Certificates delay
Hi,
I wrote my SAP HR Certification exam on 08 December 2006 in SA. Up to now SAPSA are saying they have not received the certificates. I have even left the country. How long does it take for SAP to print and send certificates after someone has passed an exam?
Who can i talk to in Germany to give them my new address so that they can send the certificate to the nearest SAP country office?
What can i do in the mean time while waiting for my certificate because i am losing a lot of GOOD opportunity when i can not prove that i am certified? even the card that some people talk about, i have not received.
Please help me,
Normally it takes 3-6 months to get the certification on hand depending upon the country etc. Normally your training institutes are the best guides. Alternatively you can talk to the SAP Education representative (part of SAP division in your country) in your country. Your training center should be able to give the contact details of SAP Education in your country. Or check SAP education website and get the contact details for your country in which you took the exam. Talk to them or email them directly giving your name and other details. Probably they would respond immediately.
Regards
Chandra
Similar Messages
-
The certificate does not want to come
Friends,
When in 2008 I passed 1z0-042 I've waited for the certificate for more than two months.
Well, after this period of time it did not want to come either until I put another email to the ocp team.
Now the same story with 1z0-043 which I passed this year on May 23.
Lets calculate how much time passed since that...I guess it will be something close to 40 days already which in a day or two will be 6 weeks. Am I right?
I have checked everything, absolutely everything. My address is the same as where the previous was one shipped and I myself did not move anywhere since. On certview oracle recognizes that I passed 1z0-043 and it also recognizes that I successfully submitted a form which are the only two requirements for success kit shipment. Also it shows that the certificate was shipped the next day after the exam date.
I really don't know what else there can be that might prevent the success kit from reaching me but I do know that something wrong went with it. It was either not sent at all or was sent and was lost somewhere.
Well, this topic is actually not to get replies like go to this or that link and read FAQs or sometimes you have wait for 3 and maybe 4 months because I have read all FAQs already.
Here
1z0-042 certificate delayed, hope 1z0-043 is not going to have same fate
you can also see that how people agree that I should not have any problems with the delivery.
By the way I put an email to ocp team also. To the first email I received a reply where they confirm that I passed 1z0-043 and submitted successfully a form. But to the second email I didnt get any replies yet.
I do really hope that somebody someday will give me some reply.
I don't really want to wait for another 40 days (and probably more) to get the success kit.
Certificate managers please do something.
Regards,
ora_fad.Possibly certificates are delayed by full email boxes.
IMHO Best understanding gained by reading: a slow train to Gwalior :as as my understanding fulfillment achieved through Dehli.
My understanding shipment date is when there is an authorization to send to the printing process ... not shipment of actual kit. ... kit producion os probably done by an external third party, possilby in batches. As the OCP (not OCA) kits have a credit card thing they may take a little longer.This kits often take nearer to the eight weeks to arrive. Emailing before that point probably doesnt help, at least certview now shows they are in process.
Edited by: bigdelboy on 04-Jul-2010 15:10 -
How can i delay the using period of certificate when i start ssl in ims
i enabled https and imaps in ims52,but i found the period of validity of the certificate is 1 year by default. how can i delay it to 5 years or more?
does it specify during generation of CERTIFICATE REQUEST ?
thx!
Message was edited by:
giant.salaThere is nothing you can do in Messaging Server for this. The expiration of a certificate is defined by the certificate itself.
-
Delay/hang on boot after upgrading to kernel 4.0.1
My laptop takes a very long time to boot and often does not even boot with kernel 4.0.1.
When the laptop does boot, my dmesg looks like this:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.0.1-1-ARCH (builduser@tobias) (gcc version 5.1.0 (GCC) ) #1 SMP PREEMPT Wed Apr 29 12:00:26 CEST 2015
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4ba3d184-2b03-4422-ac1a-2bd40dd37cb8 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008ccaffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008ccb0000-0x000000008e0affff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008e0b0000-0x00000000926befff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000926bf000-0x00000000928befff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000928bf000-0x0000000092ebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000092ebf000-0x0000000092fbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000092fbf000-0x0000000092ffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x0000000092fff000-0x0000000092ffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000093000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff980000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000025f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x92ffe000 ACPI 2.0=0x92ffe014 SMBIOS=0x92ebef98
[ 0.000000] efi: mem00: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000000000-0x0000000000001000) (0MB)
[ 0.000000] efi: mem01: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000001000-0x000000000006f000) (0MB)
[ 0.000000] efi: mem02: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000006f000-0x0000000000070000) (0MB)
[ 0.000000] efi: mem03: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000070000-0x0000000000080000) (0MB)
[ 0.000000] efi: mem04: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000000080000-0x0000000000082000) (0MB)
[ 0.000000] efi: mem05: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000082000-0x0000000000088000) (0MB)
[ 0.000000] efi: mem06: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x0000000000088000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem07: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem08: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000000100000-0x0000000000f28000) (14MB)
[ 0.000000] efi: mem09: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000000f28000-0x000000003795a000) (874MB)
[ 0.000000] efi: mem10: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000003795a000-0x0000000037ca5000) (3MB)
[ 0.000000] efi: mem11: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000037ca5000-0x0000000067cab000) (768MB)
[ 0.000000] efi: mem12: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x0000000067cab000-0x000000008b0c0000) (564MB)
[ 0.000000] efi: mem13: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008b0c0000-0x000000008b0e0000) (0MB)
[ 0.000000] efi: mem14: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008b0e0000-0x000000008bd39000) (12MB)
[ 0.000000] efi: mem15: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008bd39000-0x000000008ccb0000) (15MB)
[ 0.000000] efi: mem16: [Reserved | | | | | |WB|WT|WC|UC] range=[0x000000008ccb0000-0x000000008e0b0000) (20MB)
[ 0.000000] efi: mem17: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008e0b0000-0x000000008e2a2000) (1MB)
[ 0.000000] efi: mem18: [Loader Code | | | | | |WB|WT|WC|UC] range=[0x000000008e2a2000-0x000000008e2bf000) (0MB)
[ 0.000000] efi: mem19: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008e2bf000-0x000000008f4f2000) (18MB)
[ 0.000000] efi: mem20: [Loader Data | | | | | |WB|WT|WC|UC] range=[0x000000008f4f2000-0x000000008f4fe000) (0MB)
[ 0.000000] efi: mem21: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008f4fe000-0x000000008fe7f000) (9MB)
[ 0.000000] efi: mem22: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008fe7f000-0x000000008fe82000) (0MB)
[ 0.000000] efi: mem23: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008fe82000-0x000000008fe89000) (0MB)
[ 0.000000] efi: mem24: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008fe89000-0x000000008fe8a000) (0MB)
[ 0.000000] efi: mem25: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008fe8a000-0x000000008feb2000) (0MB)
[ 0.000000] efi: mem26: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000008feb2000-0x000000008feb3000) (0MB)
[ 0.000000] efi: mem27: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008feb3000-0x000000008fff1000) (1MB)
[ 0.000000] efi: mem28: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000008fff1000-0x000000008fff2000) (0MB)
[ 0.000000] efi: mem29: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000008fff2000-0x000000008fff3000) (0MB)
[ 0.000000] efi: mem30: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000008fff3000-0x0000000090000000) (0MB)
[ 0.000000] efi: mem31: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090000000-0x000000009000a000) (0MB)
[ 0.000000] efi: mem32: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009000a000-0x000000009000b000) (0MB)
[ 0.000000] efi: mem33: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009000b000-0x000000009000e000) (0MB)
[ 0.000000] efi: mem34: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009000e000-0x0000000090014000) (0MB)
[ 0.000000] efi: mem35: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090014000-0x000000009001c000) (0MB)
[ 0.000000] efi: mem36: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009001c000-0x000000009001d000) (0MB)
[ 0.000000] efi: mem37: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x000000009001d000-0x000000009001e000) (0MB)
[ 0.000000] efi: mem38: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009001e000-0x0000000090021000) (0MB)
[ 0.000000] efi: mem39: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000090021000-0x0000000090022000) (0MB)
[ 0.000000] efi: mem40: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090022000-0x0000000090024000) (0MB)
[ 0.000000] efi: mem41: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090024000-0x000000009002c000) (0MB)
[ 0.000000] efi: mem42: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009002c000-0x0000000090043000) (0MB)
[ 0.000000] efi: mem43: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090043000-0x0000000090044000) (0MB)
[ 0.000000] efi: mem44: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090044000-0x0000000090045000) (0MB)
[ 0.000000] efi: mem45: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090045000-0x0000000090046000) (0MB)
[ 0.000000] efi: mem46: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090046000-0x0000000090048000) (0MB)
[ 0.000000] efi: mem47: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090048000-0x000000009004d000) (0MB)
[ 0.000000] efi: mem48: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009004d000-0x0000000090057000) (0MB)
[ 0.000000] efi: mem49: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090057000-0x0000000090060000) (0MB)
[ 0.000000] efi: mem50: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090060000-0x0000000090066000) (0MB)
[ 0.000000] efi: mem51: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090066000-0x000000009006c000) (0MB)
[ 0.000000] efi: mem52: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009006c000-0x0000000090074000) (0MB)
[ 0.000000] efi: mem53: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090074000-0x0000000090090000) (0MB)
[ 0.000000] efi: mem54: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090090000-0x0000000090095000) (0MB)
[ 0.000000] efi: mem55: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090095000-0x0000000090096000) (0MB)
[ 0.000000] efi: mem56: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090096000-0x0000000090097000) (0MB)
[ 0.000000] efi: mem57: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090097000-0x00000000900b2000) (0MB)
[ 0.000000] efi: mem58: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900b2000-0x00000000900b4000) (0MB)
[ 0.000000] efi: mem59: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000900b4000-0x00000000900b6000) (0MB)
