Certificate Validity Message

Hi,
I'm facing with an error while Anyconnect is trying to connect, showing a message about certificate validity (As is attached to this post), but it connects successfully.
I guess something is wrong with the cert I'm using (Its essential cert).
Cert Info :
Type : General
Usage : general purpose
Valid To: 30 Dec 2014
best Regards
Ali

Please review the following document:
AnyConnect Certificate Based Authentication
Your error is due to lack of proper USER certificate - not server (ASA) certificate. You need to either issue and install a proper user certificate on your client PC or setup the Connection Profile to not use certificate authentication (see step 6 in the linked document).

Similar Messages

A fix for the Mozilla Firefox SSL Certificate Validation Security Weakness vulnerability? This appears to be an issue with not revalidating certificates when loading HTTPS pages from cache.

We have to close vulnerabilities for PCI & Cybertrust certification. We have upgraded users running Firefox to version 7.0.1 but we are still receiving the message: Mozilla Firefox SSL Certificate Validation Security Weakness. Researching the issue, it appears to be related to certificates not being revalidated when loading HTTPS pages from cache. The bug report I found is:
Bug 660749 - Firefox doesn't (re)validate certificates when loading a HTTPS page from the cache

cookies.squite answer is Today at 5:15 PM .
New profile, same problem.
We've already established it is not a add-ons problem but obviously there will be less add-ons in this new profile to help exclude.
Since there is two PC profiles on the PC, I tried the second profile, same problem. Used the RESET FF function on the second PC profile...same thing...even followed the instruct for uninstall &re-install...same problem.
(3) different virus scanners, no hard core problems.
Suspect how I have something in Windows setup that no one else is using?

AnyConnect machine certificate validation error

Hi,
I'm trying to get certificate authentication to work for AnyConnect (3.1.02040) using already existing certificates in the machine store (Windows 7 clients).
I get the choose certificate prompt, but when I choose the correct certificate I just get a "Certificate validation failure" error.
So I tried and install a certificate from my lab CA - also in the machine store. And that worked as a charm.
When comparing the logs from DART - I see the following error message from the non-working certificate:
Date : 07/25/2014
Time : 11:39:02
Type : Error
Source : acvpnui
Description : Function: CTransportWinHttp::SendRequest
File: .\CTransportWinHttp.cpp
Line: 1146
Invoked Function: HttpSendRequest
Return Code: 12186 (0x00002F9A)
Description: WINDOWS_ERROR_CODE
After googling I found someon explaining the error code as:
"This is a WinInet/WinHttp error 12xxx will always be one of these.
what it means is you don't have the rights to access the private key for this Client certificate."
Is this correct, and in that case how do I fix the access rights for the certificate?
Thanks,
Charlie

I've started to look through the certificates again now and stumbled across the "Manage private keys.."-option.
The working certificate had a SID with read rights besides the system and administrator rights. So I tried just adding read rights for the domain users group to the old certificate, and it just started working!
Which is weird since it didn't work regardless of running AnyConnect as admin or not. Well well, at least it works. Thanks for taking the time Karthik!

Any way to bypass server certificate validation in AIR client?

Is there any way to bypass certificate validation and server identification for secure Channels or ChannelSets? I am aware of the existing workaround to import my own certificate into the user's CA chain, but I feel that having greater control on the client-side is preferred.
If there is not a way to bypass client-side certificate validation I will be filing this as a feature request at http://bugs.adobe.com
Thanks,
Karl
When producing a client-server solution it is occasionally useful to override the default behavior of HTTPS certificate validation and server identification. I would like to request the ability to override these systems in the AIR environment for applications installed with the "UNRESTRICTED" system access option.
Simply allowing the use of self-signed certificates without verification (perhaps signified by a secure protocol identifier other than "https") would provide adequate functionality, but some users may desire finer control.
This issue is partly addressed by bugs FP-711 and FP-214 but I feel it is important that any enhancement include the BlazeDS Channel in the case that the AIR application has unrestricted system access.
When deploying an AIR client application which is securely connected to a network appliance which is controlled by the same developer it is desirable to bypass the overhead of acquiring a PKI issued certificate for every customer. Independent, open-source, and not-for-profit developers could see increased ability to adopt the AIR platform with this improvement.
When deploying a network appliance to be used with an AIR application the requirement for a PKI issued certificate complicates the deployment of the network appliance by requiring DNS access, and thereby requiring Internet connectivity. Some customer sites require network isolation.
It is possible to generate a developer-specific certificate and import that certificate into the AIR client host's Trusted Root Certification Authorities list. This workaround deteriorates PKI best practices and complicates the installation of AIR software. It is not possible to depend solely on the ".air" packaging for installation with the added requirement to install a new CA on the user's host.
Java provides the requested functionality by allowing developers to provide their own implementations of javax.net.ssl.TrustManager for verification and javax.net.ssl.HostnameVerifier for identification. We have used this technique to communicate over the SDEE protocol with Cisco IDS devices which do not usually have PKI issued certificates.

