http://www.ronnipedersen.com/2013/06/installing-sccm-2012-sp1-cu2-quick-start-guide/
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

SCCM 2012 R2 CU3 PXE issue

Hi,
I have a SCCM 2012 R2 CU3 lab where pxe is not working, the clients are able to connect to SCCM server but the download gets stuck on the boot image & then it fails with the following error :-
Don't find any specific error related to this deployment in SMSPXE.log.
Thanks,
Pranay.

I've had some issues various places with NICs and the TFTP process. One fix I implemented was to add the following registry entry:
Location:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WDSServer\Providers\WDSTFTP
Name: MaximumBlockSize
Type: (REG_DWORD)
Value range: 512–1456
Base: (Decimal)
I set it to 1024, but you need to determine what value works for your environment.
This is documented here:
http://support.microsoft.com/kb/975710/en-us
Jeff

SCCM 2012 Sp1 CU3 support Windows 2012 R2 deployment?

Hi,
Sorry for so basic question, but I have read few docuemnts, blogs and official materials and I'm a bit confused.
In our organization we have SCCM Sp1 CU3. We are planning create and next deploy Windows 2012R2 Server images. On some documentations there is CU3 supports only application managment, inventory and so on. but there is nothing about image deployment.
So, my question is - I have to upgrade SCCM 2012 Sp1 CU3 to SCCM2012R2 to capture, build and deploy Windows 2012R2 system?
Thank you.

Yes, you do. See what's new with ConfigMgr 2012 R2
http://technet.microsoft.com/en-us/library/dn236351.aspx
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

Installation of SCCM 2012 R2 and SQL Server 2014 error

Hello All,
I am attempting to setup SQL Server 2014 and SCCM 2012 R2 but I keep running into an error stating that "Configuration Manager requires Microsoft SQL Server
2008 SP2 w/ CU9........ all the way up to Microsoft SQL Server 2012 with CU2 or higher." I am using all evaluation versions for this configuration as we are looking to test and evaluate the products. I was trying it with SQL 2014 because I was running
into the same error with SQL 2012 and according to "http://blogs.technet.com/b/configmgrteam/archive/2015/03/30/updated-sc2012-configmgr-sp1-and-sc2012r2-configmgr-support-sql-server-2014.aspx" SQL
2014 is supported with SCCM 2012 R2. SQL is installed locally on the same box.
Any suggestions would be appreciated.
Thanks,
Tucker
Update: When running the Pre-Req check these are some of the failed returns.....
SQL Server Edition: Failed: Configuration Manager primary site and central administration site don't support SQL Server Express Edition
Not sure why it is recognizing SQL Express as this is a new machine.
SQL Server service running account: Failed: The logon account for the SQL Server service cannot be a local user account, NT SERVICE\<sql service name> or LOCAL SERVICE. You must configure
the SQL Server service to use a valid domain account, NETWORK SERVICE, or LOCAL SYSTEM.
For the SQL Service I am using a domain account created specifically for this.

This has nothing to do with moving or restoring. The kb article says "This hotfix provides updated versions of the setup files and enables new installations
of the System Center 2012 R2 Configuration Manager site database role and the System Center 2012 Configuration Manager SP1 site database role in Microsoft SQL Server 2014"
Torsten Meringer | http://www.mssccmfaq.de

Critical Errors SCCM 2012 (Distribution Point and Reporting services point)

Hello,
We are getting errors under the Site Status for the Distribution Point and Reporting services point. Was running fine and have not really made any changes but all of a sudden we have these critical errors.
The report server service is not running on Reporting Service Point server "XXXXXXXXXXX"; start the service to enable reporting.
We have stopped and restarted the SQL 2012 reporting service point with no errors. What else should we look at for this error? And are these related?
Thanks,
Bobby

Hi,
Have you checked the log file SRSRP.log?
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Boot\BCD error - SCCM 2012 R2

