Certificate request not working with web server v2 template on windows 2012 R2

I have tried to generate a certificate request on my domain joined Windows 2012 R2. I have tried both online and offline requests. I am using the web server v2 template.
Both Method fails with error message that the cryptographic algorithm is unknown. I am using these settings apart from the template:
This is the error Message in online request:
The error Message in the offline request is somewhat similar.
An event error is also appearing in the application log:
The CSPs from the template:
I am wondering if a cryptographic service provider or several of them are missing? They are installed With Windows update are they not? The strange thing is that this supposedly have worked before with another user. Could it be that I do not have the
correct permissions to request a certificate with this template, or has something happened with the server?

Hey dag
Thanks for posting ,
If You try duplicate the web template for using it in version 4 - can You see any difference?
Also check the link below for certificate templates versions:
http://social.technet.microsoft.com/wiki/contents/articles/13303.windows-server-2012-certificate-template-versions-and-options.aspx#Version_4_Certificate_Templates
In previous operating system versions the configuration of CSPs and KSPs were on different tabs in the certificate properties. For version 2 certificate templates, CSPs were configured on the Request Handling tab. For version 3 certificate templates,
KSPs were configured on the Cryptography tab. Starting in Windows Server 2012, the configuration of the providers is consolidated on the Cryptography tab. To learn more about the cryptographic provider options present in previous operating systems
Notice later.
I'd be glad to answer any question

Similar Messages

BI Publisher not working with Web Cache

BI Publisher not working with Web Cache
I'm trying to enable BI Publisher to run from the internet. I have Web Cache (AS10g rel 2) in an internet DMZ, trying to work with BI Publisher running on a AS10g rel 3 server in a application DMZ. BI Publisher won't allow Web Cache to hide the URL after login. It tries to use the application server name as a URL and gets lost, since this is not resolvable from the internet. We have Content DB, other J2EE application installed in this same configuration, and it works fine.
This is duty managed as of today. They required an enhancement request, which I submitted. SR 6696835.993 -

Currently an enhancement - it was logged as that but IMHO its a bug as other Oracle products work OK - it kinda depends on whether its an ORacle strd to work with webcache or not. Suffice to say, we are investigating the issue and will update the er/bug soon.
Tim

Database Mail not working with SQL Server Agent

I'm running SQL Server 2005 Standard edition 64 bit with SP2 on a 64 bit machine.
Database mail does not work with SQL Server Agent. When I configure SQL Server Agent to use database mail the test email button is greyed out and inactive therefore I cannot send emails using operators or for jub success failure etc.
I've read that there was supposed to be a fix for this with SP1 but I have SP2 and still receive the same problem. Please can somebody help as I do not wish to use SQL Mail as a work around due to this becomming redundant in future versions of SQL Server.
Kind Regards

The problems solved
steps:
1)we create a mail profile at at Managment->Database Mail ,of SQL Managment
2)we set this account as "default" at Managment->Database Mail -> Configure Database Mail -> Manage profile security
3)At tab "Alert System" of SQL Server Agent properties , we check the "Enable mail profile" , Mail System=Database Mail, Mail profile = "the profile we already create"
4)we create a new operator at "Operators" of sql agent, where at "notification options" -> "Email name" we put the mail where we want to sent the agent the mails at failured job
5)We go at a specific job, at tab "Notifications" ,we check the "email" check box and then we choose the operator we just create, at the text box next to check box.
I hope not to forget something
Thank You all for the help

Drag and Drop not working with IE11,Firefox or Chrome on Windows 7 x64 SP1

Hello,
I am trying to use drag and drop on my system but it is not working. other's within my department have no issues, but they are using IE10. I also have SharePoint Designer 2013 installed.
Any suggestions?
Thanks,
Derek

Derek,IE11 is having some compatibility issues with the share point.Apart from IE11,it should work on IE10,9 and Firefox and chrome as well.
Please check the links below that explains the issues with IE11 and the functionality of Drag and drop and limitations as-well.
1.Since SharePoint 2013 fully support IE 32-bit version above 7, there might be compatibility issue with other browsers. I’d recommend you use IE 8,9,10 32-bit for optimal Performance.
2. Open the same document library in Internet Explorer as this functions does not work with Firefox or Chrome by default
3. Make sure the IE (Internet Explorer) Version should be 32-bit and not a 64-bit
http://expertsharepoint.blogspot.de/2014/08/issues-with-sharepoint-2013-and.html
http://expertsharepoint.blogspot.de/2013/12/how-to-upload-multiple-documents-in.html
http://expertsharepoint.blogspot.de/2013/12/sharepoint-server-2013-drag-and-drop.html
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Jakarta Commons -- File Upload does not work with Application Server

