Certificate Trust (pinning rules) not work.

Windows 7 SP1 x86, EMET 4.1 U1, IE 11
Stopped working function Certificate Trust (pinning rules).
There are no reports of EMET_Agent you visit the site
that has expired rules. There is only
the message to Event Viewer. How do I fix
this problem to EMET_Agent reported
expired rule at the entrance to the site?

Similar Messages

Certificate Trust (Pinning) disabled after silent installation

When we install EMET 4.1 (MSIEXEC.exe /qb!- /i "EMET Setup.msi" ALLUSERS=1 REBOOT=REALLYSUPPRESS) and import te Popular Software.xml and CertTrust.xml settings with EMET_Conf.exe the Quick Profile Name is set to custom Security setting and the
Certificate Trust (Pinning) option is disabled. The import of the CertTrust.xml worked because the pinning rules en protected websites are visible.
How can we use the Recommended Security Settings and enable the Certificate Trust (Pinning) option after installation? I tried to use a Group Policy but there are no group policy settings for the Certificate Trust (Pinning) option.
Has someone else experienced this and how cal we solve this?
Regards,
RK

The Group Policy settings for EMET 5.0 look the same as those for EMET 4.1. The 'problem' that is the system mitigation Certificate Trust (Pinning) is disabled after a silent installation is not (yet) fixed in EMET 5.0 technical preview. On the other hand
I found out that "EMET_CONF.exe --system Pinning=Enbled" enables the system mitigation Certificate Trust (Pinning). The Quick Profile Name remains set to custom Security setting but I guess that's the settings are te same as Recommended Security Settings.
Regards,
RK

Infopath form load rule not working in browser forms but works on Client

Hi
I am working on an Infopath form and there are rules on form load. The form load checks for a value in a list, if the username() matches the one in the list, then the form would change its view.
It works when I open it on client, but on the browser it fails.
Have anyone encountered such an issue.

Check below:
http://stackoverflow.com/questions/16222681/infopath-rule-is-not-running-when-checking-sharepoint-list-field-value
Ensure that "Include data for the active form only" was checked (I had to separate this field into another data connection because that box could not be checked for another field I was using), and
Ensure that in the rule I was selecting from the "dataFields" folder under the data connection instead of "queryFields"
http://sharepoint.stackexchange.com/questions/28554/infopath-form-load-rules-not-working
if I edit the Infopath form on Infopath 2007, it seems that the rules for the load form will be visible if created.
This look like a bug. Here are the steps below that will lead you to the bug:
Step 1: Open the infopath form in Infopath 2010 and create 6 rules for Form Load and Save it as a file.
Step 2: Open that infopath form that you created in Step 1 in InfoPath 2010 and go to the
Form Load section. You will only see the first 5 rules. The 6th rules that you created for Step 1 will just "vanish". Now, close that infopath form.
Step 3: Open that infopath form that you created in step 1 in InfoPath 2007 and select Tools > Form Option. In the
Open and Save category, click the Rules button and add a new rule in it and save it.
Step 4: Open that infopath form that you modify as describe in Step 3 in InfoPath 2010. That 6th rule will be visible.
Therefore, there might be a bug in InfoPath 2010 that restrict Rules to a max of 5 in Form Load and thus if anyone open that form in SharePoint, only the first 5 rules will be executed.
If this helped you resolve your issue, please mark it Answered

Defaulting Rules Not Working for Repair Orders in OM?