Hi,
This is a last ditch attempt before I throw in the towel and rebuild the server.
I am running an SCCM 2012 R2 Hierarchy with two primaries and multiple distribution points.
One of our main DPs has started coming up with an error when pxe booting a windows 7 machine. This happened after a corrupt driver was added to the boot image. The driver was removed and all the DP's rolled back but the issue still remains on this server
alone. We use an IPhelper to point the pxe requests at this server.
The error message is:
File: \Boot\BCD
Status: 0xc0000098
Info: The Windows Boot Configuration Data file does not contain a valid OS entry.
I have tried the following:
1. Removing the PXE role and reapplying it.
2. Removing the Boot images and reapplying them.
3. Removing the DP altogether from the console and reapplying.
4. Removing all data from the DP and starting again.
5. Redistributing the boot images. both x86 and x64
6. creating a new boot image for both x86 and x64 and applying those.
smspxe log is as follows
D4:3D:7E:BF:11:A4, 00000000-0000-0000-0000-D43D7EBF11A4: device is not in the database.
SMSPXE 20/10/2014 09:30:44
5064 (0x13C8)
Warning: Matching Processor Architecture Boot Image (0) not found
SMSPXE 20/10/2014 09:30:44
5064 (0x13C8)
D4:3D:7E:BF:11:A4, 00000000-0000-0000-0000-D43D7EBF11A4: Not serviced.
SMSPXE 20/10/2014 09:30:44
5064 (0x13C8)
Warning: Matching Processor Architecture Boot Image (0) not found
SMSPXE 20/10/2014 09:31:04
5064 (0x13C8)
D4:3D:7E:BF:11:A4, 00000000-0000-0000-0000-D43D7EBF11A4: Not serviced.
SMSPXE 20/10/2014 09:31:04
5064 (0x13C8)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 09:33:20
2208 (0x08A0)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 09:33:20
2208 (0x08A0)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 10:33:20
5012 (0x1394)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 10:33:20
5012 (0x1394)
Found new image CAS00004 SMSPXE
20/10/2014 10:53:11 6076 (0x17BC)
ADK installation root registry value not found.
SMSPXE 20/10/2014 10:53:11
6076 (0x17BC)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 10:53:11 6076 (0x17BC)
Opening image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 10:53:11
6076 (0x17BC)
Found Image file: D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
PackageID: CAS00004
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 10:53:11 6076 (0x17BC)
Closing image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 10:53:11
6076 (0x17BC)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 10:53:40
6076 (0x17BC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 10:53:40
6076 (0x17BC)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 10:58:12
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 10:58:12
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 10:59:07
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 10:59:07
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:00:05
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:00:05
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:05:24
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:05:24
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:06:05
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:06:05
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:07:15
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:07:15
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:07:58
4928 (0x1340)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:07:58
4928 (0x1340)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:09:31
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:09:31
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:11:58
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:11:58
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:13:52
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:13:52
4664 (0x1238)
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE
20/10/2014 11:15:27 5064 (0x13C8)
E8:03:9A:B3:F3:8A, 163A84E0-1DD8-11B2-8000-DF82815C2DDB: device is not in the database.
SMSPXE 20/10/2014 11:15:27
5064 (0x13C8)
Getting boot action for unknown machine: item key: 2046820364
SMSPXE 20/10/2014 11:15:27
5064 (0x13C8)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820364" ServerName=""><Machine><ClientID>47938388-164c-4bfb-8621-28b57859ad3c</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="PNL20009" OfferIDTime="26/02/2014 15:13:00" PkgID="PNL0000C" PackageVersion="" PackagePath="http://INTCMNCLDP001.intraining.co.uk/SMS_DP_SMSPKG$/CAS00004"
BootImageID="CAS00004" Mandatory="0"/></ClientIDReply>
SMSPXE
20/10/2014 11:15:27 5064 (0x13C8)
E8:03:9A:B3:F3:8A, 163A84E0-1DD8-11B2-8000-DF82815C2DDB: found optional advertisement PNL20009
SMSPXE 20/10/2014 11:15:27
5064 (0x13C8)
Getting boot action for unknown machine: item key: 2046820364
SMSPXE 20/10/2014 11:16:14
5064 (0x13C8)
Client boot action reply: <ClientIDReply><Identification Unknown="0" ItemKey="2046820364" ServerName=""><Machine><ClientID>47938388-164c-4bfb-8621-28b57859ad3c</ClientID><NetbiosName/></Machine></Identification><PXEBootAction
LastPXEAdvertisementID="" LastPXEAdvertisementTime="" OfferID="PNL20009" OfferIDTime="26/02/2014 15:13:00" PkgID="PNL0000C" PackageVersion="" PackagePath="http://INTCMNCLDP001.intraining.co.uk/SMS_DP_SMSPKG$/CAS00004"
BootImageID="CAS00004" Mandatory="0"/></ClientIDReply>
SMSPXE
20/10/2014 11:16:14 5064 (0x13C8)
E8:03:9A:B3:F3:8A, 163A84E0-1DD8-11B2-8000-DF82815C2DDB: found optional advertisement PNL20009
SMSPXE 20/10/2014 11:16:14
5064 (0x13C8)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:26:15
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:26:15
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:27:12
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:27:12
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:27:25
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:27:25
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:28:36
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:28:36
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:29:41
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:29:41
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:30:43
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:30:43
4664 (0x1238)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:33:20
4664 (0x1238)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:33:20