Hi ALl,
I tried Jakarta Commons file upload. In the netbeans, I copied the common jar files "commons-io-1.2.jar" and "commons-fileupload-1.1.1.jar" in the
netbeans-5.5\enterprise3\apache-tomcat-5.5.17\common\lib and set the class paths. It is working correctly when I compile and run from the netbeans. However, when I deployed in Sun Application Server PE 9.0, I am receiving the following errors. In Sun application I copied the above jars files to "C:\Sun\AppServer\jdk\jre\lib\ext"..
I have read in several postings that it does not work this way but could find any solution. Any idea will be greatly appreciated.
HTTP Status 500 -
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: java.lang.NoClassDefFoundError: javax/servlet/ServletInputStream
     org.apache.jasper.runtime.PageContextImpl.doHandlePageException(PageContextImpl.java:930)
     org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:863)
     org.apache.jsp.fileUpload_jsp._jspService(fileUpload_jsp.java:109)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:111)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:353)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:409)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:317)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
     com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
     org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:231)
     com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
     com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
     com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
     com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
     com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
     com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
     com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
root cause
java.lang.NoClassDefFoundError: javax/servlet/ServletInputStream
     org.apache.commons.fileupload.servlet.ServletFileUpload.parseRequest(ServletFileUpload.java:116)
     org.apache.jsp.fileUpload_jsp._jspService(fileUpload_jsp.java:76)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:111)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:353)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:409)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:317)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     com.sun.enterprise.web.WebPipeline.invoke(WebPipeline.java:73)
     com.sun.enterprise.web.VirtualServerPipeline.invoke(VirtualServerPipeline.java:120)
     org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:231)
     com.sun.enterprise.web.connector.grizzly.ProcessorTask.invokeAdapter(ProcessorTask.java:667)
     com.sun.enterprise.web.connector.grizzly.ProcessorTask.processNonBlocked(ProcessorTask.java:574)
     com.sun.enterprise.web.connector.grizzly.ProcessorTask.process(ProcessorTask.java:844)
     com.sun.enterprise.web.connector.grizzly.ReadTask.executeProcessorTask(ReadTask.java:287)
     com.sun.enterprise.web.connector.grizzly.ReadTask.doTask(ReadTask.java:212)
     com.sun.enterprise.web.connector.grizzly.TaskBase.run(TaskBase.java:252)
     com.sun.enterprise.web.connector.grizzly.WorkerThread.run(WorkerThread.java:75)
note The full stack trace of the root cause is available in the Sun Java System Application Server Platform Edition 9.0 logs.
Sun Java System Application Server Platform Edition 9.0
Thank you,
--Sam

Hi All,
I solved this few minutes after I posted this question. Thought I should share with everybody, just in case some one else need it.
I copied these three files in the folder C:\Sun\AppServer\jdk\jre\lib\ext
1. servelet-api.jar
2. commons-io-1.2.jar
3. commons-fileupload-1.1.1.jar
No need to set any class path.
Thanks

IDM is not working with Web Sphere

Hi,
i have installed IDM 7 and make the idm.war and deploying with websphere5. the deployment has success but when i tried to start the application from web sphere admin console the web sphere server stops and not work admin console also.
any other solution.
i am unable to find the loggingtoolkit4j from ibm site and i didn;t get the log.jar
kindly give the path where i can find out

This may not be related, but I found that it may be necessary to turn of the Java 2 security option on the JVM in WebSphere.
To turn off in WebSphere, logon to the WAS Administrative Console and navigate to Security > Configuration > Secure Administration > Applications and Infrastructure. Uncheck the Java 2 Security option.

