Certificate Trust (Pinning) disabled after silent installation
When we install EMET 4.1 (MSIEXEC.exe /qb!- /i "EMET Setup.msi" ALLUSERS=1 REBOOT=REALLYSUPPRESS) and import te Popular Software.xml and CertTrust.xml settings with EMET_Conf.exe the Quick Profile Name is set to custom Security setting and the
Certificate Trust (Pinning) option is disabled. The import of the CertTrust.xml worked because the pinning rules en protected websites are visible.
How can we use the Recommended Security Settings and enable the Certificate Trust (Pinning) option after installation? I tried to use a Group Policy but there are no group policy settings for the Certificate Trust (Pinning) option.
Has someone else experienced this and how cal we solve this?
Regards,
RK
The Group Policy settings for EMET 5.0 look the same as those for EMET 4.1. The 'problem' that is the system mitigation Certificate Trust (Pinning) is disabled after a silent installation is not (yet) fixed in EMET 5.0 technical preview. On the other hand
I found out that "EMET_CONF.exe --system Pinning=Enbled" enables the system mitigation Certificate Trust (Pinning). The Quick Profile Name remains set to custom Security setting but I guess that's the settings are te same as Recommended Security Settings.
Regards,
RK
Similar Messages
-
Certificate Trust (pinning rules) not work.
Windows 7 SP1 x86, EMET 4.1 U1, IE 11
Stopped working function Certificate Trust (pinning rules).
There are no reports of EMET_Agent you visit the site
that has expired rules. There is only
the message to Event Viewer. How do I fix
this problem to EMET_Agent reported
expired rule at the entrance to the site? -
Alert after silent installation of Essbase excel add-in
Hi,
We have to deploy excel add-in for many users , so we are planning to do it using the silent installation.We succeded in recording the resonse file and running the silent installation. But problem is we are not getting any alert after the instaltion is complete.Only way is we need to go into All Programs, where in it is showing that some new programs are installed.
Could you please suggest us a way for getting an alert message either in the command prompt(from where we run the silent installation) or in the form of a pop-up.
Regards
PratThe Excel addin has the most versitility for reporting and adhoc analysis. You can do things in it that you can't do with Web analysis. Pleus paower users who have a good knowledge of Excel prefer working in excel than on the web
-
Uninstall Labview after Silently installation
I installed Labview 7.1 using the silently installation and I need to do an uninstall like this (Using a .BAT file), for the Silently installation I used the Spec files attached.
In order to have a complete custom installation I also had to run separate the device drivers setup with its own spec file.
I already tried to uninstall using this same spec files changing for each feature to = Absent (This is suppose to remove if installed) but it doesn't completely uninstall. The Data Socket and the NI Spy remain.
Thank you in advance
Attachments:
LVspec.txt 1 KBHello EJPEREZ,
After further investigation, it appears that DataSocket is still present on the system because the LabVIEW Runtime Engine is still installed. To verify this, open the control panel, double-click on add/remove programs, select National Instruments Software, click on change and you will see a list of National Instruments Software that is installed on the computer. You can use this method to find out which NI Software product is leaving NI Spy on your computer as well.
Uninstalling the LabVIEW Runtime Engine will remove DataSocket from your computer. The way to do this from the command line is to use msiexec and the LabVIEW Runtime Engine MSI file. The command will look something like "path:\>msiexec /quiet /uninstall lvruntimeeng.msi" depending on your preferences and file locations. MSIexec is a Microsoft Windows utility and you can get more information about it on there website (http://www.microsoft.com). If you need more information about the commmand line parameters for msiexec, just type in "msiexec" in the command line and hit the "enter" key. The LabVIEW Runtime Engine msi can be found on your installation cd in the "components\lvruntimeeng\" folder.
Make sure you run this command AFTER you do the core uninstallation using the "setup.exe LVspect.txt /q" operation. Then you can use msiexec to uninstall the program that is leaving NI Spy on your computer.
I hope this helps,
E.Lee
Applications Engineer
National Instruments
Eric
DE For Life! -
We have about 1,800 workstations running Windows 7 (both 32-bit and 64-bit) running various versions of the Java JRE from 6 update 32 through 7 update 51. Most are on 6 update 45. We would like to standardize on Java 7 update 51 (32-bit) and get everyone updated to that version for security reasons.
For the past two weeks, we have been having trouble with our installation pre-pilot. What we are seeing is that our procedure successfully closes any open Internet Explorer windows and Java-related processes, uninstalls all old versions of the Java JRE, and then claims to have successfully installed Java 7 update 51. The Java Control panel works. We can even take Internet Explorer to Verify Java Version or Java Tester - What Version of Java Are You Running? and confirm that the Java applets on those sites are loading (though the latter only works after adding the site to the exceptions site list); however, when testers try to access our Kronos Workforce Central 6.3.10 system, the Java applets used by that system do not load.
We have tried the following things, none of which worked:
Clear Internet Explorer browser cache and cookies.
Clear the local Java cache.
Reboot the computer.
Reset Internet Explorer settings, including personal settings.
The one thing which does work is going into the Java Control Panel, going to the Security tab, unchecking "Enable Java content in the browser", pressing Apply, pressing OK on the pop-up window, checking the "Enable Java content in the browser" box again, pressing OK, pressing OK on the pop-up window, and then restarting Internet Explorer. It is only after this point that all Java applets, including the ones used by Kronos Workforce Central 6.3.10, work.
What I need to know is how I can automate the procedure of reinitializing the "Enable Java content in the browser" checkbox after installation or am I doing something wrong or missing a step in the automated installation that is causing this to happen?
We are using Microsoft SCCM 2007 R3 to accomplish this upgrade, and everything is being run on the client machine using the SYSTEM account. First, the PowerShell script "javaclean.ps1" is run, with part of the command-line process changing the PowerShell script execution policy to Bypass. This script handles the closing of Java-dependent applications and Java processes and uninstalls old Java versions.
javaclean.ps1:
#Find all Java products excluding the auto updater which actually gets uninstalled when the main install is removed.
write-host "Searching for all installed Java versions" -ForegroundColor Yellow
[array]$javas=Get-WmiObject -query "select * from win32_Product where (Name like 'Java %' or Name like 'Java(TM)%' or Name like 'J2SE%') and Name <> 'Java Auto Updater'"
if ($javas.count -gt 0)
write-host "Java is already Installed" -ForegroundColor Yellow
#Get all the Java processes and kill them. If java is running and the processes aren't killed then this script will invoke a sudden reboot.