[ 0.000000] efi: mem60: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900b6000-0x00000000900b9000) (0MB)
[ 0.000000] efi: mem61: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900b9000-0x00000000900bc000) (0MB)
[ 0.000000] efi: mem62: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900bc000-0x00000000900bf000) (0MB)
[ 0.000000] efi: mem63: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900bf000-0x00000000900c1000) (0MB)
[ 0.000000] efi: mem64: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x00000000900c1000-0x00000000900c4000) (0MB)
[ 0.000000] efi: mem65: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900c4000-0x00000000900d5000) (0MB)
[ 0.000000] efi: mem66: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900d5000-0x00000000900d7000) (0MB)
[ 0.000000] efi: mem67: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900d7000-0x00000000900d8000) (0MB)
[ 0.000000] efi: mem68: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900d8000-0x00000000900de000) (0MB)
[ 0.000000] efi: mem69: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900de000-0x00000000900e1000) (0MB)
[ 0.000000] efi: mem70: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900e1000-0x00000000900e5000) (0MB)
[ 0.000000] efi: mem71: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900e5000-0x00000000900e7000) (0MB)
[ 0.000000] efi: mem72: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900e7000-0x00000000900e8000) (0MB)
[ 0.000000] efi: mem73: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900e8000-0x00000000900e9000) (0MB)
[ 0.000000] efi: mem74: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900e9000-0x00000000900ee000) (0MB)
[ 0.000000] efi: mem75: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900ee000-0x00000000900f0000) (0MB)
[ 0.000000] efi: mem76: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900f0000-0x00000000900f2000) (0MB)
[ 0.000000] efi: mem77: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900f2000-0x00000000900f6000) (0MB)
[ 0.000000] efi: mem78: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000900f6000-0x00000000900fd000) (0MB)
[ 0.000000] efi: mem79: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x00000000900fd000-0x000000009010b000) (0MB)
[ 0.000000] efi: mem80: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009010b000-0x000000009010d000) (0MB)
[ 0.000000] efi: mem81: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x000000009010d000-0x0000000090115000) (0MB)
[ 0.000000] efi: mem82: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090115000-0x0000000090129000) (0MB)
[ 0.000000] efi: mem83: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090129000-0x000000009027e000) (1MB)
[ 0.000000] efi: mem84: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x000000009027e000-0x0000000090281000) (0MB)
[ 0.000000] efi: mem85: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090281000-0x0000000090282000) (0MB)
[ 0.000000] efi: mem86: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x0000000090282000-0x0000000090283000) (0MB)
[ 0.000000] efi: mem87: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000090283000-0x00000000922bf000) (32MB)
[ 0.000000] efi: mem88: [Boot Code | | | | | |WB|WT|WC|UC] range=[0x00000000922bf000-0x00000000926bf000) (4MB)
[ 0.000000] efi: mem89: [Runtime Code |RUN| | | | |WB|WT|WC|UC] range=[0x00000000926bf000-0x00000000928bf000) (2MB)
[ 0.000000] efi: mem90: [Runtime Data |RUN| | | | |WB|WT|WC|UC] range=[0x00000000928bf000-0x0000000092abf000) (2MB)
[ 0.000000] efi: mem91: [Reserved | | | | | |WB|WT|WC|UC] range=[0x0000000092abf000-0x0000000092ebf000) (4MB)
[ 0.000000] efi: mem92: [ACPI Memory NVS | | | | | |WB|WT|WC|UC] range=[0x0000000092ebf000-0x0000000092fbf000) (1MB)
[ 0.000000] efi: mem93: [ACPI Reclaim Memory| | | | | |WB|WT|WC|UC] range=[0x0000000092fbf000-0x0000000092fff000) (0MB)
[ 0.000000] efi: mem94: [Boot Data | | | | | |WB|WT|WC|UC] range=[0x0000000092fff000-0x0000000093000000) (0MB)
[ 0.000000] efi: mem95: [Conventional Memory| | | | | |WB|WT|WC|UC] range=[0x0000000100000000-0x000000025f600000) (5622MB)
[ 0.000000] efi: mem96: [Reserved | | | | | | | | | ] range=[0x00000000000a0000-0x00000000000c0000) (0MB)
[ 0.000000] efi: mem97: [Reserved | | | | | | | | | ] range=[0x0000000093000000-0x000000009fa00000) (202MB)
[ 0.000000] efi: mem98: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000e0000000-0x00000000f0000000) (256MB)
[ 0.000000] efi: mem99: [Reserved | | | | | | | | | ] range=[0x00000000fe101000-0x00000000fe113000) (0MB)
[ 0.000000] efi: mem100: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000feb00000-0x00000000feb10000) (0MB)
[ 0.000000] efi: mem101: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem102: [Memory Mapped I/O |RUN| | | | | | | |UC] range=[0x00000000fed00000-0x00000000fee01000) (1MB)
[ 0.000000] efi: mem103: [Memory Mapped I/O |RUN| | | | | | | | ] range=[0x00000000ff980000-0x0000000100000000) (6MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: LENOVO 20267/Cherry 3A, BIOS 7CCN26WW 09/06/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x25f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FF0000000 write-back
[ 0.000000] 2 base 0090000000 mask 7FFE000000 write-back
[ 0.000000] 3 base 0092000000 mask 7FFF000000 write-back
[ 0.000000] 4 base 00FF980000 mask 7FFFF80000 write-protect
[ 0.000000] 5 base 00FFA00000 mask 7FFFE00000 write-protect
[ 0.000000] 6 base 00FFC00000 mask 7FFFC00000 write-protect
[ 0.000000] 7 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 8 base 0200000000 mask 7F80000000 write-back
[ 0.000000] 9 base 025F600000 mask 7FFFE00000 uncachable
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: last_pfn = 0x93000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b1b000, 0x01b1bfff] PGTABLE
[ 0.000000] BRK [0x01b1c000, 0x01b1cfff] PGTABLE
[ 0.000000] BRK [0x01b1d000, 0x01b1dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x25f400000-0x25f5fffff]
[ 0.000000] [mem 0x25f400000-0x25f5fffff] page 2M
[ 0.000000] BRK [0x01b1e000, 0x01b1efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x240000000-0x25f3fffff]
[ 0.000000] [mem 0x240000000-0x25f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x220000000-0x23fffffff]
[ 0.000000] [mem 0x220000000-0x23fffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x8ccaffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0x8cbfffff] page 2M
[ 0.000000] [mem 0x8cc00000-0x8ccaffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x8e0b0000-0x926befff]
[ 0.000000] [mem 0x8e0b0000-0x8e1fffff] page 4k
[ 0.000000] [mem 0x8e200000-0x925fffff] page 2M
[ 0.000000] [mem 0x92600000-0x926befff] page 4k
[ 0.000000] BRK [0x01b1f000, 0x01b1ffff] PGTABLE
[ 0.000000] BRK [0x01b20000, 0x01b20fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x92fff000-0x92ffffff]
[ 0.000000] [mem 0x92fff000-0x92ffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x21fffffff]
[ 0.000000] [mem 0x100000000-0x21fffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x3795a000-0x37ca4fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x0000000092FFE014 000024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 0x0000000092FFE210 0000C4 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 0x0000000092FF7000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 0x0000000092FE7000 00C0C5 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 0x0000000092FBB000 000040
[ 0.000000] ACPI: SLIC 0x0000000092FFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: UEFI 0x0000000092FFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 0x0000000092FFA000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MSDM 0x0000000092FF9000 000055 (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 0x0000000092FF8000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 0x0000000092FF6000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 0x0000000092FF5000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 0x0000000092FF4000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FE6000 0007F9 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BOOT 0x0000000092FE4000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 0x0000000092FE2000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DBGP 0x0000000092FE1000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FD8000 000539 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FD7000 000AD8 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FD3000 0032C5 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FD2000 000068 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 0x0000000092FD1000 00088F (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DMAR 0x0000000092FCF000 000088 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: BGRT 0x0000000092FD0000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000025f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x25f5f9000-0x25f5fcfff]
[ 0.000000] [ffffea0000000000-ffffea00097fffff] PMD -> [ffff880256e00000-ffff88025ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000025f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000006efff]
[ 0.000000] node 0: [mem 0x0000000000070000-0x0000000000087fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000008ccaffff]
[ 0.000000] node 0: [mem 0x000000008e0b0000-0x00000000926befff]
[ 0.000000] node 0: [mem 0x0000000092fff000-0x0000000092ffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000025f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000025f5fffff]
[ 0.000000] On node 0 totalpages: 2033734
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 25 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9227 pages used for memmap
[ 0.000000] DMA32 zone: 590528 pages, LIFO batch:31
[ 0.000000] Normal zone: 22488 pages used for memmap
[ 0.000000] Normal zone: 1439232 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9da00000-0x9f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8ccb0000-0x8e0affff]
[ 0.000000] PM: Registered nosave memory: [mem 0x926bf000-0x928befff]
[ 0.000000] PM: Registered nosave memory: [mem 0x928bf000-0x92ebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x92ebf000-0x92fbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x92fbf000-0x92ffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x93000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xff97ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff980000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 31 pages/cpu @ffff88025f200000 s86168 r8192 d32616 u262144
[ 0.000000] pcpu-alloc: s86168 r8192 d32616 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2001930
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=4ba3d184-2b03-4422-ac1a-2bd40dd37cb8 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at drivers/iommu/dmar.c:829 warn_invalid_dmar+0x7c/0x90()
[ 0.000000] Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: LENOVO; Ver: 7CCN26WW; Product Version: IdeaPad U330p
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.0.1-1-ARCH #1
[ 0.000000] Hardware name: LENOVO 20267/Cherry 3A, BIOS 7CCN26WW 09/06/2013
[ 0.000000] 0000000000000000 f4e3b87505eb06f4 ffffffff81803cf8 ffffffff8156de97
[ 0.000000] 0000000000000000 ffffffff81803d50 ffffffff81803d38 ffffffff81074d7a
[ 0.000000] ffffffff81803d68 0000000000000000 ffffffff8172bf46 ffffffff81b1a008
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff8156de97>] dump_stack+0x4c/0x6e
[ 0.000000] [<ffffffff81074d7a>] warn_slowpath_common+0x8a/0xc0
[ 0.000000] [<ffffffff81074e6e>] warn_slowpath_fmt_taint+0x4e/0x70
[ 0.000000] [<ffffffff818fac9d>] ? __acpi_map_table+0x13/0x18
[ 0.000000] [<ffffffff81567d07>] ? acpi_os_map_iomem+0x27/0x14e
[ 0.000000] [<ffffffff813ce0cc>] warn_invalid_dmar+0x7c/0x90
[ 0.000000] [<ffffffff81567e3c>] ? acpi_os_map_memory+0xe/0x10
[ 0.000000] [<ffffffff8156873c>] dmar_validate_one_drhd+0xcc/0xf0
[ 0.000000] [<ffffffff813ce27a>] dmar_walk_remapping_entries+0x8a/0x1b0
[ 0.000000] [<ffffffff8192e7f9>] detect_intel_iommu+0x61/0xf2
[ 0.000000] [<ffffffff81568670>] ? xen_swiotlb_init+0x4d0/0x4d0
[ 0.000000] [<ffffffff818f3c74>] pci_iommu_alloc+0x51/0x6e
[ 0.000000] [<ffffffff81904aff>] mem_init+0x17/0x9d
[ 0.000000] [<ffffffff818e8dff>] start_kernel+0x255/0x4ac
[ 0.000000] [<ffffffff818e8120>] ? early_idt_handlers+0x120/0x120