Report not working on web server iis7

I have just designed a website and added a sap crystal report. The report is working fine when i am running it using VS 2010. But when i am publishing it on iis7, .net framework 4.0, windows server 2008. I have also tried with latest version of crystal report. But it does not showing any thing when i am trying to run it on published server.
The report shows nothing in Mozilla Firfox but in ie it shows an error 'bobj' is undefined. in both browser the cr viewer adder form's post back of dropdownlist not working.But when pressing submit button it's post back happening but no report showing.I have tried with several solution on net but it does not working when i publishing it on server but doing well with vs2010 debugger.
I am using vs 2010 professional, but service pack not installed.
Pls help me in this regard

Hi,
Top right cornor has a text box. Type "bobj is undefined" & you would find many KBs, forums & blogs.
http://www.sdn.sap.com/irj/scn/advancedsearch?query=bobjisundefined
Thanks,
Saurabh

Javascript not working with web.show_document.

Hi,
I executed the below command from forms 10g and it is not working.
web.show_document('javascript:var win=showModalDialog("http://otn.oracle.com/products/forms");','_self');
But if I execute javascript:var win=showModalDialog("http://otn.oracle.com/products/forms"); directly in IE, then it is working.
Frank, can you help me in this or any other people having any idea ?
Very urgent.
Thanks & Regds,
Nandakumar

Hi Mark,
Thanks for your quick reply. Your question is right. I think let me explain clearly my requirement. I have an application accessed in the web. A internet user is trying to a report through the application by giving a parameter as "A". Now using the window.open method, the report is displayed in the IE browser. Now the user can go to history and can see the complete URL with parameters.
If he just copies and pastes that url from history in the browser, the reports runs successfully. If he changes any of the parameter to "B", there is a chance that report will show the report for parameter "B". This should not happen.
Hope this is clear. Let me know if you are not still clear. Moreover, in the IE it is possible to clear history, but for internet based applications, how can we set them.
Thanks & Regds,
Nandakumar

PrintToPrinter Not working in Web Server

Dear Experts,
I have created report for direct printing at client machine. It's working in Local machine. Once i deployed in web server
first time itself viewer opening then second time page loading only even viewer didn't open.
rpt.PrintToPrinter(No_of_copies, True, 0, 0)
Once i comment this line and restart the server first time only viewer opening. i cannot find why it's happening...
How can i solve this issues ?
thanks in advance,
Mani

Hi Ludek,
After installing default printer on Server, i got No printers installed.
below is my code, (checking in Default printer installed or not in TRY)
CR_TGL_EBL.HasPrintButton = False
CR_TGL_EBL.ReportSource = rpt
Try
rpt.PrintToPrinter(No_of_copies, True, 0, 0)
Catch ex As Exception
Page.ClientScript.RegisterStartupScript([GetType](), "printer Problems", (Convert.ToString("alert('" + ex.Message + " ")) +"Your associated printer not working contact the admin!');", True)
End Try
Even i installed default printer i got alert message, How to get direct print in server.
Locally it's working fine. Once i enable printtoprinter it's loading only...
Please help me to solve this issue...
Regards,
Mani.

Spotlight not working with OS Server Leopard

Hello,
In my office we have a recent iMac running OS Server Leopard and Spotlight does NOT work on this computer and never has since day one.
We are very puzzled by this.
Any help would be greatly appreciated!
Thanks,
Marc Griffin

No clue why, but Spotlight is disabled by default. To enable it:
sudo mdutil -i on /

Drop-down box does not work with Web GUI

Situation:
On CE5 (ECC 5.)-> transaction "MM02"
-> click on drop-down for "Material"
-> see distorted pop-up
Solution:
apply kernel patch #144.
ITS is part of the Basis, starting with WebAS 6.40

You wouldn't happen to be using Vista's Home Edition are you? I work from home and have Vista Home on one of my PC's and it has the same issue when I'm connected to 2004s systems. Vista Home isn't supported. Only Vista Prof. Oddly, if I'm using the same GUI to attach to 4.6C releases, I don't have this issue.

SoundFX suddenly not working with PCI-Express SB Titanium and Windows 7 HP 64

Hi guys,
I bought myself a PCI-Express Sounblaster Titanium bulk last friday.
I downloaded some drivers (sorry, I have no idea what Version?) and an Update to the latest official Version (2.7.0007). When I first tried tu use VoiceFX it worked and I was astonished. Its seemed a real cool gimmick.
Strangely, when I tried it again the next day the VoiceFX buttons where still there under the Audio Config thingie, but my voice did not change anymore when I chose for ex. Robot or Ork. It did not matter what I chose, my voice always stayed normal.
Since then I've deen doing nothing else than to deinstall, reinstall drivers, deleting driver traces, trying again. My worst case was that the VoiceFX did not show at all anymore, my best case was as described above.
I even treid the new beta Drivers.
Does anyone have a solution?
If not, can anyone tell me what dependancies VoiceFX has? Is it enough to install only the drivers or does it need something else as well?
With which Driver Version does it definitely work under Win 7 64?
Oh yeah, I have I microphone which I can switch to Mono or Stereo, does it only work with one of the two? Mine was mostly in Stereo mode. (It comes from a company (dunno which one) thats got nothing to do with computers, games or creative, it's one of those Microphones you connect to your tie).
Thanks@all

Weird... I changed nothing and yeterday it worked...
I just understand this, but what the hell?