[array]$processes=Get-Process -Name "Java*" #-erroraction silentlycontinue
$processes += Get-Process -Name "iexplore" #-erroraction silentlycontinue
$processes += Get-Process -Name "firefox" #-erroraction silentlycontinue
$processes += Get-Process -Name "chrome" #-erroraction silentlycontinue
$processes += Get-Process -Name "jqs" #-erroraction silentlycontinue
$processes += Get-Process -Name "jusched" #-erroraction silentlycontinue
$processes += Get-Process -Name "jp2launcher" #-erroraction silentlycontinue
if ($processes.Count -gt 0)
foreach ($myprocess in $processes)
$myprocess.kill()
#Loop through the installed Java products.
foreach($java in $javas){
write-host "Uninstalling "$java.name -ForegroundColor Yellow
$java.Uninstall()
After this script is complete, SCCM calls a the VBS script "install.vbs" to perform the actual installation of Java JRE 7 update 51.
install.vbs
'* Script: Install JRE 7 routine
'* Date: 3/14/14
'* Author: [REDACTED]
'* Rev: 1.0
'* Notes:
'/// Common
Set objFSO = CreateObject("Scripting.FileSystemObject")
Set objWshShell = CreateObject("WScript.Shell")
' Get system architecture
Dim colSys : Set colSys = GetObject("WinMGMTS://").ExecQuery("SELECT AddressWidth FROM Win32_Processor",, 48)
Dim objSys
For Each objSys In colSys
If objSys.AddressWidth = 64 Then bolIs64Bit = True
Next
' Get operating system
Dim colOS : Set colOS = GetObject("WinMGMTS://").ExecQuery ("Select * from Win32_OperatingSystem",,48)
Dim objOS
For Each objOS In colOS
If Left(objOS.caption, 20) = "Microsoft Windows 8 " Then
bolIsWin8 = True
WScript.Echo "win8"
End If
If Left(objOS.caption, 22) = "Microsoft Windows 8.1 " Then
bolIsWin81 = True
WScript.Echo "win81"
End If
Next
' Set 32 bit program files directory
If bolIs64Bit = True Then
strPFILES = "Program Files (x86)"
strSYSDIR = "SysWOW64"
Else strPFILES = "Program Files"
strSYSDIR = "System32"
End If
' Set windows directory
strWIN = objWshShell.ExpandEnvironmentStrings("%windir%")
' Set the current directory
strCurrentDir = objFSO.GetParentFolderName(Wscript.ScriptFullName)
' Set computer name
strCompName = objWshShell.ExpandEnvironmentStrings("%computername%")
'/// Main script
'/// Install via .msi & capture exit code
'intExitCode = objWshShell.Run("msiexec.exe /i """ & strCurrentDir & "\package.msi""" & " TRANSFORMS=""" & strCurrentDir & _
' "\transform.mst"" ALLUSERS=1 Reboot=ReallySuppress /qn", 8, True)
'wscript.quit(intExitCode)
'****RUN COMMANDS HERE****
' Create folder structure if it doesn't exist already
strFullPath = "c:\Windows\Sun\Java\Deployment" '
' How many levels are there in the path?
nLevel = 0
strParentPath = strFullPath
Do Until strParentPath = ""
strParentPath = objFSO.GetParentFolderName(strParentPath)
nLevel = nLevel + 1
Loop
For iLevel = 1 To nLevel
' Figure out path for directory at level iLevel
strParentPath = strFullPath
For j = 1 To nLevel - iLevel
strParentPath = objFSO.GetParentFolderName(strParentPath)
Next
' Does this directory exist? If not, create it.
If objFSO.FolderExists(strParentPath) = False Then
Set newFolder = objFSO.CreateFolder(strParentPath)
End If
Next
' Kill running processes
objWshShell.Run "taskkill /F /IM iexplore.exe", 8, True
objWshShell.Run "taskkill /F /IM firefox.exe", 8, True
objWshShell.Run "taskkill /F /IM chrome.exe", 8, True
objWshShell.Run "taskkill /F /IM javaw.exe", 8, True
objWshShell.Run "taskkill /F /IM java.exe", 8, True
objWshShell.Run "taskkill /F /IM jqs.exe", 8, True
objWshShell.Run "taskkill /F /IM jusched.exe", 8, True
' Copy deployment files
objFSO.CopyFile strCurrentDir & "\deployment.config", "c:\Windows\Sun\Java\Deployment\", True
objFSO.CopyFile strCurrentDir & "\deployment.properties", "c:\Windows\Sun\Java\Deployment\", True
' Disable UAC
' If bolIsWin8 Or bolIsWin81 = True Then
' objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v PromptOnSecureDesktop /t REG_DWORD /d 0 /f", 8, True
' objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 0 /f", 8, True
' objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v ConsentPromptBehaviorAdmin /t REG_DWORD /d 0 /f", 8, True
' End If
' Install application
intExitCode = objWshShell.Run("msiexec.exe /i """ & strCurrentDir & "\jre1.7.0_51.msi"" IEXPLORER=1 AUTOUPDATECHECK=0 JAVAUPDATE=0 JU=0 WEB_JAVA=1 ALLUSERS=1 Reboot=ReallySuppress /qn", 8, True)
' Enable UAC
' If bolIsWin8 Or bolIsWin81 = True Then
' objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v PromptOnSecureDesktop /t REG_DWORD /d 1 /f", 8, True
' objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v EnableLUA /t REG_DWORD /d 1 /f", 8, True
' objWshShell.Run "reg.exe ADD HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\System /v ConsentPromptBehaviorAdmin /t REG_DWORD /d 5 /f", 8, True
' End If
wscript.quit(intExitCode)
'/// Install via .exe on network
'objWshShell.Run """" & strCurrentDir & "\Setup.exe"" -s -sms -f1""" & strCurrentDir & _
' "\setup.iss"" -f2""" & strWIN & "\Temp\Install-app.txt""", 8, True
' Need to turn off the open file security warning first
Set objEnv = objWshShell.Environment("PROCESS")
objEnv("SEE_MASK_NOZONECHECKS") = 1
' intExitCode = objWshShell.Run("""" & strCurrentDir & "\jre-7u45-windows-i586.exe"" /s /v""/norestart " & _
' "TRANSFORMS=""" & strCurrentDir & "\Tribe-jre7.mst""""", 8, True)
' WScript.Quit(intExitCode)
'****RUN COMMANDS HERE****
' Then turn it back on
objEnv.Remove("SEE_MASK_NOZONECHECKS")
'/// Additional functions
Help on this issue would be much appreciated!It turns out that this is actually a problem with Kronos Workforce Central. We had the "site.java.plugin.CLSID.familyVersion" setting in that application set to "clsid:CAFEEFAC-0016-0000-FFFF-ABCDEFFEDCBA", which is the Java CLSID for Java 6. After updating this value to "clsid:8AD9C840-044E-11D1-B3E9-00805F499D93" (the Java universal CLSID), this problem did not occur upon the automatic upgrade of Java.
We have both Java 6 and Java 7 in our environment, and did during our Kronos implementation, so I don't know why we were using the Java 6 CLSID in the first place.
Case closed! -
Adobe Help 4.0.244 - disable update during silent installation
Hello
I am looking for swichtes to disable updates in silent installation mode. I have just discovery that application store file settings in appdata folder and I need to change contentUpdateAvailable=false. But I want to make apply this setting during silent installation..There is any available option?