[ 0.000000] [<ffffffff818e8339>] x86_64_start_reservations+0x2a/0x2c
[ 0.000000] [<ffffffff818e849c>] x86_64_start_kernel+0x161/0x184
[ 0.000000] ---[ end trace 02d721d3c6215a91 ]---
[ 0.000000] Memory: 7856876K/8134936K available (5601K kernel code, 835K rwdata, 1776K rodata, 1160K init, 1152K bss, 278060K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:760 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 2294.175 MHz processor
[ 0.000044] Calibrating delay loop (skipped), value calculated using timer frequency.. 4590.53 BogoMIPS (lpj=7647250)
[ 0.000048] pid_max: default: 32768 minimum: 301
[ 0.000054] ACPI: Core revision 20150204
[ 0.021259] ACPI: All ACPI Tables successfully acquired
[ 0.047478] Security Framework initialized
[ 0.047487] Yama: becoming mindful.
[ 0.048209] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.050517] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.051505] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.051519] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.051795] Initializing cgroup subsys blkio
[ 0.051800] Initializing cgroup subsys memory
[ 0.051807] Initializing cgroup subsys devices
[ 0.051810] Initializing cgroup subsys freezer
[ 0.051813] Initializing cgroup subsys net_cls
[ 0.051843] CPU: Physical Processor ID: 0
[ 0.051844] CPU: Processor Core ID: 0
[ 0.051850] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.051851] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.053148] mce: CPU supports 7 MCE banks
[ 0.053168] CPU0: Thermal monitoring enabled (TM1)
[ 0.053181] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.053183] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.053321] Freeing SMP alternatives memory: 20K (ffffffff819f4000 - ffffffff819f9000)
[ 0.054410] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.057040] ftrace: allocating 21221 entries in 83 pages
[ 0.069600] dmar: Host address width 39
[ 0.069603] dmar: DRHD base: 0x00000000000000 flags: 0x1
[ 0.069605] dmar: parse DMAR table failure.
[ 0.070689] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.103674] TSC deadline timer enabled
[ 0.103679] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (fam: 06, model: 45, stepping: 01)
[ 0.103715] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.103744] ... version: 3
[ 0.103745] ... bit width: 48
[ 0.103747] ... generic registers: 4
[ 0.103748] ... value mask: 0000ffffffffffff
[ 0.103749] ... max period: 0000ffffffffffff
[ 0.103751] ... fixed-purpose events: 3
[ 0.103752] ... event mask: 000000070000000f
[ 0.123794] x86: Booting SMP configuration:
[ 0.123796] .... node #0, CPUs: #1
[ 0.138543] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.145191] #2 #3
[ 0.180995] x86: Booted up 1 node, 4 CPUs
[ 0.181000] smpboot: Total of 4 processors activated (18360.12 BogoMIPS)
[ 0.186435] devtmpfs: initialized
[ 0.189804] PM: Registering ACPI NVS region [mem 0x92ebf000-0x92fbefff] (1048576 bytes)
[ 0.190050] pinctrl core: initialized pinctrl subsystem
[ 0.190124] RTC time: 9:29:51, date: 05/10/15
[ 0.190281] NET: Registered protocol family 16
[ 0.202884] cpuidle: using governor ladder
[ 0.216212] cpuidle: using governor menu
[ 0.216250] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.216253] ACPI: bus type PCI registered
[ 0.216255] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.216361] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.216364] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.216813] PCI: Using configuration type 1 for base access
[ 0.229973] ACPI: Added _OSI(Module Device)
[ 0.229976] ACPI: Added _OSI(Processor Device)
[ 0.229978] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.229980] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.236152] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.240737] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.241979] ACPI: Dynamic OEM Table Load:
[ 0.241994] ACPI: SSDT 0xFFFF8802554FF800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120816)
[ 0.243091] ACPI: Dynamic OEM Table Load:
[ 0.243104] ACPI: SSDT 0xFFFF880255502000 0005AA (v01 PmRef ApIst 00003000 INTL 20120816)
[ 0.244255] ACPI: Dynamic OEM Table Load:
[ 0.244265] ACPI: SSDT 0xFFFF880255512E00 000119 (v01 PmRef ApCst 00003000 INTL 20120816)
[ 0.250458] ACPI: Interpreter enabled
[ 0.250470] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.250480] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.250508] ACPI: (supports S0 S3 S4 S5)
[ 0.250510] ACPI: Using IOAPIC for interrupt routing
[ 0.250551] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.270829] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.270837] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.271662] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.272256] PCI host bridge to bus 0000:00
[ 0.272260] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.272263] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.272266] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.272269] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.272271] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.272273] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.272275] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.272277] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.272279] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.272281] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.272283] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.272285] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.272287] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.272289] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.272291] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.272293] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.272296] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.272306] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.272513] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.272529] pci 0000:00:02.0: reg 0x10: [mem 0xb2000000-0xb23fffff 64bit]
[ 0.272539] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.272545] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.272742] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.272755] pci 0000:00:03.0: reg 0x10: [mem 0xb2510000-0xb2513fff 64bit]
[ 0.273026] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.273075] pci 0000:00:14.0: reg 0x10: [mem 0xb2500000-0xb250ffff 64bit]
[ 0.273242] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.273385] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.273451] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.273502] pci 0000:00:16.0: reg 0x10: [mem 0xb2518000-0xb251801f 64bit]
[ 0.273679] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.273911] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.273952] pci 0000:00:1b.0: reg 0x10: [mem 0xb2514000-0xb2517fff 64bit]
[ 0.274147] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.274296] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.274360] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.274568] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.274723] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.274789] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
[ 0.274995] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.275151] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.275214] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.275420] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.275577] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.275654] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.275702] pci 0000:00:1d.0: reg 0x10: [mem 0xb251c000-0xb251c3ff]
[ 0.275922] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.276091] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.276153] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.276586] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.276629] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.276648] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.276667] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.276685] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.276703] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.276722] pci 0000:00:1f.2: reg 0x24: [mem 0xb251b000-0xb251b7ff]
[ 0.276832] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.277021] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.277058] pci 0000:00:1f.3: reg 0x10: [mem 0xb2519000-0xb25190ff 64bit]
[ 0.277111] pci 0000:00:1f.3: reg 0x20: [io 0x4040-0x405f]
[ 0.277465] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.277656] pci 0000:02:00.0: [8086:08b2] type 00 class 0x028000
[ 0.277706] pci 0000:02:00.0: reg 0x10: [mem 0xb2400000-0xb2401fff 64bit]
[ 0.277924] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.277976] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.286250] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.286261] pci 0000:00:1c.2: bridge window [mem 0xb2400000-0xb24fffff]
[ 0.286408] pci 0000:00:1c.3: PCI bridge to [bus 03-08]
[ 0.286415] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.286423] pci 0000:00:1c.3: bridge window [mem 0xb1000000-0xb1ffffff]
[ 0.286435] pci 0000:00:1c.3: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 0.286492] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.287362] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287422] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287478] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287534] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287589] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287644] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287698] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287753] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.288526] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 0.288577] ACPI : EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62
[ 0.288706] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.288709] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.288712] vgaarb: loaded
[ 0.288714] vgaarb: bridge control possible 0000:00:02.0
[ 0.288854] PCI: Using ACPI for IRQ routing
[ 0.295044] PCI: pci_cache_line_size set to 64 bytes
[ 0.295089] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 0.295091] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 0.295093] e820: reserve RAM buffer [mem 0x8ccb0000-0x8fffffff]
[ 0.295095] e820: reserve RAM buffer [mem 0x926bf000-0x93ffffff]
[ 0.295097] e820: reserve RAM buffer [mem 0x93000000-0x93ffffff]
[ 0.295099] e820: reserve RAM buffer [mem 0x25f600000-0x25fffffff]
[ 0.295243] NetLabel: Initializing
[ 0.295245] NetLabel: domain hash size = 128
[ 0.295246] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.295262] NetLabel: unlabeled traffic allowed by default
[ 0.295291] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.295298] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.297333] Switched to clocksource hpet
[ 0.303552] pnp: PnP ACPI init
[ 0.303701] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.303705] system 00:00: [io 0xffff] has been reserved
[ 0.303707] system 00:00: [io 0xffff] has been reserved
[ 0.303710] system 00:00: [io 0xffff] has been reserved
[ 0.303712] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.303715] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.303719] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.303782] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.303842] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.303846] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.303883] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.303986] pnp 00:04: Plug and Play ACPI device, IDs ETD060f PNP0f0b PNP0f12 PNP0f03 PNP0f0e PNP0f13 (active)
[ 0.304212] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.304215] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.304218] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.304220] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.304223] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.304225] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.304228] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.304230] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.304233] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.304235] system 00:05: [mem 0x9fa10000-0x9fa10fff] has been reserved