Keyboard not working with xorg-server 1.6.1-1 or xkeyboard 1.5-1

Hello!
I have a problem with a no working keyboard. It seems like this is a problem related to some of the latest xkeyboard-config or xorg-server versions. This have been a problem some time, but it have been solved by downgrading xkeyboard-config to v1.5-1 and xorg-server to v1.6.1-1.
I'm booting into runlevel 3. Keyboard is working in the terminal, but when I run startx, the keyboard stops working. The mouse works fine.
Have tested with an empty xorg.conf file. Then I get a 'no screen found' error. And I have tryed to enable the keyboard entry in xorg.conf. X starts, but no keyboard. Hal is running.
Any ideas?
The xorg.conf and rc.conf
# Copyright 2004 The X.Org Foundation
Section "ServerLayout"
Identifier "Laptop"
Screen 0 "Default" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
# InputDevice "EvdevMouse" "CorePointer"
# Inputdevice "Trackpoint" "SendCoreEvents"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "True"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
EndSection
Section "Monitor"
Identifier "LCD"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "radeon_hd"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Default"
Device "radeon_hd"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1440x900" "1024x768"
Virtual 2720 1024
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
# /etc/rc.conf - Main Configuration for Arch Linux
LOCALE="en_US.utf8"
HARDWARECLOCK="UTC"
USEDIRECTISA="no"
TIMEZONE="Europe/Oslo"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
MOD_AUTOLOAD="yes"
MODULES=(fglrx vboxdrv vboxnetadp acpi_cpufreq cpufreq_ondemand !pcspkr)
USELVM="no"
HOSTNAME="ArchT400"
eth0="dhcp"
INTERFACES=(!eth0)
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
DAEMONS=(syslog-ng network netfs hal laptop-mode cpufreq crond oss @autowifi @cups @openntpd @hddtemp)
Last edited by orjanp (2009-08-11 13:07:41)