For now I prepering active setup solution but this is not perfect
thanks for helpYou may find more info in the TCS Installation forum
-
Iphone 4s disabled after incorrect pin code
iphone 4s disabled after incorrect pin code. Its telling me to connect to itunes but even wen connected to itunes its telling it cannot connect as its locked with a passcode. I haVE forgotten it. I have gone and deleted it ov my icloud but its not doing anything other than Emergency calls only. How do i reset my fone to factory settings then input my apple id (one regd with apple)
o/s its all up to date with software etc as its usually syned with Ipad 2 (which is currently getting screen repaired)iOS: Forgotten passcode or device disabled after ... - Support - Apple
-
Windows standby feature disabled after lookout 4.5.1 b18 installation
I am just upgrading my development system - using an HP8510w running Windows XP professional. Haing the need to support some legacy systems in Lookout 4.5.1, I am having to install this software as well as the more recent Lookout 6.1. On installing 4.5 only, after the installation the standby feature on the laptop disappeared. Does anyone have an ideas what might have caused this? I have tried a number of options, of which I am getting now where. Any help would be appreciated.
IanDid you install the NI Keyboard Driver with Lookout 4.5? I'm not sure if it is installed with 4.5 by default.
This driver will cause a similar problem. So try to modify the 4.5, if the driver is installed, remove it.
Ryan Shi
National Instruments -
Iphone disabled after 7.1.2
Hi, I had never used an access code on my iphone 4 when I ordered it last week to install update 7.1.2. After the installation I pressed the bottom front button and got a screen that asked for an access code. Innocently I entered a 4 digit code that I often use for other things. When that didn't work I entered the pin code of the SIM card, then another pincode, then again the code I had entered first. Alas, nothing works and now my Iphone is disabled and unfortunately I have never made a back up, not because I didn't want, but because I didn't know I had to. Who can help: I DON'T WANT TO LOSE EVERYTHING STORED ON MY PHONE...?
Restore again from Recover Mode:
If you can't update or restore your iOS device -
Database is not starting after RAC installation
Hi All,
I have installed 10g R2 2-node RAC on RHEL4 without any problem. But after the installation the database is not starting and i'm not able to connect. It is showing the below error..
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Can anybody help what might be the problem?
Thanks,
PraveenHi,
I'm giving the contents of alter log file from the first node...
Mon Feb 19 16:45:59 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Shared memory segment for instance monitoring created
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =36
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
sga_target = 1073741824
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database_instances= 1
db_create_file_dest = +ORCL_DATA1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 16:46:00 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=31282
DIAG started with pid=3, OS id=31284
PSP0 started with pid=4, OS id=31286
LMON started with pid=5, OS id=31300
LMD0 started with pid=6, OS id=31315
MMAN started with pid=7, OS id=31317
DBW0 started with pid=8, OS id=31319
LGWR started with pid=9, OS id=31321
CKPT started with pid=10, OS id=31323
SMON started with pid=11, OS id=31325
RECO started with pid=12, OS id=31327
CJQ0 started with pid=13, OS id=31329
MMON started with pid=14, OS id=31331
Mon Feb 19 16:46:00 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=15, OS id=31333
Mon Feb 19 16:46:00 2007
starting up 1 shared server(s) ...
Mon Feb 19 16:46:00 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 16:46:01 2007
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Resources and enqueues cleaned out
Resources remastered 0
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Reconfiguration complete
Mon Feb 19 16:46:01 2007
CREATE DATABASE "bsaprod"
MAXINSTANCES 32
MAXLOGHISTORY 1
MAXLOGFILES 192
MAXLOGMEMBERS 3
MAXDATAFILES 1024
DATAFILE SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
SYSAUX DATAFILE SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
SMALLFILE UNDO TABLESPACE "UNDOTBS1" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
CHARACTER SET WE8ISO8859P1
NATIONAL CHARACTER SET AL16UTF16
LOGFILE GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K
USER SYS IDENTIFIED BY *USER SYSTEM IDENTIFIED BY
Mon Feb 19 16:46:01 2007
Starting background process ASMB
ASMB started with pid=19, OS id=31365
Starting background process RBAL
RBAL started with pid=20, OS id=31369
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 16:46:05 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 16:46:06 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 16:46:06 2007
Database mounted in Exclusive Mode
Mon Feb 19 16:46:09 2007
Successful mount of redo thread 1, with mount id 3309011657
Assigning activation ID 3309011657 (0xc53b82c9)
Thread 1 opened at log sequence 1
Current log# 1 seq# 1 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 16:46:09 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 16:46:09 2007
SMON: enabling cache recovery
Mon Feb 19 16:46:09 2007
create tablespace SYSTEM datafile SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL online
Mon Feb 19 16:46:20 2007
Completed: create tablespace SYSTEM datafile SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL online
Mon Feb 19 16:46:20 2007
create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Completed: create rollback segment SYSTEM tablespace SYSTEM
storage (initial 50K next 50K)
Mon Feb 19 16:46:24 2007
CREATE SMALLFILE UNDO TABLESPACE UNDOTBS1 DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Feb 19 16:46:31 2007
Successfully onlined Undo Tablespace 1.
Completed: CREATE SMALLFILE UNDO TABLESPACE UNDOTBS1 DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Feb 19 16:46:31 2007
create tablespace SYSAUX datafile SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
Completed: create tablespace SYSAUX datafile SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO online
Mon Feb 19 16:46:36 2007
CREATE SMALLFILE TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
Completed: CREATE SMALLFILE TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
Mon Feb 19 16:46:36 2007
ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP
Completed: ALTER DATABASE DEFAULT TEMPORARY TABLESPACE TEMP
Mon Feb 19 16:46:36 2007
ALTER DATABASE DEFAULT TABLESPACE SYSTEM
Completed: ALTER DATABASE DEFAULT TABLESPACE SYSTEM
Mon Feb 19 16:46:38 2007
SMON: enabling tx recovery
Mon Feb 19 16:46:39 2007
Threshold validation cannot be done before catproc is loaded.
Threshold validation cannot be done before catproc is loaded.