[ 0.304238] system 00:05: [mem 0xffffffff-0x100000ffe] could not be reserved
[ 0.304241] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.305220] pnp: PnP ACPI: found 6 devices
[ 0.312019] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.312024] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.312029] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.312047] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.312050] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.312052] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.312063] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fcfffff]
[ 0.312077] pci 0000:00:1c.0: BAR 15: assigned [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.312081] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.312084] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.312088] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.312093] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fcfffff]
[ 0.312098] pci 0000:00:1c.0: bridge window [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.312104] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.312109] pci 0000:00:1c.2: bridge window [mem 0xb2400000-0xb24fffff]
[ 0.312118] pci 0000:00:1c.3: PCI bridge to [bus 03-08]
[ 0.312121] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.312126] pci 0000:00:1c.3: bridge window [mem 0xb1000000-0xb1ffffff]
[ 0.312130] pci 0000:00:1c.3: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 0.312137] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.312140] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.312142] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.312144] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 0.312146] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 0.312148] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 0.312151] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 0.312153] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 0.312155] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 0.312157] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 0.312159] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 0.312161] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 0.312163] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 0.312165] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 0.312167] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 0.312170] pci_bus 0000:00: resource 19 [mem 0x9fa00000-0xfeafffff window]
[ 0.312172] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.312174] pci_bus 0000:01: resource 1 [mem 0x9fb00000-0x9fcfffff]
[ 0.312176] pci_bus 0000:01: resource 2 [mem 0x9fd00000-0x9fefffff 64bit pref]
[ 0.312179] pci_bus 0000:02: resource 1 [mem 0xb2400000-0xb24fffff]
[ 0.312181] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
[ 0.312183] pci_bus 0000:03: resource 1 [mem 0xb1000000-0xb1ffffff]
[ 0.312185] pci_bus 0000:03: resource 2 [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 0.312228] NET: Registered protocol family 2
[ 0.312465] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.312657] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.312836] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.312860] TCP: reno registered
[ 0.312875] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.312912] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.312988] NET: Registered protocol family 1
[ 0.313005] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.327448] PCI: CLS 64 bytes, default 64
[ 0.327501] Unpacking initramfs...
[ 0.412467] Freeing initrd memory: 3372K (ffff88003795a000 - ffff880037ca5000)
[ 0.412479] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.412483] software IO TLB [mem 0x870c0000-0x8b0c0000] (64MB) mapped at [ffff8800870c0000-ffff88008b0bffff]
[ 0.412512] Simple Boot Flag at 0x44 set to 0x1
[ 0.412725] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.412789] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x10
[ 0.412797] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x10
[ 0.412805] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x10
[ 0.412814] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x10
[ 0.412870] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.412907] Scanning for low memory corruption every 60 seconds
[ 0.413286] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.413308] Initialise system trusted keyring
[ 0.413707] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.415458] zpool: loaded
[ 0.415461] zbud: loaded
[ 0.415678] VFS: Disk quotas dquot_6.5.2
[ 0.415726] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.415943] Key type big_key registered
[ 0.416171] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.416228] io scheduler noop registered
[ 0.416233] io scheduler deadline registered
[ 0.416273] io scheduler cfq registered (default)
[ 0.416963] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.416969] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.416986] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.416989] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.416993] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.417011] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.417015] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.417023] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.417065] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 0.417099] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.417108] pciehp 0000:00:1c.3:pcie04: Slot #3 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 0.417134] pciehp 0000:00:1c.3:pcie04: service driver pciehp loaded
[ 0.417140] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.417160] efifb: probing for efifb
[ 0.417181] efifb: framebuffer at 0xa0000000, mapped to 0xffffc90010f00000, using 4160k, total 4160k
[ 0.417183] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 0.417184] efifb: scrolling: redraw
[ 0.417187] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.420754] Console: switching to colour frame buffer device 170x48
[ 0.424164] fb0: EFI VGA frame buffer device
[ 0.424176] intel_idle: MWAIT substates: 0x11142120
[ 0.424178] intel_idle: v0.4 model 0x45
[ 0.424179] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.424505] GHES: HEST is not enabled!
[ 0.424588] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.425067] Linux agpgart interface v0.103
[ 0.425130] rtc_cmos 00:01: RTC can wake from S4
[ 0.425268] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.425299] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.425313] Intel P-state driver initializing.
[ 0.425465] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.413465] tsc: Refined TSC clocksource calibration: 2294.688 MHz
[ 2.413125] Switched to clocksource tsc
[ 82.866587] TCP: cubic registered
[ 82.866714] NET: Registered protocol family 10
[ 82.866954] NET: Registered protocol family 17
[ 82.867726] Loading compiled-in X.509 certificates
[ 82.867744] registered taskstats version 1
[ 82.868391] Magic number: 15:622:474
[ 82.868494] rtc_cmos 00:01: setting system clock to 2015-05-10 09:31:14 UTC (1431250274)
[ 82.868595] PM: Hibernation image not present or could not be loaded.
[ 82.868875] Freeing unused kernel memory: 1160K (ffffffff818d2000 - ffffffff819f4000)
[ 82.868876] Write protecting the kernel read-only data: 8192k
[ 82.869179] Freeing unused kernel memory: 532K (ffff88000157b000 - ffff880001600000)
[ 82.869263] Freeing unused kernel memory: 272K (ffff8800017bc000 - ffff880001800000)
[ 82.875762] random: systemd-tmpfile urandom read with 78 bits of entropy available
[ 82.888461] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2D] at 0x60,0x64 irq 1,12
[ 82.911618] ACPI: bus type USB registered
[ 82.911655] usbcore: registered new interface driver usbfs
[ 82.911670] usbcore: registered new interface driver hub
[ 82.911702] usbcore: registered new device driver usb
[ 82.911794] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 82.911850] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 82.912630] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 82.912881] ehci-pci: EHCI PCI platform driver
[ 82.913059] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 82.913066] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 82.913080] ehci-pci 0000:00:1d.0: debug port 2
[ 82.913560] SCSI subsystem initialized
[ 82.914756] libata version 3.00 loaded.
[ 82.916990] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 82.917012] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb251c000
[ 82.924735] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 82.924981] hub 1-0:1.0: USB hub found
[ 82.924988] hub 1-0:1.0: 2 ports detected
[ 82.925365] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 82.925376] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 82.925452] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000b810
[ 82.925458] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 82.925751] hub 2-0:1.0: USB hub found
[ 82.925768] hub 2-0:1.0: 9 ports detected
[ 82.927202] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 82.927206] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 82.927353] hub 3-0:1.0: USB hub found
[ 82.927363] hub 3-0:1.0: 4 ports detected
[ 82.927907] ahci 0000:00:1f.2: version 3.0
[ 82.932069] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 82.944698] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x2 impl SATA mode
[ 82.944704] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 82.945139] scsi host0: ahci
[ 82.945274] scsi host1: ahci
[ 82.945379] scsi host2: ahci
[ 82.945443] ata1: DUMMY
[ 82.945446] ata2: SATA max UDMA/133 abar m2048@0xb251b000 port 0xb251b180 irq 44
[ 82.945448] ata3: DUMMY
[ 83.231283] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 83.264603] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 83.266700] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 83.266704] ata2.00: ATA-9: Samsung SSD 840 EVO 250GB, EXT0BB0Q, max UDMA/133
[ 83.266707] ata2.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 83.267065] ata2.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 83.267071] ata2.00: configured for UDMA/133
[ 83.267254] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 840 BB0Q PQ: 0 ANSI: 5
[ 83.269231] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 83.269334] sd 1:0:0:0: [sda] Write Protect is off
[ 83.269339] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 83.269359] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 83.270978] sda: sda1 sda2
[ 83.271791] sd 1:0:0:0: [sda] Attached SCSI disk
[ 83.284573] usb 2-4: new full-speed USB device number 2 using xhci_hcd
[ 83.355258] hub 1-1:1.0: USB hub found
[ 83.355311] hub 1-1:1.0: 8 ports detected
[ 83.462067] hidraw: raw HID events driver (C) Jiri Kosina
[ 83.465833] usbcore: registered new interface driver usbhid
[ 83.465836] usbhid: USB HID core driver
[ 83.467369] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-4/input2
[ 83.584939] input: Logitech M315/M235 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.2/0003:046D:C52B.0003/0003:046D:4009.0004/input/input2
[ 83.585021] logitech-hidpp-device 0003:046D:4009.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M315/M235] on usb-0000:00:14.0-4:1
[ 83.586903] input: Logitech M185 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.2/0003:046D:C52B.0003/0003:046D:4008.0005/input/input3
[ 83.586954] logitech-hidpp-device 0003:046D:4008.0005: input,hidraw2: USB HID v1.11 Mouse [Logitech M185] on usb-0000:00:14.0-4:2
[ 83.591105] input: Logitech K270 as /devices/pci0000:00/0000:00:14.0/usb2/2-4/2-4:1.2/0003:046D:C52B.0003/0003:046D:4003.0006/input/input4
[ 83.591222] logitech-hidpp-device 0003:046D:4003.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech K270] on usb-0000:00:14.0-4:3
[ 83.621088] usb 2-5: new high-speed USB device number 3 using xhci_hcd
[ 83.678182] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 83.906684] systemd[1]: systemd 219 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD +IDN)
[ 83.906861] systemd[1]: Detected architecture 'x86-64'.