Hi,
Defaulting Rules have been setup for return line & standard line based on few conditions and it is working fine if we create a sales order directly from OM (Manual SO)?
But in our project we are using Depot Repair(Repair Orders), we tried to create a service request and then converted to a sales order here defaulting rules not working for repair orders?
Please help me to solve this issue ASAP.
Thanks,
Kishor

Hi,
You have like this:
1. Price list
2.OE_DEFAULT_PVT.Get_SOB_Currency_Code
You have to make
1. XXOE_DEFAULT_PVT.custom_code
2. Price list
3.OE_DEFAULT_PVT.Get_SOB_Currency_Code
Did you made own custom code to pick currency?
Regards,
Luko

Role membership rule not working

Hi guys,
When I create a role and assign 'membership rule' to it, the members are shown in preview screen.
But they are not show up in members screen of that role.
My environment is 11gR2 SP1.
It is working nicely in 11gR2 base. But from some bundle pack and after, it is not working.
1. is it right?
2. if then, why is it changed?
3. and how shoul I assign members to role?
(as a workaround I modified the memner arrtibute. => not working
and restart OIM, => still not working
and reboot the server.> still not working...)
can anyone help this?
regards,
dongsu

J,
It has been a critical issue in real customer project this year.
Certainly we informed it to local oracle team and they says it is intentional change and we have to accept it.
(means create role first and read in users by trusted recon from source again.. bra bra..)
But I do not get any documented information about it.
Actually in BP4 (may be..) if I change any attribute value of that user who supposed to belongs to that role, then it works.
But in BP7 and now in PS1, even that approach do not working.

Importing .p7b certificates using certutil does not work, but work with IE. I need to automatize certificate installation. Help!

Hello,
I have to add a trusted certificate authority to XP machines to allow use of mail via OWA.
There is a domain, but there are too remote machines which are not in the domain (and it's on them I'm experiencing the problem).
Domain sysdmin sent me the .P7B certificate, which I can load withour problem using import with IE. The certificate is stiored in the Trusted Root Certificate Authorities and it's all ok.
But I need to automatize the certificate import due to the hifg number of these clients as well as the linbe spped (very slow graphic), so I found the certutil utility.
I've tried with several commands (like "certutil -f -v -addstore root filename.p7b" or "certutil -enterprise -f -addstore NTAuth filename.p7b" and several variants), but the utility always said that the certificate is correctly imported, but when checking
with the MMC console I can't find it (and, by the way, trying to load again results in also being notified that the certificate is already loaded!), so all the stuf does not work.
What should I do to be able to import the .P7B in Trusted Root Certificate using command line (.bat file, of course)?
Many thanks in advance for any help!
Max

Hi,
As i can understand you want to import a .p7b file which is a chain of certificates. And certutil is not working.
I too had the same issue. After searching and thinking the alternatives for hours, got a solution which worked for me. Here is it.
Get certmgr.exe tool available with MS .net framework tools.
Try adding this to your batch file
certmgr -add -all -c "File.p7b" -s -r localMachine Root
where File.p7b is the file containing certificates. You can replace the name with your file name.
Check if its working.
Thanks,
Reyaz

HT4183 The "Trust" setting does not work with 10.8.2, even openssl s_client -connect ...:636 returned CONNECTED(00000003) verify return:1

even openssl s_client -connect ...:636 returned
CONNECTED(00000003)
verify return:1
No client certificate CA names sent
SSL handshake has read 1518 bytes and written 456 bytes
New, TLSv1/SSLv3, Cipher is AES256-SHA
Server public key is 2048 bit
Secure Renegotiation IS supported
Compression: NONE
Expansion: NONE
SSL-Session:
    Protocol : TLSv1
    Cipher    : AES256-SHA
Key-Arg   : None
    Start Time: 1363044139
    Timeout   : 300 (sec)
    Verify return code: 0 (ok)
Connect to OD without SSL works fine.
Anybody else?
Henri