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=22, OS id=32303
Mon Feb 19 16:46:39 2007
Completed: CREATE DATABASE "bsaprod"
MAXINSTANCES 32
MAXLOGHISTORY 1
MAXLOGFILES 192
MAXLOGMEMBERS 3
MAXDATAFILES 1024
DATAFILE SIZE 300M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
EXTENT MANAGEMENT LOCAL
SYSAUX DATAFILE SIZE 120M AUTOEXTEND ON NEXT 10240K MAXSIZE UNLIMITED
SMALLFILE DEFAULT TEMPORARY TABLESPACE TEMP TEMPFILE SIZE 20M AUTOEXTEND ON NEXT 640K MAXSIZE UNLIMITED
SMALLFILE UNDO TABLESPACE "UNDOTBS1" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
CHARACTER SET WE8ISO8859P1
NATIONAL CHARACTER SET AL16UTF16
LOGFILE GROUP 1 SIZE 51200K,
GROUP 2 SIZE 51200K
USER SYS IDENTIFIED BY *USER SYSTEM IDENTIFIED BY
Mon Feb 19 16:46:39 2007
CREATE SMALLFILE UNDO TABLESPACE "UNDOTBS2" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Completed: CREATE SMALLFILE UNDO TABLESPACE "UNDOTBS2" DATAFILE SIZE 200M AUTOEXTEND ON NEXT 5120K MAXSIZE UNLIMITED
Mon Feb 19 16:46:46 2007
CREATE SMALLFILE TABLESPACE "USERS" LOGGING DATAFILE SIZE 5M AUTOEXTEND ON NEXT 1280K MAXSIZE UNLIMITED EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO
Completed: CREATE SMALLFILE TABLESPACE "USERS" LOGGING DATAFILE SIZE 5M AUTOEXTEND ON NEXT 1280K MAXSIZE UNLIMITED EXTENT MANAGEMENT LOCAL SEGMENT SPACE MANAGEMENT AUTO
Mon Feb 19 16:46:46 2007
ALTER DATABASE DEFAULT TABLESPACE "USERS"
Completed: ALTER DATABASE DEFAULT TABLESPACE "USERS"
Mon Feb 19 16:47:05 2007
Thread 1 advanced to log sequence 2
Current log# 2 seq# 2 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:47:34 2007
Thread 1 cannot allocate new log, sequence 3
Checkpoint not complete
Current log# 2 seq# 2 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 3
Current log# 1 seq# 3 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:48:10 2007
Thread 1 cannot allocate new log, sequence 4
Checkpoint not complete
Current log# 1 seq# 3 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 4
Current log# 2 seq# 4 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:49:05 2007
Thread 1 cannot allocate new log, sequence 5
Checkpoint not complete
Current log# 2 seq# 4 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 5
Current log# 1 seq# 5 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:50:19 2007
Thread 1 cannot allocate new log, sequence 6
Checkpoint not complete
Current log# 1 seq# 5 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 6
Current log# 2 seq# 6 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:51:00 2007
Thread 1 cannot allocate new log, sequence 7
Checkpoint not complete
Current log# 2 seq# 6 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 7
Current log# 1 seq# 7 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:51:54 2007
Thread 1 cannot allocate new log, sequence 8
Checkpoint not complete
Current log# 1 seq# 7 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 8
Current log# 2 seq# 8 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:55:32 2007
Thread 1 cannot allocate new log, sequence 9
Checkpoint not complete
Current log# 2 seq# 8 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 9
Current log# 1 seq# 9 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:56:35 2007
Thread 1 cannot allocate new log, sequence 10
Checkpoint not complete
Current log# 1 seq# 9 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 10
Current log# 2 seq# 10 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:56:52 2007
Thread 1 cannot allocate new log, sequence 11
Checkpoint not complete
Current log# 2 seq# 10 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 11
Current log# 1 seq# 11 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:57:04 2007
Thread 1 cannot allocate new log, sequence 12
Checkpoint not complete
Current log# 1 seq# 11 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 12
Current log# 2 seq# 12 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:57:14 2007
Thread 1 cannot allocate new log, sequence 13
Checkpoint not complete
Current log# 2 seq# 12 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 13
Current log# 1 seq# 13 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:57:31 2007
Thread 1 cannot allocate new log, sequence 14
Checkpoint not complete
Current log# 1 seq# 13 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 14
Current log# 2 seq# 14 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 16:58:13 2007
Thread 1 cannot allocate new log, sequence 15
Checkpoint not complete
Current log# 2 seq# 14 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 15
Current log# 1 seq# 15 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 16:59:42 2007
Thread 1 cannot allocate new log, sequence 16
Checkpoint not complete
Current log# 1 seq# 15 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 16
Current log# 2 seq# 16 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:00:33 2007
Thread 1 cannot allocate new log, sequence 17
Checkpoint not complete
Current log# 2 seq# 16 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 17
Current log# 1 seq# 17 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:01:49 2007
Thread 1 cannot allocate new log, sequence 18
Checkpoint not complete
Current log# 1 seq# 17 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 18
Current log# 2 seq# 18 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:02:23 2007
Thread 1 cannot allocate new log, sequence 19
Checkpoint not complete
Current log# 2 seq# 18 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 19
Current log# 1 seq# 19 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:04:06 2007
Thread 1 cannot allocate new log, sequence 20
Checkpoint not complete
Current log# 1 seq# 19 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 20
Current log# 2 seq# 20 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:05:22 2007
Thread 1 cannot allocate new log, sequence 21
Checkpoint not complete
Current log# 2 seq# 20 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 21
Current log# 1 seq# 21 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:06:22 2007
Thread 1 cannot allocate new log, sequence 22
Checkpoint not complete
Current log# 1 seq# 21 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 22
Current log# 2 seq# 22 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:08:42 2007
Thread 1 cannot allocate new log, sequence 23
Checkpoint not complete
Current log# 2 seq# 22 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 23
Current log# 1 seq# 23 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:09:43 2007
Thread 1 cannot allocate new log, sequence 24
Checkpoint not complete
Current log# 1 seq# 23 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 24
Current log# 2 seq# 24 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:10:42 2007
Thread 1 cannot allocate new log, sequence 25
Checkpoint not complete
Current log# 2 seq# 24 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 25
Current log# 1 seq# 25 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:11:31 2007
Thread 1 cannot allocate new log, sequence 26
Checkpoint not complete
Current log# 1 seq# 25 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 26
Current log# 2 seq# 26 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:12:01 2007
Thread 1 cannot allocate new log, sequence 27
Checkpoint not complete
Current log# 2 seq# 26 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 27
Current log# 1 seq# 27 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:13:12 2007
Thread 1 cannot allocate new log, sequence 28
Checkpoint not complete
Current log# 1 seq# 27 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 28
Current log# 2 seq# 28 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:14:05 2007
Thread 1 cannot allocate new log, sequence 29
Checkpoint not complete
Current log# 2 seq# 28 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 29
Current log# 1 seq# 29 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:14:57 2007
Thread 1 cannot allocate new log, sequence 30
Checkpoint not complete
Current log# 1 seq# 29 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Thread 1 advanced to log sequence 30
Current log# 2 seq# 30 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Mon Feb 19 17:16:29 2007
Thread 1 cannot allocate new log, sequence 31
Checkpoint not complete
Current log# 2 seq# 30 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_2.258.614969167
Thread 1 advanced to log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Mon Feb 19 17:17:54 2007
Starting background process EMN0
EMN0 started with pid=25, OS id=15651
Mon Feb 19 17:17:54 2007
Shutting down instance: further logons disabled
Mon Feb 19 17:17:55 2007
Stopping background process QMNC
Mon Feb 19 17:17:55 2007
Stopping background process CJQ0
Mon Feb 19 17:17:57 2007
Stopping background process MMNL
Mon Feb 19 17:17:58 2007
Stopping background process MMON
Mon Feb 19 17:17:59 2007
Shutting down instance (immediate)
License high water mark = 1
Mon Feb 19 17:17:59 2007
Stopping Job queue slave processes
Mon Feb 19 17:17:59 2007
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Mon Feb 19 17:18:01 2007
ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:01 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Feb 19 17:18:03 2007
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Thread 1 closed at log sequence 31
Successful close of redo thread 1
Mon Feb 19 17:18:04 2007
Completed: ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:04 2007
ALTER DATABASE DISMOUNT
Mon Feb 19 17:18:04 2007
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 17:18:04 2007
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Feb 19 17:18:09 2007
freeing rdom 0
Mon Feb 19 17:18:12 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =36
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
sga_target = 1073741824
control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database_instances= 1
db_create_file_dest = +ORCL_DATA1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 17:18:13 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=16124
DIAG started with pid=3, OS id=16126
PSP0 started with pid=4, OS id=16128
LMON started with pid=5, OS id=16130
LMD0 started with pid=6, OS id=16132
MMAN started with pid=7, OS id=16134
DBW0 started with pid=8, OS id=16136
LGWR started with pid=9, OS id=16138
CKPT started with pid=10, OS id=16140
SMON started with pid=11, OS id=16142
RECO started with pid=12, OS id=16144
CJQ0 started with pid=13, OS id=16146
MMON started with pid=14, OS id=16148
Mon Feb 19 17:18:13 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=15, OS id=16150
Mon Feb 19 17:18:13 2007
starting up 1 shared server(s) ...