[ 83.909200] systemd[1]: Set hostname to <lenovo>.
[ 83.969066] systemd[1]: Unit type .busname is not supported on this system.
[ 83.980863] usb 2-6: new full-speed USB device number 4 using xhci_hcd
[ 84.037186] systemd[1]: Reached target Login Prompts.
[ 84.037200] systemd[1]: Starting Login Prompts.
[ 84.037213] systemd[1]: Reached target Remote File Systems.
[ 84.037221] systemd[1]: Starting Remote File Systems.
[ 84.037427] systemd[1]: Created slice Root Slice.
[ 84.037440] systemd[1]: Starting Root Slice.
[ 84.037476] systemd[1]: Listening on Journal Socket (/dev/log).
[ 84.037484] systemd[1]: Starting Journal Socket (/dev/log).
[ 84.037591] systemd[1]: Created slice System Slice.
[ 84.037604] systemd[1]: Starting System Slice.
[ 84.037630] systemd[1]: Listening on udev Control Socket.
[ 84.037637] systemd[1]: Starting udev Control Socket.
[ 84.037662] systemd[1]: Listening on Journal Socket.
[ 84.037672] systemd[1]: Starting Journal Socket.
[ 84.037683] systemd[1]: Started File System Check on Root Device.
[ 84.038047] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 84.038093] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 84.038105] systemd[1]: Starting LVM2 metadata daemon socket.
[ 84.038449] systemd[1]: Mounting POSIX Message Queue File System...
[ 84.038814] systemd[1]: Mounting Huge Pages File System...
[ 84.047018] systemd[1]: Mounting Temporary Directory...
[ 84.047650] systemd[1]: Mounting Debug File System...
[ 84.047782] systemd[1]: Created slice User and Session Slice.
[ 84.047800] systemd[1]: Starting User and Session Slice.
[ 84.047842] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 84.047853] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 84.062947] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 84.078080] systemd[1]: Listening on Journal Audit Socket.
[ 84.078577] systemd[1]: Starting Journal Service...
[ 84.078632] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 84.078649] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 84.078660] systemd[1]: Reached target Slices.
[ 84.078668] systemd[1]: Starting Slices.
[ 84.078800] systemd[1]: Created slice system-getty.slice.
[ 84.078810] systemd[1]: Starting system-getty.slice.
[ 84.078864] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 84.078874] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 84.078981] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 84.078993] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 84.079983] systemd[1]: Starting Set Up Additional Binary Formats...
[ 84.080478] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 84.080516] systemd[1]: Reached target Encrypted Volumes.
[ 84.080533] systemd[1]: Starting Encrypted Volumes.
[ 84.081080] systemd[1]: Starting Setup Virtual Console...
[ 84.081888] systemd[1]: Starting Load Kernel Modules...
[ 84.081939] systemd[1]: Listening on Delayed Shutdown Socket.
[ 84.081956] systemd[1]: Starting Delayed Shutdown Socket.
[ 84.082017] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 84.082029] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 84.082072] systemd[1]: Listening on udev Kernel Socket.
[ 84.082083] systemd[1]: Starting udev Kernel Socket.
[ 84.082551] systemd[1]: Starting udev Coldplug all Devices...
[ 84.083426] systemd[1]: Mounted Debug File System.
[ 84.083453] systemd[1]: Mounted POSIX Message Queue File System.
[ 84.083470] systemd[1]: Mounted Huge Pages File System.
[ 84.083500] systemd[1]: Mounted Temporary Directory.
[ 84.083682] systemd[1]: Started Remount Root and Kernel File Systems.
[ 84.084018] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 84.089010] systemd[1]: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 146 (systemd-binfmt)
[ 84.096129] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 84.096178] systemd[1]: Started Rebuild Dynamic Linker Cache.
[ 84.096217] systemd[1]: Started First Boot Wizard.
[ 84.097086] systemd[1]: Starting Load/Save Random Seed...
[ 84.098481] systemd-journald[145]: Failed to set file attributes: Inappropriate ioctl for device
[ 84.098584] systemd[1]: Started Rebuild Hardware Database.
[ 84.098618] systemd[1]: Started Create System Users.
[ 84.099157] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 84.099573] systemd[1]: Activating swap /swapfile...
[ 84.100516] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 84.102641] vboxdrv: Found 4 processor cores.
[ 84.107486] vboxdrv: fAsync=0 offMin=0x2eb offMax=0x2621
[ 84.107551] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 84.107552] vboxdrv: Successfully loaded version 4.3.26_OSE (interface 0x001a000a).
[ 84.108014] systemd[1]: Started Load Kernel Modules.
[ 84.108184] systemd[1]: Started udev Coldplug all Devices.
[ 84.108240] systemd[1]: Mounted FUSE Control File System.
[ 84.108594] systemd[1]: Starting Apply Kernel Variables...
[ 84.109083] systemd[1]: Mounting Configuration File System...
[ 84.110731] systemd[1]: Started Set Up Additional Binary Formats.
[ 84.112492] systemd[1]: Mounted Configuration File System.
[ 84.114000] systemd[1]: Started Load/Save Random Seed.
[ 84.145783] Adding 102396k swap on /swapfile. Priority:-1 extents:1 across:102396k SSFS
[ 84.145846] systemd[1]: Activated swap /swapfile.
[ 84.145888] systemd[1]: Reached target Swap.
[ 84.145899] systemd[1]: Starting Swap.
[ 84.269011] systemd[1]: Started Apply Kernel Variables.
[ 84.297839] systemd[1]: Started Create Static Device Nodes in /dev.
[ 84.298480] systemd[1]: Starting udev Kernel Device Manager...
[ 84.298502] systemd[1]: Reached target Local File Systems (Pre).
[ 84.298517] systemd[1]: Starting Local File Systems (Pre).
[ 84.308489] systemd[1]: Started Setup Virtual Console.
[ 84.361659] systemd[1]: Started udev Kernel Device Manager.
[ 84.407676] systemd[1]: Started Journal Service.
[ 84.427402] systemd-journald[145]: Received request to flush runtime journal from PID 1
[ 84.431669] [drm] Initialized drm 1.1.0 20060810
[ 84.435649] random: nonblocking pool is initialized
[ 84.484700] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 84.531880] cfg80211: Calling CRDA to update world regulatory domain
[ 84.535985] ACPI Warning: SystemIO range 0x0000000000004040-0x000000000000405f conflicts with OpRegion 0x0000000000004040-0x000000000000404f (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-258)
[ 84.535994] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 84.548611] Intel(R) Wireless WiFi driver for Linux
[ 84.548614] Copyright(c) 2003- 2014 Intel Corporation
[ 84.553829] sound hdaudioC0D0: autoconfig for ALC3239: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 84.553832] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 84.553834] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 84.553835] sound hdaudioC0D0: mono: mono_out=0x0
[ 84.553836] sound hdaudioC0D0: inputs:
[ 84.553838] sound hdaudioC0D0: Mic=0x19
[ 84.553840] sound hdaudioC0D0: Internal Mic=0x12
[ 84.582647] iwlwifi 0000:02:00.0: loaded firmware version 25.15.12.0 op_mode iwlmvm
[ 84.593153] input: HDA Digital PCBeep as /devices/pci0000:00/Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Windows Accessibility settings
* Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
* http://kb.mozillazine.org/Website_colors_are_wrong -
How can I add the requester name in the To: field of the email generated when a Smart Card certificate is issued on his behalf.
I want to address the possibility of someone (Enrollment Agent) issuing a Smart Card certificate on behalf of a user, assign a PIN and use it without the user's knowledge.
There doesn't seem to be a way in the registry to define a variable to be used in a manner similar to the TitleArg & TitleFormat way of using %1.
Jamal Saket OSFI CanadaHi,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Description:
A specific group of users/customers (using Windows7 OS with IE and FireFox web browsers) are facing problems with retrieving the applet File, after they upgraded the JRE on the system(PC) to JRE 1.7.0_25-b17 from JRE version 1.6.0_29-b11.
With JRE 1.7.0_25-b17 it is noticed that when the Java plugin requests for the applet File; it sends a request to the Domain Controller of the user, which causes a delay of 2 to 5 minutes and sometimes hangs. The problem occurs consistently.
The current temporary workaround for this group of users is to use JRE version 1.6.0_29-b11.
Problem analysis:
To investigate the problem the below steps were executed:
1) Collected the Java console outputbelow details from the user's system. (The complete output is not posted due to lengthy content, though can be added further to this post if required.)
(a) Works fine with JRE version 1.6.0_29-b11. Kindly refer to Java console output in the code ‘section A’ towards the end of this post.