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:33:51
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:33:51
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:35:31
4664 (0x1238)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:35:31
4664 (0x1238)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:37:29
6076 (0x17BC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:37:29
6076 (0x17BC)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:39:25
6076 (0x17BC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:39:25
6076 (0x17BC)
================= PXE Provider shutdown. =====================
SMSPXE 20/10/2014 11:42:25
4700 (0x125C)
================= PXE Provider loaded. =====================
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Machine is running Windows Longhorn. (NTVersion=0X603, ServicePack=0)
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Initializing PXEPerfObject. SMSPXE
20/10/2014 11:43:19 4372 (0x1114)
Could not load logging configuration for component ccmperf. Using default values.
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
HTTP is selected for Client. The current state is 0.
SMSPXE 20/10/2014 11:43:19
4372 (0x1114)
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
Adding CAS00004.40 SMSPXE
20/10/2014 11:43:20 4372 (0x1114)
Adding CAS00005.45 SMSPXE
20/10/2014 11:43:30 4372 (0x1114)
Found new image CAS00004 SMSPXE
20/10/2014 11:43:44 4372 (0x1114)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:43:44
4372 (0x1114)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:43:44 4372 (0x1114)
Opening image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 11:43:44
4372 (0x1114)
Found Image file: D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
PackageID: CAS00004
ProductName: Microsoft® Windows® Operating System
Architecture: 0
Description: Microsoft Windows PE (x86)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:43:44 4372 (0x1114)
Closing image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 11:43:44
4372 (0x1114)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:44:34
2028 (0x07EC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:44:34
2028 (0x07EC)
Found new image CAS00005 SMSPXE
20/10/2014 11:44:56 4372 (0x1114)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:44:56
4372 (0x1114)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:44:56 4372 (0x1114)
Opening image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:44:56
4372 (0x1114)
Found Image file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
PackageID: CAS00005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:44:56 4372 (0x1114)
Closing image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:44:57
4372 (0x1114)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:45:45
2028 (0x07EC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:45:45
2028 (0x07EC)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:45:54
4372 (0x1114)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:45:54
4372 (0x1114)
PXE Provider finished loading. SMSPXE
20/10/2014 11:45:54 4372 (0x1114)
Error opening file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim. Win32=32
SMSPXE 20/10/2014 11:46:33
4744 (0x1288)
Retrying D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:46:33
4744 (0x1288)
Boot image CAS00005 has changed since added
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:46:36 4744 (0x1288)
Opening image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
Found Image file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
PackageID: CAS00005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:46:36 4744 (0x1288)
Closing image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:46:36
4744 (0x1288)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:46:53
2028 (0x07EC)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:46:53
2028 (0x07EC)
Boot image CAS00005 has changed since added
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:47:50 4744 (0x1288)
Opening image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
Found Image file: D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
PackageID: CAS00005
ProductName: Microsoft® Windows® Operating System
Architecture: 9
Description: Microsoft Windows PE (x64)
Version:
Creator:
SystemDir: WINDOWS
SMSPXE
20/10/2014 11:47:50 4744 (0x1288)
Closing image file D:\RemoteInstall\SMSImages\CAS00005\boot.CAS00005.wim
SMSPXE 20/10/2014 11:47:50
4744 (0x1288)
================= PXE Provider shutdown. =====================
SMSPXE 20/10/2014 11:47:58
4372 (0x1114)
================= PXE Provider loaded. =====================
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Machine is running Windows Longhorn. (NTVersion=0X603, ServicePack=0)
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Cannot read the registry value of MACIgnoreListFile (00000000)
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
MAC Ignore List Filename in registry is empty
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Begin validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Completed validation of Certificate [Thumbprint C435C200EAF495312097132FFE12CF330A54DA8A] issued to '3ed87d92-4f15-4d7d-ba52-35dc6b972484'
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Initializing PXEPerfObject. SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
Could not load logging configuration for component ccmperf. Using default values.
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
HTTP is selected for Client. The current state is 0.
SMSPXE 20/10/2014 11:48:26
5008 (0x1390)
Client lookup reply: <ClientIDReply><Identification Unknown="0" ItemKey="0" ServerName=""><Machine><ClientID/><NetbiosName/></Machine></Identification></ClientIDReply>
SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
PXE::CBootImageInfo::CBootImageInfo: key= SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
Adding CAS00004.40 SMSPXE
20/10/2014 11:48:26 5008 (0x1390)
Adding CAS00005.45 SMSPXE
20/10/2014 11:48:50 5008 (0x1390)
Found new image CAS00004 SMSPXE
20/10/2014 11:49:15 5008 (0x1390)
ADK installation root registry value not found.
SMSPXE 20/10/2014 11:49:15
5008 (0x1390)
Loaded C:\Windows\system32\wimgapi.dll SMSPXE
20/10/2014 11:49:15 5008 (0x1390)
Opening image file D:\RemoteInstall\SMSImages\CAS00004\boot.CAS00004.wim
SMSPXE 20/10/2014 11:49:15
5008 (0x1390)
If anyone has any further info on this please can you let me know?
Thanks so much.
Katie