Hi Robert,
No specific option to controle TOP/First features use.
However other options exist to control IQ resources.
Eg. Query_temp_sopace_limit, Query_Time, Max_IQ_Threads_Per_Connection, Max_Cartesian_Result.
Regards,
Tayeb.

Getting error while exporting certificate to OIF Certificate Validation

Hi All,
Currently I am working with Oracle identity federation 10.1.4.0.1. I am facing one problem while exporting certificate to Certificate Validation, the error I am getting after importing certificate at console is:
ERROR - oracle.security.crypto.asn1.ASN1FormatException: Got tag 0 instead of 16.
Write failed: Broken pipe
But It doesn't displaying any error in webapge after exporting certificate.
Any help in this regard really appreciated.
Thanks,
Iceman
Edited by:OIF version included

If the certificate is in text PEM format, please ensure that the actual certificate content is enclosed within:
-----BEGIN CERTIFICATE-----
MII................
-----END CERTIFICATE-----
Thats all. It should also not have the certificate in text. Just the content within those lines.
Hope this helps.

I am getting a certificate error message and there is no link on the page to add this site as an exception.

I am trying to open up the web page where we log into our employee email. Evidently the security certificate has been changed. I am getting a certificate error message, but I am not seeing a link provided where I can click to add this web site as an exception.

This is a user to user forum. You are defintely in wrong place.

How to get UI page validation messages?

Hi,
I have problem regarding Front End validation messages..how to get this
in my project i have a form with some fields
i need to generate small pop up message "already exist" for entering same values for perticular
columns (when click the tab for next column then i need message)
can any body help me..

Community Feedback and Suggestions (Do Not Post Product-Related Questions Here)
Mod: locking.

5800 XM "Expired Certificate" error message

For people who own a Nokia 5800 XM, the error message of "Expired Certificate" when downloading applications onto the device will be mean you cannot load on new apps, which can be frustrating.
Firstly you should try to update the firmware on your phone by 1 of 3 ways.
Using FOTA (Firmware Over The Air). Another thread of mine will explain this in detail. You can find it here.
Downloading Nokia Software Updater(NSU) and connecting your 5800 to the computer using a data cable.
Taking the handset to a Nokia Care point if you do not want to try the above 2 options.
**NOTE: Always be sure to make a back up of your personal details that are held on the phone as updating firmware will most likely delete any data left on the phone.
If you have used FOTA or NSU to update your firmware, or there is no new update available then doing the following will work and will allow you to install new applications without the expired certificate error message.
With the phone switched on, press the power button key once.
Scroll down to and select "Remove E: Memory Card".
Select Yes to remove the memory card.
Press OK and remove memory card from phone.
Press the Dialler on the main screen.
Type *#7370#
Enter security code. Default is 12345 unless it has been changed.
The phone will reset, wait for this to complete and power back on.
Select your country and type in the correct time and date.
Wait for the phone to complete its configurations, you may receive "My Nokia" or tutorial messages.
Power off phone.
Insert the memory card.
Power on the phone.
Wait for the phone to install any pre-loaded content from the memory card
Phone is ready to install applications, without "Expired Certificate" error message.
I have done the above myself and downloaded the PDF reader from the "Download" application from within the handset and it installed with no error after these steps.
I hope this helps.
My posts are my opinion and in no way the direct views of Nokia.
If my posts are helpful, please give me some KUDOS using the green star on the left.

try to sign your app(s) through Opda site.
If you want to thank someone, just click on the blue star at the bottom of their post