Her er Xorg.0.log
X.Org X Server 1.6.3
Release Date: 2009-7-31
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux ArchT400 2.6.30-ARCH #1 SMP PREEMPT Fri Jul 31 07:30:28 CEST 2009 x86_64
Build Date: 03 August 2009 08:17:16PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 12 10:39:18 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Laptop"
(**) |-->Screen "Default" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "radeon_hd"
(==) No monitor specified for screen "Default".
Using a default monitor configuration.
(**) Option "AutoAddDevices" "True"
(**) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x7540
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:95c4:17aa:210e ATI Technologies Inc Mobility Radeon HD 3400 Series rev 0, Mem @ 0xd0000000/268435456, 0xcfff0000/65536, I/O @ 0x00002000/256, BIOS @ 0x????????/131072
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 7.4.0, module version = 1.0.0
(II) Loading extension XFree86-DRI
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.63.2
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.4.99.906, module version = 8.63.2
Module class: X.Org Video Driver
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for fglrx
(II) ATI Proprietary Linux Driver Version Identifier:8.63.2
(II) ATI Proprietary Linux Driver Release Identifier: 8.632
(II) ATI Proprietary Linux Driver Build Date: Jul 2 2009 12:25:51
(II) Loading PCS database from /etc/ati/amdpcsdb
(WW) This ATI Proprietary Linux Driver does not guarantee support of video driver ABI higher than 2.0
(WW) Video driver ABI version of the X server is 5.0
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x95C4) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) fglrx(0): pEnt->device->identifier=0x154b6d0
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(II) fglrx(0): 10BitPixelFormat disabled by default
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(--) fglrx(0): Chipset: "ATI Mobility Radeon HD 3400 Series" (Chipset = 0x95c4)
(--) fglrx(0): (PciSubVendor = 0x17aa, PciSubDevice = 0x210e)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xcfff0000
(--) fglrx(0): I/O port at 0x00002000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Battery is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 10.88
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: M82
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(--) fglrx(0): Video RAM: 262144 kByte, Type: DDR3
(II) fglrx(0): PCIE card detected
(--) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 1:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(II) fglrx(0): [pcie] 1986048 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(II) fglrx(0): Interrupt handler installed at IRQ 32.
(II) fglrx(0): IRQ 32 Enabled.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) fglrx(0): ***Display: ConnectedDisplayTypes=0x00000002, disabled=0x00000000
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: LEN Model: 4036 Serial#: 0
(II) fglrx(0): Year: 2008 Week: 0
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 30 vert.: 19
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: StandBy Suspend Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.571 redY: 0.340 greenX: 0.338 greenY: 0.542
(II) fglrx(0): blueX: 0.158 blueY: 0.125 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 101.6 MHz Image Size: 304 x 190 mm
(II) fglrx(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1824 h_border: 0
(II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 85.6 MHz Image Size: 304 x 190 mm
(II) fglrx(0): h_active: 1440 h_sync: 1488 h_sync_end 1520 h_blank_end 1848 h_border: 0
(II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 926 v_border: 0
(WW) fglrx(0): Unknown vendor-specific block f
(II) fglrx(0): LP141WP2-TLB1
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff0030ae364000000000
(II) fglrx(0): 00120103801e1378ea4b859257568a28
(II) fglrx(0): 20505400000001010101010101010101
(II) fglrx(0): 010101010101b027a08051841a303020
(II) fglrx(0): 360030be100000197021a09851841a30
(II) fglrx(0): 3020360030be100000190000000f0095
(II) fglrx(0): 0a32950a28191900320c3c01000000fe
(II) fglrx(0): 004c503134315750322d544c4231001f
(II) fglrx(0): End of Display1 EDID data --------------------
(II) fglrx(0): Output LCD using monitor section LCD
(II) fglrx(0): Output DFP1 has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): EDID vendor "LEN", prod id 16438
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
(II) fglrx(0): Output LCD connected
(II) fglrx(0): Output DFP1 disconnected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Using user preference for initial modes
(II) fglrx(0): Output LCD using initial mode 1440x900
(++) fglrx(0): DPI set to (96, 96)
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): QBS disabled
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.3, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(II) fglrx(0): Finished Initialize PPLIB!
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 1.4.x.y with x.y >= 99.906
(WW) fglrx(0): could not detect X server version (query_status=-1)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
(II) fglrx(0): DRIScreenInit for fglrx driver
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports PCI:1:0:0
(II) fglrx(0): [drm] DRM interface version 1.0
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xcd000
(II) fglrx(0): [drm] mapped SAREA 0xcd000 to 0x7f3e01f4b000
(II) fglrx(0): [drm] framebuffer handle = 0xce000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.63.2
(II) fglrx(0): Date: Jul 2 2009
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.30-ARCH
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel __SMP__: yes
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [drm] register handle = 0x000cf000
(II) fglrx(0): Display width adjusted to to 2816 due to alignment constraints
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x0106a000
(II) fglrx(0): FBMM initialized for area (0,0)-(2816,1528)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(2816,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 2816 x 504
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(II) fglrx(0): DPMS enabled
(**) fglrx(0): Textured Video is enabled.
(II) LoadModule: "glesx"
(II) Loading /usr/lib/xorg/modules//glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension GLESX