Mon Feb 19 17:18:13 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 17:18:14 2007
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Resources and enqueues cleaned out
Resources remastered 0
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Reconfiguration complete
Mon Feb 19 17:18:14 2007
ALTER DATABASE MOUNT
Mon Feb 19 17:18:14 2007
Starting background process ASMB
ASMB started with pid=19, OS id=16182
Starting background process RBAL
RBAL started with pid=20, OS id=16186
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 17:18:18 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 17:18:23 2007
Setting recovery target incarnation to 1
Mon Feb 19 17:18:23 2007
Successful mount of redo thread 1, with mount id 3309012054
Mon Feb 19 17:18:23 2007
Database mounted in Exclusive Mode
Completed: ALTER DATABASE MOUNT
Mon Feb 19 17:18:23 2007
alter database archivelog
Completed: alter database archivelog
Mon Feb 19 17:18:23 2007
alter database open
Mon Feb 19 17:18:23 2007
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=22, OS id=16393
Mon Feb 19 17:18:23 2007
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=23, OS id=16395
Mon Feb 19 17:18:23 2007
Thread 1 opened at log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 17:18:23 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 17:18:23 2007
SMON: enabling cache recovery
Mon Feb 19 17:18:23 2007
ARC0: STARTING ARCH PROCESSES
Mon Feb 19 17:18:23 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Feb 19 17:18:23 2007
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=24, OS id=16422
Mon Feb 19 17:18:23 2007
Successfully onlined Undo Tablespace 1.
Mon Feb 19 17:18:23 2007
SMON: enabling tx recovery
Mon Feb 19 17:18:23 2007
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=25, OS id=16449
Mon Feb 19 17:18:25 2007
Completed: alter database open
Mon Feb 19 17:18:25 2007
ALTER DATABASE ADD LOGFILE THREAD 2 GROUP 3 SIZE 51200K,
GROUP 4 SIZE 51200K
Completed: ALTER DATABASE ADD LOGFILE THREAD 2 GROUP 3 SIZE 51200K,
GROUP 4 SIZE 51200K
Mon Feb 19 17:18:28 2007
ALTER DATABASE ENABLE PUBLIC THREAD 2
Completed: ALTER DATABASE ENABLE PUBLIC THREAD 2
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:18:29 2007
Starting background process EMN0
EMN0 started with pid=26, OS id=16564
Mon Feb 19 17:18:29 2007
Shutting down instance: further logons disabled
Mon Feb 19 17:18:29 2007
Stopping background process QMNC
Mon Feb 19 17:18:29 2007
Stopping background process CJQ0
Mon Feb 19 17:18:30 2007
Stopping background process MMNL
Mon Feb 19 17:18:31 2007
Stopping background process MMON
Mon Feb 19 17:18:32 2007
Shutting down instance (immediate)
License high water mark = 3
Mon Feb 19 17:18:32 2007
Stopping Job queue slave processes
Mon Feb 19 17:18:32 2007
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Mon Feb 19 17:18:34 2007
ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:34 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Feb 19 17:18:34 2007
Shutting down archive processes
Archiving is disabled
Mon Feb 19 17:18:39 2007
ARCH shutting down
ARC2: Archival stopped
Mon Feb 19 17:18:44 2007
ARCH shutting down
ARC1: Archival stopped
Mon Feb 19 17:18:49 2007
ARCH shutting down
ARC0: Archival stopped
Mon Feb 19 17:18:50 2007
Thread 1 closed at log sequence 31
Successful close of redo thread 1
Mon Feb 19 17:18:51 2007
Completed: ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:18:51 2007
ALTER DATABASE DISMOUNT
Mon Feb 19 17:18:51 2007
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 17:18:51 2007
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Feb 19 17:18:56 2007
freeing rdom 0
Mon Feb 19 17:18:59 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
spfile = +BSA_DATA1/bsaprod/spfilebsaprod.ora
sga_target = 1073741824
control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
db_block_size = 8192
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
db_create_file_dest = +ORCL_DATA1
thread = 1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 17:19:00 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=17373
DIAG started with pid=3, OS id=17375
PSP0 started with pid=4, OS id=17377
LMON started with pid=5, OS id=17379
LMD0 started with pid=6, OS id=17381
LMS0 started with pid=7, OS id=17383
LMS1 started with pid=8, OS id=17387
MMAN started with pid=9, OS id=17391
DBW0 started with pid=10, OS id=17393
LGWR started with pid=11, OS id=17395
CKPT started with pid=12, OS id=17397
SMON started with pid=13, OS id=17399
RECO started with pid=14, OS id=17412
CJQ0 started with pid=15, OS id=17428
MMON started with pid=16, OS id=17430
Mon Feb 19 17:19:00 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=17, OS id=17432
Mon Feb 19 17:19:00 2007
starting up 1 shared server(s) ...