(b) The problem occurs with problem with JRE version 1.7.0_25-b17. Kindly refer to Java console output in the code ‘section B’ towards the end of this post. The step where the problem is observed, is indicated as(##<comment>##).
2) The network settings in the user's browser was checked. Internet Options > Connections > LAN setting
The configured option is 'Use automatic configuration script' and the value is http://www.userAppX.com/proxy.pac
This configuration remains the same irrespective of the JRE version in use.
3) The network settings in the Java Control Panel was checked.
The used/selected option is "Use browser settings", although values for 'Use proxy server' and 'use automatic proxy configuration script' are filled-in as 'user-proxy.com' and 'http://www.userAppX.com/proxy.pac' respectively.
This configuration remains the same irrespective of the JRE version in use.
4) The proxy PAC file was checked and debugging was done for the request 'https://myAppletHost.com/download/...'. The FindProxyForUrl function (including the conditions defined in it, for the hostname and domain checks) returns PROXY user-proxy.com:80
5) The user also tried the below
a. Changed the option in the network settings in the browser to 'Proxy server' with Address 'user-proxy.com' and Port '80'
b. Restarted the browser.
c. Tried with Java Plug-in 1.6.0_29, JRE version 1.6.0_29-b11. There was no problem and no request to the Domain Controller of the user.
d. Tried with Java Plug-in 10.40.2.43, JRE version 1.7.0_40-b43. The problem occurs with the delay and a request to the Domain Controller of the user is observed.
Kindly refer to Java console output in the code ‘section C’ towards the end of this post.
6) The user also tried setting the below property in the Java Control panel; restarted the browser, and try with JRE 1.7.0_40-b43. The problem stil persists.
-Djava.net.preferIPv4Stack=true
7) The Global Policy Management of the Domain Controller was verified by the user. It has GPO for proxy setting but nothing related to Java security.
Questions:
The problem seems be specific to a particular (user) environment setup, and the user faces the problem when using JRE 1.7.
We would like to know if the issue is in the (user) environment setup or in JRE 1.7.
Could you please help with information/ideas/suggestions to identify the root cause and solution for this problem?
Section A:
Java Plug-in 1.6.0_29
Using JRE version 1.6.0_29-b11 Java HotSpot(TM) Client VM
User home directory = C:\Users\userA
basic: Plugin2ClassLoader.addURL parent called for https://myAppletHost.com/download/myApplet.jar
network: Connecting https://myAppletHost.com/download/myApplet.jar with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-b1bb5056c5b0e83f=2; Path=/"
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-b1bb5056c5b0e83f=2; Path=/"
security: Loading Root CA certificates from C:\Program Files (x86)\Java\jre6\lib\security\cacerts
security: Loaded Root CA certificates from C:\Program Files (x86)\Java\jre6\lib\security\cacerts
security: Loading SSL Root CA certificates from C:\Program Files (x86)\Java\jre6\lib\security\cacerts
security: Loaded SSL Root CA certificates from C:\Program Files (x86)\Java\jre6\lib\security\cacerts
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Loading certificates from Internet Explorer ROOT certificate store
security: Loaded certificates from Internet Explorer ROOT certificate store
security: Checking if certificate is in Deployment denied certificate store
network: Connecting https://myAppletHost.com/download/myApplet.jar with cookie "JSESSIONID=0000IK4bEMoqXH10zsl88rwvoRI:175oe9tjd; BCSI-CS-b1bb5056c5b0e83f=2"
network: Downloading resource: https://myAppletHost.com/download/myApplet.jar
Content-Length: 403.293
Content-Encoding: null
Dump system properties ...
https.protocols = TLSv1,SSLv3
java.vm.info = mixed mode, sharing
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Sun Microsystems Inc.
java.vm.specification.version = 1.0
java.vm.vendor = Sun Microsystems Inc.
java.vm.version = 20.4-b02
javaplugin.nodotversion = 160_29
javaplugin.version = 1.6.0_29
javaplugin.vm.options =
os.arch = x86
os.name = Windows 7
os.version = 6.1
trustProxy = true
deployment.proxy.auto.config.url = http://www.userAppX.com/proxy.pac
deployment.proxy.bypass.local = false
deployment.proxy.http.host = user-proxy.com
deployment.proxy.http.port = 80
deployment.proxy.override.hosts =
deployment.proxy.same = false
deployment.proxy.type = 3
deployment.security.SSLv2Hello = false
deployment.security.SSLv3 = true
deployment.security.TLSv1 = true
deployment.security.mixcode = ENABLE
Section B:
Java Plug-in 10.25.2.17
Using JRE version 1.7.0_25-b17 Java HotSpot(TM) Client VM
User home directory = C:\Users\userA
basic: Added progress listener: sun.plugin.util.ProgressMonitorAdapter@12adac5
basic: Plugin2ClassLoader.addURL parent called for https://myAppletHost.com/download/myApplet.jar
network: Connecting https://myAppletHost.com/download/myApplet.jar with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-2d4ce94a2ae7b460=2; Path=/"
network: Connecting http://10.x.x.xx:53/ with proxy=DIRECT
(##THE ABOVE REQUEST CAUSES THE DELAY OR HANGS##)
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-2d4ce94a2ae7b460=2; Path=/"
security: Loading Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loaded Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loading SSL Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loaded SSL Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loading certificates from Deployment session certificate store
security: Loaded certificates from Deployment session certificate store
security: Loading certificates from Internet Explorer ROOT certificate store
security: Loaded certificates from Internet Explorer ROOT certificate store
network: Connecting https://myAppletHost.com/download/myApplet.jar with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-2d4ce94a2ae7b460=2; Path=/"
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-2d4ce94a2ae7b460=2; Path=/"
network: Connecting https://myAppletHost.com/download/myApplet.jar with cookie "JSESSIONID=0000UQuXWY5tjxjpwcKHlfJKe_8:175oe9j45; BCSI-CS-2d4ce94a2ae7b460=2"
network: ResponseCode for https://myAppletHost.com/download/myApplet.jar : 200
network: Encoding for https://myAppletHost.com/download/myApplet.jar : null
network: Server response: (length: -1, lastModified: Thu Feb xx yy:yy:yy CET 2013, downloadVersion: null, mimeType: text/plain)
network: Downloading resource: https://myAppletHost.com/download/myApplet.jar
Content-Length: -1
Content-Encoding: null
Section C:
Java Plug-in 10.40.2.43
Using JRE version 1.7.0_40-b43 Java HotSpot(TM) Client VM
User home directory = C:\Users\userA
basic: Plugin2ClassLoader.addURL parent called for https://myAppletHost.com/download/myApplet.jar
network: Connecting https://myAppletHost.com/download/myApplet.jar with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-1d67c8b6508ca09c=2; Path=/"
network: Connecting http://10.x.x.xx:53/ with proxy=DIRECT
(##THE ABOVE REQUEST CAUSES THE DELAY OR HANGS##)
network: Checking for update at: https://javadl-esd-secure.oracle.com/update/blacklist
network: Checking for update at: https://javadl-esd-secure.oracle.com/update/blacklisted.certs
network: Checking for update at: https://javadl-esd-secure.oracle.com/update/baseline.version
network: Connecting https://javadl-esd-secure.oracle.com/update/blacklist with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Connecting https://javadl-esd-secure.oracle.com/update/baseline.version with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Connecting https://javadl-esd-secure.oracle.com/update/blacklisted.certs with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
security: Loading Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loaded Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loading SSL Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
security: Loaded SSL Root CA certificates from C:\Program Files (x86)\Java\jre7\lib\security\cacerts
Dump system properties ...
https.protocols = TLSv1,SSLv3
java.vm.info = mixed mode, sharing
java.vm.name = Java HotSpot(TM) Client VM
java.vm.specification.name = Java Virtual Machine Specification
java.vm.specification.vendor = Oracle Corporation
java.vm.specification.version = 1.7
java.vm.vendor = Oracle Corporation
java.vm.version = 24.0-b56
javaplugin.nodotversion = 10402
javaplugin.version = 10.40.2.43
os.arch = x86
os.name = Windows 7
os.version = 6.1
trustProxy = true
active.deployment.proxy.auto.config.url = http://www.userAppX.com/proxy.pac
active.deployment.proxy.bypass.local = false
active.deployment.proxy.http.host = user-proxy.com
active.deployment.proxy.http.port = 80
active.deployment.proxy.same = false
active.deployment.proxy.type = 3
deployment.browser.path = C:\Program Files (x86)\Internet Explorer\iexplore.exe
deployment.proxy.auto.config.url = http://www.userAppX.com/proxy.pac
deployment.proxy.bypass.local = false
deployment.proxy.http.host = user-proxy.com
deployment.proxy.http.port = 80
deployment.proxy.override.hosts =
deployment.proxy.same = false
deployment.proxy.type = 3
deployment.security.SSLv2Hello = false
deployment.security.SSLv3 = true
deployment.security.TLSv1 = true
deployment.security.TLSv1.1 = false
deployment.security.TLSv1.2 = false
deployment.security.authenticator = true
deployment.security.disable = false
deployment.security.level = HIGH
deployment.security.mixcode = ENABLE
PS:
Since the JRE 1.7.0_25-b17 update, it is noticed that when the Java plugin requests for the applet File; it sends a request to the Domain Controller of the user, which causes a delay of 2 to 5 minutes and sometimes hangs.
The problem occurs consistently, and also with JRE 1.7.0_45-b18.