ADAPTER.JAVA_EXCEPTION - java.lang.Exception: no valid message format obje

Hi experts,
we have a problem when we call a web service PI (release 7.01 , SP 10), from legacy system : the PI system return this message : ADAPTER.JAVA_EXCEPTION ; - java.lang.Exception: no valid message format object found
For to test this scenario we use soapUI tool.
I tried the URL (... /XISOAPAdapter/HelperServlet?action=FindChannel ...) in IE and got the following response :
<?xml version="1.0"; ?>
- <s:ChannelInfo xmlns:s="http://sap.com/xi/WebService/xi30">
<channelID>11ccbb96a7f3349c895a005c9bc09cb7</channelID>
<name>CC_Soap_Sender_TestWS</name>
<type xmlns:st="http://sap.com/xi/XI/System">st:SOAP</type>
<direction>INBOUND</direction>
<party />
<service>BS_..........IDB_DEV</service>
</s:ChannelInfo>
so I think that this service is OK .
Thanks in advance for your help,
Alberto

Hi,
1) Check the URL once again- check for the extra spaces at the end of the link.
2) please refer below blog i hope it will help you
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40611dd6-e66e-2910-f383-e80fb44f9cd4?QuickLink=index&overridelayout=true
Did you check the page no 14 of the document which has the same problem - in problem analysis it has mentioned that check the URL as well as proxy setting of internet browser.
3) Try to create the ID objects manually (Sender Channel and Sender Agreement).....when we use the wizard a * gets introduced in the unfilled (unused) fields (party etc) ....however when manually created the unused fields are left blank.
4) Check if all the ID objects are available in SXI_CACHE.
regards,
ganesh.

How to set a dynamic validation message in javascript

Hi,
I am using the "validate" event on a field, along with the "script message" field, to make a validation and send a message to the user if the test fails.
- Is it possible to define parameters in this message, for example "field &1 is invalid" where we replace &1 by the name of a field?
- Is it possible to send 2 different messages (I guess it's like using a message &1)?
- What is the best practice according to your experience?
Notes:
- I am aware of the xfa.host.messageBox, but I'd like to keep Adobe logic for validations (am I wrong? why?)
- I also saw the possibility of binding a field from the context, to the message field, but I found that it was not very clean to do this way (if even possible)
Thx !

According to the tests I did since yesterday, it is very difficult to use the "validation script message" (in the "value" tab of a "text input" field, within a dynamic table), for sending a dynamic message.
I abandon, and prefer to use use
xfa.host.messageBox( "dynamic message text" )
For information, I could change the message during "validate" event, with a rather complex algorithm.
Unfortunately, when a table row is just added (dynamically, with a button), though the message has been changed, it displays the original value. When I change the field again, the changed validation message is taken into account. I don't know why.
Edited by: Sandra Rossi on Jul 24, 2009 9:01 AM : it's only to say that since then, this was the only solution! Question closed

Mail doesn't send certificate-signed message

Symptoms
When attempting to send a message in Mail that has been signed by a trusted certificate, a message appear that states:  "Unable to sign message You don’t have a trusted certificate in your keychain that matches the email address (sender’s email address). Without a certificate, you can’t sign messages sent from this address."
 The Compose window cannot be closed.
(same as describe for Lion in http://support.apple.com/kb/TS4222 )
Then, if you quit Mail and reopen it, the signed message reopen in its
compose window and can now be sent…

Symptoms
When attempting to send a message in Mail that has been signed by a trusted certificate, a message appear that states:  "Unable to sign message You don’t have a trusted certificate in your keychain that matches the email address (sender’s email address). Without a certificate, you can’t sign messages sent from this address."
 The Compose window cannot be closed.
(same as describe for Lion in http://support.apple.com/kb/TS4222 )
Then, if you quit Mail and reopen it, the signed message reopen in its
compose window and can now be sent…

Variable in the validation message

Dear all,
I have defined a new validation method with the following settings in the SEM-BCS:
Type of the data stream: totals records
Validation type: data rows and totaled
Then I have defined a new validation rule and a new message. For example:
Validation rule:
VAL_YTD u201E&1u201D ( u201CAu201D items ) = 0
Message:
u201CAu201D items (&1) donu2019t equal 0.
I use the group function with item.
My question:
How can I set up that in the message text that the system writes out the number of item in the message?
For example
u201C112u201D item (56 EURO) donu2019t equal 0.
Regards
Zsolt

Hi Zsolt,
I have struggled with this in the past and found the help document useful but I think it is not possible to list the incorrect Item (as suggested above by Collet).
NB If you have BCS 6.02 or greater, then you already have the new "jump to" functionality that can take users directly to the List of Totals records to display the incorrect data record - this provides some help for users and infact may be better because they would probably go to the Totals List after a validation message anyway.
NB It doesn't need any configuration, only installation of 6.02 (that is BCS 6, EHP2) or greater, plus (if you haven't already) activation of the EHP2 group close function in T-Code SFW5. Then the functionality will exist in your validation log screen after running the validation task.