Mon Feb 19 17:19:01 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 17:19:01 2007
Reconfiguration started (old inc 0, new inc 2)
List of nodes:
0
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Mon Feb 19 17:19:01 2007
LMS 1: 0 GCS shadows cancelled, 0 closed
Mon Feb 19 17:19:01 2007
LMS 0: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Mon Feb 19 17:19:01 2007
LMS 1: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:19:01 2007
LMS 0: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:19:01 2007
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Fix write in gcs resources
Reconfiguration complete
LCK0 started with pid=20, OS id=17460
Mon Feb 19 17:19:02 2007
ALTER DATABASE MOUNT
Mon Feb 19 17:19:02 2007
This instance was first to mount
Mon Feb 19 17:19:02 2007
Starting background process ASMB
ASMB started with pid=22, OS id=17466
Starting background process RBAL
RBAL started with pid=23, OS id=17470
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 17:19:06 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 17:19:09 2007
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:19:10 2007
Setting recovery target incarnation to 1
Mon Feb 19 17:19:10 2007
Successful mount of redo thread 1, with mount id 3308997510
Mon Feb 19 17:19:10 2007
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Completed: ALTER DATABASE MOUNT
Mon Feb 19 17:19:11 2007
ALTER DATABASE OPEN
This instance was first to open
Picked broadcast on commit scheme to generate SCNs
Mon Feb 19 17:19:11 2007
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=26, OS id=17679
Mon Feb 19 17:19:11 2007
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=27, OS id=17706
Mon Feb 19 17:19:11 2007
Thread 1 opened at log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 17:19:11 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 17:19:11 2007
ARC0: STARTING ARCH PROCESSES
Mon Feb 19 17:19:11 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Feb 19 17:19:11 2007
SMON: enabling cache recovery
Mon Feb 19 17:19:11 2007
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=28, OS id=17708
Mon Feb 19 17:19:11 2007
Successfully onlined Undo Tablespace 1.
Mon Feb 19 17:19:11 2007
SMON: enabling tx recovery
Mon Feb 19 17:19:11 2007
Database Characterset is WE8ISO8859P1
Mon Feb 19 17:19:11 2007
Instance recovery: looking for dead threads
Instance recovery: lock domain invalid but no dead threads
Mon Feb 19 17:19:12 2007
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:19:12 2007
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=29, OS id=17735
Mon Feb 19 17:19:13 2007
Completed: ALTER DATABASE OPEN
Mon Feb 19 17:20:11 2007
Shutting down archive processes
Mon Feb 19 17:20:16 2007
ARCH shutting down
ARC2: Archival stopped
Mon Feb 19 17:23:35 2007
Starting background process EMN0
EMN0 started with pid=74, OS id=28350
Mon Feb 19 17:23:35 2007
Shutting down instance: further logons disabled
Mon Feb 19 17:23:36 2007
Stopping background process QMNC
Mon Feb 19 17:23:36 2007
Stopping background process CJQ0
Mon Feb 19 17:23:38 2007
Stopping background process MMNL
Mon Feb 19 17:23:39 2007
Stopping background process MMON
Mon Feb 19 17:23:40 2007
Shutting down instance (immediate)
License high water mark = 34
Mon Feb 19 17:23:40 2007
Stopping Job queue slave processes
Mon Feb 19 17:23:40 2007
Job queue slave processes stopped
All dispatchers and shared servers shutdown
Mon Feb 19 17:24:07 2007
ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:24:07 2007
SMON: disabling tx recovery
SMON: disabling cache recovery
Mon Feb 19 17:24:08 2007
Shutting down archive processes
Archiving is disabled
Mon Feb 19 17:24:18 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
ARC1: Archiving disabled
ARCH shutting down
Mon Feb 19 17:24:18 2007
ARC1: Archival stopped
Mon Feb 19 17:24:18 2007
ARC0: Becoming the heartbeat ARCH
Mon Feb 19 17:24:18 2007
ARC0: Archiving disabled
ARCH shutting down
ARC0: Archival stopped
Mon Feb 19 17:24:19 2007
Thread 1 closed at log sequence 31
Successful close of redo thread 1
Mon Feb 19 17:24:19 2007
Completed: ALTER DATABASE CLOSE NORMAL
Mon Feb 19 17:24:19 2007
ALTER DATABASE DISMOUNT
Mon Feb 19 17:24:19 2007
SUCCESS: diskgroup ORCL_DATA1 was dismounted
Mon Feb 19 17:24:19 2007
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Mon Feb 19 17:24:25 2007
freeing rdom 0
Mon Feb 19 17:24:35 2007
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 eth1 10.250.90.0 configured from OCR for use as a cluster interconnect
Interface type 1 eth0 10.250.90.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.2.0.
System parameters with non-default values:
processes = 300
sessions = 335
sga_max_size = 1073741824
__shared_pool_size = 255852544
__large_pool_size = 4194304
__java_pool_size = 4194304
__streams_pool_size = 0
spfile = +BSA_DATA1/bsaprod/spfilebsaprod.ora
sga_target = 1073741824
control_files = +ORCL_DATA1/bsaprod/controlfile/current.256.614969167
db_block_size = 8192
__db_cache_size = 801112064
compatible = 10.2.0.2.0
log_archive_dest_1 = LOCATION=+BSA_DATA1/bsaprod/
log_archive_format = %t_%s_%r.dbf
db_file_multiblock_read_count= 16
cluster_database = TRUE
cluster_database_instances= 2
db_create_file_dest = +ORCL_DATA1
thread = 1
instance_number = 1
undo_management = AUTO
undo_tablespace = UNDOTBS1
remote_login_passwordfile= EXCLUSIVE
db_domain =
dispatchers = (PROTOCOL=TCP) (SERVICE=bsaprodXDB)
remote_listener = LISTENERS_BSAPROD
job_queue_processes = 10
background_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/bdump
user_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/udump
core_dump_dest = /u01/app/oracle/oracle/admin/bsaprod/cdump
audit_file_dest = /u01/app/oracle/oracle/admin/bsaprod/adump
db_name = bsaprod
open_cursors = 300
pga_aggregate_target = 262144000
Cluster communication is configured to use the following interface(s) for this instance
10.250.90.107
Mon Feb 19 17:24:35 2007
cluster interconnect IPC version:Oracle UDP/IP (generic)
IPC Vendor 1 proto 2
PMON started with pid=2, OS id=29950
DIAG started with pid=3, OS id=29952
PSP0 started with pid=4, OS id=29954
LMON started with pid=5, OS id=29956
LMD0 started with pid=6, OS id=29958
LMS0 started with pid=7, OS id=29960
LMS1 started with pid=8, OS id=29964
MMAN started with pid=9, OS id=29968
DBW0 started with pid=10, OS id=29970
LGWR started with pid=11, OS id=29972
CKPT started with pid=12, OS id=29974
SMON started with pid=13, OS id=29976
RECO started with pid=14, OS id=29978
CJQ0 started with pid=15, OS id=29980
MMON started with pid=16, OS id=29982
Mon Feb 19 17:24:36 2007
starting up 1 dispatcher(s) for network address '(ADDRESS=(PARTIAL=YES)(PROTOCOL=TCP))'...
MMNL started with pid=17, OS id=29984
Mon Feb 19 17:24:36 2007
starting up 1 shared server(s) ...