Hello,
Is your WDS running properly? If WDS is stopped, can you start it manually?
Or you get an error like 'The service did not respond in a timely fashion'?
The symptom is so similar to that I have encountered. You referred that you have tried to remove WDS, DP, but I wonder how. Before removing WDS and DP role, try to delete corrupt package in SCCMContentLib folder.
I just recreated SCCMContentLib, and WDS did start working. I guess there are corrupt packages in the my folder as well. But another problem occur, I installed all the roles on the same server in my lab, so it is a primary site server as well. As a result,
it seems that I have to re-deploy all the packages. Not sure if there is any further problem yet. Since it is just a lab environment, it doesn't matter for me.
I hope what I have done will give you some clue.

Management Point fails after installing SCCM 2012 SP1

I'm carrying out an install of SCCM 2012 SP1 with the following hardware (fresh install not an upgrade from 2007)
1. Newly built Windows Server 2012 box
2. Site database located on a remote SQL 2012 cluster, both nodes Windows Server 2012, with CU5
The install went fine but when checking the Site Server Components the Management Point isn't installing. The following both show errors;
SMS_MP_CONTROL_MANAGER - MP.msi could not install. Checked the MP.msi log file which shows the following errors;
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_Global.mof' (Phase: 3, Object: 5, Lines: 76 - 83, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\PolicyDefaults.mof' (Phase: 3, Object: 4, Lines: 49 - 57, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\StateMsgSchema.mof' (Phase: 3, Object: 6, Lines: 89 - 94, Error: 80041002)
[19:53:18] Failed to compile 'C:\Program Files\SMS_CCM\DataTransferService.mof' (Phase: 3, Object: 5, Lines: 318 - 323, Error: 80041002)
[19:53:19] Failed to compile 'C:\Program Files\SMS_CCM\CcmExec_MP.mof' (Phase: 3, Object: 1, Lines: 31 - 36, Error: 80041002)
MSI (s) (0C!94) [19:53:20:862]: Product: ConfigMgr Management Point -- Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
Error 25140. Setup was unable to compile the file CcmExec_Global.mof
The error code is 80041002
CustomAction CcmRegisterWmiMofFile returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
SMS_NOTIFICATION_SERVER - bgbisapi.msi could not install. Extract from log below;
[19:53:38] IGNORE: Failed to delete extension 'C:\Program Files\SMS_CCM\bgbisapi.dll'. Return Code = 0x80020009 (The extension might not be registered)
[19:53:39] WARNING: Failed to remove PerfLib entries for performance application SmsBgb (2)
[19:53:39] WARNING: Failed to remove configuration for performance application SmsBgb (80070057)
MSI (s) (0C!80) [19:53:39:540]: Product: BGB http proxy -- Internal Error 25001. 80070057
Internal Error 25001. 80070057
CustomAction CcmRegisterPerfCounters returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
I've tried uninstalling MP and reinstalling, triple checked all the right pre-reqs in Roles and Features are enabled, even rebuilt the server from scratch and tried again but same result.
Would really appreciate some help if anyone's fixed this issue