Losing Data Validation Messages when writing back to context

( The base for this question is the ALV grid in section 2 of this [TimeSheetMockUp|http://www.duke.edu/~michaelm/TimeCard/AnnotatedTimeSheet.jpg] )
Users enter values in the white cells which represent the hours recorded on a given day for a certain type of time.
Lets say we have a z-object that supplies us with the overall grid structure, including the headers and (the shaded) summarization cells. The web dynpro ALV had been set to allow input only on the raw data cells. They are set to 4 places with one decimal.
As the app was being developed, when we entered invalid data in a cell, such as 123456, or 1.2345 or u2018qu2019, a nice message was displayed that told the us about the issue. This was free u2013 I guess the phase model does that for us, and we liked it.
Well, down the road a pieceu2026 we needed to add a method to recalc all the summary values from the raw inputs.
METHOD wddoafteraction .
* wizard: navigate to and get the rows data                         *
DATA lo_nd_nd_rows TYPE REF TO if_wd_context_node.
DATA lt_nd_rows TYPE wd_this->elements_nd_rows.
* navigate from <CONTEXT> to <ND_ROWS> via lead selection
lo_nd_nd_rows = wd_context->get_child_node( name = wd_this->wdctx_nd_rows ).
lo_nd_nd_rows->get_static_attributes_table( IMPORTING table = lt_nd_rows ).
* do the math                                                       *
DATA lt_updated_rows TYPE wd_this->elements_nd_rows.
CALL METHOD wd_assist->o_wc->recalc_update_and_return_wrows
    EXPORTING
      im_rows = lt_nd_rows
    IMPORTING
      ex_rows = lt_updated_rows.
* repopulate the rows                                      *
lo_nd_nd_rows->bind_table( new_items = lt_updated_rows set_initial_elements = abap_true ).
Now, weu2019re losing all the nice data validation messages u2013 they do not display (the offending entries are just cleared) !!!
After some investigation, it seems that the bind_table call is where they get lost (without that call, they appear) .
Iu2019ve tried placing this code in a number of hook methods, but the same thing occurs. It is currently in the viewu2019s afteraction hook.
So, u2026 I have two questions.
u2022     How do I get my nice messages back. ?
u2022      Where is the right place to update my context from
( Btw, downstream, our recalc outines will also want to throw messages that we will want processed after we get through the initial validation )
Thanksu2026
u2026Mike

Fixed with SAP Note 1410122 - WD ABAP ALV: Messages are not displayed

Validation messages in JSF (when not using ADF faces)

I've spent some time with JDeveloper 11 and would like to use it on an upcoming project. I have to target IE 6, so I won't be able to take advantage of ADF Faces. Instead I'd like to use the ADF Business Components with a standard JSF interface so it can be used by people still running IE 6.
I've created a Business Component from a database table and can bind a JSF HTML Creation Form by dragging the appropriate view from the AppModule in the Data Controls pane. However, when I attempt to submit the page without all the fields being valid I get the following validation error message:
j_id__ctru2:j_id__ctru6: Validation Error: Value is required. j_id__ctru2:j_id__ctru6: Validation Error: Value is required.
I've tried making this more descriptive, but editing the error message in the Validation Rules section of the Business Component has no effect. What's the best way to convey a meaningful validation message to the user when not using ADF Faces?
Also - I'm still very new to JDeveloper. Since I won't be able to rely on my users having Internet Explorer 7, would you recommend I stay with JDeveloper 10? The examples and documentation I've seen so far for JDeveloper 11 appear heavily biased towards using ADF Faces so I'm starting to wonder how much support is there for using plain old JSF.
Thanks for your time!

Hi,
if you are completely new to this then I suggest to use JDeveloper 10.1.3 and ADF Faces in there. Its good to use with IE6 as well. Currently we do have more tutorials available for this release than for 11, which for this reason is a better choice for someone new to this
Frank

ORA-29024: Certificate validation failure when trying to redirect to https

Hi, I was trying to redirect the page to another https website using utl_http.request,
I configured Oracle wallet and import the certificate, and successfully to get the webpage content in sqlplus by
select utl_http.request('https://<website>,null,<wallet>,<wallet password>) from dual,
but when I trying to use the same way in a button process of Apex, the error ORA-29024: Certificate validation failure prompt.
Anyone know what wrong with it?
Thanks
Vincent Pek

Hi, Sorry, I found that after i reboot my laptop , it's working now.

Certificate Validity Message

Similar Messages

Maybe you are looking for