Hi,
here are some more informations about the problem.
The root CA certificate is imported as trusted in the system keychain of the server and the client. A certificate evaluation returns "valid certificates, trusted ...".
The client bind fails with this messages, e.g. Kerio Control is able the use LDAPS, so it seams just the problem with the trustability of the certificates. Keychain trusts the certificates, OD client bind not, this is not so consistent.
Any idee?
Thanks
Henri
2013-03-14 19:39:02.776804 CET - Trigger - notified opendirectoryd:nodes;lastServerChanged;/LDAPv3/ldaps://macpro....:636
2013-03-14 19:39:02.793467 CET - 71825.330426.330427, Module: AppleODClientLDAP - unable to create connection to LDAP server - ldap_search_ext_s for the ro
otDSE failed with error 'server connection failed' (-1) error:14090086:SSL routines:SSL3_GET_SERVER_CERTIFICATE:certificate verify failed (self signed cert
ificate in certificate chain)
2013-03-14 19:39:02.793501 CE
CONNECTED(00000003)
depth=1 /C=DE/...
Certificate chain
0 s:/CN=macpro...
   i:/C=DE//OU=IT/CN=*.office.../emailAddress=admin@...
verify error:num=19:self signed certificate in certificate chain
verify return:0

Lightning to 30-pin adapter not working w/iHome/iPhone 6.

Lightning to 30-pin adapter is not working correctly with iHome/iPhone 6. When I plug phone in the music and time update will work but it won't charge the phone, unless I turn my phone around but then music won't work. I've only had my iHome for a year and used it with no problem with my 4S. Now that I have the iPhone 6 I decided to get the adapter so I wouldn't have to spend money on a new iHome. I thought I just had a bad adapter, at least that's what they told me in the Apple Store. So I exhanged it at Best Buy, where I bought it, and got another one. Very disappointed that I have the same problem. Anyone else have this problem? Did I just wain't $30.

No-one from Apple here
It is either a corrupt update to iOS
or something in Honda that no longer likes iOS 8.3
To eliminate an issue with iOS 8.3 basic troubleshooting
Restart
Reset
Restore ,as new ,check iPhone functions if working correctly then restore your back up to get back to normal
If still an issue you then need to eliminate the potential Honda side,2007 is very old technology compared to 8.3

Lightning to 30-pin Adapter not work properly with iPhone 5s

Lightning to 30-pin Adapter (0.2 m) with iPhone 5s working good with power adapter and 30-pin cable, but how iPhone at 100% power, I see message "This accessories is not working correctly".
But with iPad mini 1 everything is OK.

Bottom line, the iPhone case restricted insertion of the 8 pin adapter into the IPhone. Slide in cases with open bottoms have no problems but wrap around cases can restrict flush insertion due to insufficient access to the recepticle in the iPhone.

Alert Rule - not working. Wild Card character issue

Hi All,
I have a requirement where I need to trigger alerts for mapping failures
of all the interfaces whose namespace is urn:abc.com:odna* or urn:abc.com.odna*. (in the first instance, there is dot before odna and int he second instance, a colon before odna )
So to suit both the cases, I gave urn:abc.comodna in the Alert Rule.
It worked before. But now its not working.
Then when i changed it to urn:abc.com:odna* it works again. i really dont understand how it worked before and why it fails now.
What is the reason for the unpredicatable behaviour of WildCard Character based Alert Rules?
Should Wild Card Characters be avoided completely?

Hey
Just create two separate alert rules for the same alert category
one for urn:abc.com:odna* and another for urn:abc.com.odna*.
but before that please make sure that "Suppress multiple alerts of this rule" box is unchecked.
Also please check SAP Note 913858
Thanx
Aamir
Edited by: Aamir Suhail on May 20, 2009 9:16 AM

Rule not working in workflow but works in simulation mode

Hi guys
i have one more strange issue. I have a rule assigned to one of my task to dtermine the agnet based on a z table which is executed by a z function module in the rule. The rule works fine and gets the desired agent when run in the simulation mode. But when we test it from the workflow it dosent seems to be working. When i check the workflow log it says no agent for this task. any idea what am i missing?
thanks in advance.