I'm still struggling, I've uninstalled MP
<04/16/14 08:06:59> SMSMP Setup Started....
<04/16/14 08:06:59> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /deinstall /siteserver:EICSC001 SMSMP 0
<04/16/14 08:06:59> Deinstalling the SMSMP
<04/16/14 08:06:59> No versions of SMSMP are installed. Returning Success.
<04/16/14 08:06:59> ~RoleSetup().
Ran the command, Invoke-Command {gwmi -query "SELECT * FROM __Namespace WHERE Name='CCM'" -Namespace "root" | Remove-WmiObject}
Checked Namespace Instances to ensure '= ccm' is not longer there.
Rebooted Server and re-installed MP but it still fails
<04/16/14 08:37:26> ====================================================================
<04/16/14 08:37:26> SMSMP Setup Started....
<04/16/14 08:37:26> Parameters: D:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe /install /siteserver:EICSC001 SMSMP 0
<04/16/14 08:37:26> Installing Pre Reqs for SMSMP
<04/16/14 08:37:26> ======== Installing Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Found 2 Pre Reqs for Role SMSMP
<04/16/14 08:37:26> Pre Req MSXML60 found.
<04/16/14 08:37:26> No versions of MSXML60 are installed. Would install new MSXML60.
<04/16/14 08:37:26> Enabling MSI logging. msxml6_x64.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\msxml6_x64MSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\00000409\msxml6_x64.msi
<04/16/14 08:37:26> msxml6_x64.msi exited with return code: 0
<04/16/14 08:37:26> msxml6_x64.msi Installation was successful.
<04/16/14 08:37:26> Pre Req SqlNativeClient found.
<04/16/14 08:37:26> SqlNativeClient already installed (Product Code: {D411E9C9-CE62-4DBF-9D92-4CB22B750ED5}). Would not install again.
<04/16/14 08:37:26> Pre Req SqlNativeClient is already installed. Skipping it.
<04/16/14 08:37:26> ======== Completed Installation of Pre Reqs for Role SMSMP ========
<04/16/14 08:37:26> Installing the SMSMP
<04/16/14 08:37:26> Passed OS version check.
<04/16/14 08:37:26> IIS Service is installed.
<04/16/14 08:37:26> No versions of SMSMP are installed. Installing new SMSMP.
<04/16/14 08:37:26> Enabling MSI logging. mp.msi will log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
<04/16/14 08:37:26> Installing D:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi CCMINSTALLDIR="D:\Program Files\SMS_CCM" CCMSERVERDATAROOT="D:\Program Files\Microsoft Configuration Manager" USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE
SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1
<04/16/14 08:37:26> mp.msi exited with return code: 1603
<04/16/14 08:37:26> Backing up D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log to D:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log.LastError
<04/16/14 08:37:26> Fatal MSI Error - mp.msi could not be installed.
<04/16/14 08:37:26> ~RoleSetup().
On checking I don't seem to have anything in IIS, no default web site.
I've tried reinstalling IIS and reinstalling SCCM 2012 but what ever I do I still hit the same issue with the Management Point.
Any assistance would be greatly appreciated.
Thanks

Execute report error SCCM 2012 R2 CU1

Hello guys, my Customer have a SCCM 2012 R2 CU1 all part of SCCM is working exept the reporting.
I have install the reporting role and the installation succeeded on install but when I run any of the report we have an error:
Une erreur s'est produite lors du traitement du rapport. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: Une erreur s'est produite lors du traitement du rapport. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
Impossible d'emprunter l'identité de l'utilisateur pour la source de données 'AutoGen__5C6358F2_4BB6_4a1b_A16E_8D96795D8602_'. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Échec de l'ouverture de session. Vérifiez que le
nom d'utilisateur et le mot de passe sont corrects. ---> System.Exception: Pour obtenir plus d'informations sur cette erreur, accédez au serveur de rapports sur le serveur local ou activez les erreurs distantes.
Microsoft.ConfigurationManagement.ManagementProvider.SmsException
Une erreur s'est produite lors du traitement du rapport.
Stack Trace:
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
System.Web.Services.Protocols.SoapException
Une erreur s'est produite lors du traitement du rapport. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: Une erreur s'est produite lors du traitement du rapport. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException:
Impossible d'emprunter l'identité de l'utilisateur pour la source de données 'AutoGen__5C6358F2_4BB6_4a1b_A16E_8D96795D8602_'. ---> Microsoft.ReportingServices.Diagnostics.Utilities.LogonFailedException: Échec de l'ouverture de session. Vérifiez que le
nom d'utilisateur et le mot de passe sont corrects. ---> System.Exception: Pour obtenir plus d'informations sur cette erreur, accédez au serveur de rapports sur le serveur local ou activez les erreurs distantes.
Stack Trace:
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.GetParameters()
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ParameterPresenter.LoadParameters(IReport report, Collection`1 navigationParameters, IResultObject resultObject)
   at Microsoft.ConfigurationManagement.AdminConsole.SrsReporting.ReportViewerPresenter.Worker_DoWork(Object sender, DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
   at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
Do you have an idea?

Yes but, where is the place to add name and password? I have use the same account that I have take to install sccm. I have seted the name when i have installed the report role is it the place you talked?
Administration/Servers and Site System Roles in feature Reporting Service/Properties/ option: Reporting Services Point Account.

Certificate Registration Point Role Installation Errors SCCM 2012 r2 cu3

Similar Messages

Maybe you are looking for