Mon Feb 19 17:24:36 2007
lmon registered with NM - instance id 1 (internal mem no 0)
Mon Feb 19 17:24:39 2007
Reconfiguration started (old inc 0, new inc 4)
List of nodes:
0 1
Global Resource Directory frozen
* allocate domain 0, invalid = TRUE
Communication channels reestablished
* domain 0 not valid according to instance 1
* domain 0 valid = 0 according to instance 1
Mon Feb 19 17:24:39 2007
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Mon Feb 19 17:24:39 2007
LMS 1: 0 GCS shadows cancelled, 0 closed
Mon Feb 19 17:24:39 2007
LMS 0: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Mon Feb 19 17:24:39 2007
LMS 0: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:24:39 2007
LMS 1: 0 GCS shadows traversed, 0 replayed
Mon Feb 19 17:24:39 2007
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Fix write in gcs resources
Reconfiguration complete
LCK0 started with pid=20, OS id=30069
Mon Feb 19 17:24:40 2007
ALTER DATABASE MOUNT
Mon Feb 19 17:24:41 2007
Starting background process ASMB
ASMB started with pid=22, OS id=30121
Starting background process RBAL
RBAL started with pid=23, OS id=30125
Loaded ASM Library - Generic Linux, version 2.0.2 (KABI_V2) library for asmlib interface
Mon Feb 19 17:24:45 2007
SUCCESS: diskgroup ORCL_DATA1 was mounted
Mon Feb 19 17:24:49 2007
Setting recovery target incarnation to 1
Mon Feb 19 17:24:49 2007
Successful mount of redo thread 1, with mount id 3309017062
Mon Feb 19 17:24:49 2007
Database mounted in Shared Mode (CLUSTER_DATABASE=TRUE)
Mon Feb 19 17:24:51 2007
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
SUCCESS: diskgroup BSA_DATA1 was mounted
SUCCESS: diskgroup BSA_DATA1 was dismounted
Mon Feb 19 17:24:52 2007
Completed: ALTER DATABASE MOUNT
Mon Feb 19 17:24:52 2007
ALTER DATABASE OPEN
Picked broadcast on commit scheme to generate SCNs
Mon Feb 19 17:24:52 2007
LGWR: STARTING ARCH PROCESSES
ARC0 started with pid=25, OS id=30406
Mon Feb 19 17:24:53 2007
ARC0: Archival started
ARC1: Archival started
LGWR: STARTING ARCH PROCESSES COMPLETE
ARC1 started with pid=26, OS id=30422
Mon Feb 19 17:24:53 2007
Thread 1 opened at log sequence 31
Current log# 1 seq# 31 mem# 0: +ORCL_DATA1/bsaprod/onlinelog/group_1.257.614969167
Successful open of redo thread 1
Mon Feb 19 17:24:53 2007
MTTR advisory is disabled because FAST_START_MTTR_TARGET is not set
Mon Feb 19 17:24:53 2007
ARC0: STARTING ARCH PROCESSES
Mon Feb 19 17:24:53 2007
ARC1: Becoming the 'no FAL' ARCH
ARC1: Becoming the 'no SRL' ARCH
Mon Feb 19 17:24:53 2007
SMON: enabling cache recovery
Mon Feb 19 17:24:53 2007
ARC2: Archival started
ARC0: STARTING ARCH PROCESSES COMPLETE
ARC0: Becoming the heartbeat ARCH
ARC2 started with pid=27, OS id=30436
Mon Feb 19 17:25:07 2007
Successfully onlined Undo Tablespace 1.
Mon Feb 19 17:25:07 2007
SMON: enabling tx recovery
Mon Feb 19 17:25:07 2007
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Starting background process QMNC
QMNC started with pid=29, OS id=30882
Mon Feb 19 17:26:31 2007
Completed: ALTER DATABASE OPEN
Mon Feb 19 17:26:38 2007
ALTER SYSTEM SET service_names='bsaprod','bsatest' SCOPE=MEMORY SID='bsaprod1';
Mon Feb 19 17:26:53 2007
Shutting down archive processes
Mon Feb 19 17:26:58 2007
ARCH shutting down
ARC2: Archival stopped
Mon Feb 19 17:32:16 2007
Error: KGXGN aborts the instance (6)
Mon Feb 19 17:32:16 2007
Errors in file /u01/app/oracle/oracle/admin/bsaprod/bdump/bsaprod1_lmon_29956.trc:
ORA-29702: error occurred in Cluster Group Service operation
LMON: terminating instance due to error 29702
Mon Feb 19 17:32:17 2007
System state dump is made for local instance
System State dumped to trace file /u01/app/oracle/oracle/admin/bsaprod/bdump/bsaprod1_diag_29952.trc
Mon Feb 19 17:32:18 2007
Trace dumping is performing id=[cdmp_20070219173217]
Mon Feb 19 17:32:21 2007
Instance terminated by LMON, pid = 29956
and also the output of crs_stat -t in first node is....
Name Type Target State Host
ora....d1.inst application ONLINE OFFLINE
ora....d2.inst application ONLINE OFFLINE
ora....od1.srv application ONLINE OFFLINE
ora....od2.srv application ONLINE OFFLINE
ora....test.cs application ONLINE OFFLINE
ora.bsaprod.db application ONLINE OFFLINE
ora....SM1.asm application ONLINE UNKNOWN dsrvbd003
ora....ER.lsnr application ONLINE UNKNOWN dsrvbd003
ora....03.lsnr application ONLINE UNKNOWN dsrvbd003
ora....003.gsd application ONLINE UNKNOWN dsrvbd003
ora....003.ons application ONLINE UNKNOWN dsrvbd003
ora....003.vip application ONLINE ONLINE dsrvbd003
ora....SM2.asm application ONLINE OFFLINE
ora....04.lsnr application ONLINE OFFLINE
ora....004.gsd application ONLINE OFFLINE
ora....004.ons application ONLINE OFFLINE
ora....004.vip application ONLINE OFFLINE -
after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
Hp officejet/deskjet 4625 fax function disabled after a factory reset.
Officejet/Deskjet 4625 Fax function disabled after a factory reset.
- HP 4625
- Fax function disabled after a factory reset, fax function disabled on fax machine.
Good day HP community! I have a problem on my Hp officejet/deskjet 4625 after i did a factory reset. Oh by the way my printer is on a wireless connection setup and its ip address kept on changing and became very annoying so i decided to do the factory reset. After the factory reset i visited a "teach me to how to re-setup the wireless connection for Hp officejet/deskjet 4625" i downloaded the file needed on the installation and followed the steps but I failed. Here is the LINK.
My installation failed during the "connect the usb cable from the printer to the computer" sequence. I plugged the usb cable waited patiently but after a long 30 minutes wait nothing happened. The full feature installer of the Hp officejet/deskjet 4625(OJ4620**) didnt work for me. Luckily i have a friend that had a basic installer of the Hp officejet/deskjet 4620(DJ4620**) sent me via e-mail. I wonder what is the difference between OJ4620 and DJ4620 installers were, but thanks to my friend the DJ4620 worked. I finished the installation and the wireless connection setup was successfull!
Now i can print via usb cable connection, network ssid connection & tru apple products. I just have one problem. My printer's fax function was disabled. I believe that the OJ4620 had an issue on win7 64bit OS, i also believe that the DJ4620 isnt capable on installing the fax function because it was only a basic installer.