Java Plug-in 10.45.2.18
Using JRE version 1.7.0_45-b18 Java HotSpot(TM) Client VM
User home directory = C:\Users\userA
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
cache: Initialize resource manager: com.sun.deploy.cache.ResourceProviderImpl@134a33d
basic: Added progress listener: sun.plugin.util.ProgressMonitorAdapter@1971f66
basic: Plugin2ClassLoader.addURL parent called for https://myAppletHost.com/download/myApplet.jar
network: Connecting https://myAppletHost.com/download/myApplet.jar with proxy=HTTP @ user-proxy.com/194.xxx.xx.xx:80
network: Server https://myAppletHost.com/download/myApplet.jar requesting to set-cookie with "BCSI-CS-f797d4d262467220=2; Path=/"
network: Connecting http://10.x.x.xx:53/ with proxy=DIRECT
network: Connecting http://10.x.x.xx:53/ with proxy=DIRECT
(##THE ABOVE REQUEST CAUSES THE DELAY AND SOMETIMES HANGS##)My organization is experiencing very similar problems. We have resolved it through several steps.
We upgraded the client to Java 8 and we saw in the console that the hanging connection with the Domain Controller no longer occurs. This may be all that is necessary for your environment as well. -
TMG - 0x80090325 -Certificate Chain was issued by an authority that is not trusted
Hello,
I am having some problems with testing a OWA (SSL) rule. I get that message.
The TMG belongs to the domain and therefore as far as I know it gets the root certificate of my CA (I have deployed a Enterprise CA for my domain).
That is why I don't understand the message: "...that is not trusted."
The exact message:
Testing https://mail.mydomain.eu/owa
Category: Destination server certificate error
Error details: 0x80090325 - The certificate chain was issued by an authority that is not trusted
Thanks in advance!
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain)Thanks Keith for your reply and apologies for the delay in my answer.
I coud not wait and I reinstalled the whole machine (W28k R2 + TMG 2010) . I suppose I am still a bad troubleshooter, I have experience setting up ISA, TMG, PKI, Active directory but to a certain extent.
1. Yes, I saw it when hitting the button "Test Rule" in the Publising rule in the TMG machine.
2. No, it did not work in this implementation but it has worked in others, this is not difficult to set up, until now, hehe.
3. You said: "...If you are seeing it when running "Test Rule" then it simply means that TMG does not trust something about the certificate that is on your Exchange Server...."
But the certificates are auto-enrolled, and when I saw the details of the certificates they all are "valid" , there is a "valid" message.
4. You wrote: "...Easiest way see everything is create an access rule that allows traffic from the LocalHost of TMG to the CAS and open up a web browser. Does the web browser complain?..."
But as I said, I re-installed the whole thing because nobody jumped in here , and I needed to move forward, I hope you understand.
5. S Guna kindly proposed this:
If you are using internal CA,
You need to import the Root CA certificate to TMG servers.
Import Private Key of the certificate to Server personal
Create a Exchange publishing Rule and Point the lisitner to the Correct certificate.
Since you are using internal CA, You need to import the Root CA certificate to all the client browers from where you are accessing OWA
But I think I do not have to perform any of those tasks, although I am not an expert but have worked with Certificate for one year or so.
Luis Olías Técnico/Admon Sistemas . Sevilla (España - Spain) -
Certificate Not Verified for Wifi WPA Enterprise
Hi all
I have a MDM server to deploy profile to all enrolled devices (iPhone4s, iPad...etc) for wifi setting (WPA2 PEAP SSID: M_WEP_ENT).
But I found one issue, if users have ever connected to M_WEP_ENT and accepted Certificate.
After deploying profile to the users' devices, it shows "Not Verified" in Certificate while these users try to connect the wifi with specified SSID.
And I also install this profile with iPCU, but there is no this problem, iOS just directly to ask users for input user/password again.
The following is my profile plist setting, does any idea for this issue ?
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<array>
<dict>
<key>AuthenticationMethod</key>
<string>directory</string>
<key>AutoJoin</key>
<false/>
<key>EAPClientConfiguration</key>
<dict>
<key>AcceptEAPTypes</key>
<array>
<integer>25</integer>
<integer>21</integer>
</array>
<key>EAPFASTProvisionPAC</key>
<false/>
<key>EAPFASTProvisionPACAnonymously</key>
<false/>
<key>EAPFASTUsePAC</key>
<false/>
<key>OneTimePassword</key>
<true/>
<key>OneTimeUserPassword</key>
<true/>
<key>OuterIdentity</key>
<string></string>
<key>SystemModeCredentialsSource</key>
<string>ActiveDirectory</string>
<key>TLSAllowTrustException</key>
<true/>
<key>TTLSInnerAuthentication</key>
<string>MSCHAPv2</string>
<key>UserName</key>
<string></string>
<key>UserPassword</key>
<string></string>
</dict>
<key>EncryptionType</key>
<string>WPA</string>
<key>HIDDEN_NETWORK</key>
<false/>
<key>Interface</key>
<string>BuiltInWireless</string>
<key>Password</key>
<string></string>
<key>PayloadDescription</key>
<string></string>
<key>PayloadDisplayName</key>
<string>WiFi (M_WPA_ENT)</string>
<key>PayloadEnabled</key>
<true/>
<key>PayloadIdentifier</key>
<string>com.test.wifi.config</string>
<key>PayloadOrganization</key>
<string>test</string>
<key>PayloadType</key>
<string>com.apple.wifi.managed</string>
<key>PayloadUUID</key>
<string>c20997cf-e696-4d48-b685-c88c3633d4a2</string>
<key>PayloadVersion</key>
<integer>1</integer>
<key>ProxyType</key>
<string>None</string>
<key>SSID_STR</key>
<string>M_WPA_ENT</string>
<key>SetupModes</key>
<array>
<string>System</string>
</array>
</dict>
</array>
</plist>
The following is the error log from iPCU console while users to click "Accept" "Not Verified" Certificate:
Jul 10 11:53:06 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Transaction completed. Status: 200
Jul 10 11:53:06 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Attempting to perform MDM request: DeviceInformation
Jul 10 11:53:06 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Command Status: Acknowledged
Jul 10 11:53:06 Miller-iPhone4s Preferences[5566] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from to (null)
Jul 10 11:53:06 Miller-iPhone4s Preferences[5566] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x160200:<VPNBundleController: 0x160200>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
Jul 10 11:53:07 Miller-iPhone4s eapolclient[5579] <Notice>: en0 START
Jul 10 11:53:07 Miller-iPhone4s wifid[547] <Error>: WiFi:[363585187.064848]: Processing link event DOWN
Jul 10 11:53:07 Miller-iPhone4s wifid[547] <Error>: WiFi:[363585187.224358]: Processing link event UP
Jul 10 11:53:07 Miller-iPhone4s configd[14] <Notice>: LINKLOCAL en0: parent has no IP
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AppleBCMWLANCore::setDISASSOCIATE() [wifid]:
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AppleBCMWLAN Left BSS: @ 0xc0cbc200, BSSID = 00:21:e9:b8:67:b2, rssi = -61, rate = 54 (100%), channel = 10, encryption = 0x8, ap = 1, failures = 0, age = 0, ssid[13] = "HMDM QA Apple"
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AppleBCMWLANCore::setASSOCIATE() [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA2_8021X, key = CIPHER_NONE , 802.1X .
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: [177104.488024000]: AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AppleBCMWLAN Joined BSS: @ 0xc0ff4600, BSSID = 1c:aa:07:17:d3:a0, rssi = -63, rate = 54 (100%), channel = 11, encryption = 0xc, ap = 1, failures = 0, age = 11, ssid[ 6] = "M_WPA_ENT"
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AirPort: Link Up on en0
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: en0: BSSID changed to 1c:aa:07:17:d3:a0
Jul 10 11:53:07 Miller-iPhone4s configd[14] <Notice>: network configuration changed.
Jul 10 11:53:07 Miller-iPhone4s UserEventAgent[12] <Warning>: DEBUG: Changing WiFi state: 0
Jul 10 11:53:07 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Network reachability has changed.
Jul 10 11:53:07 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Network reachability has changed.
Jul 10 11:53:07 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Scheduling poll of MDM server.
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:]: User Information required
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Warning>: -[<CALayer: 0xd5ecaf0> display]: Ignoring bogus layer size (320.000000, 34359738368.000000)
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSaveGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetPatternPhase: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextGetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextFillRects: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetPatternPhase: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextGetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextFillRects: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextRestoreGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSaveGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextAddPath: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: clip: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextGetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextFillRects: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextRestoreGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSaveGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineWidth: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineJoin: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineCap: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetMiterLimit: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFlatness: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextAddPath: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextDrawPath: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextRestoreGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSaveGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineWidth: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineJoin: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineCap: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetMiterLimit: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFlatness: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextAddPath: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextDrawPath: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextRestoreGState: invalid context 0x0
Jul 10 11:53:08 Miller-iPhone4s kernel[0] <Debug>: AppleBCMWLANCore:startRoamScan(): 2949 Delaying RoamScan; because Join Mgr Busy 0 isWaitingforIP 1this TOTALLY fixed the problem for me
(which started i believe when i deleted the cache, cookies and security settings stuff in camino, sometimes apparently the certificates don't like, preserve themselves or something...):
http://support.rhombic.net/knowledge-base/articles/no-root-certificate-with-mail -app
follow the download links...
and also
https://knowledge.verisign.com/support/ssl-certificates-support/index?page=conte nt&id=SO4785&actp=LIST
(follow the first instruction under the resolution heading)
I don't know actually if this last link above is helpful but i did it anyways. If you find out, let me know!
once these have been downloaded to your desktop, double-clicking them automatically opens keychain. Be sure to put them into your X509 Anchors...