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.4.99.906, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(==) fglrx(0): Using software cursor
(II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(WW) AIGLX: 3D driver claims to not support visual 0x33
(WW) AIGLX: 3D driver claims to not support visual 0x34
(WW) AIGLX: 3D driver claims to not support visual 0x35
(WW) AIGLX: 3D driver claims to not support visual 0x36
(WW) AIGLX: 3D driver claims to not support visual 0x37
(WW) AIGLX: 3D driver claims to not support visual 0x38
(WW) AIGLX: 3D driver claims to not support visual 0x39
(WW) AIGLX: 3D driver claims to not support visual 0x3a
(WW) AIGLX: 3D driver claims to not support visual 0x3b
(WW) AIGLX: 3D driver claims to not support visual 0x3c
(WW) AIGLX: 3D driver claims to not support visual 0x3d
(WW) AIGLX: 3D driver claims to not support visual 0x3e
(WW) AIGLX: 3D driver claims to not support visual 0x3f
(WW) AIGLX: 3D driver claims to not support visual 0x40
(WW) AIGLX: 3D driver claims to not support visual 0x41
(WW) AIGLX: 3D driver claims to not support visual 0x42
(WW) AIGLX: 3D driver claims to not support visual 0x43
(WW) AIGLX: 3D driver claims to not support visual 0x44
(WW) AIGLX: 3D driver claims to not support visual 0x45
(WW) AIGLX: 3D driver claims to not support visual 0x46
(WW) AIGLX: 3D driver claims to not support visual 0x47
(WW) AIGLX: 3D driver claims to not support visual 0x48
(WW) AIGLX: 3D driver claims to not support visual 0x49
(WW) AIGLX: 3D driver claims to not support visual 0x4a
(WW) AIGLX: 3D driver claims to not support visual 0x4b
(WW) AIGLX: 3D driver claims to not support visual 0x4c
(WW) AIGLX: 3D driver claims to not support visual 0x4d
(WW) AIGLX: 3D driver claims to not support visual 0x4e
(WW) AIGLX: 3D driver claims to not support visual 0x4f
(WW) AIGLX: 3D driver claims to not support visual 0x50
(WW) AIGLX: 3D driver claims to not support visual 0x51
(WW) AIGLX: 3D driver claims to not support visual 0x52
(WW) AIGLX: 3D driver claims to not support visual 0x53
(WW) AIGLX: 3D driver claims to not support visual 0x54
(WW) AIGLX: 3D driver claims to not support visual 0x55
(WW) AIGLX: 3D driver claims to not support visual 0x56
(WW) AIGLX: 3D driver claims to not support visual 0x57
(WW) AIGLX: 3D driver claims to not support visual 0x58
(WW) AIGLX: 3D driver claims to not support visual 0x59
(WW) AIGLX: 3D driver claims to not support visual 0x5a
(WW) AIGLX: 3D driver claims to not support visual 0x5b
(WW) AIGLX: 3D driver claims to not support visual 0x5c
(WW) AIGLX: 3D driver claims to not support visual 0x5d
(WW) AIGLX: 3D driver claims to not support visual 0x5e
(WW) AIGLX: 3D driver claims to not support visual 0x5f
(WW) AIGLX: 3D driver claims to not support visual 0x60
(WW) AIGLX: 3D driver claims to not support visual 0x61
(WW) AIGLX: 3D driver claims to not support visual 0x62
(WW) AIGLX: 3D driver claims to not support visual 0x63
(WW) AIGLX: 3D driver claims to not support visual 0x64
(WW) AIGLX: 3D driver claims to not support visual 0x65
(WW) AIGLX: 3D driver claims to not support visual 0x66
(WW) AIGLX: 3D driver claims to not support visual 0x67
(WW) AIGLX: 3D driver claims to not support visual 0x68
(WW) AIGLX: 3D driver claims to not support visual 0x69
(WW) AIGLX: 3D driver claims to not support visual 0x6a
(WW) AIGLX: 3D driver claims to not support visual 0x6b
(WW) AIGLX: 3D driver claims to not support visual 0x6c
(WW) AIGLX: 3D driver claims to not support visual 0x6d
(WW) AIGLX: 3D driver claims to not support visual 0x6e
(WW) AIGLX: 3D driver claims to not support visual 0x6f
(WW) AIGLX: 3D driver claims to not support visual 0x70
(WW) AIGLX: 3D driver claims to not support visual 0x71
(WW) AIGLX: 3D driver claims to not support visual 0x72
(II) AIGLX: Loaded and initialized /usr/lib/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 381 x 238
(II) config/hal: Adding input device ThinkPad Extra Buttons
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 2.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) ThinkPad Extra Buttons: always reports core events
(**) ThinkPad Extra Buttons: Device: "/dev/input/event6"
(II) ThinkPad Extra Buttons: Found keys
(II) ThinkPad Extra Buttons: Configuring as keyboard
(II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,no"
(**) Option "xkb_options" "grp:alt_shift_toggle"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event8"
(II) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
(**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
(**) TPPS/2 IBM TrackPoint: (accel) filter chain progression: 2.00
(**) TPPS/2 IBM TrackPoint: (accel) filter stage 0: 20.00 ms
(**) TPPS/2 IBM TrackPoint: (accel) set acceleration profile 0
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event9"
(II) Logitech USB Receiver: Found 20 mouse buttons
(II) Logitech USB Receiver: Found x and y relative axes
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Configuring as mouse
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
(**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
(**) Logitech USB Receiver: (accel) filter chain progression: 2.00
(**) Logitech USB Receiver: (accel) filter stage 0: 20.00 ms
(**) Logitech USB Receiver: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,no"
(**) Option "xkb_options" "grp:alt_shift_toggle"
(II) config/hal: Adding input device Logitech USB Receiver
(**) Logitech USB Receiver: always reports core events
(**) Logitech USB Receiver: Device: "/dev/input/event10"
(II) Logitech USB Receiver: Found 1 mouse buttons
(II) Logitech USB Receiver: Found scroll wheel(s)
(II) Logitech USB Receiver: Found keys
(II) Logitech USB Receiver: Configuring as keyboard
(II) Logitech USB Receiver: Adding scrollwheel support
(**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
(**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,no"
(**) Option "xkb_options" "grp:alt_shift_toggle"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us,no"
(**) Option "xkb_options" "grp:alt_shift_toggle"
(II) fglrx(0): EDID vendor "LEN", prod id 16438
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
(II) fglrx(0): EDID vendor "LEN", prod id 16438
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 101.60 1440 1488 1520 1824 900 903 909 926 -hsync -vsync (55.7 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 85.60 1440 1488 1520 1848 900 903 909 926 -hsync -vsync (46.3 kHz)
Last edited by orjanp (2009-08-12 08:43:13)