Hi
yes both the workflow and the dialog step( in our case a decision step) is categorized as General task. I also have used the SWU_OBUF to refresh the buffer but still the same results. Rule works fine in simulation but when it is run in a workflow the workflow log says no agent found. any more suggestions? the workflow to rule binding is fine as well. The rule requires 3 parameters and in the binding i am pasing all the 3 elemts to the rule containers. so i am not sure why its not working?

Substitution rule not working

Hi
The substitution rule for getting the desired Business place and Section code is not working in Transaction code MRIS, whereas this substitution rule is working in all other Transaction codes.
Please suggest.
Regards
Prakash

Bhanu,
Subsitution rule works when you are posting in Financial Accounting tables: BSEG and BKPF. FB60 and MIRO do that.
The report doesn't make post in mentioned tables to get substitution done. Please make sure if there is a existing call transaction or only a planning are being assigned.
regards

Delete rule not working

I subscribe to a mailing list using a particular email address (not my primary account), all mail for which is redirected into a mailbox. I only want to keep messages from the last five days. I have a Rule which is set as follows:
If ALL of the following conditions are met:
Account = <the account>
Date Received is Greater Than 5 days old
Perform the following actions:
Delete Message
This rule does does not work. It is the first rule in my list of Rules. And it simply does nothing. Why?

Maxplanar,
Mail rules only run when the item is first processed. So you are in effect going to delete things only when they are received in an "old" state.
I would set up a smart mailbox or two. One to only show the 5 days of mail you want to pay attention to. Optionally make another smart mailbox to contain messages older than 5 days. You can just refer to the first mailbox and only see the messages you want. The other mailbox will be there for once a month when you select all the messages and delete them.
Most macs can handle 5 to 10 thousand messages without even starting to slow down. Perhaps once you have a managable folder that shows you the messages you care to see, you can live with manually cleaning up much less often?

Derivation Rules Not Working for other company codes

Hi,
I have 5 Company codes and only for one FM was activated. now i want to activate FM for all 5 company codes. for which i have assigned the FM area to all 5 company codes. I have also assigned the derivation strategy to all 5 company codes as well. now when i post a transaction for any other company code derivation rules is not being process hence no commitment item or fund center is derived. however for the original company code for which FM was activated in the first derivation rule are working fine means system is deriving commitment item and fund center. can any one tell me why derivation rules are not working for other company codes? do i have to add Company code in source field of derivation strategy? could this be the reason? because in beginning there was no other company code so we did not included any company code field in the first place.
Regards,

Faizan,
Go to Funds Management Government> Actual and Commitment Update/Integration> Activate/Deactivate Funds Management.
In the screen create an entry for each Company Code and Funds Management Area combination.
Activate the AA Derivtn flag if you want the derivation to be called and the Update flag if you want to update commitments and actuals in FM.
Thanks
Shyam

Copa derivation rule not working for Discount GL

Hi All,
Kindly note that I have a distribution rule where company & plant combination is used where condtion is that customer group 3 should be 018 and then replace distribution channel to 03.However the rule is not working for discount GL posted in the billing document.
I tried testing it in FB50 but then it does not allows me to enter plant and because of that derivation rule fails. However in my billing doc I do see a plant against discount GL and still the rule is not getting picked.
I had raised this issue earlier but the reply where not as expected and so I have rephraised my question.
Kindly help me on this.
Regards
Pranay

Hi Pranay
I could not understand your req to a great detail, following are my observations
1. There should be derivation rule in place 1st of all to derive customer group from billing doc...
Check if Cust Group is populated in your COPA doc or not.. For this cust group should be a segment level char in KEQ3
2. Create a derivation rule using method "Derivation".
Source fields would be Cust Group, Plant and Company code ( I guess you want to change dist channel with this combination)
Target field would be VTWEG (Dist Channel)....Click on the magnifying lens beside VTWEG and choose relevant radio button "Overwrite if ......."
CLick on RULE VALUES and maintain the required Values there
This should work...
Regards
Ajay M

Certificate Trust (pinning rules) not work.

Similar Messages

Maybe you are looking for