It hasn't resolved everything, but the major websites, its made EVERYTHING a lot easier. and no, i don't want to Archive and Install. -
Delay viewing archivelink images held in SAP content server
Hi,
We have implemented an indexing solution utilising SAP Archivelink and Content server. We are noting considerable delays when viewing documents, this only happens for the first document in a transaction and can take up to 6 minutes to display a document. As our users have a person on the telephone at the time this results in alot of smalltalk which is not desireable.
Does anyone know of any performance issues related to document storage in content server?
Many Thanks,
Pete Whitehi,
The SAP Content Server is the server at the core of SAPu2019s document storage and management concept. It provides the technical infrastructure for all document-centric applications and business scenarios that do not require long-term document archivingu201D
SAP Integration points
SAP Document Management system (DMS), and SAP Knowledge Warehouse.
U could achieve your requirement easily
SAP Content Server u2013 Features
Ability to create file system and database repositories.
Support for security certificates (secure key).
Ability to lock down the files on the content repositories.
Images can be displayed using the ECL viewer or desktop applications via Internet Explore.
Benakaraj
??P -
Is possible to get scan file of Certificate right away?
I just need a prove that I passed for the test.
6-8 weeks of delivery time is too much, don't you think?
Is there a way I just get a scan of OCP Certification file right away?I just need a prove that I passed for the test.There should have been a sheet that printed out when your test was complete. That is your immediate proof that you passed the test. I use this all the time to get reimbursed by my company for the price of taking certification tests.
6-8 weeks of delivery time is too much, don't you think?Getting a certificate in the mail has never taken more than a couple of weeks for me. However, I live in the US. Most of the delay is not Oracle but rather the delivery time getting it through mail services in various countries. The can also be some delay if there is a need to verify hands-on training from a third-party provider.
Is there a way I just get a scan of OCP Certification file right away?If you log in to Certview (if you don't already have an account you should register as soon as you finish reading this post). From there is an option called 'Publish to 3rd Parties'. This can send proof of your certification to whoever you wish.
You can also request an electronic copy of your certificate. I had thought you could via Certview, but apparently it requires creating an SR. You can create one here:
http://education.oracle.com/pls/eval-eddap-dcd/OU_SUPPORT_OCP.home?p_source=OCP -
Missing Shadow of Mordor pre order certificates
I am a gamers club unlocked member and pre ordered Shadow of Mordor. I picked it up on release day but have yet to receive my certs. What should I do?
Hello bfowlaaa,
Thank you for purchasing Shadow of Mordor from Best Buy, and thank you too for being a Gamers Club Unlocked member! We appreciate your loyalty and I hope we can continue to be your best destination for gaming.
We have been made aware of a delay in processing that has affected customers who purchased Shadow of Mordor and are eligible for the $10 certificate. We expect that points will be distributed by the end of this week. Thank you for your extra patience as this is cleared up.
Sincerely,
Mike|Social Media Specialist | Best Buy® Corporate
Private Message -
RESOLVED On Premises (intranet use only) Exchange Certificate Help (Please)!
I apologize in advance for what may end up being a very silly issue.
I have racked my brain and read and searched and I still can't seem to find the answer to my question.
I have an in house Exchange server that is only accessible internally. We do not have external clients (laptops/tablets/etc) and all computers stay on premises. Most of our clients use OWA to access email. Everything has been working fine up until about
2 weeks ago when everybody started getting a certificate error. I have tried every thing I can find to fix this issue to no avail. It seems the thumbprint of the certificate is different each time I visit the exchange server (https://exchange/owa). So I can
install the certificate which works for a few minutes and then it prompts me again. When looking at the thumb print of each instance, everything seems to be exactly the same with the exception of the thumbprint.
My first question, is do I still need to go through a CA even though this server is not accessible via external IP?
Where are my clients getting the certificate they are trying to install because they do not match the certificate that is installed on the Exchange Server.
Thank you in advance for anybody that can steer me in the right direction to getting this resolved.
I support this site remotely so any additional info can be provided but there might be a small delay.First, thank you for taking the time to respond.
"I'm going to assume that you have some sort of PKI infrastructure with in your environment."
I'm not sure I do. This project landed in my lap a few years ago. This particular client is my only client
with exchange. I have limped my way though to this point but I'm afraid I'm just not clear on what it is I actually need.
We are running Exchange 2013 on a Server 2008 box. Everything worked fine up until about 2 weeks ago. I have no idea what changed.
I think my biggest problem is my lack of understanding of where the client is pulling the certificate when I access the intranet site. I don't understand why the certificate (whether valid or not) isn't matching the certificate within IIS/Exchange admin.
Hi,
I think you can check your certificate information and provide the information here for more help. Please run the following command in Exchange Management Shell:
Get-ExchangeCertificate | fl
Additionally, since the certificate issue occurs when accessing Exchange server from OWA, please check the OWA configuration in your Exchange:
Get-OwaVirtualDirectory | FL Identity,*Authentication*,*url*
Generally, the namespace used in the OWA URL should be included in the Exchange certificate which is assigned with IIS service.
Regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Winnie Liang
TechNet Community Support -
Certificate Services: CA-Xchg certificate renewal ignoring configuration settings
Hi
I'm seeing a problem with CA-Xchg renewal and I'm hoping someone can help. This is on w2k3 r2 SP2 CA machine that's attached to an HSM.
The first time the CA issues itself the CA-Xchg certificate, it used all the correct settings (key length=2048, EncryptionCSP=<HSM vendor>, etc). The CA-Xchg certificate & keys are in the HSM so everything is fine.
However, all other CA-xchg certificates since the very first one, now completely ignore the configured registry settings on the CA. These renewed CA-Xchg certificates keep the public/private keys locally on the OS and use a smaller key length (1024).
This behavior was not seen in previous testing.
The CRLFlag CRLF_USE_XCHG_CERT_TEMPLATE is not configured. as a precaution the CA exchange template has the same key length And CSP settings as the CA's registry (even though these settings are ignored if using the CA exchange template).
The strangest thing is that the CA is still happily using/accessing it's CA keys in the HSM when signing certificates, publishing CRLs, etc, so it's not an "access to the HSM" problem. That and the very first CA-xchg certificate used the HSM fine.
The CA is being used to issue certs for CLM so the CLM policy and exit modules are installed. I don't think this is doing anything as the policy module is configured to pass all non-CLM cert requests to the windows default policy module.
is there some sort of "hard wired" default setting the this CA is reverting back to (for whatever reason) instead of what is configured in the registry?
Setting the KRAFlag KRAF_DISABLEUSEDEFAULTPROVIDER isn't an option as that flag was added with 2008. it's not available in 2003
any help, ideas, etc, is much appreciated
cheers
ToddHi,
Thank you for your question.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
TechNet Subscriber Support
If you are
TechNet Subscription
user and have any feedback on our support quality, please send your feedback
here.
Regards, Yan Li -
IPSec Certificate Authentication from Linux Strongswan client to Windows Advanced Firewall (2012)
Hi,
Has anybody had any success in getting a Linux Strongswan client (or Openswan) to connect to a win2012 Advanced Firewall using certificates and IPSec? My Security Connection Rule requires authentication both inbound and outbound. The cert is
installed correctly on the Linux box.
I can get a connection using pre-shared keys, but haven't been able to establish a Quick Mode session when using certs. I've tried (literally) hundreds of different configs without success. Event log shows either 'No Policy Configured' or 'Unknown
Authentication'.
Windows clients can connect correctly with certs. I've deliberately excluded details as the Linux config can be setup in so many different ways, i'd rather start by looking at someone elses config that works (if that actually exists).
Thanks
MickHi,
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thanks for your understanding and support.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Problem installing SSL certificate for CPS
I work at a medium-sized University, and we have used
Contribute 3 with CPS1.11 for well over a year. Recently, however,
the Contribute clients began having difficulty logging in to CPS.
At first this was intermittent, but is now constant. Adobe support
suggested replacing the CPS self-signed SSL certificate with a
genuine one, because apparently the self-signed certificate is
causing communication delays and timeouts.
I have the certificate, and am trying to use keytool (see
http://java.sun.com/j2se/1.4.2/docs/tooldocs/windows/keytool.html)
to install it, but it is asking me for a keystore password, which I
don't know. Apparently the standard defaults are "changeit" or
"passphrase", but neither of these work.
As a test, I created a fresh install of CPS and attempted to
list the keys in the keystore, but again was asked for a keystore
password and the defaults did not work. Adobe support suggested I
ask here. Anybody have any experience installing a certificate for
CPS?Are you sure that the certificate needs to be installed to all users? Can you provide more details about the certificate and its purposes?
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new:
SSL Certificate Verifier
Check out new:
PowerShell FCIV tool.
Maybe you are looking for
-
Free goods - Exclusive - Quantity of free goods
I want to give free goods by the condition record I have made at the tcode VBN1. Free godds will be given by the exclusive technique. The material code of the main material with active prcing is 100005 and the material that I will give as free good i
-
Unable to perform multi audio tracks mixing with Audio Mixer
How do you get a simple multi track mix with the Premier Pro 1.5 Audio Mixer? I got 2 audio clips, each sitting at the start of its own separate track (Audio 1 and Audio 2). I just want to mix them into the Master track. Simple enough. So I go to th
-
Can't see whole message in iMessage?
How do you see the whole screen in iMessage after looking at it?
-
All email accounts disappeared
I have a bunch of email accounts on my Mac Mail. I had just sent off one, looked away, and all of a sudden all of my accounts disappeared! I kept looking for a way to open them - but nothing. And then I tried to reboot. As I was closing it down I got
-
HI We get the usage decision via IDOC to SAP from LIMS Due to some technical issue for one inspection lot,only the status UD got updated to the inspection lot ,stock posting ,valuation codes etc are blank and not updated Now the stock is stuck in qua