I tried to search in the internet but to no avail, I cannot find a HP 4620 fax installer either an officejet installer nor a deskjet installer.
My machines:
Desktop - 64bit
Netbook - 64bit
Macbook Pro
Macbook Air
Hp officejet/deskjet 4625
I badly need help on the fax functions because my small office need it everyday. I hope someone can help me here. Thanks in advance!Hello theEGG.
Thank you for your detailed response. I understand after installing printer you are unable to use your Fax features. Any HP printer full feature software package already comes with the fax features.
Please uninstall your software. I am going to provide a HP document to help you: Uninstall The Software. After this progress is done please move onto the next step: (This is only for your Windows computers)
How to clean Temp Folder. In this document there is two ways to clean out the Temp folder. Please choose which option you are conformable with.
To install the software, please use the:Printer Install Wizard. Make sure you leave the USB cord out of the computer until it props you to insert the USB cord.
If you have any other questions please let me know.
Ashley
I worked on behalf of HP. -
My Ipad was disabled after I turned it off. I turned it back on 'ipad is disabled' connect to ITunes!
Why would it disable afer turning it off. I did not have a password issue. Not even once.
I have not synced on Itunes on my system sincen this Ipad was synced at the Apple Store.
Is there a way to connect on my pc to my Ipad from Icloud and restore my Ipad without loosing
everything? Or do I need to reset yet again. This would be the fourth time starting from scratch!
I had been Ipad replaced recently due to numerous problems with IOS7 including bluetooth problems
with my keyboard, freezing - crazy making issues and most importantly I lost all data on my pages
app and all contacts etc. and my ipad disabled itself after begin turned off!
Now with the new one, my same problem! What is going on? What am I not getting.
Prior to I0s& my Ipad performed beautifully. Now I do not feel I can trust this technology.
Any ideas?Read this Apple Discussion Thread and possible solutions. The audio jack has been the main culprit, also certain sync and automation settings including connected remotes.
-
Hi,
I am having trouble executing the Oracle silent installation instructions for this app.
http://download-uk.oracle.com/docs/cd/B25553_01/install.1012/b25463/clientinstallation.htm#CHDEJIIB
I am unable to extract the package contents using the setup.exe /a command as suggested. The /s /v"qn" switch will not install the package correctly.
I can grab the Oracle Calendar.msi file from the temp directory during an interactive install but cannot find the files that the instructions suggest most importantly the handy unison.ini configuration file is not there :-( .
Can someone help please.Dear all,
I've managed to work this one out for myself. Bit of a nightmare but here we go...
The nub of the problem is that a default value of the variable that sets the installation directory is not being declared in the msi.
As a result of this when you perform an installation without the GUI for some files only the installation path defaults to "" or the root directory of the PC.
Fortunately this path is covered by a Public parameter in the msi file :-) . You can pass public parameters into the msi when you install it. Like this:
msiexec.exe /i "mymsi.msi" MYPUBLICPARAMETER="myvalue"
I used the msitoxml application available on sourceforge to have a look at the parameters inside the msi which I grabbed from the temporary. The public parameters always have capital letters.
So for a silent install of the msi I ended up with this:
msiexec.exe /i "Oracle Calendar.msi" /qn INSTALLDIR="%programfiles%\Oracle\Calendar"
Having got the msi install working I thought I would try to find a way to pass the msi switches into the original installshield setup file so that it doesn't need extracting which Oracle might not want us to do.
We already know that the /v switch passes parameters to msiexec.exe when used on the setup exe. But what syntax do we need for this complex set of parameters? The Installshield setup executable expects any string containing spaces after the /v switch to wrapped in quotes. So we have the classic quotes within quotes problem.... After some experimentation it turns out that the \ character will escape quotes in this case.
So escaping the extra quotes we have:
OCal_win_10.1.2exe /s /v"/qn INSTALLDIR=\"%programfiles%\Oracle\Calendar\""
No idea whether this will help anyone else, but I had to write it up somewhere!
Chris -
Lenovo Enhanced USB Port Replicator SILENT INSTALLATION (distribution)
Hi!
I have problem with silent installation of the "USB Port Replicator".
I have an CD with autorun (usbportrep.exe starts), nd i need to install in silently on client computer.
usbportrep.exe hasn't any switches like \s or \hidden or \quiet.
I tried to made response file, but it doesn't helps.
Could you help me?
Thanks a lot!I have installed it.
During installation I copied sources from %temp% folder.
Package installs:
Lenovo USB Port Replicator (non msi)
Display Link Core Software (msi)
Lenovo Display Adapter (msi)
Then I captured first application. And compiled it ot msi.
I have made customization by two transform files for "Display Link Core Software" and "Lenovo Display Adapter"
After that I made batch file:
msiexec /i LenovoUSBPortReplicator-1.22.msi ALLUSERS=1 ARPNOMODIFY=1 ARPNOREMOVE=1 ADDLOCAL=All REBOOT="ReallySuppress" /qn
msiexec /i "DisplayLinkCoreSoftware.msi TRANSFORMS=DisplayLinkCoreSoftware.mst ALLOW64BIT=No WIN2KSP4=Yes WINXPSP0=No WINXPSP1=No WINXPSP2=Yes WINSERVER2003=No VISTA=Yes ALLUSERS=1 ARPNOMODIFY=1 ARPNOREMOVE=1 ADDLOCAL=All REBOOT="ReallySuppress" /qn
msiexec /i LenovoDisplayAdapter.msi TRANSFORMS=LenovoDisplayAdapter.mst ALLOW64BIT=No WIN2KSP4=Yes WINXPSP0=No WINXPSP1=No WINXPSP2=Yes WINSERVER2003=No VISTA=Yes ALLUSERS=1 ARPNOMODIFY=1 ARPNOREMOVE=1 ADDLOCAL=All REBOOT="ReallySuppress" /qn
Maybe you are looking for
-
HD Channels freeze after 5 minutes
Since the launch of BT sport my HD channels including new BT sport freeze after about 5 minutes. Help suggests I restart Home Hub and BT vision box. This gets the system going for the next 5 minutes. Note this is the behaviour whether accessing BT
-
Adobe Acrobat X Pro on Mac does not select duplex print by default
I have Adobe Acrobat X Pro 10.1.8 for Mac. When I print a document, Acrobat does not select duplex print (i.e. "Print on both sides") by default. While I can manually select duplex print, I don't understand why this isn't the default option here as i
-
Lilo does not install to the MBR....
Ok, I have been through the install 4 times and still no dice. I prefer lilo to grub so no posts convincing me to switch. Anyhow, what should the "boot = " entry be pointed at? Does that designate the install location? I am using my entire 40GB H
-
I installed J2EE on Windows NT. I am getting the following exceptions when I started J2EE Server.... 1. java.lang.NullPointerException at com.sun.enterprise.server.J2EEServer..... 2. RuntimeException: Unable to create ORB. Possible causes include TCP
-
How we can show authorization object at infoprovider level
hi all how we can show authorization object at infoprovider level.. shalini