Windows 7 Clients Not Working With Web-Auth

I am using 5508 controllers, configured for WEB-AUTH passthrough, Windows XP clients work fine but Windows 7 clients are hit and miss getting redirected to the splash screen.
The login page is customised showing T's & C's with two buttons Except or Reject.
Do I need to Pre-Auth with ACL's? Has anyone had similar issues, or any good doc's etc.
Thanks in advance for any replies.
Jay

Nicolas,
Many thanks for your relpy, the problem is that this is a guest network that's also avalable to the public and I dont have any control over the end clients.
After doing a quick search on the net I found this.
NCSI : Uses a combination of DNS and/or HTTP look ups to tell if you are connected to the Internet. The way NCSI does this is either via a HTTP request for http://www.msftncsi.com/ncsi.txt or a DNS look up for dns.msftncsi.com that resovles to 131.107.255.255.
NCSI does this whether you are logged on or not.
Do I need to Create a Preauthentication ACL on the Guest WLAN interface:-
Configure a preauthentication ACL on the WLAN to allow wireless clients to allow:-
1. Permit DNS resolution (UDP/53) to 213.199.181.90
2. Permit TCP port 80 to 131.107.255.255
Jay

Firefox Sync not working with weave server behind password protected proxy

Since the sync is moved from firefox to Android, I'm completely unable to sync my bookmarks with my personal weave server. The server is internal, but accessible via a proxy with a username/password for all internal sites. Last working version was 10.0.5, all newer versions have this problem. I've just reinstalled the ancient version, as I now need the bookmarks. First syncing in 10.0.5 and then upgrading to anything newer makes all previous synced data unavailable. BTW the newef versions will let you add other devices to the same sync account (on the internal server), but it just complete refuses to collect any data at all from the server. (I don't even see any attempts in the logging of the proxy server)
I'm unable to get debug info, as I don't have a google account (don't trust them) and can't run SDK or other non-standard tools on my company phone.
The phone in question is a Samsung Galaxy S2, latest software version (Android 4.04) Is there a way to get firefox doing the sync? (As Android just can't handle this)

Why in the pastebin in the debugging line is the version of sync the older one:
1407393996002 Sync.Service DEBUG User-Agent: Firefox/33.0a2 FxSync/1.35.0.20140806004002.
More info on self hosting can be found here: [https://blog.mozilla.org/services/2014/05/08/firefox-accounts-sync-1-5-and-self-hosting/] where you can also ask this in the #sync IRC channel or [https://mail.mozilla.org/listinfo/sync-dev] join the dev mailing list to get a more technical answer.
Are you using the first method? Where the Firefox server is the authenticating server and the hosted server is your own?
It fails to login because it flags it already has a token, but 401 failed to Get the collections at your server, these are strange errors and I am not an expert, please do ask your question in the mailing list, the technical eye will be able to catch the issue much quicker.

Certificate request not working with web server v2 template on windows 2012 R2

Similar Messages

Maybe you are looking for